Hello Guest User, You are visiting this website from a computer with an IP address of 172.70.178.174 with the name of '?' since Tue Apr 23, 2024 at 5:02:08 AM PT for approx. 0 minutes now.
Sheahan Diamond Literature Technical Reference Compilation 2016
The Sheahan Diamond Literature Reference Compilation
The Sheahan Diamond Literature Reference Compilation is compiled by Patricia Sheahan who publishes on a monthly basis a list of new scientific articles related to diamonds as well as media coverage and corporate announcementscalled the Sheahan Diamond Literature Service that is distributed as a free pdf to a list of followers. Pat has kindly agreed to allow her work to be made available as an online digital resource at Kaiser Research Online so that a broader community interested in diamonds and related geology can benefit. The references are for personal use information purposes only; when available a link is provided to an online location where the full article can be accessed or purchased directly. Reproduction of this compilation in part or in whole without permission from the Sheahan Diamond Literature Service is strictly prohibited. Return to Diamond Resource Center
Sheahan Diamond Literature Reference Compilation - Scientific Articles by Author for all years
The SDLRC provides 3 types of references identified in the reference code. DS for scientific article, DM for a media article, and DC for a corporate announcement. Consider DS0512-0001. The DS stands for "diamond scientific". 05 stands for 2005, the year the reference was posted. 12 represents the month the reference was posted. For all years prior to 2015 the default month is 12. -0001 is the reference's identifier and it does not mean anything. The number below the refence code, ie 2015, is the year the article was published. Note that the posted year may sometimes be later than the published year.
Sort Order
References are sorted by the "author" name and when the reference was posted to the compilation.
Most Recent
If the reference code is highlighted yellow, the reference was made available through the most recent monthly compilation of new literature. Use this to check out new references. When new references are posted, we make it our priority to track down an online link and obtain an abstract. With regard to older references, tracking down an abstract and an online link is a work in progress.
Link to external location of article:
If the title has a link, it means we have found a location online where you can either retrieve the full article free, or purchase access to it. The Sheahan Diamond Literature Service is not a technical article procurement service; if you want a restricted article, you must deal directly with the vendor who controls the copyright to the article.
Searching this page for a specific term or author
In your Firefox browser click Edit in the menu bar and then Find. In the Find box that shows up at the bottom of the web page enter your search term. Firefox will highlight all occurrences. This is particularly helpful when the author you are seeking was not the lead author by whom the compilation is sorted.
Sending or sharing a reference
The left column (Posted/Published) has an embedded hyperlink for each reference. In Firefox, if you right click on it, you can obtain the link url for that reference's location within the page, which you can copy and paste into an email or any other document. You can also use the "share this link" option to tweet, facebook etc the link.
Abstract: Kimberlitic magmaclasts are discrete ovoid magmatic fragments that formed prior to emplacement from disrupted kimberlite magma. To provide new constraints on the origin and evolution of the kimberlite melts, we document the mineralogy and petrography of a magmaclast recovered from one of the ca. 520 Ma Venetia kimberlites, South Africa. The sample (BI9883) has a sub-spherical shape and consists of a ~ 10 mm diameter central olivine macrocryst, surrounded by porphyritic kimberlite. The kimberlitic material consists of concentrically aligned, altered olivine phenocrysts, set in a crystalline groundmass of calcite, chromite, perovskite, phlogopite, apatite, ilmenite, titanite, sulphides, rutile and magnetite along with abundant alteration phases (i.e. serpentine, talc and secondary calcite). These features are typical of archetypal hypabyssal kimberlites. We examined primary fluid/melt inclusions in chromite, perovskite and apatite containing a diversity of daughter phases. Chromite and perovskite host polycrystalline inclusions containing abundant alkali-carbonates (i.e. enriched in K, Na, Ba, Sr), phosphates, Na-K chlorides, sulphides and equal to lesser quantities of olivine, phlogopite and pleonaste. In contrast, apatite hosts polycrystalline assemblages with abundant alkali-carbonates and Na-K chlorides and lesser amounts of olivine, monticellite and phlogopite. Numerous solid inclusions of shortite (Na2Ca2(CO3)3), Na-Sr-carbonates and apatite occur in groundmass calcite along with fluid inclusions containing daughter crystals of Na-carbonates and Na-chlorides. The primary inclusions in chromite, perovskite and apatite are considered to represent remnants of fluid(s)/melt(s) trapped during crystallisation of the host minerals, whereas the fluid inclusions in calcite are probably secondary in origin. The component proportions of these primary fluid/melt inclusions were estimated in an effort to constrain the composition of the evolving kimberlite melt. These estimates suggest melt evolution from a silicate-carbonate kimberlite melt that became increasingly enriched in carbonates, phosphates, alkalis and chlorides, in response to the fractional crystallisation of constituent minerals (i.e. olivine to apatite). The concentric alignment of crystals around the olivine kernel and ovoid shape of the magmaclast can be ascribed to the low viscosity of the kimberlite melt and rapid rotation whilst in a liquid or partial crystalline state, or to progressive layer-by-layer growth of the magmaclast. Although the mineralogy of our sample is similar to hypabyssal kimberlites worldwide, it differs from hypabyssal kimberlite units in the main Venetia pipes, which contain monticellite-phlogopite rich assemblages and segregationary matrix textures. Therefore magmaclast BI9883 probably originated from a batch of magma distinct from those that produced known hypabyssal units within the Venetia kimberlite cluster.-
Abstract: We report on the Lu-Hf and Re-Os isotope systematics of a well-characterized suite of spinel and garnet pyroxenites from the Gföhl Unit of the Bohemian Massif (Czech Republic, Austria). Lu-Hf mineral isochrons of three pyroxenites yield undistinguishable values in the range of 336-338 Ma. Similarly, the slope of Re-Os regression for most samples yields an age of 327 ± 31 Ma. These values overlap previously reported Sm-Nd ages on pyroxenites, eclogites and associated peridotites from the Gföhl Unit, suggesting contemporaneous evolution of all these HT-HP rocks. The whole-rock Hf isotopic compositions are highly variable with initial ?Hf values ranging from ? 6.4 to + 66. Most samples show a negative correlation between bulk rock Sm/Hf and ?Hf and, when taking into account other characteristics (e.g., high 87Sr/86Sr), this may be explained by the presence of recycled oceanic sediments in the source of the pyroxenite parental melts. A pyroxenite from Horní Kounice has decoupled Hf-Nd systematics with highly radiogenic initial ?Hf of + 66 for a given ?Nd of + 7.8. This decoupling is consistent with the presence of a melt derived from a depleted mantle component with high Lu/Hf. Finally, one sample from Be?váry plots close to the MORB field in Hf-Nd isotope space consistent with its previously proposed origin as metamorphosed oceanic gabbro. Some of the websterites and thin-layered pyroxenites have variable, but high Os concentrations paralleled by low initial ?Os. This reflects the interaction of the parental pyroxenitic melts with a depleted peridotite wall rock. In turn, the radiogenic Os isotope compositions observed in most pyroxenite samples is best explained by mixing between unradiogenic Os derived from peridotites and a low-Os sedimentary precursor with highly radiogenic 187Os/188Os. Steep increase of 187Os/188Os at nearly uniform 187Re/188Os found in a few pyroxenites may be connected with the absence of primary sulfides, but the presence of minor late stage sulfide-bearing veinlets likely associated with HT-HP metamorphism at crustal conditions.
Abstract: Concentrations of H2O, F, Cl, C, P, and S have been measured by secondary ion mass spectrometry (SIMS) in experimentally produced peridotite phases (including clinopyroxene, orthopyroxene, olivine, garnet, amphibole, and mica) and coexisting basanitic glasses. Because only two experiments produced glasses on quenching (with the melt phase in others reverting to felt-like crystallite masses) H2O concentrations in melts were also separately determined from mass-balance relationships and by assuming constant H2O/La in melts and starting materials. The resulting values were used to calculate mineral/melt partition coefficients (D values) for H2O [where DH2Ocrystal/melt = (mass fraction of H2O in crystal)/(mass fraction of H2O in melt)] for conditions of 1025-1190 °C and 1.0-3.5 GPa. These gave 0.0064-0.0164 for clinopyroxene, 0.0046-0.0142 for orthopyroxene, 0.0015-0.0016 for olivine, and 0.0016-0.0022 for garnet. Although less information was obtained for the other volatiles, F was found to be significantly more compatible than H2O during peridotite melting, whereas Cl is significantly less compatible. S also has small but appreciable solubilities in amphiboles and micas, but not in pyroxenes or olivine. The solubility of C in silicate minerals appears to be negligible, although C was present in coexisting melts (~0.5 wt% as CO2) and as residual graphite during experiments. The D values for H2O in clinopyroxene and orthopyroxene are positively correlated with ivAl but negatively correlated with the H2O concentrations of melts (when considered as wt%). These relationships are consistent with the broad trends of previously published partitioning data. Although some of the concentration dependence can be related to cross-correlation between ivAl in pyroxenes and H2O concentrations in melts (via the latter’s control of liquidus temperatures) this relationship is too inconsistent to be a complete explanation. A concentration dependence for DH2Omineral/melt can also be independently predicted from speciation models for H2O in silicate melts. Thus it is likely that DH2Opyx/melt is influenced by both ivAl and the absolute concentration of H2O in melts. DH2O/DCe for clinopyroxene is inversely correlated with M2 site radii. Because the latter decrease with increasing pressure and temperature, relatively hot and/or deeply derived melts should be enriched in Ce relative to H2O when compared to melts from cooler and shallower mantle sources. Conversely, melts from H2O-rich settings (e.g., subduction zones) should have higher H2O/Ce than their source rocks. When combined with previously obtained partitioning data for non-volatile elements (from the same experiments), our data are consistent with the enrichment of intraplate basalt sources in both volatile and non-volatile incompatible elements by small-degree melts derived from local mid-ocean ridge basalt sources. In this way, volatiles can be seen to play an active role (via their promotion of partial-melting and metasomatic processes) in the auto-regulation of incompatible element concentrations in the depleted upper mantle.
Geophysical Journal International, Vol. 205, 3, pp. 1874-1885.
Technology
Alteration
Abstract: The influx of groundwater into hot kimberlite deposits results in the reaction of water with olivine-rich rocks. The products of the reaction are serpentine and release of latent heat. The rise of temperature due to the heat release increases the rate of the reaction. Under certain conditions, this self-speeding up of the reaction can result in instabilities associated with a significantly higher final serpentinisation in slightly warmer regions of the kimberlite deposit. We conduct linear stability analysis of serpentinisation in an isolated volume of porous kimberlitic rocks saturated with water and an inert gas. There is a counteracting interplay between the heat release tending to destabilise the uniform distribution of parameters and the heat conduction tending to stabilise it by smoothing out temperature perturbations. We determine the critical spatial scale separating the parameters where one phenomenon dominates over another. The perturbations of longer-than-critical length grow, whereas the perturbations of shorter-than-critical length fade. The analytical results of the linear stability analysis are supported by direct numerical simulations using a full nonlinear model.
Abstract: In recent years, several studies have focused on the growth conditions of the diamonds through the analysis of the mineral inclusions trapped in them. In these studies, it is crucial to distinguish between protogenetic, syngenetic and epigenetic inclusions. X-ray topography (XRDT) can be a helpful tool to verify, in a non-destructive way, the genetic nature of inclusions in diamond. With this aim, a diamond from the Udachnaya kimberlite, Siberia, was investigated. The diamond, previously studied by Nestola et al. (2011), has anomalous birefringence and the two largest olivines have typical “diamond-imposed” shapes. The study of the topographic images shows that the diamond exhibits significant deformation fields related to post growth plastic deformation. The absence of dislocations starting from the olivine inclusions, and the dark contrasts around them represent the main results obtained by XRDT, contributing to the elucidation of the relationships between the diamond and the olivines at the micron-meter scale. The dark halo surrounding the inclusions was likely caused by the effect of different thermo-elastic properties between the diamond and the inclusions. The absence of dislocations indicates that the diamond-imposed morphology did not produce the volume distortion commonly associated with the entrapment of the full-grown inclusions and, thus, only based on such evidence, a syngenetic origin could be proposed. In addition, stepped figures optically observed at the interface between diamond and one of the olivines suggest processes of selective partial dissolution that would contribute to a change in the final morphology of inclusions. These results show that a diamond morphology may be imposed to a full-grown (protogenetic) olivine during their encapsulation, suggesting that the bulk of the inclusion is protogenetic, whereas its more external regions, close to the diamond-inclusion interface, could be syngenetic.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, 11, Nov. pp. 3924-3945.
Mantle
Convection
Abstract: Numerical models show that small-scale convection (SSC) occurring atop a mantle plume is a plausible mechanism to rejuvenate the lithosphere. The triggering of SSC depends on the density contrast and on the rheology of the unstable layer underlying the stagnant upper part of the thermal boundary layer (TBL). Partial melting may change both properties. We analyze, using 2-D numerical simulations, how partial melting influences the dynamics of time-dependent SSC instabilities and the resulting thermo-mechanical rejuvenation of an oceanic plate moving atop of a plume. Our simulations show a complex behavior, with acceleration, no change, or delay of the SSC onset, due to competing effects of the latent heat of partial melting, which cools the plume material, and of the buoyancy increase associated with both melt retention and depletion of residue following melt extraction. The melt-induced viscosity reduction is too localized to affect significantly SSC dynamics. Faster SSC triggering is promoted for low melting degrees (low plume temperature anomalies, thick lithosphere, or fast moving plates), which limit both the temperature reduction due to latent heat of melting and the accumulation of depleted buoyant residue in the upper part of the unstable layer. In contrast, high partial melting degrees lead to a strong temperate decrease due to latent heat of melting and development of a thick depleted layer within the sublithospheric convecting layer, which delay the development of gravitational instabilities. Despite differences in SSC dynamics, the thinning of the lithosphere is not significantly enhanced relatively to simulations that neglect partial melting.
Abstract: The Harrat Kishb area of western Saudi Arabia is part of the Cenozoic volcanic fields in the western margin of the Arabian Shield. Numerous fresh ultramafic xenoliths are entrained in the basanite lava of Harrat Kishb, providing an opportunity to study the nature and petrogenetic processes involved in the evolution of the lithospheric mantle beneath the Arabian Shield. Based on the petrological characteristics and mineralogical compositions, the majority of the mantle xenoliths (~ 92%) are peridotites (lherzolites and pyroxene-bearing harzburgites); the remaining xenoliths (~ 8%) are unusual spinel-rich wehrlites containing black Al-spinel micropods. The two types of mantle xenoliths display magmatic protogranular texture. The peridotite xenoliths have high bulk-rock Mg#, high forsterite (Fo90-Fo92) and NiO (0.24-0.46 wt.%) contents of olivine, high clinopyroxene Mg# (0.91-0.93), variable spinel Cr# (0.10-0.49, atomic ratio), and approximately flat chondrite-normalized REE patterns. These features indicate that the peridotite xenoliths represent residues after variable degrees of melt extraction from fertile mantle. The estimated P (9-16 kbar) and T (877-1227 °C) as well as the oxidation state (?logfO2 = ? 3.38 to ? 0.22) under which these peridotite xenoliths originated are consistent with formation conditions similar to most sub-arc abyssal-type peridotites worldwide. The spinel-rich wehrlite xenoliths have an unusual amount (~ 30 vol.%) of Al-spinel as peculiar micropods with very minor Cr2O3 content (< 1 wt.%). Olivines of the spinel-rich wehrlites have low-average Fo (Fo81) and NiO (0.18 wt.%) contents, low-average cpx Mg# (0.79), high average cpx Al2O3 content (8.46 wt.%), and very low-average spinel Cr# (0.01). These features characterize early mantle cumulates from a picritic melt fraction produced by low degrees of partial melting of a garnet-bearing mantle source. The relatively high Na2O and Al2O3 contents of cpx suggest that the spinel-rich wehrlites are formed under high P (11-14 kbar), T (1090-1130 °C), and oxidation state (?logfO2 FMQ = + 0.14 to + 0.37), which occurred slightly below the crust-mantle boundary. The REE patterns of spinel-rich wehrlites are almost similar to those of the associated peridotite xenoliths, which confirm at least a spatial genetic linkage between them. Regarding the formation of Al-spinel micropods in spinel-rich wehrlite cumulates, it is suggested that the melt-rock reaction mechanism is not the only process by which podiform chromitite is formed. Early fractionation of picritic melts produced by partial melting of a mantle source under high P-T conditions could be another mechanism. The cpx composition, not opx, as it was assumed, seems to be the main control of the size and composition of spinel concentrations.
Nuclear Instruments and Methods in Physics Research Section A., A785, pp. 9-13.
Technology
Methodology
Abstract: A new technology for diamond detection in kimberlite based on the tagged neutron method is proposed. The results of experimental researches on irradiation of kimberlite samples with 14.1-MeV tagged neutrons are discussed. The source of the tagged neutron flux is a portable neutron generator with a built-in 64-pixel silicon alpha-detector with double-sided stripped readout. Characteristic gamma rays resulting from inelastic neutron scattering on nuclei of elements included in the composition of kimberlite are registered by six gamma-detectors based on BGO crystals. The criterion for diamond presence in kimberlite is an increased carbon concentration within a certain volume of the kimberlite sample.
Cold Regions Science and Technology, Vol. 123, pp. 140-148.
Russia
Geomorphology
Abstract: The paper presents unique results of studying the composition of the ground ice (major components, trace elements, and rare earth elements — REEs) encountered at a depth of 200-250 m in sedimentary and magmatic rocks in the Western Yakutia diamond-bearing regions. In addition to those established earlier, three new geochemical types of ground ice have been defined: (i) sulfate-hydrocarbonate, (ii) chloride-hydrocarbonate, and (iii) sulfate-chloride types with mixed cation composition. The ground ice geochemical features are caused by evolutionary processes of interaction in the water-rock system during permafrost formation. The enclosed rocks were the source for the addition of sulfate and chlorine ions, as well as trace elements, to the ground waters of the active water exchange zone that had existed before freezing. The distribution pattern of REEs in ground ice has a special form distinct from that of sedimentary rocks, kimberlites, and ocean waters, but similar to the REE pattern in local river waters. This REE pattern features the positive europium (Eu) anomaly and approximate equality of light and heavy REEs. The obtained results essentially expand the insight into ice-formation processes in sedimentary and magmatic rocks.
Cold Regions Science and Technology, Vol. 123, pp. 140-148.
Russia, Yakutia
Geomorphology
Abstract: The paper presents unique results of studying the composition of the ground ice (major components, trace elements, and rare earth elements - REEs) encountered at a depth of 200-250 m in sedimentary and magmatic rocks in the Western Yakutia diamond-bearing regions. In addition to those established earlier, three new geochemical types of ground ice have been defined: (i) sulfate-hydrocarbonate, (ii) chloride-hydrocarbonate, and (iii) sulfate-chloride types with mixed cation composition. The ground ice geochemical features are caused by evolutionary processes of interaction in the water-rock system during permafrost formation. The enclosed rocks were the source for the addition of sulfate and chlorine ions, as well as trace elements, to the ground waters of the active water exchange zone that had existed before freezing. The distribution pattern of REEs in ground ice has a special form distinct from that of sedimentary rocks, kimberlites, and ocean waters, but similar to the REE pattern in local river waters. This REE pattern features the positive europium (Eu) anomaly and approximate equality of light and heavy REEs. The obtained results essentially expand the insight into ice-formation processes in sedimentary and magmatic rocks.
Abstract: Rare earth mineralization in the Bear Lodge alkaline complex (BLAC) is mainly associated with an anastomosing network of carbonatite dikes and veins, and their oxidized equivalents. Bear Lodge carbonatites are LREE-dominant, with some peripheral zones enriched in HREEs. We describe the unique chemistry and mineralogy one such peripheral zone, the Cole HFSE(+HREE) Occurrence (CHO), located ~2 km from the main carbonatite intrusions. The CHO consists of anatase, xenotime-(Y), brockite, fluorite, zircon, and K-feldspar, and contains up to 44.88% TiO2, 3.12% Nb2O5, 6.52% Y2O3, 0.80% Dy2O3, 2.63% ThO2, 6.0% P2O5, and 3.73% F. Electron microprobe analyses of xenotime-(Y) overgrowths on zircon show that oscillatory zoning is a result of variable Th and Ca content. Cheralite-type substitution, whereby Th and Ca are incorporated at the expense of REEs, is predominant over the more commonly observed thorite-type substitution in xenotime-(Y). Th/Ca-rich domains are highly beam sensitive and accompanied by high-F concentrations and low-microprobe oxide totals, suggesting cheralite-type substitution is more easily accommodated in fluorinated and hydrated/hydroxylated xenotime-(Y). Analyses of xenotime-(Y) and brockite show evidence of Embedded Image substitution for Embedded Image with patches of an undefined Ca-Th-Y-Ln phosphovanadate solid-solution composition within brockite clusters. Fluorite from the CHO is HREE-enriched with an average Y/Ho ratio of 33.2, while other generations of fluorite throughout the BLAC are LREE-enriched with Y/Ho ratios of 58.6-102.5. HFSE(+HREE) mineralization occurs at the interface between alkaline silicate intrusions and the first outward occurrence of calcareous Paleozoic sedimentary rocks, which may be local sources of P, Ti, V, Zr, and Y. U-Pb zircon ages determined by LA-ICP-MS reveal two definitive 207Pb/206Pb populations at 2.60-2.75 and 1.83-1.88 Ga, consistent with derivation from adjacent sandstones and Archean granite. Therefore, Zr and Hf are concentrated by a physical process independent of the Ti/Nb-enriched fluid composition responsible for anatase crystallization. The CHO exemplifies the extreme fluid compositions possible after protracted LREE-rich crystal fractionation and subsequent fluid exsolution in carbonatite-fluid systems. We suggest that the anatase+xenotime-(Y)+brockite+fluorite assemblage precipitated from highly fractionated, low-temperature (<200 °C), F-rich fluids temporally related to carbonatite emplacement, but after significant fractionation of ancylite and Ca-REE fluorocarbonates. Low-temperature aqueous conditions are supported by the presence of fine-grained anatase as the sole Ti-oxide mineral, concentrically banded botryoidal fluorite textures, and presumed hydration of phosphate minerals. Fluid interaction with Ca-rich lithologies is known to initiate fluorite crystallization which may cause destabilization of (HREE,Ti,Nb)-fluoride complexes and precipitation of REE+Th phosphates and Nb-anatase, a model valuable to the exploration for economic concentrations of HREEs, Ti, and Nb.
Abstract: The Mesoproterozoic Pilanesberg Complex, South Africa, is built up by several distinct, ring-shaped intrusions of syenite and peralkaline nepheline syenite. A mildly peralkaline ((Na + K) / Al = 1.04–1.09), medium-to coarse grained nepheline syenite makes up the outermost ring in the southwestern part of the complex (“Matooster type white foyaite”). In this rock, mafic silicate minerals (amphibole, biotite, aegirine) and Ti-bearing minerals (ilmenite, astrophyllite, aenigmatite, lorenzenite, bafertisite, jinshajiangite) are interstitial to feldspar and nepheline, and define a series of mineral assemblages reflecting a change from a miaskitic crystallization regime (with Na-Ca amphibole, titanite and ilmenite) to increasingly agpaitic conditions (with arfvedsonite, aegirine, astrophyllite, aenigmatite, lorenzenite). The main driving force behind the evolution was an increase in peralkalinity of the trapped liquid, mainly by adcumulus growth of alkali feldspar and nepheline, which in the later stages of evolution was combined with increases in oxygen fugacity and water activity. Unlike in most other agpaitic rock complexes, Zr remained compatible in aegirine (and to some extent in amphibole) almost to the end of the process, when a hydrous zirconium silicate mineral (hilairite) crystallized as the only mineral in the rock having essential zirconium. The presence of minerals such as hilairite, bafertisite, jinshajiangite and a Na-REE-Sr rich apatite group mineral (fluorcaphite ?) in the latest assemblages suggests that the last remaining interstitial melt or fluid approached a hyperagpaitic composition. The isolated melt pockets in the Pilanesberg white foyaite follow a pattern of evolution that can be seen as a miniature analogue of the fractional crystallization processes controlling magma evolution in large, alkaline igneous rock complexes.-
Abstract: U-Pb and Lu-Hf data are routinely used to trace detrital zircon in clastic sediments to their original source in crystalline bedrock (the protosource), to map out paths of sediment transport, and characterize large-scale processes of crustal evolution. For such data to have a provenance significance, a simple transport route from the protosource in which the zircon formed to its final site of deposition is needed. However, detrital zircon data from Phanerozoic sedimentary cover sequences in South Africa suggest that this “source to sink” relationship has been obscured by repeated events of sedimentary recycling. Phanerozoic sandstones (Cape Supergroup, Karoo Supergroup, Natal Group, Msikaba Formation) and unconsolidated, Cenozoic sands in South Africa share major detrital zircon fractions of late Mesoproterozoic (940-1120 Ma, ?Hf ? 0 to + 15) and Neoproterozoic age (470-720 Ma, ?Hf ? ? 10 to + 8). A Permian age fraction (240-280 Ma, ?Hf ? ? 8 to + 5) is prominent in sandstones from the upper part of the Karoo Supergroup. All of these sequences are dominated by material derived by recycling of older sedimentary rocks, and only the youngest, late Palaeozoic fraction has a clear provenance significance (Gondwanide orogen). The virtual absence of Archaean zircon is a striking feature in nearly all suites of detrital zircon studied in the region. This indicates that significant events in the crustal evolution history of southern African and western Gondwana are not represented in the detrital zircon record. South Africa provides us with a record of recycling of cover sequences throughout the Phanerozoic, and probably back into the Neoproterozoic, in which the “sink” of one sedimentary cycle will act as the “source” in subsequent cycles. In such a setting, detrital zircon may give information on sedimentary processes rather than on provenance.
Geonomos *** IN POR, Vol. 19, 1, pp. 39-45. *** In Portuguese
South America, Brazil
Deposit - Coromandel area
Abstract: Hundreds of kimberlite intrusions and related rocks are known in the Coromandel region (MG), in the "Alto Paranaiba Diamondiferous Province", although the knowledge of these rocks is still scarce. Among these intrusions, it emphasizes the Grota do Cedro kimberlite, which outcrops in the drainage of same name at south of Coromandel (MG), hosted in micaschists of the Araxá Group (Neoproterozoic). The body has a roughly elliptical surface shape with 350 and 300 m axis; its chemical composition is similar to others of the province, and mineral chemistry of Cr-pyrope shows a strong concentration in the "G9" and "G5" fields. These chemical fields generally characterize diamond-poor or infertile intrusions.
Abstract: "Super-deep" diamonds are thought to crystallize between 300 and 800 km depth because some of the inclusions trapped within them are considered to be the products of retrograde transformation from lower mantle or transition zone precursors. In particular, single inclusion CaSiO3-walstromite is believed to derive from CaSiO3-perovskite, although its real depth of origin has never been proven. Our aim is therefore to determine for the first time the pressure of formation of the diamond-CaSiO3-walstromite pair by “single-inclusion elastic barometry” and to determine whether CaSiO3-walstromite derives from CaSiO3-perovskite or not. We investigated several single phases and assemblages of Ca-silicate inclusions still trapped in a diamond coming from Juina (Brazil) by in-situ analyses (single-crystal X-ray diffraction and micro-Raman spectroscopy) and we obtained a minimum entrapment pressure of ~ 5.7 GPa (? 180 km) at 1500 K. However, the observed coexistence of CaSiO3-walstromite, larnite (?-Ca2SiO4) and CaSi2O5-titanite in one multiphase inclusion within the same diamond indicates that the sample investigated is sub-lithospheric with entrapment pressure between ~ 9.5 and ~ 11.5 GPa at 1500 K, based on experimentally-determined phase equilibria. In addition, thermodynamic calculations suggested that, within a diamond, single inclusions of CaSiO3-walstromite cannot derive from CaSiO3-perovskite, unless the diamond around the inclusion expands by ~ 30% in volume.
Abstract: Chromitites (aggregates of chromite or chromian spinel) inform us of various mantle processes, including magmatism, magma/peridotite reaction and mantle dynamics [1]. They typically form as magmatic cumulates from chromiteoversaturated melt within conduits in the mantle peridotite [2]. They are usually enveloped by replacive dunite [1]. In Oman, both concordant and discordant chromitites are of low-P (upper mantle) magmatic origin [3, 4]. Their chromite grains contain inclusions of pargasite, aspidolite and pyroxenes, which suggest low P. Mineral chemistry suggests involvement of MORB for the concordant chromitite, and of arc-related magma for the discrodant one. This is consistent with the switch of tectonic setting, from MOR to SSZ, for the Oman ophiolite magmatism. Only the concordant chromitite shows metamorphic characters, i.e. exsolution of diopside in chromite and outward diffusion of Ni (< 30 cm) in the dunite envelope [5], indicating its longer residence in the mantle. Ultra-high pressure (UHP) chromitites have been reported from the Tibetan and Polar Ural ophiolites [6, 7]. Most of their petrographic characteristics can be explained by UHP "metamorphism" of low-P magmatic chromitites above [8]. This may suggest recycling of low-P chromitite as deep as the transion-zone mantle [9]. The UHP chromitite is, however, still highly enigmatic: some characteristics, e.g., the amount and origin of carbon as diamond, are difficult to explain. High-T aqueous fluids containing Cl, S and C, can mobilize Cr and precipitate chromite in the mantle [10]. Chromite was dissolved and precipitated in/from high-T fluids which formed diopsidites in Oman. Chromite was concentrated to form thin "hydrothermal chromitite". Sub-arc metasomatized peridotites contain secondary chromite closely associated with fluid inclusions, indicating Cr mobility via fluids within the mantle wedge. Hydrothermal chromitites are expected in the mantle where fluid circulation is available.
Aravanis, T., Chen, J., Fuechsle, M., Grujic, M., Johnston, P., Kok, Y., Magaraggia, R., Mann, A., Mann, L., McIntoshm S., Rheinberger, G., Saxey, D., Smalley, M., van Kann, F., Walker, G., Winterflood, J.
Abstract: The minerals exploration industry’s demand for a highly precise airborne gravity gradiometer has driven development of the VK1TM Airborne Gravity Gradiometer, a collaborative effort by Rio Tinto and the University of Western Australia. VK1TM aims to provide gravity gradient data with lower uncertainty and higher spatial resolution than current commercial systems. In the recent years of VK1TM development, there have been significant improvements in hardware, signal processing and data processing which have combined to result in a complete AGG system that is approaching competitive survey-ready status. This paper focuses on recent improvements. Milestone-achieving data from recent lab-based and moving-platform trials will be presented and discussed, along with details of some advanced data processing techniques that are required to make the most use of the data.
Abstract: This study gives an analysis of the effect of high temperature annealing on the infrared and photoluminescence (PL) features as well as the inclusions of two hydrogen-rich diamond plates from Zimbabwe that were cut from the same rough. The samples showed strong inclusion-related zoning known as hydrogen clouds which consist of micron-sized particles of as yet undetermined structure. This allowed hydrogen-rich and hydrogen-poor areas to be compared throughout the annealing study. The diamond plates were annealed to temperatures of 300oC, 600oC, 800oC, 1000oC, 1400oC, and 1700oC. The infrared and PL, and Raman maps were collected after every temperature step to study the effects of heat on the defects, and photomicrographs were collected to study the inclusions. Several photoluminescence features were seen to decrease in size including the 637 nm peak, which is the negatively charged nitrogen-vacancy center [NV-] and the 503.2 nm peak, known as the H3 and consists of two nitrogen atoms and vacancy in the neutral charge state and normally has a high thermal stability. The H2 defect at 986.2 nm, which is the negative form of the H3, was shown to increase after annealing. The hydrogen clouds underwent dramatic changes in apparent color and particle size, going from a light translucent gray appearance to an opaque black. The particle size grew from less than one micron to an average of fourteen microns, and the hexagonal outline of the particles became noticeable. Spatial raman spectroscopy was used to show that the color change and size change were due to graphitization of the included particles.
Abstract: This study gives an analysis of the effect of high temperature annealing on the infrared and photoluminescence (PL) features as well as the inclusions of two hydrogen-rich diamond plates from Zimbabwe that were cut from the same rough. The samples showed strong inclusion-related zoning known as hydrogen clouds which consist of micron-sized particles of as yet undetermined structure. This allowed hydrogen-rich and hydrogen-poor areas to be compared throughout the annealing study. The diamond plates were annealed to temperatures of 300oC, 600oC, 800oC, 1000oC, 1400oC, and 1700oC. The infrared and PL, and Raman maps were collected after every temperature step to study the effects of heat on the defects, and photomicrographs were collected to study the inclusions. Several photoluminescence features were seen to decrease in size including the 637 nm peak, which is the negatively charged nitrogen-vacancy center [NV-] and the 503.2 nm peak, known as the H3 and consists of two nitrogen atoms and vacancy in the neutral charge state and normally has a high thermal stability. The H2 defect at 986.2 nm, which is the negative form of the H3, was shown to increase after annealing. The hydrogen clouds underwent dramatic changes in apparent color and particle size, going from a light translucent gray appearance to an opaque black. The particle size grew from less than one micron to an average of fourteen microns, and the hexagonal outline of the particles became noticeable. Spatial raman spectroscopy was used to show that the color change and size change were due to graphitization of the included particles.
Abstract: Convergent margins, being the boundaries between colliding lithospheric plates, form the most disastrous areas in the world due to intensive, strong seismicity and volcanism. We review global geophysical data in order to illustrate the effects of the plate tectonic processes at convergent margins on the crustal and upper mantle structure, seismicity, and geometry of subducting slab. We present global maps of free-air and Bouguer gravity anomalies, heat flow, seismicity, seismic Vs anomalies in the upper mantle, and plate convergence rate, as well as 20 profiles across different convergent margins. A global analysis of these data for three types of convergent margins, formed by ocean-ocean, ocean-continent, and continent-continent collisions, allows us to recognize the following patterns. (1) Plate convergence rate depends on the type of convergent margins and it is significantly larger when, at least, one of the plates is oceanic. However, the oldest oceanic plate in the Pacific ocean has the smallest convergence rate. (2) The presence of an oceanic plate is, in general, required for generation of high-magnitude (M > 8.0) earthquakes and for generating intermediate and deep seismicity along the convergent margins. When oceanic slabs subduct beneath a continent, a gap in the seismogenic zone exists at depths between ca. 250 km and 500 km. Given that the seismogenic zone terminates at ca. 200 km depth in case of continent-continent collision, we propose oceanic origin of subducting slabs beneath the Zagros, the Pamir, and the Vrancea zone. (3) Dip angle of the subducting slab in continent-ocean collision does not correlate neither with the age of subducting oceanic slab, nor with the convergence rate. For ocean-ocean subduction, clear trends are recognized: steeply dipping slabs are characteristic of young subducting plates and of oceanic plates with high convergence rate, with slab rotation towards a near-vertical dip angle at depths below ca. 500 km at very high convergence rate. (4) Local isostasy is not satisfied at the convergent margins as evidenced by strong free air gravity anomalies of positive and negative signs. However, near-isostatic equilibrium may exist in broad zones of distributed deformation such as Tibet. (5) No systematic patterns are recognized in heat flow data due to strong heterogeneity of measured values which are strongly affected by hydrothermal circulation, magmatic activity, crustal faulting, horizontal heat transfer, and also due to low number of heat flow measurements across many margins. (6) Low upper mantle Vs seismic velocities beneath the convergent margins are restricted to the upper 150 km and may be related to mantle wedge melting which is confined to shallow mantle levels.
Abstract: The origin of high topography in southern Africa is enigmatic. By comparing topography in different cratons, we demonstrate that in southern Africa both the Archean and Proterozoic blocks have surface elevation 500-700 m higher than in any other craton worldwide, except for the Tanzanian Craton. An unusually high topography may be caused by a low density (high depletion) of the cratonic lithospheric mantle and/or by the dynamic support of the mantle with origin below the depth of isostatic compensation (assumed here to be at the lithosphere base). We use free-board constraints to examine the relative contributions of the both factors to surface topography in the cratons of southern Africa. Our analysis takes advantage of the SASE seismic experiment which provided high resolution regional models of the crustal thickness. We calculate the model of density structure of the lithospheric mantle in southern Africa and show that it has an overall agreement with xenolith-based data for lithospheric terranes of different ages. Density of lithospheric mantle has significant short-wavelength variations in all tectonic blocks of southern Africa and has typical SPT values of ca. 3.37-3.41 g/cm3 in the Cape Fold and Namaqua-Natal fold belts, ca. 3.34-3.35 g/cm3 in the Proterozoic Okwa block and the Bushveld Intrusion Complex, ca. 3.34-3.37 g/cm3 in the Limpopo Belt, and ca. 3.32-3.33 g/cm3 in the Kaapvaal and southern Zimbabwe cratons.The results indicate that 0.5-1.0 km of surface topography, with the most likely value of ca. 0.5 km, cannot be explained by the lithosphere structure within the petrologically permitted range of mantle densities and requires the dynamic (or static) contribution from the sublithospheric mantle. Given a low amplitude of regional free air gravity anomalies (ca. + 20 mGal on average), we propose that mantle residual (dynamic) topography may be associated with the low-density region below the depth of isostatic compensation. A possible candidate is the low velocity layer between the lithospheric base and the mantle transition zone, where a temperature anomaly of 100-200 °C in a ca. 100-150 km thick layer may explain the observed reduction in Vs velocity and may produce ca. 0.5-1.0 km to the regional topographic uplift.
Abstract: We present a new regional model for the depth-averaged density structure of the cratonic lithospheric mantle in southern Africa constrained on a 30? × 30? grid and discuss it in relation to regional seismic models for the crust and upper mantle, geochemical data on kimberlite-hosted mantle xenoliths, and data on kimberlite ages and distribution. Our calculations of mantle density are based on free-board constraints, account for mantle contribution to surface topography of ca. 0.5-1.0 km, and have uncertainty ranging from ca. 0.01 g/cm3 for the Archean terrains to ca. 0.03 g/cm3 for the adjacent fold belts. We demonstrate that in southern Africa, the lithospheric mantle has a general trend in mantle density increase from Archean to younger lithospheric terranes. Density of the Kaapvaal mantle is typically cratonic, with a subtle difference between the eastern, more depleted, (3.31-3.33 g/cm3) and the western (3.32-3.34 g/cm3) blocks. The Witwatersrand basin and the Bushveld Intrusion Complex appear as distinct blocks with an increased mantle density (3.34-3.35 g/cm3) with values typical of Proterozoic rather than Archean mantle. We attribute a significantly increased mantle density in these tectonic units and beneath the Archean Limpopo belt (3.34-3.37 g/cm3) to melt-metasomatism with an addition of a basaltic component. The Proterozoic Kheis, Okwa, and Namaqua-Natal belts and the Western Cape Fold Belt with the late Proterozoic basement have an overall fertile mantle (ca. 3.37 g/cm3) with local (100-300 km across) low-density (down to 3.34 g/cm3) and high-density (up to 3.41 g/cm3) anomalies. High (3.40-3.42 g/cm3) mantle densities beneath the Eastern Cape Fold belt require the presence of a significant amount of eclogite in the mantle, such as associated with subducted oceanic slabs. We find a strong correlation between the calculated density of the lithospheric mantle, the crustal structure, the spatial pattern of kimberlites, and their emplacement ages. (1) Blocks with the lowest values of mantle density (ca. 3.30 g/cm3) are not sampled by kimberlites and may represent the "pristine" Archean mantle. (2) Young (< 90 Ma) Group I kimberlites sample mantle with higher density (3.35 ± 0.03 g/cm3) than the older Group II kimberlites (3.33 ± 0.01 g/cm3), but the results may be biased by incomplete information on kimberlite ages. (3) Diamondiferous kimberlites are characteristic of regions with a low-density cratonic mantle (3.32-3.35 g/cm3), while non-diamondiferous kimberlites sample mantle with a broad range of density values. (4) Kimberlite-rich regions have a strong seismic velocity contrast at the Moho, thin crust (35-40 km) and low-density (3.32-3.33 g/cm3) mantle, while kimberlite-poor regions have a transitional Moho, thick crust (40-50 km), and denser mantle (3.34-3.36 g/cm3). We explain this pattern by a lithosphere-scale (presumably, pre-kimberlite) magmatic event in kimberlite-poor regions, which affected the Moho sharpness and the crustal thickness through magmatic underplating and modified the composition and rheology of the lithospheric mantle to make it unfavorable for consequent kimberlite eruptions. (5) Density anomalies in the lithospheric mantle show inverse correlation with seismic Vp, Vs velocities at 100-150 km depth. However, this correlation is weaker than reported in experimental studies and indicates that density-velocity relationship in the cratonic mantle is strongly non-unique.
Abstract: Mineral data from Yakutian kimberlites allow reconstruction of the history of lithospheric mantle. Differences occur in compositions of mantle pyropes and clinopyroxenes from large kimberlite pipes in the Alakit and Daldyn fields. In the Alakit field, Cr-diopsides are alkaline, and Stykanskaya and some other pipes contain more sub-calcic pyropes and dunitic-type diamond inclusions, while in the Daldyn field harzburgitic pyropes are frequent. The eclogitic diamond inclusions in the Alakit field are sharply divided in types and conditions, while in the Daldyn field they show varying compositions and often continuous Pressure-Temperature (P-T) ranges with increasing Fe# with decreasing pressures. In Alakit, Cr-pargasites to richterites were found in all pipes, while in Daldyn, pargasites are rare Dalnyaya and Zarnitsa pipes. Cr-diopsides from the Alakit region show higher levels of light Rare Earth Elements (LREE) and stronger REE-slopes, and enrichment in light Rare Earth Elements (LREE), sometimes Th-U, and small troughs in Nb-Ta-Zr. In the Daldyn field, the High Field Strength Elements HFSE troughs are more common in clinopyroxenes with low REE abundances, while those from sheared and refertilized peridotites have smooth patterns. Garnets from Alakit show HREE minima, but those from Daldyn often have a trough at Y and high U and Pb. PTXfO2 diagrams from both regions show similarities, suggesting similar layering and structures. The degree of metasomatism is often higher for pipes which show dispersion in P-Fe# trends for garnets. In the mantle beneath Udachnaya and Aykhal, pipes show 6-7 linear arrays of P-Fe# in the lower part of the mantle section at 7.5-3.0 GPa, probably reflecting primary subduction horizons. Beneath the Sytykanskaya pipe, there are several horizons with opposite inclinations which reflect metasomatic processes. The high dispersion of the P-Fe# trend indicating widespread metasomatism is associated with decreased diamond grades. Possible explanation of the differences in mineralogy and geochemistry of the mantle sections may relate to their tectonic positions during growth of the lithospheric keel. Enrichment in volatiles and alkalis possibly corresponds to interaction with subduction-related fluids and melts in the craton margins. Incorporation of island arc peridotites from an eroded arc is a possible scenario.
Abstract: New versions of the universal Jd-Di exchange clinopyroxene barometer for peridotites, pyroxenites and eclogites, and also garnet barometer for eclogites and peridotites were developed. They were checked using large experimental data sets for eclogitic (?530) and peridotitic systems (>650). The precision of the universal Cpx barometer for peridotites based on Jd-Di exchange is close to Cr-Tschermakite method produced by Nimis and Taylor (2000). Cpx barometer was transformed by the substitution of major multiplier for KD by the equations dependent from Al-Na-Fe. Obtained equation in combination with the thermometer of Nimis and Taylor (2000) allow to reconstruct position of the magma feeder systems of the alkali basaltic magma within the mantle diapirs in modern platforms like in Vitim plateau and other Southern Siberia localities and several localities worldwide showing good agreement of pressure ranges for black and green suites. These equations allow construct PTX diagrams for the kimberlite localities in Siberia and worldwide calculating simultaneously the PT parameters for different groups of mantle rocks. They give very good results for the concentrates from kimberlite lamproites and placers with mantle minerals. They are useful for PT estimates for diamond inclusions. The positions of eclogite groups in mantle sections are similar to those determined with new Gar-Cpx barometer produced by C. Beyer et al. (2015). The Fe rich eclogites commonly trace the boundary between the lower upper parts of subcontinental lithospheric mantle (SCLM) at 3-4 GPa marking pyroxenite eclogites layer. Ca-rich eclogites and especially grospydites in SCLM beneath Precambrian kimberlites occurs near pyroxenite layer but in younger mantle sections they became common in the lower parts. The diamondiferous Mg Cr-less group eclogites referring to the ancient island arc complexes are also common in the middle part of mantle sections and near 5-6 GPa. Commonly eclogites in lower apart of mantle sections are remelted and trace the high temperature convective branch. The Mg- and Fe-rich pyroxenites also show the extending in pressure trends which suggest the anatexic melting under the influence of volatiles or under the interaction with plums.
Abstract: The Dalnyaya kimberlite pipe (Yakutia, Russia) contains mantle peridotite xenoliths (mostly lherzolites and harzburgites) that show both sheared porphyroclastic (deformed) and coarse granular textures, together with ilmenite and clinopyroxene megacrysts. Deformed peridotites contain high-temperature Fe-rich clinopyroxenes, sometimes associated with picroilmenites, which are products of interaction of the lithospheric mantle with protokimberlite related melts. The orthopyroxene-derived geotherm for the lithospheric mantle beneath Dalnyaya is stepped similar to that beneath the Udachnaya pipe. Coarse granular xenoliths fall on a geotherm of 35 mWm?2 whereas deformed varieties yield a 45 mWm?2 geotherm in the 2-7.5 GPa pressure interval. The chemistry of the constituent minerals including garnet, olivine and clinopyroxene shows trends of increasing Fe# (=Fe/(Fe + Mg)) with decreasing pressure. This may suggest that the interaction with fractionating protokimberlite melts occurred at different levels. Two major mantle lithologies are distinguished by the trace element patterns of their constituent minerals, determined by LA-ICP-MS. Orthopyroxenes, some clinopyroxenes and rare garnets are depleted in Ba, Sr, HFSE and MREE and represent relic lithospheric mantle. Re-fertilized garnet and clinopyroxene are more enriched. The distribution of trace elements between garnet and clinopyroxene shows that the garnets dissolved primary orthopyroxene and clinopyroxene. Later high temperature clinopyroxenes related to the protokimberlite melts partially dissolved these garnets. Olivines show decreases in Ni and increases in Al, Ca and Ti from Mg-rich varieties to the more Fe-rich, deformed and refertilized ones. Minerals showing higher Fe# (0.11-0.15) are found within intergrowths of low-Cr ilmenite-clinopyroxene-garnet related to the crystallization of protokimberlite melts in feeder channels. In P-f(O2) diagrams, garnets and Cr-rich clinopyroxenes indicate reduced conditions at the base of the lithosphere at ?5 log units below a FMQ buffer. However, Cr-poor clinopyroxenes, together with ilmenite and some Fe-Ca-rich garnets, demonstrate a more oxidized trend in the lower part of lithosphere at ?2 to 0 log units relative to FMQ. Clinopyroxenes from xenoliths in most cases show conditions transitional between those determined for garnets and megacrystalline Cr-poor suite. The relatively low diamond grade of Dalnyaya kimberlites is explained by a high degree of interaction with the oxidized protokimberlite melts, which is greater at the base of the lithosphere.
Abstract: Chemical reduction-oxidation mechanisms within mantle rocks link to the terrestrial carbon cycle by influencing the depth at which magmas can form, their composition, and ultimately the chemistry of gases released into the atmosphere. The oxidation state of the uppermost mantle has been widely accepted to be unchanged over the past 3800 m.y., based on the abundance of redox-sensitive elements in greenstone belt-associated samples of different ages. However, the redox signal in those rocks may have been obscured by their complex origins and emplacement on continental margins. In contrast, the source and processes occurring during decompression melting at spreading ridges are relatively well constrained. We retrieve primary redox conditions from metamorphosed mid-oceanic ridge basalts (MORBs) and picrites of various ages (ca. 3000-550 Ma), using V/Sc as a broad redox proxy. Average V/Sc values for Proterozoic suites (7.0 ± 1.4, 2?, n = 6) are similar to those of modern MORB (6.8 ± 1.6), whereas Archean suites have lower V/Sc (5.2 ± 0.4, n = 5). The lower Archean V/Sc is interpreted to reflect both deeper melt extraction from the uppermost mantle, which becomes more reduced with depth, and an intrinsically lower redox state. The pressure-corrected oxygen fugacity (expressed relative to the fayalite-magnetite-quartz buffer, ?FMQ, at 1 GPa) of Archean sample suites (?FMQ -1.19 ± 0.33, 2?) is significantly lower than that of post-Archean sample suites, including MORB (?FMQ -0.26 ± 0.44). Our results imply that the reducing Archean atmosphere was in equilibrium with Earth's mantle, and further suggest that magmatic gases crossed the threshold that allowed a build-up in atmospheric O2 levels ca. 3000 Ma, accompanied by the first "whiffs" of oxygen in sediments of that age.
Abstract: Hf-isotope data of greater than 1100 detrital zircon grains from the Palaeozoic, south-central Andean Gondwana margin record the complete crustal evolution of South America, which was the predominant source. The oldest grains, with crustal residence ages of 3.8-4.0 Ga, are consistent with complete recycling of existing continental crust around 4 Ga. We confirm three major Archaean, Palaeoproterozoic (Transamazonian) and late Mesoproterozoic to early Neoproterozoic crust-addition phases as well as six igneous phases during Proterozoic to Palaeozoic time involving mixing of juvenile and crustally reworked material. A late Mesoproterozoic to early Neoproterozoic, Grenville-age igneous belt can be postulated along the palaeo-margin of South America. This belt was the basement for later magmatic arcs and accreted allochthonous microcontinents as recorded by similar crustal residence ages. Crustal reworking likely dominated over juvenile addition during the Palaeozoic era, and Proterozoic and Archaean zircons were mainly crustally reworked from the eroding, thickened Ordovician Famatinian arc.
Abstract: Hf-isotope data of >1100 detrital zircon grains from the Palaeozoic, south-central Andean Gondwana margin record the complete crustal evolution of South America, which was the predominant source. The oldest grains, with crustal residence ages of 3.8-4.0 Ga, are consistent with complete recycling of existing continental crust around 4 Ga. We confirm three major Archaean, Palaeoproterozoic (Transamazonian) and late Mesoproterozoic to early Neoproterozoic crust-addition phases as well as six igneous phases during Proterozoic to Palaeozoic time involving mixing of juvenile and crustally reworked material. A late Mesoproterozoic to early Neoproterozoic, Grenville-age igneous belt can be postulated along the palaeo-margin of South America. This belt was the basement for later magmatic arcs and accreted allochthonous microcontinents as recorded by similar crustal residence ages. Crustal reworking likely dominated over juvenile addition during the Palaeozoic era, and Proterozoic and Archaean zircon was mainly crustally reworked from the eroding, thickened Ordovician Famatinian arc.
Geochimica et Cosmochimica Acta, Vol. 179, pp. 156-176.
Africa, South Africa
Deposit - Lace
Abstract: Diamond- and kyanite-bearing eclogites from the Lace kimberlite on the Kaapvaal craton have common picritic to gabbroic oceanic protoliths with bimineralic eclogites, lying on arrays of Eu? and ?REE that are consistent with accumulation and fractionation of plagioclase and olivine. However, they also show significant compositional differences, such as more grossular-rich garnet and aluminous clinopyroxene (cpx), which require the operation of additional processes. Their nature is elucidated using mineral major- and trace-element compositions, as well as Sr isotope ratios determined by in situ techniques.Highly variable major-element compositions across the co-genetic eclogite suites exert a strong effect on the trace-element distribution between garnet and cpx, whereby Sc, Ge, Sr, Y, Cd, REE, Th and U partition more strongly into garnet with increasing grossular-content. Thus, significant differences between the trace-element compositions of garnet can ensue from crystal-chemical effects alone, making their use as petrogenetic indicators potentially ambiguous. After correcting for these compositional effects, garnet in kyanite-/diamond eclogites, and in eclogites devoid of accessory minerals but with similar signatures, shows depletion (or dilution) in Sc, Ge, Y, In, Zr, Hf and the HREE, and enrichment in the LREE and Th compared to garnet in bimineralic eclogites. This is interpreted as the signature of a pelite-derived melt, which was transferred by addition of aluminous cpx that later exsolved kyanite and garnet, as observed in other aluminous eclogite suites. Continental input can explain initial (at 2.9 Ga) 87Sr/86Sr ? 0.714 measured in cpx in eleven samples with low 87Rb/86Sr (<0.01). The association of diamond with kyanite suggests that diamond formation is also linked to this event, possibly due to diamond formation by oxidation of reduced carbon, such as methane, and attendant reduction of Fe3+ in garnet. This model of sediment melt-oceanic crust interaction reconciles evidence for both low- and high-pressure igneous processes in some aluminous eclogites. We suggest that a subduction mélange is a favourable setting for the transfer of a sediment-derived signature into oceanic crust, leading to formation of diamondiferous kyanite-eclogites from bimineralic eclogites. Diapirism, fluxed by the presence of partial melt, may have facilitated dispersal of the eclogites in the lithosphere column, consistent with their widely varying equilibration pressures ranging from ?5 to 8 GPa.
Abstract: There is a growing body of evidence for the origin of cratonic mantle eclogite xenoliths by low-pressure formation in now-recycled ocean floors. Because they have protoliths ultimately derived from the convecting mantle, their study can potentially yield unprecedented insights into as yet little-understood palaeo-geodynamic regimes, once primary (fractional crystallisation, accumulation, mixing) and secondary processes (kimberlite infiltration, metasomatism) affecting their compositions are understood. This is achieved using diagnostic concentrations or ratios of the analytically and geologically most robust elements (major and minor elements, transition metals, REE), and aided by comparison to natural and modelled analogues. Here, mineral compositions taken from the literature were used to reconstruct bulk rocks and assign the samples to eclogites (further divided into high-Mg, low-Mg and high-Ca types), pyroxenites and their gabbroic (Eu* > 1.05) counterparts. Various protolith types - formed predominantly by < 1 GPa crystallisation from broadly picritic magmas leaving garnet-poor mantle sources - are identified: (1) Many high-Mg eclogites lie on modelled crystallisation trends between 0.5 and < 1 GPa. Some have elevated FeO contents with lower SiO2 and CaO possibly requiring Fe-rich pyroxenite heterogeneities in their mantle source. (2) Many high-Ca eclogites may be the differentiated (higher Na2O, TiO2 and FeO at lower MgO) equivalents of high-Mg eclogites, following modelled crystallisation trends at somewhat lower pressure (0.05 to 0.5 GPa). Other high-Ca eclogites with low FeO were produced during interaction with fluids and melts in mélange-type settings. (3) Low-Mg eclogites, with intermediate MgO content, are too FeO-rich to be intermediary crystallisation products of the same parental melt and are ascribed to melting out of Fe-rich lithologies possibly related to recycling of eclogite and/or contamination with ferromanganese sediments. (4) The positive Eu anomalies in gabbroic eclogites require accumulation of substantial amounts of plagioclase, consistent with their low FeO and TiO2 contents, but their simultaneously low MgO contents suggest that they interacted with residual melts. (5) The elevated CaO and low Al2O3 in pyroxenite may indicate clinopyroxene-rich high- or low-pressure cumulate protoliths, but high Cr2O3 and MgO, combined with low HREE and high LREE in many of these samples, suggests formation by hybridisation of eclogite-derived melt with peridotite.
Abstract: Geophysically detectible mid-lithospheric discontinuities (MLD) and lithosphere-asthenosphere boundaries (LAB) beneath cratons have received much attention over recent years, but a consensus on their origin has not yet emerged. Cratonic lithosphere composition and origin is peculiar due to its ultra-depletion during plume or accretionary tectonics, cool present-day geothermal gradients, compositional and rheological stratification and multiple metasomatic overprints. Bearing this in mind, we integrate current knowledge on the physical properties, chemical composition, mineralogy and fabric of cratonic mantle with experimental and thermodynamic constraints on the formation and migration of melts, both below and within cratonic lithosphere, in order to find petrologically viable explanations for cratonic mantle discontinuities. LABs characterised by strong seismic velocity gradients and increased conductivity require the presence of melts, which can form beneath intact cratonic roots reaching to ~ 200-250 km depth only in exceptionally warm and/or volatile-rich mantle, thus explaining the paucity of seismical LAB observations beneath cratons. When present, pervasive interaction of these - typically carbonated - melts with the deep lithosphere leads to densification and thermochemical erosion, which generates topography at the LAB and results in intermittent seismic LAB signals or conflicting seismic, petrologic and thermal LAB depths. In rare cases (e.g. Tanzanian craton), the tops of live melt percolation fronts may appear as MLDs and, after complete lithosphere rejuvenation, may be sites of future, shallower LABs (e.g. North China craton). Since intact cratons are presently tectonomagmatically quiescent, and since MLDs produce both positive and negative velocity gradients, in some cases with anisotropy, most MLDs may be best explained by accumulations (metasomes) of seismically slow minerals (pyroxenes, phlogopite, amphibole, carbonates) deposited during past magmatic-metasomatic activity, or fabric inherited from cratonisation. They may accumulate as layers at, or as subvertical veins above, the depth at which melt flow transitions from pervasive to focussed flow at the mechanical boundary layer, causing azimuthal and radial anisotropy. Thermodynamic calculations investigating the depth range in which small-volume melts can be produced relative to the field of phlogopite stability and the presence of MLDs show that phlogopite precipitates at various pressures as a function of age-dependent thermal state of the cratonic mantle, thus explaining variable MLD depths. Even if not directly observed, such metasomes have been shown to be important ingredients in small-volume volatile-rich melts typically penetrating cratonic lithospheres. The apparent sparseness of evidence for phlogopite-rich assemblages in the mantle xenolith record at geophysically imaged MLD depths, if not due to preferential disaggregation in the kimberlite or alteration, may relate to vagaries of both kimberlite and human sampling.
Reviews in Mineralogy and Geochemistry, Vol. 81, pp. 239-304.
Mantle
Mineralogy
Abstract: Cratonic lithospheric mantle is composed of predominantly refractory materials that formed at higher mantle potential temperatures (TP) than recorded in non-cratonic peridotites. It also shows stronger depletion and fractionation of Pd and Pt from Ru, Os and Ir than oceanic, supra-subduction zone or off-cratonic lithospheric mantle, as well as some of the lowest Se and Te contents. The varied response of the highly siderophile elements (HSE: Os, Ir, Ru, Rh, Pt, Pd, Re, Au), and their embedded radioactive decay systems, to changes in oxygen fugacity (fO2), sulfur fugacity (fS2) and pressure (P)-in particular through the impact of these parameters on the stability of the main HSE-bearing sulfide and alloy phases makes them potentially powerful tracers of their melting environment. Therefore, investigation of the HSE systematics of cratonic mantle peridotites, in combination with information from Re–Os isotopes on time-integrated enrichment or depletion, can help us to understand processes leading to mantle differentiation and continental lithosphere formation in the Archean, which are controversial subjects despite decades of research. The longevity of the cratonic lithosphere implies that there was ample opportunity for secondary overprint, obscuring our view of earlier processes. For example, destabilization of platinum-group element (PGE: Os, Ir, Ru, Rh, Pt, Pd) alloy leading to depletions in the compatible PGE, and perhaps Pt, in some cratonic mantle samples may occur in an oxidizing mantle wedge or through interaction with oxidizing small-volume, volatile-rich melts that typically invade cratonic roots. Such melts may eventually deposit S, Pd, Pt and Re and also capture remaining PGE alloys, consistent with the anomalous S-rich character of many kimberlite-borne xenoliths. Their basalt-borne counterparts show additional late effects of subaerial degassing that can deplete volatile elements (S, Re, Os). Basaltic melts can also scavenge PGE alloys at depth, while still sulfide-undersaturated. Such melts, may, on ascent, add sulfides when they become sulfur-saturated and, during the process, refertilize the mantle and modify major-element and modal compositions. The investigation of minor lithologies in the cratonic lithosphere, such as eclogites and pyroxenites, which are expressions of tectonothermal events ranging from subduction to melt infiltration, can enhance our understanding of the effects of these processes on HSE redistribution. Thus, three major topics will be discussed, using HSE systematics in cratonic mantle samples: (1) How did the HSE behave during the (in part) extreme degrees of partial melt extraction experienced by cratonic lithospheric mantle; (2) What were the effects of the secular metasomatic overprint of the cratonic mantle; (3) What was the composition of the Archean convecting mantle, for which cratonic mantle samples may afford better insight than modern samples, provided, of course, that we have an accurate grasp of how HSE are redistributed during partial melting and metasomatism. Models based on experiments done under controlled pressure (P), temperature (T), fO2 and fS2 conditions can help place the data in context and to distinguish between melt- and metasomatism-related processes. Disentangling the various primary and secondary effects is only possible when HSE are studied in combination with lithophile elements, with due attention to petrography and mineralogy. This adds many layers of complexity, but ultimately allows a more complete understanding of the variegated processes that have shaped the cratonic lithosphere through time. In this review, we commence by discussing the peculiarities and complexities of continental lithospheric mantle origin, evolution and current state. We then introduce the database used in this contribution, followed by a brief review of the mineral hosts of HSE in peridotite and of the diverse approaches to isolate the HSE for measurement. We examine the behavior of the HSE during the formation of cratonic lithospheric mantle under non-uniformitarian conditions, where the application of the Re–Os isotope system has afforded particularly useful information on the timing of initial melt depletion and the stabilization of cratonic roots. We then turn to the effects of mantle metasomatism, both during intra-plate and craton-margin processes (see also Gannoun et al. 2016, this volume), on HSE systematics in cratonic mantle. We also discuss the data in the context of melt extraction modelling that shed light on the primary versus secondary HSE signatures in cratonic mantle rocks. Finally, we evaluate the possibility that the HSE in cratonic mantle retain a memory of core formation and subsequent accretionary processes.
Abstract: Chemical reduction-oxidation mechanisms within mantle rocks link to the terrestrial carbon cycle by influencing the depth at which magmas can form, their composition, and ultimately the chemistry of gases released into the atmosphere. The oxidation state of the uppermost mantle has been widely accepted to be unchanged over the past 3800 m.y., based on the abundance of redox-sensitive elements in greenstone belt-associated samples of different ages. However, the redox signal in those rocks may have been obscured by their complex origins and emplacement on continental margins. In contrast, the source and processes occurring during decompression melting at spreading ridges are relatively well constrained. We retrieve primary redox conditions from metamorphosed mid-oceanic ridge basalts (MORBs) and picrites of various ages (ca. 3000-550 Ma), using V/Sc as a broad redox proxy. Average V/Sc values for Proterozoic suites (7.0 ± 1.4, 2?, n = 6) are similar to those of modern MORB (6.8 ± 1.6), whereas Archean suites have lower V/Sc (5.2 ± 0.4, n = 5). The lower Archean V/Sc is interpreted to reflect both deeper melt extraction from the uppermost mantle, which becomes more reduced with depth, and an intrinsically lower redox state. The pressure-corrected oxygen fugacity (expressed relative to the fayalite-magnetite-quartz buffer, ?FMQ, at 1 GPa) of Archean sample suites (?FMQ -1.19 ± 0.33, 2?) is significantly lower than that of post-Archean sample suites, including MORB (?FMQ -0.26 ± 0.44). Our results imply that the reducing Archean atmosphere was in equilibrium with Earth's mantle, and further suggest that magmatic gases crossed the threshold that allowed a build-up in atmospheric O2 levels ca. 3000 Ma, accompanied by the first "whiffs" of oxygen in sediments of that age.
Journal of Geophysical Research, Vol. 120, 10, pp. 6698-6721.
India
Geophysics - craton
Abstract: Magnetotelluric-derived two-dimensional lithospheric resistivity structure of the western Dharwar craton (WDC) and adjoining Coorg block indicates isolated low-resistivity zones in the crust and three striking upper mantle conductive features within the highly resistive Archean lithosphere. The crustal conductors in the WDC show good spatial correlation with the exposed supracrustal rocks conformable with the relic schist belt channels having conductive mineral grains. Conductive zones within the Coorg crust might be related to the relatively young (933?Ma) metamorphic processes in the area and/or possible fluids derived from the Cretaceous passage of Reunion plume in the proximity of Coorg area. A near-vertical conductive structure extending from the lower crust into the upper mantle coincides with the transition zone between Coorg and WDC. This is interpreted as the suture zone between the two tectonic blocks and provides evidence for the individuality of the two Archean terrains. An anomalous upper mantle conductive zone found beneath the craton nucleus may indicate a modified cratonic lithosphere. This could have been derived due to the collision between Coorg and WDC and possibly survived by the subsequent multiple episodes of melt and fluid infiltration processes experienced in the region. Thick (~190?km) and preserved lithosphere is mapped at the eastern segment of WDC. Resistive lithosphere of ~125?km thickness is imaged for the Coorg block.
Abstract: Geological observations indicate that there are only a few rocks of Archean Earth and no Hadean rocks on the surface of the present-day Earth. From these facts, many scientists believe that the primordial continents never existed during Hadean Earth, and the continental volume has kept increasing. On the other hand, recent studies reported the importance of the primordial continents on the origin of life, implying their existence. In this paper, we discussed the possible process that could explain the loss of the primordial continents with the assumption that they existed in the Hadean. Although depending on the timing of the initiation of plate tectonics and its convection style, subduction erosion, which is observed on the present-day Earth, might have carried the primordial continents into the deep mantle.
Contributions to Mineralogy and Petrology, Vol. 171, 45p.
Mantle
Magmatism
Abstract: The origin and source rocks of alkali-rich and SiO2-undersatured magmas in the Earth’s upper mantle are still under debate. The garnet signature in rare earth element patterns of such magmas suggests a garnet-bearing source rock, which could be garnet lherzolite or garnet pyroxenite. Partial melting experiments were performed at 2.8 GPa and 1345-1445 °C in a piston-cylinder using mixtures of natural lherzolite with either 0.4 wt% H2O and 0.4 wt% CO2 or 0.7 wt% H2O and 0.7 wt% CO2. Different designs of AuPd capsules were used for melt extraction. The most successful design included a pentagonally shaped disc placed in the top part of the capsule for sufficient melt extraction. The degrees of partial melting range from 0.2 to 0.04 and decrease with decreasing temperature and volatile content. All samples contain olivine and orthopyroxene. The amounts of garnet and clinopyroxene decrease with increasing degree of partial melting until both minerals disappear from the residue. Depending on the capsule design, the melts quenched to a mixture of quench crystals and residual glass or to glass, allowing measurement of the volatile concentrations by Raman spectroscopy. The compositions of the partial melts range from basalts through picrobasalts to foidites. Compared to literature data for melting of dry lherzolites, the presence of H2O and CO2 reduces the SiO2 concentration and increases the MgO concentration of partial melts, but it has no observable effect on the enrichment of Na2O in the partial melts. The partial melts have compositions similar to natural melilitites from intraplate settings, which shows that SiO2-undersaturated intraplate magmas can be generated by melting of garnet lherzolite in the Earth’s upper mantle in the presence of H2O and CO2.
Geochemistry International, Vol. 54, 10, pp. 992-927.
Technology
Synthetics
Abstract: The IR-peak 1450 cm-1 (H1a-center) associated with nitrogen interstitials have been studied in nitrogen-bearing diamonds synthesized at high P-T parameters in the Fe-Ni-C system. FTIR study shows that manifestation of this nitrogen form is restricted to the regions of active transformation of C-defects into A-defects, which confirms the connection of its formation with C => A aggregation process. An examination of the dependence of the 1450 cm-1 peak on the degree of nitrogen aggregation indicates that H1a-centers are not only formed during C/A aggregation but also disappear simultaneously with the end of C => A transformation. Established facts suggest direct involving of nitrogen as interstitials in the C => A aggregation and serve as strong experimental argument in support of the "interstitial" mechanism of nitrogen migration during aggregation in diamonds containing transition metals.
Abstract: Recent palaeomagnetic observations report the existence of a magnetic field on Earth that is at least 3.45 billion years old. Compositional buoyancy caused by inner-core growth is the primary driver of Earth's present-day geodynamo, but the inner core is too young to explain the existence of a magnetic field before about one billion years ago. Theoretical models propose that the exsolution of magnesium oxide--the major constituent of Earth's mantle--from the core provided a major source of the energy required to drive an early dynamo, but experimental evidence for the incorporation of mantle components into the core has been lacking. Indeed, terrestrial core formation occurred in the early molten Earth by gravitational segregation of immiscible metal and silicate melts, transporting iron-loving (siderophile) elements from the silicate mantle to the metallic core and leaving rock-loving (lithophile) mantle components behind. Here we present experiments showing that magnesium oxide dissolves in core-forming iron melt at very high temperatures. Using core-formation models, we show that extreme events during Earth's accretion (such as the Moon-forming giant impact) could have contributed large amounts of magnesium to the early core. As the core subsequently cooled, exsolution of buoyant magnesium oxide would have taken place at the core-mantle boundary, generating a substantial amount of gravitational energy as a result of compositional buoyancy. This amount of energy is comparable to, if not more than, that produced by inner-core growth, resolving the conundrum posed by the existence of an ancient magnetic field prior to the formation of the inner core.
Abstract: Recent palaeomagnetic observations1 report the existence of a magnetic field on Earth that is at least 3.45 billion years old. Compositional buoyancy caused by inner-core growth2 is the primary driver of Earth’s present-day geodynamo3, 4, 5, but the inner core is too young6 to explain the existence of a magnetic field before about one billion years ago. Theoretical models7 propose that the exsolution of magnesium oxide—the major constituent of Earth’s mantle—from the core provided a major source of the energy required to drive an early dynamo, but experimental evidence for the incorporation of mantle components into the core has been lacking. Indeed, terrestrial core formation occurred in the early molten Earth by gravitational segregation of immiscible metal and silicate melts, transporting iron-loving (siderophile) elements from the silicate mantle to the metallic core8, 9, 10 and leaving rock-loving (lithophile) mantle components behind. Here we present experiments showing that magnesium oxide dissolves in core-forming iron melt at very high temperatures. Using core-formation models11, we show that extreme events during Earth’s accretion (such as the Moon-forming giant impact12) could have contributed large amounts of magnesium to the early core. As the core subsequently cooled, exsolution7 of buoyant magnesium oxide would have taken place at the core-mantle boundary, generating a substantial amount of gravitational energy as a result of compositional buoyancy. This amount of energy is comparable to, if not more than, that produced by inner-core growth, resolving the conundrum posed by the existence of an ancient magnetic field prior to the formation of the inner core.
Abstract: Two experimental waste-rock piles (test piles), each 15 m in height × 60 m × 50 m, were constructed at the Diavik diamond mine in Northern Canada to study the behavior of low-sulfide content waste rock, with a similarly low acid-neutralization potential, in a continuous permafrost region. One test pile with an average of 0.035 wt.% S (<50 mm fraction; referred to as Type I) and a second test pile with an average of 0.053 wt.% S (<50 mm fraction; referred to as Type III) were constructed in 2006. The average carbon content in the <50 mm fraction of waste rock in the Type I test pile was 0.031 wt.% as C and in the Type III test pile was 0.030 wt.% as C. The NP:AP ratio, based on the arithmetic mean of particle-size weighted NP and AP values, for the Type I test pile was 12.2, suggesting this test pile was non-acid generating and for the Type III test pile was 2.2, suggesting an uncertain acid-generating potential. The Type I test pile maintained near-neutral pH for the 4-year duration of the study. Sulfate and dissolved metal concentrations were low, with the exception of Ni, Zn, Cd, and Co in the fourth year following construction. The pore water in the Type III test pile contained higher concentrations of SO42? and dissolved metals, with a decrease in pH to <4.7 and an annual depletion of alkalinity. Maximum concentrations of dissolved metals (20 mg L?1 Ni, 2.3 mg L?1 Cu, 3.7 mg L?1 Zn, 35 ?g L?1 Cd, and 3.8 mg L?1 Co) corresponded to decreases in flow rate, which were observed at the end of each field season when the contribution of the total outflow from the central portion of the test pile was greatest. Bacteria were present each year in spite of annual freeze/thaw cycles. The microbial community within the Type I test pile included a population of neutrophilic S-oxidizing bacteria. Each year, changes in the water quality of the Type III test-pile effluent were accompanied by changes in the microbial populations. Populations of acidophilic S-oxidizing bacteria and Fe-oxidizing bacteria became more abundant as the pH decreased and internal test pile temperatures increased. Irrespective of the cold-climate conditions and low S content of the waste rock, the geochemical and microbiological results of this study are consistent with other acid mine drainage studies; indicating that a series of mineral dissolution-precipitation reactions controls pH and metal mobility, and transport is controlled by matrix-dominated flow and internal temperatures.
Abstract: Welcome to the fifth annual report on the global diamond industry prepared by the Antwerp World Diamond Centre (AWDC) and Bain & Company. In this year’s edition, we take a comprehensive look at the year’s major developments along the diamond value chain. We focus on the reasons for the recent drop in rough and polished prices against the background of continued but slowing growth in the macro economy. As in previous years, we start with key developments along the value chain and a review of recent economic fundamentals that are the long-term drivers of diamond jewelry demand and prices. We look at the long- and short-term factors influencing prices to better understand the recent declines in polished and rough-diamond prices and expectations for their recovery. We compare 2014 results with the results of previous years and review the market to date in 2015, which has been marked by demand uncertainty and price declines. We also provide an update on the long-term outlook for the diamond industry through 2030. The 2030 supply-demand outlook is based on long-term macro-fundamental factors and incorporates the effects of the recent decline in demand from China.
Canadian Journal of Earth Sciences, Vol. 52, pp. 1169-1181.
Canada, Ontario, Attawapiskat
Deposit - Victor
Abstract: The Moose River Basin in Ontario, Canada, contains nearly 1 km of Silurian marine strata, and although it has been studied for more than a century, its precise correlation globally has not been constrained. Herein, a core from the Victor Mine in the Moose River Basin was examined for conodont biostratigraphy and carbonate carbon (13Ccarb) isotope chemostratigraphy to provide a detailed chronostratigraphic framework for the Silurian strata (Severn River, Ekwan River, and Attawapiskat formations) in the Moose River Basin. The recovery of Aspelundia expansa, Aspelundia fluegeli fluegeli, Distomodus staurognathoides, Ozarkodina polinclinata estonica, Pterospathodus eopennatus, and Aulacognathus bullatus, as well as the lower Aeronian, upper Aeronian, lower Telychian (Valgu), and ascending limb of the Sheinwoodian (Ireviken) positive carbonate carbon (13Ccarb) isotope excursions provide significantly improved chronostratigraphic correlation of Llandovery strata in the Moose River Basin.
Canadian Journal of Earth Sciences, Vol. 52, 12, pp. 1169-1181.
Canada, Ontario, Attawapiskat
Deposit - Victor
Abstract: The Moose River Basin in Ontario, Canada, contains nearly 1 km of Silurian marine strata, and although it has been studied for more than a century, its precise correlation globally has not been constrained. Herein, a core from the Victor Mine in the Moose River Basin was examined for conodont biostratigraphy and carbonate carbon (?13Ccarb) isotope chemostratigraphy to provide a detailed chronostratigraphic framework for the Silurian strata (Severn River, Ekwan River, and Attawapiskat formations) in the Moose River Basin. The recovery of Aspelundia expansa, Aspelundia fluegeli fluegeli, Distomodus staurognathoides, Ozarkodina polinclinata estonica, Pterospathodus eopennatus, and Aulacognathus bullatus, as well as the lower Aeronian, upper Aeronian, lower Telychian (Valgu), and ascending limb of the Sheinwoodian (Ireviken) positive carbonate carbon (?13Ccarb) isotope excursions provide significantly improved chronostratigraphic correlation of Llandovery strata in the Moose River Basin.
Silurian Conodont Biostratigraphy and Carbon (?13Ccarb) Isotope Stratigraphy of the Victor Mine (V-03-270-AH) Core in the Moose River Basin.
Abstract: The results of the study of diamonds with inclusions of high-pressure modification of SiO2 (coesite) by Raman spectroscopy are reported. It is established that the octahedral crystal from the Zapolyarnaya pipe is characterized by the highest residual pressure (2.7 ± 0.07 GPa). An intermediate value of this parameter (2.1 ± 0.07 GPa) was obtained for a crystal of transitional habit from the Maiskaya pipe. The minimal Raman shift was registered for coesite in diamond from the Komsomol’skaya-Magnitnaya pipe and provided a calculated residual pressure of 1.8 ± 0.03 GPa. The residual pressures for crystals from the placer deposits of the Kuoika and Bol’shaya Kuonamka rivers are 2.7 ± 0.07 and 3.1 ± 0.1 GPa, respectively. Octahedral crystals were formed in the mantle at a higher pressure than rhombododecahedral diamonds.
Journal of Structural Geology, Vol. 86, pp. 47-61.
Africa, South Africa
Deposit - Venetia
Abstract: The Beit Bridge Complex of the Central Zone (CZ) of the Limpopo Belt hosts the 519 ± 6 Ma Venetia kimberlite diatremes. Deformed shelf- or platform-type supracrustal sequences include the Mount Dowe, Malala Drift and Gumbu Groups, comprising quartzofeldspathic units, biotite-bearing gneiss, quartzite, metapelite, metacalcsilicate and ortho- and para-amphibolite. Previous studies define tectonometamorphic events at 3.3-3.1 Ga, 2.7-2.5 Ga and 2.04 Ga. Detailed structural mapping over 10 years highlights four deformation events at Venetia. Rules-based implicit 3D modelling in Leapfrog Geo provides an unprecedented insight into CZ ductile deformation and sheath folding. D1 juxtaposed gneisses against metasediments. D2 produced a pervasive axial planar foliation (S2) to isoclinal F2 folds. Sheared lithological contacts and S2 were refolded into regional, open, predominantly southward-verging, E-W trending F3 folds. Intrusion of a hornblendite protolith occurred at high angles to incipient S2. Constrictional-prolate D4 shows moderately NE-plunging azimuths defined by elongated hornblendite lenses, andalusite crystals in metapelite, crenulations in fuchsitic quartzite and sheath folding. D4 overlaps with a: 1) 2.03-2.01 Ga regional M3 metamorphic overprint; b) transpressional deformation at 2.2-1.9 Ga and c) 2.03 Ga transpressional, dextral shearing and thrusting around the CZ and d) formation of the Avoca, Bellavue and Baklykraal sheath folds and parallel lineations.
Abstract: Experiments on the synthesis of inclusions-bearing diamond were performed in the SiO2-((Mg,Ca)CO3-(Fe,Ni)S system at 6.3 GPa and 1650-1750 °C, using a multi-anvil high pressure apparatus of the "split-sphere" type. Diamond synthesis was realized in the "sandwich-type" experiments, where the carbonate-oxide mixture acted as a source of both CO2-dominated fluid and carbonate-silicate melt, and Fe,Ni-sulfide played a role of reducing agent. As a result of redox reactions in the carbonate-oxide-sulfide system, diamond was formed in association with graphite and Mg,Fe-silicates, coexisting with CO2-rich fluid, carbonate-silicate and sulfide melts. The synthesized diamonds are predominantly colorless or light-yellow monocrystals with octahedral habit (20-200 ?m), and polycrystalline aggregates (300-400 ?m). Photoluminescence spectroscopy revealed defects related to nickel impurity (S3 optical centers), which are characteristic of many diamonds in nature. The density of diamond crystallization centers over the entire reaction volume was ~3 × 102-103 cm? 3. The overwhelming majority of diamonds synthesized were inclusions-bearing. According to Raman spectroscopy data, diamond trapped a wide variety of inclusions (both mono- and polyphase), including orthopyroxene, olivine, carbonate-silicate melt, sulfide melt, CO2-fluid, graphite, and diamond. The Raman spectral pattern of carbonate-silicate melt inclusions have bands characteristic of magnesite and orthopyroxene (± SiO2). The spectra of sulfide melt displayed marcasite and pyrrhotite peaks. We found that compositions of sulfide, silicate and carbonate phases are in good agreement not only with diamond crystallization media in experiments, but with data on natural diamond inclusions of peridotitic and eclogitic parageneses. The proposed methodological approach of diamond synthesis can be used for experimental simulation of the formation of several types of mineral, fluid and melt inclusions, observed in natural diamonds.
Wustite stability in the presence of CO2 -fluid and a carbonate silicate melt: implications for the graphite/diamond formation and generation of Fe-rich mantle metasomatic agents.
Abstract: Experimental simulation of the interaction of wüstite with a CO2-rich fluid and a carbonate-silicate melt was performed using a multianvil high-pressure split-sphere apparatus in the FeO-MgO-CaO-SiO2-Al2O3-CO2 system at a pressure of 6.3 GPa and temperatures in the range of 1150 °C–1650 °C and with run time of 20 h. At relatively low temperatures, decarbonation reactions occur in the system to form iron-rich garnet (Alm75Prp17Grs8), magnesiowüstite (Mg# ? 0.13), and CO2-rich fluid. Under these conditions, magnesiowüstite was found to be capable of partial reducing CO2 to C0 that leads to the formation of Fe3+-bearing magnesiowüstite, crystallization of magnetite and metastable graphite, and initial growth of diamond seeds. At T ? 1450 °C, an iron-rich carbonate-silicate melt (FeO ~ 56 wt.%, SiO2 ~ 12 wt.%) forms in the system. Interaction between (Fe,Mg)O, SiO2, fluid and melt leads to oxidation of magnesiowüstite and crystallization of fayalite-magnetite spinel solid solution (1450 °C) as well as to complete dissolution of magnesiowüstite in the carbonate-silicate melt (1550 °C–1650 °C). In the presence of both carbonate-silicate melt and CO2-rich fluid, dissolution (oxidation) of diamond and metastable graphite was found to occur. The study results demonstrate that under pressures of the lithospheric mantle in the presence of a CO2-rich fluid, wüstite/magnesiowüstite is stable only at relatively low temperatures when it is in the absolute excess relative to CO2-rich fluid. In this case, the redox reactions, which produce metastable graphite and diamond with concomitant partial oxidation of wüstite to magnetite, occur. Wüstite is unstable under high concentrations of a CO2-rich fluid as well as in the presence of a carbonate-silicate melt: it is either completely oxidized or dissolves in the melt or fluid phase, leading to the formation of Fe2 +- and Fe3 +-enriched carbonate-silicate melts, which are potential metasomatic agents in the lithospheric mantle.
Contributions to Mineralogy and Petrology, Vol. 171, 7, 20p.
Africa, Tanzania
Tectonics
Abstract: North Tanzanian Divergence is the first stage of continental break-up of East African Rift (<6 Ma) and is one of the most concentrated areas of carbonatite magmatism on Earth, with singular Oldoinyo Lengai and Kerimasi volcanoes. Hanang volcano is the southernmost volcano in the North Tanzanian Divergence and the earliest stage of rift initiation. Hanang volcano erupted silica-undersaturated alkaline lavas with zoned clinopyroxene, nepheline, andradite-schorlomite, titanite, apatite, and pyrrhotite. Lavas are low MgO-nephelinite with low Mg# and high silica content (Mg# = 22.4–35.2, SiO2 = 44.2–46.7 wt%, respectively), high incompatible element concentrations (e.g. REE, Ba, Sr) and display Nb–Ta fractionation (Nb/Ta = 36–61). Major elements of whole rock are consistent with magmatic differentiation by fractional crystallization from a parental melt with melilititic composition. Although fractional crystallization occurred at 9–12 km and can be considered as an important process leading to nephelinite magma, the complex zonation of cpx (e.g. abrupt change of Mg#, Nb/Ta, and H2O) and trace element patterns of nephelinites recorded magmatic differentiation involving open system with carbonate–silicate immiscibility and primary melilititic melt replenishment. The low water content of clinopyroxene (3–25 ppm wt. H2O) indicates that at least 0.3 wt% H2O was present at depth during carbonate-rich nephelinite crystallization at 340–640 MPa and 1050–1100 °C. Mg-poor nephelinites from Hanang represent an early stage of the evolution path towards carbonatitic magmatism as observed in Oldoinyo Lengai. Paragenesis and geochemistry of Hanang nephelinites require the presence of CO2-rich melilititic liquid in the southern part of North Tanzanian Divergence and carbonate-rich melt percolations after deep partial melting of CO2-rich oxidized mantle source.
Geochimica et Cosmochimica Acta, Vol. 191, pp. 187-202.
Australia
Jack Hills REE
Abstract: Despite the robust nature of zircon in most crustal and surface environments, chemical alteration, especially associated with radiation damaged regions, can affect its geochemistry. This consideration is especially important when drawing inferences from the detrital record where the original rock context is missing. Typically, alteration is qualitatively diagnosed through inspection of zircon REE patterns and the style of zoning shown by cathodoluminescence imaging, since fluid-mediated alteration often causes a flat, high LREE pattern. Due to the much lower abundance of LREE in zircon relative both to other crustal materials and to the other REE, disturbance to the LREE pattern is the most likely first sign of disruption to zircon trace element contents. Using a database of 378 (148 new) trace element and 801 (201 new) oxygen isotope measurements on zircons from Jack Hills, Western Australia, we propose a quantitative framework for assessing chemical contamination and exchange with fluids in this population. The Light Rare Earth Element Index is scaled on the relative abundance of light to middle REE, or LREE-I = (Dy/Nd) + (Dy/Sm). LREE-I values vary systematically with other known contaminants (e.g., Fe, P) more faithfully than other suggested proxies for zircon alteration (Sm/La, various absolute concentrations of LREEs) and can be used to distinguish primary compositions when textural evidence for alteration is ambiguous. We find that zircon oxygen isotopes do not vary systematically with placement on or off cracks or with degree of LREE-related chemical alteration, suggesting an essentially primary signature. By omitting zircons affected by LREE-related alteration or contamination by mineral inclusions, we present the best estimate for the primary igneous geochemistry of the Jack Hills zircons. This approach increases the available dataset by allowing for discrimination of on-crack analyses (and analyses with ambiguous or no information on spot placement or zircon internal structures) that do not show evidence for chemical alteration. It distinguishes between altered and unaltered samples in ambiguous cases (e.g., relatively high Ti), identifying small groups with potentially differing provenance from the main Jack Hills population. Finally, filtering of the population using the LREE-I helps to more certainly define primary correlations among trace element variables, potentially relatable to magmatic compositional evolution.
Geochimica et Cosmochimica Acta, Vol. 191, pp. 187-202.
Australia
Geochemistry
Abstract: Despite the robust nature of zircon in most crustal and surface environments, chemical alteration, especially associated with radiation damaged regions, can affect its geochemistry. This consideration is especially important when drawing inferences from the detrital record where the original rock context is missing. Typically, alteration is qualitatively diagnosed through inspection of zircon REE patterns and the style of zoning shown by cathodoluminescence imaging, since fluid-mediated alteration often causes a flat, high LREE pattern. Due to the much lower abundance of LREE in zircon relative both to other crustal materials and to the other REE, disturbance to the LREE pattern is the most likely first sign of disruption to zircon trace element contents. Using a database of 378 (148 new) trace element and 801 (201 new) oxygen isotope measurements on zircons from Jack Hills, Western Australia, we propose a quantitative framework for assessing chemical contamination and exchange with fluids in this population. The Light Rare Earth Element Index is scaled on the relative abundance of light to middle REE, or LREE-I = (Dy/Nd) + (Dy/Sm). LREE-I values vary systematically with other known contaminants (e.g., Fe, P) more faithfully than other suggested proxies for zircon alteration (Sm/La, various absolute concentrations of LREEs) and can be used to distinguish primary compositions when textural evidence for alteration is ambiguous. We find that zircon oxygen isotopes do not vary systematically with placement on or off cracks or with degree of LREE-related chemical alteration, suggesting an essentially primary signature. By omitting zircons affected by LREE-related alteration or contamination by mineral inclusions, we present the best estimate for the primary igneous geochemistry of the Jack Hills zircons. This approach increases the available dataset by allowing for discrimination of on-crack analyses (and analyses with ambiguous or no information on spot placement or zircon internal structures) that do not show evidence for chemical alteration. It distinguishes between altered and unaltered samples in ambiguous cases (e.g., relatively high Ti), identifying small groups with potentially differing provenance from the main Jack Hills population. Finally, filtering of the population using the LREE-I helps to more certainly define primary correlations among trace element variables, potentially relatable to magmatic compositional evolution.
Abstract: The Variscan French Massif Central (FMC) is classically described as a stack of nappes with increasing metamorphism from the bottom (parautochthonous unit) to the top (lower and upper gneiss units). Ultra-high pressure (UHP) metamorphism was already recognized in the uppermost units, with notably coesite-bearing rocks. We report the first finding of metamorphic microdiamonds in the parautochthonous unit, revealing that the UHP event affected the whole stack of nappes and also that the pressures reached are above what was previously expected, since the presence of diamond, according to the peak temperature estimates for this unit, indicates pressures of ca. 3 GPa (i.e. 100 km depth). At the scale of the FMC, this finding adds complexity to the established models. On a broader scale, this adds evidence of similarity between this part of the belt and other UHP Variscan terranes such as the Erzgebirge and the Bohemian Massif.
Harper Collins NY., ISBN 978- 0062323774 US $ 30.00
Book
Abstract: From the author of Women from the Ankle Down comes a lively cultural biography of diamonds, which explores our society’s obsession with the world’s most brilliant gemstone and the real-world characters who make them shine. "A diamond is forever." Who among us doesn’t recognize this phrase and, with it, the fascination that these shiny gemstones hold in our collective imagination as symbols of royalty, stars, and eternal love? But who gave us this catchphrase? Where do these gemstones and their colorful legacies originate? How did they become our culture’s symbol of engagement and marriage? Why have they retained their coveted status throughout the centuries? Rachelle Bergstein’s cultural biography of the diamond illuminates the enticing, often surprising story of our society’s enduring obsession with the hardest gemstone—and the people who have worked tirelessly to ensure its continued allure. From the South African mines where most diamonds have been sourced since the late 1890s to the companies who have fought to monopolize them; from the stars who have dazzled in them to the people behind the scenes who have carefully crafted our understanding of their value—Brilliance and Fire offers a glittering history of the world’s most coveted gemstone and its greatest champions and most colorful enthusiasts.
Geological Society of London Special Publication Supercontinent Cycles through Earth History., Vol. 424, pp. 47-81.
Australia
Supercontinents
Abstract: The Australian continent records c. 1860-1800 Ma orogenesis associated with rapid accretion of several ribbon micro-continents along the southern and eastern margins of the proto-North Australian Craton during Nuna assembly. The boundaries of these accreted micro-continents are imaged in crustal-scale seismic reflection data, and regional gravity and aeromagnetic datasets. Continental growth (c. 1860-1850 Ma) along the southern margin of the proto-North Australian Craton is recorded by the accretion of a micro-continent that included the Aileron Terrane (northern Arunta Inlier) and the Gawler Craton. Eastward growth of the North Australian Craton occurred during the accretion of the Numil Terrane and the Abingdon Seismic Province, which forms part of a broader zone of collision between the northwestern margins of Laurentia and the proto-North Australian Craton. The Tickalara Arc initially accreted with the Kimberley Craton at c. 1850 Ma and together these collided with the proto-North Australian Craton at c. 1820 Ma. Collision between the West Australian Craton and the proto-North Australian Craton at c. 1790-1760 Ma terminated the rapid growth of the Australian continent.
Abstract: In this experimental study we obtained new mineral/melt (DF = cmineral/cmelt) partitioning data for fluorine in a bimineralic hydrous eclogite under Earth's upper mantle conditions (4-6 GPa, 1460-1550 °C). Omphacitic clinopyroxene displays mineral/melt partition coefficients between DF = 0.056 ± 0.005 and DF = 0.074 ± 0.001. Garnet partition coefficients are consistently lower with an average partition coefficient of DF = 0.016 ± 0.003. We found that omphacitic clinopyroxene is the dominant nominally fluorine-free phase in subducted oceanic crust and hence omphacite is expected to be the major fluorine carrier during subduction of crust into the deeper mantle. Together with previously obtained partitioning data we propose that the oceanic crust can host more fluorine per mass unit than the underlying depleted oceanic mantle. If the majority of entrained fluorine is recycled into Earth's transition zone it is possible that the fluorine is either incorporated into high-pressure transition zone phases or released during high-pressure phase transformations and forming fluorine-rich small degree partial melts. Both scenarios are supported by elevated fluorine concentration in ocean island basalts, kimberlites, and lamproites. Combining the fluorine partitioning data with water partitioning data yields a plausible process to generate lamproitic magmas with a high F/H2O ratio. The enrichment of fluorine relative to H2O is triggered by multiple episodes of small degree melting that deplete the residual more in H2O than in fluorine, caused by the approximately three times smaller mineral-melt partition coefficients of H2O.
Abstract: Volcanic eruptions often occur simultaneously1, 2, 3, 4 or tap multiple magma reservoirs5, 6. Such lateral interactions between magmatic systems are attributed to stress changes7, 8 or hydraulic connections4, 8, 9, 10 but the precise conditions under which coupled eruptions occur have yet to be quantified. Here we use interferometric synthetic aperture radar satellite data to analyse the surface deformation generated by volcanic unrest in the Kenyan Rift. We identify several magma sources located at depths of 2-5?km; importantly, sources that are spaced less than about 10?km apart interact, whereas those spaced more than about 25?km apart do not. However, volcanoes up to 25?km apart have interacted in the geologic past1, 11. Thus, volcanic coupling is not simply controlled by the distance between the magma reservoirs. We then consider different tectonic settings globally, including intraplate volcanoes such as Hawaii and Yellowstone, arc volcanism in Alaska and Chile, and other rift settings, such as New Zealand, Iceland and Afar. We find that the most closely spaced magmatic interactions are controlled by the extent of a shallow crystal mush layer, stress changes can couple large eruptions over distances of about 20-40?km, and only large dyke intrusions or subduction earthquakes could generate coupled eruptions over distances of about 50-100?km.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 273-298.
Mantle
Carbon
Abstract: Pyrogenic carbon (PyC; includes soot, char, black carbon, and biochar) is produced by the incomplete combustion of organic matter accompanying biomass burning and fossil fuel consumption. PyC is pervasive in the environment, distributed throughout the atmosphere as well as soils, sediments, and water in both the marine and terrestrial environment. The physicochemical characteristics of PyC are complex and highly variable, dependent on the organic precursor and the conditions of formation. A component of PyC is highly recalcitrant and persists in the environment for millennia. However, it is now clear that a significant proportion of PyC undergoes transformation, translocation, and remineralization by a range of biotic and abiotic processes on comparatively short timescales. Here we synthesize current knowledge of the production, stocks, and fluxes of PyC as well as the physical and chemical processes through which it interacts as a dynamic component of the global carbon cycle.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, 10, pp. 3436-3455.
Mantle
Geophysics - seismics
Abstract: Relating seismic anisotropy to mantle flow requires detailed understanding of the development and evolution of olivine crystallographic preferred orientation (CPO). Recent experimental and field studies have shown that olivine CPO evolution depends strongly on the integrated deformation history, which may lead to differences in how the corresponding seismic anisotropy should be interpreted. In this study, two widely used numerical models for CPO evolution—D-Rex and VPSC—are evaluated to further examine the effect of deformation history on olivine texture and seismic anisotropy. Building on previous experimental work, models are initiated with several different CPOs to simulate unique deformation histories. Significantly, models initiated with a preexisting CPO evolve differently than the CPOs generated without preexisting texture. Moreover, the CPO in each model evolves differently as a function of strain. Numerical simulations are compared to laboratory experiments by Boneh and Skemer (2014). In general, the D-Rex and VPSC models are able to reproduce the experimentally observed CPOs, although the models significantly over-estimate the strength of the CPO and in some instances produce different CPO from what is observed experimentally. Based on comparison with experiments, recommended parameters for D-Rex are: M*?=?10, ?*?=?5, and ??=?0.3, and for VPSC: ??=?10-100. Numerical modeling confirms that CPO evolution in olivine is highly sensitive to the details of the initial CPO, even at strains greater than 2. These observations imply that there is a long transient interval of CPO realignment which must be considered carefully in the modeling or interpretation of seismic anisotropy in complex tectonic settings.
Abstract: In this study, 660 diamonds from Igarapé Lajes Diggings (Roosevelt and Aripuanã Park indigenous areas), in Amazonian craton, Rondônia State, Brazil, were investigated. Their morphological, optical and surface characteristics were described using optical and scanning electron microscopy (SEM), cathodoluminescence (CL) and infrared spectroscopy (FTIR). The results demonstrated a predominance of resorbed crystals with many surface corrosion features, generally colorless, and led to the identification of four distinct groups: G1, G2, G3 and G4. Group G1 presents features of secondary sources while G2 and G4 show only primary features, some of which are not described in literature. Group G3 is similar to the other groups, however, is composed of less resorbed specimens with primary octahedral morphology relatively well preserved, indicating shorter time of exposure to dissolution effects. Cathodoluminescence in G2 is attributed to features of plastic deformation and to low contents of nitrogen (< 100 ppm, Type II) and high aggregation (IaB). G4 shows homogeneous blue CL, high contents of nitrogen (700 to 1000 ppm) and intermediate aggregation (IaAB). G1 presents luminescence influenced by radiation effects and populations with N contents and aggregation in the same ranges of G2 and G4, suggesting that the primary sources of the three groups can be the same. The relationship of nitrogen content versus aggregation state indicates higher temperatures of formation for G2 and lower for G4. The obtained data suggests that diamonds of G2 originated in sublithospheric mantle as has also been reported in nearby deposits (Machado River and Juína). The employed techniques were also effective in distinguishing diamonds from Roosevelt Reserve and from other localities, indicating that they could be used for improvement of certification procedures of diamonds of unknown origin.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 14p.
Africa, Lesotho
Deposit - Letseng
Abstract: Bateman Engineering managed the establishment of a second diamond treatment plant at the Letseng Mine in the Mokhotlong District of northern Lesotho, about 100 km from the town of Buthe Buthe. Letseng Diamonds Proprietary Limited, is owned 70 % by Gem Diamonds and 30 % by the Government of the Kingdom of Lesotho. The second plant, which commenced construction in late 2006, doubled Letseng Mines' hard rock processing capacity from 2.6 million t/yr to 5.2 million t/yr, making it the worlds' seventh largest diamond mine by throughput. Bateman Engineering provided the engineering design, procurement and construction management of the new plant.
Abstract: The layered agpaitic nepheline syenites (kakortokites) of the Ilímaussaq complex, South Greenland, host voluminous accumulations of eudialyte-group minerals (EGM). These complex Na-Ca-zirconosilicates contain economically attractive levels of Zr, Nb and rare-earth elements (REE), but have commonly undergone extensive autometasomatic/hydrothermal alteration to a variety of secondary mineral assemblages. Three EGM alteration assemblages are recognized, characterized by the secondary zirconosilicates catapleiite, zircon and gittinsite. Theoretical petrogenetic grid models are constructed to assess mineral stabilities in terms of component activities in the late-stage melts and fluids. Widespread alteration of EGM to catapleiite records an overall increase in water activity, and reflects interaction of EGM with late-magmatic Na-, Cl- and F-rich aqueous fluids at the final stages of kakortokite crystallization. Localized alteration of EGM and catapleiite to the rare Ca-Zr silicate gittinsite, previously unidentified at Ilímaussaq, requires an increase in CaO activity and suggests post-magmatic interaction with Ca-Sr bearing aqueous fluids. The pseudomorphic replacement of EGM in the kakortokites was not found to be associated with significant remobilization of the primary Zr, Nb and REE mineralization, regardless of the high concentrations of potential transporting ligands such as F and Cl. We infer that the immobile behaviour essentially reflects the neutral to basic character of the late-magmatic fluids, in which REE-F compounds are insoluble and remobilization of REE as Cl complexes is inhibited by precipitation of nacareniobsite-(Ce) and various Ca-REE silicates. A subsequent decrease in F- activity would furthermore restrict the mobility of Zr as hydroxyl-fluoride complexes, and promote precipitation of the secondary zirconosilicates within the confines of the replaced EGM domains.
Thesis, University of Pretoria, Ms Metallurgical Engineering 279p. Pdf
Africa, Angola, South Africa
Deposit - AC 56-5-1, Venetia Red
Abstract: Kimberlite is the host rock from which diamonds are mined. The mineralogical features for kimberlites vary greatly with country, origin, depth and type of kimberlite. Kimberlites can contain various clay species with some kimberlites containing predominantly clay minerals. The presence of these clay minerals in the ore can cause difficulty in dewatering due to high flocculant demand, poor supernatant clarity and low settling rates. Identifying critical parameters that can predict the settling behaviour of African kimberlite slurries will assist the process engineer to predict the settling behaviour of different kimberlite slurries. Especially identifying the kimberlites that will most likely not settle with normal flocculant dosage rates is useful. From first principles the settling of a particle is described by Stoke’s law which incorporates the density of the particle and size of the particle as the inherent particle variables. In this case density is assumed constant and therefore the size of particles influence the settling rate of particles to a great extent. This study therefore investigated the influence of particle size on settling rate and whether the particle size distribution showed correlation with settling rate when regression modelling was fitted on the data. Other variables that were tested for correlation with settling were pH when the kimberlite is mixed in water as well as various mineralogical features of the ore. Fitting a simple model to any of these properties or combinations of these properties was attempted which would allow for prediction of settling behaviour. The mineralogical features were classified by evaluating the mineral composition, fractional elemental analysis, cation exchange capacity and the exchangeable sodium percentage of the different kimberlites. These variables were tested as well as their settling behaviour with 18 different African kimberlite samples. The settling rate and slurry bed compaction during natural settling as well coagulant and flocculant assisted settling were measured for the kimberlite slurries. The best performing coagulant and flocculant for each kimberlite were combined to evaluate potential improvements in the settling rates and slurry bed compaction compared to current settling practices that only utilise flocculant additions. Especially the use of coagulant for kimberlites that did not show settling with only flocculants was evaluated. For these 18 kimberlites only 2 kimberlites did not settle with the use of flocculants with settling rates varying between 10.7m/h and 25m/h. Both these kimberlites also did not settle with the combination of coagulant and flocculant, but could only settle with only coagulant additions at settling rates of 1.9 m/h and 2.2 m/h. Regression analysis fitted to the settling rate investigated the influence of particle size, pH and mineralogical features on settling. For representation of the particle size two data points from the Particle Size Distribution (PSD) was utilised which represented the fine material and the coarser material. These two data points were taken at percentage passing 7.5 ?m and 75 ?m. Regression data for kimberlite with flocculant additions showed that particle size and the pH of the slurry were identified as significant parameters in predicting settling. The regression data showed a R2 of 0.78 for the settling rate and an adjusted R2 of 0.79 for the slurry bed depth.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 14p.
Africa, South Africa
Deposit - Cullinan
Abstract: There are many underground mining software tools available to plan and schedule the development of underground mines. A shortfall of these tools is the optimization of the underground equipment and strategy in order to maximize the development rate. This paper will illustrate how the SimMine® software was used to maximize underground development at Petra Diamonds' Cullinan Diamond Mine. It will also determine the effect of various development strategies and equipment capacities on the underground development rate and pinpoint potential bottlenecks in the mine development cycle.
Full Article Download:
Abstract: Geosoft is pleased to announce the launch of the Botswana Geoscience Portal, a partnership initiative with the Botswana Geoscience Institute and industry sponsors. Developed and hosted by Geosoft, the portal provides free access to multi-disciplinary datasets from Ngamiland, a district in the country's northwest. It is available online at: http://geoscienceportal.geosoft.com/Botswana/search. The geoscience portal aims to help Botswana attract new investment in resource exploration, improve transparency and stimulate collaboration between government, industry and the public to advance understanding of the economic and social needs of the North-West district. Tiyapo Hudson Ngwisanyi, Chief Executive Officer of the Botswana Geoscience Institute said: “Making geoscientific data more accessible and transparent is critical to furthering understanding of the North-West district, and encouraging new investment in resource exploration within Africa. The portal is a welcome development that will assist us in promoting ongoing, productive collaboration between government and industry.” “Geosoft is excited to be part of an initiative that demonstrates how government and industry can work together to encourage mineral exploration investment and thus downstream economic growth in the country,” said Tim Dobush, Chief Executive Officer of Geosoft. “We are continually engaging with government organizations like the Botswana Geoscience Institute and industry leaders to innovate, and maximize the value of geoscience data for resource discovery and to meet the social/economic needs of the broader public sector.” Data available on the Botswana Geoscience Portal includes airborne geophysics, ground geophysics and geochemistry. Future updates will provide access to borehole data, remote sensing, seismic surveys and information products including interpretations and 3D models.- See more at: http://www.geosoft.com/news/botswana-geoscience-portal-goes-live#sthash.CZGrHC4h.dpuf
Journal of Geophysical Research,, Vol. 121, 7, pp. 5013-5030.
Canada
Subduction
Abstract: The cratonic cores of the continents are remarkably stable and long-lived features. Their ability to resist destructive tectonic processes is associated with their thick (?250 km), cold, chemically depleted, buoyant lithospheric keels that isolate the cratons from the convecting mantle. The formation mechanism and tectonic stability of cratonic keels remains under debate. To address this issue, we use P wave and S wave relative arrival-time tomography to constrain upper mantle structure beneath southeast Canada and the northeast USA, a region spanning three quarters of Earth's geological history. Our models show three distinct, broad zones: Seismic wave speeds increase systematically from the Phanerozoic coastal domains, through the Proterozoic Grenville Province, and to the Archean Superior craton in central Québec. We also recover the NW-SE trending track of the Great Meteor hot spot that crosscuts the major tectonic domains. The decrease in seismic wave speed from Archean to Proterozoic domains across the Grenville Front is consistent with predictions from models of two-stage keel formation, supporting the idea that keel growth may not have been restricted to Archean times. However, while crustal structure studies suggest that Archean Superior material underlies Grenvillian age rocks up to ?300 km SE of the Grenville Front, our tomographic models show a near-vertical boundary in mantle wave speed directly beneath the Grenville Front. We interpret this as evidence for subduction-driven metasomatic enrichment of the Laurentian cratonic margin, prior to keel stabilization. Variable chemical depletion levels across Archean-Proterozoic boundaries worldwide may thus be better explained by metasomatic enrichment than inherently less depleted Proterozoic composition at formation.
Journal of Physical Chemistry, 10.1002/ chemv.201600068
Technology
Rare earths
Abstract: Scientists in the U.S. have provided a new understanding of the structure and crystal properties of the main mineral source of rare earth metals, bastnäsites. They are fluoro-carbonate minerals which contain ytterbium, lanthanum, and cerium, among other elements. The researchers used powder X-ray diffraction (XRD) and density functional theory (DFT) to reveal details of the minerals' structure and interfacial energy. The work could help in the design of new reagents for selective binding to mineral interfaces and could improve the recovery of rare metals by froth flotation, which is the major stage of ore beneficiation. Increasing flotation concentrate grades makes the subsequent leaching and rare earth separations more efficient and economic. Rare earth elements are increasingly important in modern technology - for electronics, catalysis, possible future quantum devices, and especially for clean energy applications like wind and solar energy, energy-efficient lighting, and electric vehicles. For example, neodymium and praseodymium are used in strong permanent magnets, lanthanum and cerium are used in batteries, metal alloys, petroleum refining, and catalysis, and ytterbium is a common material in phosphors for displays and in high-tech ceramics. These elements, which are defined as the fifteen lanthanides, as well as scandium and yttrium, are commonly found in the same ores. Despite what their name suggests, they are not actually rare, but they are difficult and costly to refine. As such, it is crucial that scientists and technologists optimize ore beneficiation to provide an enriched feedstock for the subsequent efficient extraction of these elements from the mined mineral ores in which they are found.
Abstract: The composition of Earth's crust depends on the style of plate tectonics and of the melting regimes in the mantle. Analyses of the oldest identified rocks suggest that these styles and the resulting crust have changed over Earth's history.
Abstract: Gem diamonds are highly valued for their color, or the absence of it. However, the myriad of colors and patterns that are revealed when a diamond is exposed to ultraviolet light are often more impressive than the stones themselves. High energy (i.e., ultra-shortwave <230 nm) UV light from the DiamondView instrument excites fluorescence from natural and synthetic diamonds that not only provides a tremendous amount of information about defect incorporation during growth, but also stunningly artistic designs. Fluorescence patterns reveal details about the original morphology of a diamond even after all of the natural surfaces are removed. In addition, concentrations of luminescent centers along structurally controlled planes in a natural diamond lattice provide information about the original distribution of impurities and other defects and the thermal and deformational history of diamonds as they spend millions (or billions) of years in the Earth’s mantle and then are rapidly erupted in a kimberlite magma. Likewise, the distribution of nitrogen, boron, and nickel-related luminescence in synthetic diamonds give clues to the temperature, pressure, and catalytic conditions under which they were grown in a laboratory. Evaluation of the fluorescence patterns from diamonds helps the scientist better understand the incorporation and migration of atomic level defects in the diamond structure while allowing the artist to appreciate some of the most unusual and amazing patterns that nature produces.
Abstract: Stable (C and O) isotope data from carbonates are one of the most important methods used to infer genetic processes in carbonatites. However despite their ubiquitous use in geological studies, it is suspected that carbonates are susceptible to dissolution-reprecipitation and isotopic resetting, especially in shallow intrusions, and may not be the best records of either igneous or hydrothermal processes. Apatite, however, should be much less susceptible to these resetting problems but has not been used for O isotope analysis. In this contribution, a novel bulk-carbonatite method for the analysis of O isotopes in the apatite PO4 site demonstrates a more robust record of stable isotope values. Analyses of apatite from five carbonatites with magmatic textures establishes a preliminary Primary Igneous Apatite (PIA) field of ?18O = + 2.5 to + 6.0‰ (VSMOW), comparable to Primary Igneous Carbonatite (PIC) compositions from carbonates. Carbonate and apatite stable isotope data are compared in 10 carbonatite samples from Songwe Hill, Malawi. Apatite is heavy rare earth element (HREE) enriched at Songwe and, therefore, oxygen isotope analyses of this mineral are ideal for understanding HREE-related mineralisation in carbonatites. Carbonate C and O isotope ratios show a general trend, from early to late in the evolution, towards higher ?18O values (+ 7.8 to + 26.7‰, VSMOW), with a slight increase in ?13C (? 4.6 to ? 0.1‰, VPDB). Oxygen isotope ratios from apatite show a contrary trend, decreasing from a PIA field towards more negative values (+ 2.5 to ? 0.7‰, VSMOW). The contrasting results are interpreted as the product of the different minerals recording fluid interaction at different temperatures and compositions. Modelling indicates the possibility of both a CO2 rich fluid and mixing between meteoric and deuteric waters. A model is proposed where brecciation leads to depressurisation and rapid apatite precipitation. Subsequently, a convection cell develops from a carbonatite, interacting with surrounding meteoric water. REE are likely to be transported in this convection cell and precipitate owing to decreasing salinity and/or temperature.
Abstract: The Tundulu and Kangankunde carbonatite complexes in the Chilwa Alkaline Province, Malawi, contain late-stage, apatite-rich lithologies termed quartz-apatite rocks. Apatite in these rocks can reach up to 90 modal% and displays a distinctive texture of turbid cores and euhedral rims. Previous studies of the paragenesis and rare earth element (REE) content of the apatite suggest that heavy REE (HREE)-enrichment occurred during the late-stages of crystallization. This is a highly unusual occurrence in intrusions that are otherwise light REE (LREE) enriched. In this contribution, the paragenesis and formation of the quartz-apatite rocks from each intrusion is investigated and re-evaluated, supported by new electron microprobe (EPMA) and laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) data to better understand the mechanism of HREE enrichment. In contrast to the previous work at Tundulu, we recognize three separate stages of apatite formation, comprising an “original” euhedral apatite, “turbid” apatite, and “overgrowths” of euhedral late apatite. The crystallization of synchysite-(Ce) is interpreted to have occurred subsequent to all phases of apatite crystallization. The REE concentrations and distributions in the different minerals vary, but generally higher REE contents are found in later-stage apatite generations. These generations are also more LREE-enriched, relative to apatite that formed earlier. A similar pattern of increasing LREE-enrichment and increased REE concentrations toward later stages of the paragenetic sequence is observed at Kangankunde, where two generations of apatite are observed, the second showing higher REE concentrations, and relatively higher LREE contents. The changing REE distribution in the apatite, from early to late in the paragenetic sequence, is interpreted to be caused by a combination of dissolution-reprecipitation of the original apatite and the preferential transport of the LREE complexes by F- and Cl-bearing hydrothermal fluids. Successive pulses of these fluids transport the LREE out of the original apatite, preferentially re-precipitating it on the rim. Some LREE remained in solution, precipitating later in the paragenetic sequence, as synchysite-(Ce). The presence of F is supported by the F content of the apatites, and presence of REE-fluorcarbonates. Cl is not detected in the apatite structure, but the role of Cl is suggested from comparison with apatite dissolution experiments, where CaCl2 or NaCl cause the reprecipitation of apatite without associated monazite. This study implies that, despite the typically LREE enriched nature of carbonatites, significant degrees of hydrothermal alteration can lead to certain phases becoming residually enriched in the HREE. Although at Tundulu the LREE-bearing products are re-precipitated relatively close to the REE source, it is possible that extensive hydrothermal activity in other carbonatite complexes could lead to significant, late-stage fractionation of the REE and the formation of HREE minerals.
Weidenfeld & Nicholson London Book Publisher, Amazon.com approx. 12.00 paperback
Technology
Book
Abstract: Humans have put the Earth’s resources to extraordinary use. Carbon provides us with heat, light and mobility at the flick of a switch. From silver came photography, the preservation of memories, and a task which for centuries was confined to painters, sketchers and our imaginations. Silver in turn was eventually replaced by silicon, an element which enables us to communicate and transmit information across the globe in an instant. But our use of the Earth’s resources is not always for the benefit of humankind. Our relationship with the elements is one of great ambivalence. Uranium produces both productive nuclear power and destructive atomic bombs; iron is the bloody weapon of war, but also the economic tool of peace; our desire for alluring gold is the foundation of global trade, but has also led to the death of millions. This book vividly describes how seven key elements have shaped the world around us - for good and for bad. Seven Elements takes you on an adventure of human passion, ingenuity and discovery. This journey is far from over: we continue to find surprising new uses for these seven elements. Discover how titanium pervades modern consumer society; how natural gas is transforming the global energy sector; and how an innovative new form of carbon could be starting a technological revolution. Seven Elements is a unique mix of science, history and politics, interwoven with the author’s extensive personal and professional experience.
Abstract: Diamonds are forever. But what of the definition of conflict diamonds used by the Kimberley Process (KP)? Despite the fact that civil society has raised attention to the cloudy issue of state-perpetrated diamond-related human rights abuses throughout the past decade, the continued longevity of the central definition around which the Kimberley Process revolves still appears to be a crystal-clear fact. As it turns out, calls to broaden the scope of the conflict diamond definition have not been successful because several discourse manipulations within the KP have had formative effects on other actors’ identities and interests. Discourse spacing-the strategic allocation of ‘appropriate’ spaces for certain discourses within a particular institutionalized setting-has been strategically employed in an attempt to place boundaries on the redefinition discourse. By claiming that addressing human rights abuses lies beyond the mandate of the KP, several KP participant states have sought to convince others that discussing redefinition has no place on the KP reform agenda. Discourse timing has also been key, where numerous African states’ perceptions of redefinition were influenced by accusations of neo-colonial intent on the part of western KP participant states that stemmed from a sanctions debate that was taking place parallel to the redefinition debate. The article finds that these two occurrences, alongside the KP’s consensus based decision-making structure and several KP participant states’ fears about setting a human rights precedent, have obstructed the road to the redefinition of conflict diamonds.
Abstract: Rifted margins are formed by persistent stretching of continental lithosphere until breakup is achieved. It is well known that strain-rate-dependent processes control rift evolution1, 2, yet quantified extension histories of Earth’s major passive margins have become available only recently. Here we investigate rift kinematics globally by applying a new geotectonic analysis technique to revised global plate reconstructions. We find that rifted margins feature an initial, slow rift phase (less than ten millimetres per year, full rate) and that an abrupt increase of plate divergence introduces a fast rift phase. Plate acceleration takes place before continental rupture and considerable margin area is created during each phase. We reproduce the rapid transition from slow to fast extension using analytical and numerical modelling with constant force boundary conditions. The extension models suggest that the two-phase velocity behaviour is caused by a rift-intrinsic strength-velocity feedback, which can be robustly inferred for diverse lithosphere configurations and rheologies. Our results explain differences between proximal and distal margin areas3 and demonstrate that abrupt plate acceleration during continental rifting is controlled by the nonlinear decay of the resistive rift strength force. This mechanism provides an explanation for several previously unexplained rapid absolute plate motion changes, offering new insights into the balance of plate driving forces through time.
Earth and Planetary Science Letters, Vol. 435, 1, pp. 31-35.
Russia
Deposit - Udachnaya
Abstract: The study of diamond and its solid inclusions is of paramount importance to acquire direct information on the deepest regions of the Earth. However, although diamond is one of the most studied materials in geology, the diamond-inclusion relationships are not yet understood: do they form simultaneously (syngenesis) or are inclusions pre-existing objects on which diamond nucleated (protogenesis)? Here we report, for the first time, adhesion energies between diamond (D) and forsterite (Fo) to provide a crucial contribution to the syngenesis/protogenesis debate. The following interfaces were investigated at quantum-mechanical level: (i) (001)D/(001)Fo, (ii) (001)D/(021)Fo, and (iii) (111)D/(001)Fo. Our data, along with the ones recently obtained on the (110)D/(101)Fo interface, revealed an unexpected thermodynamic behaviour, all interfaces showing almost equal and low adhesion energies: accordingly, diamond and olivine have an extremely low chemical affinity and cannot develop preferential orientations, even during an eventual epitaxial growth. Combining these results with those of our previous work concerning the morphology constraints of diamond on its inclusions, we can state that the two main arguments used so far in favour of diamond/inclusions syngenesis cannot be longer considered valid, at least for olivine.
Doklady Earth Sciences, Vol. 466, 2, Feb. pp. 135-137.
Russia
Carbonatite
Abstract: The first data on variations of the isotope composition and element ratios of carbon, nitrogen, and argon in carbonatites of different generations and ultrabasic rocks of the Guli massif obtained by the method of step crushing are reported. It is shown that early carbonatite differs significantly from the later ones by the concentration of highly volatile components, as well as by the isotope compositions of carbon (CO2), argon, and hydrogen (H2O). The data obtained allow us to conclude that the mantle component predominated in the fluid at the early stages of formation of rocks of the Guli massif, whereas the late stages of carbonatite formation were characterized by an additional fluid source, which introduced atmospheric argon, and most likely a high portion of carbon dioxide with isotopically heavy carbon.
Journal of Mining Science, Vol. 51, 4, pp. 799-810.
Russia
Spectroscopy
Abstract: Using the Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), microscopy and microhardness test methods, the change in the crystalline and chemical properties and in microhardness of rock-forming minerals of kimberlites as a result of exposure to high-power nanosecond electromagnetic pulses (HPEM) has been studied. From FTIR and XPS data the non-thermal effect of HPEM results in damage of surface microstructure of dielectric minerals due to formation of microcracks, surface breakdowns and other defects, which ensure effective weakening of rock-forming minerals and reduction in their microhardness by 40-66%.
Abstract: In the upper mantle, diamonds can potentially grow from various forms of media (solid, gas, fluid) with a range of compositions (e.g. graphite, C-O-H fluids, silicate or carbonate melts). Inclusions trapped in diamonds are one of the few diagnostic tools that can constrain diamond growth conditions in the Earth's mantle. In this study, inclusion-bearing diamonds have been synthesized to understand the growth conditions of natural diamonds in the upper mantle. Diamonds containing syngenetic inclusions were synthesized in multi-anvil presses employing starting mixtures of carbonates, and silicate compositions in the presence of pure water and saline fluids (H2O-NaCl). Experiments were performed at conditions compatible with the Earth's geotherm (7 GPa, 1300-1400 °C). Results show that within the timescale of the experiments (6 to 30 h) diamond growth occurs if water and carbonates are present in the fluid phase. Water promotes faster diamond growth (up to 14 mm/year at 1400 °C, 7 GPa, 10 g/l NaCl), which is favorable to the inclusion trapping process. At 7 GPa, temperature and fluid composition are the main factors controlling diamond growth. In these experiments, diamonds grew in the presence of two fluids: an aqueous fluid and a hydrous silicate melt. The carbon source for diamond growth must be carbonate (CO32) dissolved in the melt or carbon dioxide species in the aqueous fluid (CO2aq). The presence of NaCl affects the growth kinetics but is not a prerequisite for inclusion-bearing diamond formation. The presence of small discrete or isolated volumes of water-rich fluids is necessary to grow inclusion-bearing peridotitic, eclogitic, fibrous, cloudy and coated diamonds, and may also be involved in the growth of ultradeep, ultrahigh-pressure metamorphic diamonds.
Abstract: Diamonds from the Machado River alluvial deposit have been characterised on the basis of external morphology, internal textures, carbon isotopic composition, nitrogen concentration and aggregation state and mineral inclusion chemistry. Variations in morphology and features of abrasion suggest some diamonds have been derived directly from local kimberlites, whereas others have been through extensive sedimentary recycling. On the basis of mineral inclusion compositions, both lithospheric and sublithospheric diamonds are present at the deposit. The lithospheric diamonds have clear layer-by-layer octahedral and/or cuboid internal growth zonation, contain measurable nitrogen and indicate a heterogeneous lithospheric mantle beneath the region. The sublithospheric diamonds show a lack of regular sharp zonation, do not contain detectable nitrogen, are isotopically heavy (?13CPDB predominantly ? 0.7 to ? 5.5) and contain inclusions of ferropericlase, former bridgmanite, majoritic garnet and former CaSiO3-perovskite. This suggests source lithologies that are Mg- and Ca-rich, probably including carbonates and serpentinites, subducted to lower mantle depths. The studied suite of sublithospheric diamonds has many similarities to the alluvial diamonds from Kankan, Guinea, but has more extreme variations in mineral inclusion chemistry. Of all superdeep diamond suites yet discovered, Machado River represents an end-member in terms of either the compositional range of materials being subducted to Transition Zone and lower mantle or the process by which materials are transferred from the subducted slab to the diamond-forming region.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 12p.
Africa, South Africa
Deposit - Venetia
Abstract: The nature of diamond deposits are such that most mineral resource reporting codes contain a sub-section unique to diamond estimation and classification. These codes identify a number of criteria which define the uniqueness of diamond deposits, including, the low and variable grade of diamond deposits; the particulate nature of diamonds which affects both size and revenue of individual particles and finally the inherent difficulties and uncertainties in the estimation of diamond resources. These criteria are expanded on to provide an overview of the estimation of kimberlite diamond deposits. Placer deposits have been excluded as they constitute a particularly complex example of particulate distributions. Diamond grade, typically of the order of parts per million (ppm), is dependent on the number of stones per unit volume or mass as well as the diamond size distribution while diamond revenue is dependent on size, model, colour and quality. These parameters of a discrete particle result in a conmlOdily which requires some unique estimation and modelling methodologies. For most commodities "grade" is a measure of concentration and is directly proportional to value. [n the case of diamonds however the same stone grade (e.g. stones per 100 tonnes) may have significantly different carat grades and revenue, depending on the characteristics of the individual stones (size, model, colour and quality). The De _Beers Consolidated Mines Venetia Mine is used as an example of diamond eslimation as well as to highlighl some propriety grade eslimation techniques. The mine has been sampled for grade using a number of different sample supports, from 36" diameter reverse circulation drillholes to micro diamond core drilling. De Beers Group Services (Ply) Lld (DBGS) have developed a technique of mixed (or multiple) support kriging which allows for the combination of samples of different sizes (and therefore grade distributions) in the estimation process. In addition DBGS have researched techniques of both global and local grade estimation using micro diamonds. The estimation of kimberlite diamond deposits has a number of unique components resulting from the discrete nature of the diamond distribution. It is however equally fundamentally important to understand exactly what the sampling data represents; the constraints Wlder which the data were coUected (e.g. bottom cut ofJ) and the adjustments necessary to ensure parity Page 73 The Southern African Institute of Mining and Metallurgy Diamonds - Source to Use 2010 DBush between and within sampling programmes as well as the likely metallurgical process III a production environment.
Bussweiler, Y., Pearson, D.G., Luth, R.W., Kjarsgaard, B.A., Stachel, T.
The evolution of calcite-bearing kimberlite by rock-melt reaction during ascent - evidence from polymineralic inclusions within Cr- diopside and Cr-pyrope megacrysts from Lac de Gras kimberlites, Northwest Territories, Canada.
GAC MAC Meeting Special Session SS11: Cratons, kimberlites and diamonds., abstract 1/4p.
Contributions to Mineralogy and Petrology, Vol. 171, 7, 25p.
Canada, Northwest Territories
Deposit - Lac de Gras arena
Abstract: Megacrystic (>1 cm) clinopyroxene (Cr-diopside) and garnet (Cr-pyrope) xenocrysts within kimberlites from Lac de Gras (Northwest Territories, Canada) contain fully crystallized melt inclusions. These ‘polymineralic inclusions’ have previously been interpreted to form by necking down of melts at mantle depths. We present a detailed petrographical and geochemical investigation of polymineralic inclusions and their host crystals to better understand how they form and what they reveal about the evolution of kimberlite melt. Genetically, the megacrysts are mantle xenocrysts with peridotitic chemical signatures indicating an origin within the lithospheric mantle (for the Cr-diopsides studied here ~4.6 GPa, 1015 °C). Textural evidence for disequilibrium between the host crystals and their polymineralic inclusions (spongy rims in Cr-diopside, kelyphite in Cr-pyrope) is consistent with measured Sr isotopic disequilibrium. The preservation of disequilibrium establishes a temporal link to kimberlite eruption. In Cr-diopsides, polymineralic inclusions contain phlogopite, olivine, chromite, serpentine, and calcite. Abundant fluid inclusion trails surround the inclusions. In Cr-pyropes, the inclusions additionally contain Al-spinel, clinopyroxene, and dolomite. The major and trace element compositions of the inclusion phases are generally consistent with the early stages of kimberlite differentiation trends. Extensive chemical exchange between the host phases and the inclusions is indicated by enrichment of the inclusions in major components of the host crystals, such as Cr2O3 and Al2O3. This chemical evidence, along with phase equilibria constraints, supports the proposal that the inclusions within Cr-diopside record the decarbonation reaction: dolomitic melt + diopside ? forsterite + calcite + CO2, yielding the observed inclusion mineralogy and producing associated (CO2-rich) fluid inclusions. Our study of polymineralic inclusions in megacrysts provides clear mineralogical and chemical evidence for an origin of kimberlite that involves the reaction of high-pressure dolomitic melt with diopside-bearing mantle assemblages producing a lower-pressure melt that crystallizes a calcite-dominated assemblage in the crust.
Contributions to Mineralogy and Petrology, in press available 25p.
Canada, Northwest Territories
Deposit - Lac de Gras
Abstract: Megacrystic (>1 cm) clinopyroxene (Cr-diopside) and garnet (Cr-pyrope) xenocrysts within kimberlites from Lac de Gras (Northwest Territories, Canada) contain fully crystallized melt inclusions. These ‘polymineralic inclusions’ have previously been interpreted to form by necking down of melts at mantle depths. We present a detailed petrographical and geochemical investigation of polymineralic inclusions and their host crystals to better understand how they form and what they reveal about the evolution of kimberlite melt. Genetically, the megacrysts are mantle xenocrysts with peridotitic chemical signatures indicating an origin within the lithospheric mantle (for the Cr-diopsides studied here ~4.6 GPa, 1015 °C). Textural evidence for disequilibrium between the host crystals and their polymineralic inclusions (spongy rims in Cr-diopside, kelyphite in Cr-pyrope) is consistent with measured Sr isotopic disequilibrium. The preservation of disequilibrium establishes a temporal link to kimberlite eruption. In Cr-diopsides, polymineralic inclusions contain phlogopite, olivine, chromite, serpentine, and calcite. Abundant fluid inclusion trails surround the inclusions. In Cr-pyropes, the inclusions additionally contain Al-spinel, clinopyroxene, and dolomite. The major and trace element compositions of the inclusion phases are generally consistent with the early stages of kimberlite differentiation trends. Extensive chemical exchange between the host phases and the inclusions is indicated by enrichment of the inclusions in major components of the host crystals, such as Cr2O3 and Al2O3. This chemical evidence, along with phase equilibria constraints, supports the proposal that the inclusions within Cr-diopside record the decarbonation reaction: dolomitic melt + diopside ? forsterite + calcite + CO2, yielding the observed inclusion mineralogy and producing associated (CO2-rich) fluid inclusions. Our study of polymineralic inclusions in megacrysts provides clear mineralogical and chemical evidence for an origin of kimberlite that involves the reaction of high-pressure dolomitic melt with diopside-bearing mantle assemblages producing a lower-pressure melt that crystallizes a calcite-dominated assemblage in the crust.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, 10, pp. 3343-3361.
United States
Geophysics - seismics
Abstract: Teleseismic P wave amplitude spectra from deep earthquakes recorded by USArray are inverted for maps of upper mantle ?t* for multiple frequency bands within 0.08-2 Hz. All frequency bands show high ?t* regions in the southwestern U.S., southern Rocky Mountains, and Appalachian margin. Low ?t* is more common across the cratonic interior. Inversions with narrower frequency bands yield similar patterns, but greater ?t* magnitudes. Even the two standard deviation ?t* magnitude for the widest band is ?2-7 times greater than predicted by global QS tomography or an anelastic olivine thermal model, suggesting that much of the ?t* signal is nonthermal in origin. Nonthermal contributions are further indicated by only a moderate correlation between ?t* and P travel times. Some geographic variations, such as high ?t* in parts of the cratonic interior with high mantle velocities and low heat flow, demonstrate that the influence of temperature is regionally overwhelmed. Transverse spectra are used to investigate the importance of scattering because they would receive no P energy in the absence of 3-D heterogeneity or anisotropy. Transverse to vertical (T/Z) spectral ratios for stations with high ?t* are higher and exhibit steeper increases with frequency compared to T/Z spectra for low ?t* stations. The large magnitude of ?t* estimates and the T/Z spectra are consistent with major contributions to ?t* from scattering. A weak positive correlation between intrinsic attenuation and apparent attenuation due to scattering may contribute to ?t* magnitude and the moderate correlation of ?t* with travel times.
Earth and Planetary Science Letters, Vol. 435, 1, pp. 55-63.
Mantle
Plume
Abstract: In order to link the geochemical signature of hot spot basalts to Earth's deep interior, it is first necessary to understand how plumes sample different regions of the mantle. Here, we investigate the relative amounts of deep and shallow mantle material that are entrained by an ascending plume and constrain its source region. The plumes are generated in a viscous syrup using an isolated heater for a range of Rayleigh numbers. The velocity fields are measured using stereoscopic Particle-Image Velocimetry, and the concept of the ‘vortex ring bubble’ is used to provide an objective definition of the plume geometry. Using this plume geometry, the plume composition can be analysed in terms of the proportion of material that has been entrained from different depths. We show that the plume composition can be well described using a simple empirical relationship, which depends only on a single parameter, the sampling coefficient, scsc. High-scsc plumes are composed of material which originated from very deep in the fluid domain, while low-scsc plumes contain material entrained from a range of depths. The analysis is also used to show that the geometry of the plume can be described using a similarity solution, in agreement with previous studies. Finally, numerical simulations are used to vary both the Rayleigh number and viscosity contrast independently. The simulations allow us to predict the value of the sampling coefficient for mantle plumes; we find that as a plume reaches the lithosphere, 90% of its composition has been derived from the lowermost 260–750 km in the mantle, and negligible amounts are derived from the shallow half of the lower mantle. This result implies that isotope geochemistry cannot provide direct information about this unsampled region, and that the various known geochemical reservoirs must lie in the deepest few hundred kilometres of the mantle.
Abstract: Kevin Heather’s (SEG 1998 F) presentation at the September 2015 Chile- Explore Congress, entitled “The Lost Art of Geological Mapping: Should We Care?,” regrettably came as no surprise to me, although I have to admit to being more than a little disappointed. Most senior explorationists, I suspect, would probably share these sentiments. Geological mapping is, after all, the very embodiment of all the basic field skills we learn as geologists, and the simple fact is that the alarm bells have been sounding loudly for some time now in our industry: basic field geological skills have been lost in the emerging generation of exploration geologists. As a geologist with some 30 years of experience in the exploration and mining industry, almost entirely in a fieldbased technical capacity, I have always maintained that careful geological mapping, based on sound observation, is one of the cornerstones of successful exploration. Indeed, given that our industry is founded on combinations of fortuitous geological phenomena in a complex framework, why would geological mapping and field geology not be positioned at the very forefront the discovery process? A large part of the debate as to the underlying causes for the general demise of geological field skills has focused on issues at the university level (e.g., fieldwork reduction due to funding cuts and increased liability, changes in undergraduate curricula to more closely reflect the broadening range of geological disciplines to serve wider needs of society, an emphasis on rapidly publishable experimental and modeling research at the expense of more costly field-based studies, etc.). The mining industry has responded by promoting its specific technical and skill set requirements at university level via collaborative research, student training initiatives, and funding programs. The focus of this Views contribution is to examine several internal industry issues which I believe have contributed to falling standards of geological fieldwork, and which have become apparent to me during extensive time spent in the field in a consulting capacity for numerous major, mid-tier, and junior companies.
Earth and Planetary Science Letters, Vol. 449, pp. 164-175.
United States, Canada
Geophysics - seismics
Abstract: We estimate crustal and uppermost mantle shear velocity structure beneath 30 stations in North America by jointly inverting the high frequency scattered wavefield observed in the P wave coda, together with long period surface wave phase and group dispersion data. Several features distinguish our approach from previous such joint inversions. 1) We apply a cross-convolution method, rather than more standard deconvolution approaches used in receiver function studies, and consider both Love and Rayleigh wave dispersion, allowing us to infer profiles of radial anisotropy. 2) We generate probabilistic 1D radially anisotropic depth profiles across the whole uppermost mantle, down to ?350 km depth. 3) The inverse problem is cast in a trans-dimensional Bayesian formalism, where the number of isotropic and anisotropic layers is treated as unknown, allowing us to obtain models described with the least number of parameters. Results show that the tectonically active region west of the Rocky Mountain Front is marked by a Lithospheric Asthenosphere Boundary and a Lehmann Discontinuity occurring at relatively shallow depths (60-150 km and 100-200 km, respectively), whereas further east, in the stable craton, these discontinuities are deeper (170-200 km and 200-250 km, respectively). In addition, in the stable part of the continent, at least two Mid-Lithospheric Discontinuities are present at intermediate depths, suggesting the existence of strong lithospheric layering, and a mechanism for lithospheric thickening by underplating of additional layers as cratonic age increases. The Moho across the continent as well as mid-crustal discontinuities in the craton are also imaged, in agreement with independent studies.
Abstract: Detailed textural and mineral chemistry characterisation of lamproites from the Socovos fault zone, SE Spain Neogene Volcanic Province (NVP) combining X-ray element maps and LA-ICP-MS spot analyses has provided valuable information about mantle depth ultrapotassic magma mixing processes. Despite having similar whole-rock compositions, rocks emplaced in the Socovos fault are mineralogically varied: including type-A olivine-phlogopite lamproites; and type-B clinopyroxene-phlogopite lamproites. The Ol-lacking type-B predates Ol-bearing type-A by c. 2 million years. We propose that the mineralogical variations, which are representative of lamproites in the NVP as a whole, indicate mantle source heterogeneities. Major and trace element compositions of mineral phases suggest both metasomatised harzburgite and veined pyroxenite sources that were most likely closely spatially related. Thin section scale textural and compositional variations in mineral phases reveal heterogeneous mantle- and primitive magma-derived crystals. The variety of crystals points to interaction and mingling-mixing of ultrapotassic magma batches at mantle depths prior crustal emplacement. The mixing apparently occurred in a mantle melting zone with a channelised flow regime and localised magma chambers-reservoirs. Magma interaction was interrupted when the Socovos and other lithosphere-scale faults tore down to the mantle source region, triggering rapid ascent of the heterogeneous lamproite magma.
Geochemistry: Exploration, Environment, Analysis, Vol. 16, 3-4, pp. 193-212.
Canada, Ontario
Alkalic
Abstract: Mineral exploration is increasingly taking advantage of real time techniques that dramatically reduce the costs and time taken to obtain results compared to traditional analytical methods. Portable X-ray fluorescence (pXRF) is now a well-established technique that is used to acquire lithogeochemical data. To date, however, benchtop scanning electron microscopes, equipped with energy dispersive systems (bSEM-EDS) have received little attention as a possible mineral exploration tool. This study examines the utility of combining pXRF and bSEM-EDS to characterize the igneous stratigraphy and its relationship to Cu-Pd mineralization in a drill hole at the Four Dams occurrence, located within the Eastern Gabbro assemblage of the Coldwell Alkaline Complex, Canada. The first part of this study compares field portable and laboratory techniques. Seventy-two powdered samples analysed by pXRF are compared with traditional major elements analysed by inductively coupled atomic emission spectroscopy (ICP-AES) and trace elements by inductively coupled plasma spectrometry (ICP-MS), and the compositions of 128 olivine, clinopyroxene and plagioclase grains analysed by bSEM-EDS are compared with traditional electron microprobe data. Our results show that each portable technique yields results similar to their lab-based counterparts within the analytical capabilities and precisions of the respective instruments. The second part presents a case study for the application of pXRF and bSEM-EDS to resolve questions related to igneous stratigraphy as an aid to mineral exploration in a complicated geological setting. A major problem for Cu-Pd exploration in the Coldwell Complex of NW Ontario is that the oxide-rich units that host Cu-Pd mineralization in the Marathon Series are petrographically similar to the barren oxide-rich units in the Layered Series. However, the mineralized units are geochemically distinctive. Our results show that the mineralized Marathon Series can be distinguished from the barren Layered Series, including oxide-rich units of both, by combinations of P2O5, Ba, Zr and V/Ti values, determined by pXRF, combined with plagioclase, olivine or clinopyroxene compositions measured by bSEM-EDS. The combination of pXRF and bSEM-EDS thus shows considerable promise as an exploration technique.
Abstract: In the Kay?köy area of Isparta-Gölcük district, Inner Isparta Angle, SW Anatolia, Turkey, a small volume of newly discovered K-rich mafic potassic magma was emplaced in the form of dome in the vicinity of graben structures under Pliocene (3.68 ± 0.5 Ma) extensional tectonics. Kay?köy leucite ankaratrites are made up of abundant diopside, barian phlogopite and leucite, and lesser olivine, that rarely contains Cr-spinel, nepheline and haüyne, with abundant magnetite. They have low SiO2 (44.00-46.04 wt.%) and Al2O3 (12.10-12.64 wt.%) with high K2O (4.00-4.42 wt.%), CaO (13.50-14.40 wt.%) and MgO (8.52-9.36 wt.%), with high Cr (397-547 ppm) and moderate Ni (57-74 ppm) contents. They represent the less evolved silica-undersaturated mafic potassic magmas within the Isparta-Gölcük volcanic province, and may be considered another parental source to the wide spectrum of the K-rich rocks. They are highly enriched in most of the incompatible elements (e.g., Ba, 2761 to > 10,000 ppm; Sr, 3700-4074 ppm; Th, 33.60-36.99 ppm; Zr, 274-321 ppm) with high LREEs, low HREEs and elevated LREEs/HREEs ratios [(La/Yb)N, 73-80] and are comparable with kamafugite and carbonatites. Trace element patterns have negative P, Ti and Nb-Ta anomalies in common with the Italian kamafugite province and lack of a Eu anomaly, in contrast to the negative Eu anomaly of the Italian province. Their Sr87/86-Nd143/144 (0.703877-0.512765) isotopic compositions, together with those of other potassic volcanics from the Inner Isparta Angle, coincide with the West Quinling (China) kamafugites with highly depleted mantle signatures, and young East African carbonatites. Olivine-Cr-spinel pairs, high Mg# (0.69-0.73) numbers and Cr values, and high incompatible and LREE contents in Kay?köy leucite ankaratritic magma are consistent with near-primary magmas equilibrated with enriched and heterogeneous (peridotitic/pyroxenitic) mantle sources. On the basis of (i) their geochemical signatures [low Ti/Eu, elevated CaO/Al2O3 and (La/Yb)N ratios], (ii) consistency of parental magma compositions with experimental melt compositions for carbonated peridotites, and (iii) geochemical and isotopic affinities to kamafugites and carbonatites, it is inferred that the carbonatitic melts infiltrated the mantle sources of Kay?köy leucite ankaratritic magma, and induced the depletion of its SiO2 contents. Carbonate-bearing phonolitic parental melts formed by mixing of both silicate and carbonate-asthenospheric melts from convecting mantle, react with wall-rock peridotite to form diopside + phlogopite + olivine + apatite metasomatic veins as wehrlitic metasomes. Partial melting of such newly generated wehrlitic metasomes in the subcontinental lithospheric mantle resulted in the parental melts of Kay?köy leucite ankaratrites. Results also imply that the nature and composition of asthenosphere-derived silicate melts (basanitic, phonolitic or tephriphonolitic in composition) and percentage of mixed carbonatitic melts lead to the formation of discrete mantle metasomes within the Inner Isparta Angle lithospheric mantle. These metasomes are conducive to the generation of coeval potassic magmas with contrasting geochemical signatures (e.g., lamproitic, lamprophyric, kamafugitic) in a single tectonic setting.
Abstract: Since the end of World War II, there have been 259 armed conflicts in 159 locations (1). Sierra Leone's civil war began 25 years ago, at a time when roughly 25% of all countries worldwide were experiencing civil war (2). How can individuals and groups recover from such violent conflicts? On page 787 of this issue, Cilliers et al. (3) provide rigorous evidence on the efficacy of one postwar reconciliation strategy that was implemented in 100 communities in Sierra Leone (4).
Abstract: Perovskite (CaTiO3) has become a very usefulmineral for dating kimberlite eruptions, aswell as for constraining the compositional evolution of a kimberlitic magma and its source. Despite the undeniable potential of such an approach, no similar study had been done in Angola, the fourth largest diamond producer in Africa. Here we present the firstwork of in situ U-Pb geochronology and Sr-Ndisotope analyses of perovskite in six Angolan kimberlites, supported by a detailed petrographic and geochemical study of their perovskite populations. Four types of perovskitewere identified, differing in texture,major- and trace-element composition, zoning patterns, type of alteration and the presence or absence of inclusions. Primary groundmass perovskite is classified either as anhedral, Na-, Nb- and LREE-poor perovskite (Ia); or euhedral, strongly zoned, Na-, Nb- and LREE-rich perovskite (Ib). Secondary perovskite occurs as reaction rims on ilmenite (IIa) or as high Nb (up to 10.6 wt% Nb2O5) perovskite rims on primary perovskite (IIb). The occurrence of these four types within the Mulepe kimberlites is interpreted as an evidence of a complex, multi-stage process that involved mingling of compositionally different melts. U-Pb dating of these perovskites yielded Lower Cretaceous ages for four of the studied kimberlites: Mulepe 1 (116.2±6.5Ma),Mulepe 2 (123.0±3.6Ma), Calonda (119.5±4.3 Ma) and Cat115 (133±10Ma). Kimberlite magmatism occurred in NE Angola likely due to reactivation of deep-seated translithospheric faults (N300 km) during the break-up of Gondwana. Sr-Nd isotope analyses of four of these kimberlites indicate that they are Group I kimberlites, which is consistent with the petrological observations.
Abstract: Perovskite (CaTiO3) has become a very useful mineral for dating kimberlite eruptions, as well as for constraining the compositional evolution of a kimberlitic magma and its source. Despite the undeniable potential of such an approach, no similar study had been done in Angola, the fourth largest diamond producer in Africa. Here we present the first work of in situ U-Pb geochronology and Sr-Nd isotope analyses of perovskite in six Angolan kimberlites, supported by a detailed petrographic and geochemical study of their perovskite populations. Four types of perovskite were identified, differing in texture, major- and trace-element composition, zoning patterns, type of alteration and the presence or absence of inclusions. Primary groundmass perovskite is classified either as anhedral, Na-, Nb- and LREE-poor perovskite (Ia); or euhedral, strongly zoned, Na-, Nb- and LREE-rich perovskite (Ib). Secondary perovskite occurs as reaction rims on ilmenite (IIa) or as high Nb (up to 10.6 wt% Nb2O5) perovskite rims on primary perovskite (IIb). The occurrence of these four types within the Mulepe kimberlites is interpreted as an evidence of a complex, multi-stage process that involved mingling of compositionally different melts. U-Pb dating of these perovskites yielded Lower Cretaceous ages for four of the studied kimberlites: Mulepe 1 (116.2 ± 6.5 Ma), Mulepe 2 (123.0 ± 3.6 Ma), Calonda (119.5 ± 4.3 Ma) and Cat115 (133 ± 10 Ma). Kimberlite magmatism occurred in NE Angola likely due to reactivation of deep-seated translithospheric faults (> 300 km) during the break-up of Gondwana. Sr-Nd isotope analyses of four of these kimberlites indicate that they are Group I kimberlites, which is consistent with the petrological observations.
Abstract: The presence of melt during deformation produces a drastic change in the rheological behavior of the continental crust; rock strength is decreased even for melt fractions as low as ?7%. At pressure/temperature conditions typical of the middle to lower crust, melt-bearing systems may play a critical role in the process of strain localization and in the overall strength of the continental lithosphere. In this contribution we focus on the role and dynamics of melt flow in two different mid-crustal settings formed during the Brasiliano orogeny: (i) a large-scale anatectic layer in an orthogonal collision belt, represented by the Carlos Chagas anatexite in southeastern Brazil, and (ii) a strike-slip setting, in which the Espinho Branco anatexite in the Patos shear zone (northeast Brazil) serves as an analogue. Both settings, located in eastern Brazil, are part of the Neoproterozoic tectonics that resulted in widespread partial melting, shear zone development and the exhumation of middle to lower crustal layers. These layers consist of compositionally heterogeneous anatexites, with variable former melt fractions and leucosome structures. The leucosomes usually form thick interconnected networks of magma that reflect a high melt content (>30%) during deformation. From a comparison of previous work based on detailed petrostructural and AMS studies of the anatexites exposed in these areas, we discuss the rheological implications caused by the accumulation of a large volume of melt “trapped” in mid-crustal levels, and by the efficient melt extraction along steep shear zones. Our analyses suggest that rocks undergoing partial melting along shear settings exhibit layers with contrasting competence, implying successive periods of weakening and strengthening. In contrast, regions where a large amount of magma accumulates lack clear evidence of competence contrast between layers, indicating that they experienced only one major stage of dramatic strength drop. This comparative analysis also suggests that the middle part of both belts contained large volumes of migmatites, attesting that the orogenic root was partially molten and encompassed more than 30% of granitic melt at the time of deformation.
Earth and Planetary Science Letters, Vol. 449, pp. 118-126.
Gondwana, Rodinia
Subduction
Abstract: Periodic assembly and dispersal of continental fragments has been a characteristic of the solid Earth for much of its history. Geodynamic drivers of this cyclic activity are inferred to be either top-down processes related to near surface lithospheric stresses at plate boundaries or bottom-up processes related to mantle convection and, in particular, mantle plumes, or some combination of the two. Analysis of the geological history of Rodinian crustal blocks suggests that internal rifting and breakup of the supercontinent were linked to the initiation of subduction and development of accretionary orogens around its periphery. Thus, breakup was a top-down instigated process. The locus of convergence was initially around north-eastern and northern Laurentia in the early Neoproterozoic before extending to outboard of Amazonia and Africa, including Avalonia-Cadomia, and arcs outboard of Siberia and eastern to northern Baltica in the mid-Neoproterozoic (?760 Ma). The duration of subduction around the periphery of Rodinia coincides with the interval of lithospheric extension within the supercontinent, including the opening of the proto-Pacific at ca. 760 Ma and the commencement of rifting in east Laurentia. Final development of passive margin successions around Laurentia, Baltica and Siberia was not completed until the late Neoproterozoic to early Paleozoic (ca. 570-530 Ma), which corresponds with the termination of convergent plate interactions that gave rise to Gondwana and the consequent relocation of subduction zones to the periphery of this supercontinent. The temporal link between external subduction and internal extension suggests that breakup was initiated by a top-down process driven by accretionary tectonics along the periphery of the supercontinent. Plume-related magmatism may be present at specific times and in specific places during breakup but is not the prime driving force. Comparison of the Rodinia record of continental assembly and dispersal with that for Nuna, Gondwana and Pangea suggests grouping into two supercycles in which Nuna and Gondwana underwent only partial or no break-up phase prior to their incorporation into Rodinia and Pangea respectively. It was only after this final phase of assembly that the supercontinents then underwent full dispersal.
Mineralogy and Petrology, in press available, 25p.
India
Lamproites - Nuapada field
Abstract: We report the mineralogy, bulk-rock geochemistry, 40Ar/39Ar (whole-rock) age and radiogenic (Sr and Nd) isotope composition of an ultrapotassic dyke from Sakri (Nuapada lamproite field) located at the tectonic contact between the easternmost margin of the Bastar craton and Eastern Ghats Mobile Belt, India. The Sakri dyke has a mineralogy which strongly resembles a lamproite sensu stricto (viz.,Ti-rich phlogopite, Na-poor diopside, Fe-rich sanidine, ulvospinel trend and Sr-rich apatite). However, its bulk-rock major element geochemical characteristics (viz., extreme silica-undersaturated nature) resemble sensu lato kamafugite from Toro Ankole, Uganda, East African Rift, and Alto Paranaiba Province, Brazil. The Sakri dyke also displays certain compositional peculiarities (viz., high degree of evolution of mica composition from phlogopite to biotite, elevated titanium and aluminum in clinopyroxene and significantly lower bulk Mg#) when compared to the ultrapotassic rocks from various Indian cratons. 40Ar/39Ar dating gave a plateau age of 1045?±?9 Ma which is broadly similar to that of other Mesoproterozoic (i) lamproites from the Bastar and Bundelkhand cratons, and (ii) kimberlites from the Eastern Dharwar craton. Initial bulk-rock Sr (0.705865-0.709024) and Nd (0.511063-0.511154) isotopic ratios reveal involvement of an ‘enriched’ source region with long-term incompatible element enrichment and a depleted mantle (TDM) Nd model age of 2.56 Ga straddling the Archaean-Proterozoic chronostratigraphic boundary. The bulk-rock incompatible trace element ratios (Ta/Yb, Th/Yb, Rb/Ba and Ce/Y) of the Sakri ultrapotassic dyke negate any significant influence of crustal contamination. Small-degree melting (1 to 1.5 %) of a mixed garnet-facies and spinel-facies phlogopite lherzolite can account for its observed REE concentrations. Whereas the emplacement of the Sakri ultrapotassic dyke is related to the amalgamation of the supercontinent of Rodinia, its overlapping geochemical characteristics of lamproite and kamafugite (also displayed by two other lamproites of the Nuapada field at Amlidadar and Parkom) are linked to the emplacement in a unique geological setting at the craton-mobile belt contact and hence of geodynamic significance.
Mineralogy and Petrology, in press available, 25p.
India
Deposit - Sakri Nuapada
Abstract: We report the mineralogy, bulk-rock geochemistry, 40Ar/39Ar (whole-rock) age and radiogenic (Sr and Nd) isotope composition of an ultrapotassic dyke from Sakri (Nuapada lamproite field) located at the tectonic contact between the easternmost margin of the Bastar craton and Eastern Ghats Mobile Belt, India. The Sakri dyke has a mineralogy which strongly resembles a lamproite sensu stricto (viz.,Ti-rich phlogopite, Na-poor diopside, Fe-rich sanidine, ulvospinel trend and Sr-rich apatite). However, its bulk-rock major element geochemical characteristics (viz., extreme silica-undersaturated nature) resemble sensu lato kamafugite from Toro Ankole, Uganda, East African Rift, and Alto Paranaiba Province, Brazil. The Sakri dyke also displays certain compositional peculiarities (viz., high degree of evolution of mica composition from phlogopite to biotite, elevated titanium and aluminum in clinopyroxene and significantly lower bulk Mg#) when compared to the ultrapotassic rocks from various Indian cratons. 40Ar/39Ar dating gave a plateau age of 1045?±?9 Ma which is broadly similar to that of other Mesoproterozoic (i) lamproites from the Bastar and Bundelkhand cratons, and (ii) kimberlites from the Eastern Dharwar craton. Initial bulk-rock Sr (0.705865-0.709024) and Nd (0.511063-0.511154) isotopic ratios reveal involvement of an ‘enriched’ source region with long-term incompatible element enrichment and a depleted mantle (TDM) Nd model age of 2.56 Ga straddling the Archaean-Proterozoic chronostratigraphic boundary. The bulk-rock incompatible trace element ratios (Ta/Yb, Th/Yb, Rb/Ba and Ce/Y) of the Sakri ultrapotassic dyke negate any significant influence of crustal contamination. Small-degree melting (1 to 1.5 %) of a mixed garnet-facies and spinel-facies phlogopite lherzolite can account for its observed REE concentrations. Whereas the emplacement of the Sakri ultrapotassic dyke is related to the amalgamation of the supercontinent of Rodinia, its overlapping geochemical characteristics of lamproite and kamafugite (also displayed by two other lamproites of the Nuapada field at Amlidadar and Parkom) are linked to the emplacement in a unique geological setting at the craton-mobile belt contact and hence of geodynamic significance.
Abstract: We report groundmass perovskite U -Pb (SIMS) ages, perovskite Nd isotopic (LA-ICPMS) composition and bulk-rock geochemical data of the Timmasamudram diamondiferous kimberlite cluster, Wajrakarur kimberlite field, in the Eastern Dharwar craton of southern India. The kimberlite pipes gave similar Mesoproterozoic ages of 1086 ± 19 Ma (TK-1, microcrystic variant) and 1119 ± 12 Ma (TK-3). However, a perovskite population sampled from the macrocrystic variant of TK-1 gave a much younger Late Cretaceous age of ca. 90 Ma. This macrocrystic kimberlite phase intrudes the Mesoproterozoic microcrystic phase and has a distinct bulk-rock geochemistry. The Nd-isotope composition of the ~ 1100 Ma perovskites in the cluster show depleted ?Nd(T) values of 2.1 ± 0.6 to 6.7 ± 0.3 whereas the ~ 90 Ma perovskites have enriched ?Nd(T) values of ? 6.3 ± 1.3. The depleted-mantle (DM) model age of the Cretaceous perovskites is 1.2 Ga, whereas the DM model age of the Proterozoic perovskites is 1.2 to 1.5 Ga. Bulk-rock incompatible trace element ratios (La/Sm, Gd/Lu, La/Nb and Th/Nb) of all Timmasamudram kimberlites show strong affinity with those from the Cretaceous Group II kimberlites from the Bastar craton (India) and Kaapvaal craton (southern Africa). As the Late Cretaceous age of the younger perovskites from the TK-1 kimberlite is indistinguishable from that of the Marion hotspot-linked extrusive and intrusive igneous rocks from Madagascar and India, we infer that all may be part of a single Madagascar Large Igneous Province. Our finding constitutes the first report of Cretaceous kimberlite activity from southern India and has significant implications for its sub-continental lithospheric mantle evolution and diamond exploration programs.
Proceedings National Academy of Sciences India , Vol. 82, 3, July special issue pp. 515-536.
India
Kimberlites, lamproites
Abstract: Major highlights of researches carried out on kimberlites, lamproites, lamprophyres, carbonatites, other alkaline rocks and mafic dykes from the Indian shield during 2012-2016 are presented. New findings involving field mapping, petrology, geochemistry (including high quality mineral based in situ isotopic studies) and geophysics have provided remarkable insights on the mode of their occurrence, timing of emplacement, mineralogy and bulk-rock composition, redox conditions, relative contribution of the lithosphere and asthenosphere, as well as their economic potential. Several large-scale geodynamic aspects such as plume-lithosphere interactions, ancient subduction events, layered structure of the sub-continental lithospheric mantle, spatial extent of the Precambrian large igneous provinces and supercontinent configurations could be unraveled from these studies on deep-mantle derived small-volume magmatic rocks.
Acta Geologica Sinica, Vol. 90, July abstract p. 191.
India
Deposit - Lattavaram
Abstract: Utility of geochemistry in mineral exploration is known since more than half-a-century. In reconnaissance diamond exploration, regolith geochemistry is a well known tool worldwide and helps in distinguishing bedrock geology in hard rock terrains. More than 100 kimberlite pipes were discovered so far in the Eastern Dharwar Craton (EDC) of South India by various public and private organizations. Within the EDC, majority of diamondiferous pipe clusters occur in Anantapur District of Andhra Pradesh state in India. Lattavaram kimberlite cluster (LKC) is one among them in this district and four pipes in this cluster are reported to be diamondiferous along with two kimberlite bodies at Muligiripalli. The kimberlite pipes at Lattavaram occur in semi-circular shape whereas a kimberlite body exposed at Muligiripalli village occurs as a dyke within the granitoid country. The pipe 4 at Lattavaram exhibits conspicuous difference in the soil color and texture i.e., greenish color and mottled texture when compared with the reddish brown compact residual soils of granitic country rock. In the Indian context, soil regolith geochemistry is not a popular subject in search of kimberlites. It is observed that little or no literature is available on the utility of regolith geochemistry applied to kimberlite or diamond exploration in India. An attempt is made in this study, to demonstrate and understand the spatial surface geochemical signatures using residual soil geochemistry on known kimberlite pipes viz., 3 and 4 of LKC. Spatial and statistical analysis of trace and rare earth elements revealed that certain elements show predominance in the vicinity of the kimberlite pipes which can act as an exploration guide in distinguishing kimberlitic rocks within a granitoid country. These elements show distinct variation in their dispersion in the soil which can be attributed to basement lithology. It is observed that elements like Cr, Ni, Co, Cu, Nb, Zr, Ti, Ba and rare earth elements (REE) are significantly enriched in the mottled zone and calcretized duricrust relative to the country rock granitoids. A suite of trace elements comprising those associated with ultramafic rocks (Cr, Co & Ni) and felsic rocks (Nb, La, Sm and P) can readily distinguish the ultramafic/kimberlitic regolith from that derived from granitoid or felsic rocks which can be used as an exploration path finder.
Journal of Geophysical Research,, Vol. 120, 12, pp. 8259-8280.
Mantle
Ringwoodite
Abstract: Review of recent mineral physics literature shows consistent trends for the influence of Fe and H2O on the bulk modulus (K0) of wadsleyite and ringwoodite, the major phases of Earth's mantle transition zone (410-660?km). However, there is little consensus on the first pressure derivative, K0??=?(dK/dP)P=0, which ranges from about 4 to >5 across experimental studies and compositions. Here we demonstrate the importance of K0? in evaluating the bulk sound velocity of the transition zone in terms of water content and provide new constraints on the effect of H2O on K0? for wadsleyite and ringwoodite by conducting a comparative compressibility study. In the experiment, multiple crystals of hydrous Fo90 wadsleyite containing 2.0 and 0.25?wt?% H2O were loaded into the same diamond anvil cell, along with hydrous ringwoodite containing 1.4?wt?% H2O. By measuring their pressure-volume evolution simultaneously up to 32?GPa, we constrain the difference in K0? independent of the pressure scale, finding that H2O has no effect on K0?, whereas the effect of H2O on K0 is significant. The fitted K0? values of hydrous wadsleyite (0.25 and 2.0?wt?% H2O) and hydrous ringwoodite (1.4?wt?% H2O) examined in this study were found to be identical within uncertainty, with K0? ~3.7(2). New secondary-ion mass spectrometry measurements of the H2O content of these and previously investigated wadsleyite samples shows the bulk modulus of wadsleyite is reduced by 7.0(5)?GPa/wt?% H2O, independent of Fe content for upper mantle compositions. Because K0? is unaffected by H2O, the reduction of bulk sound velocity in very hydrous regions of transition zone is expected to be on the order of 1.6%, which is potentially detectible in high-resolution, regional seismology studies.
Journal of Mining Science , Vol. 51, 5, pp. 1235-1241.
Russia
Mineral processing ** in Russian
Abstract: The article presents new test results on structural and chemical properties of mineral formations on the surface of natural hydrophilic diamonds using Raman, X-ray phase and Auger spectroscopy methods. Analysis of morphological features of nano formations involved scanning electron microscope Jeol-5610 and analyzer INCA. Based on the studies into phase composition of diamonds non-recovered in the circuit of kimberlite ore processing, two types of mineral formations are discovered on their surface: microformations as silicate nature globules less than 1 ?m in size and silicate nano films more than 5 nm thick. The tests detect also presence of layered talc silicates that make diamond surface hydrophilic.
Abstract: 186Os/188Os variations in mantle peridotites provide constraints on the long-term Pt/Os evolution of the depleted mantle and the Pt/Os ratio of the primitive upper mantle (PUM). We report new 186Os/188Os data for mantle peridotites from continental (Rio Grande Rift and Colorado Plateau) and oceanic (Lena Trough and Hawaiian Islands) settings that span a wide range in fertility (Al2O3 ? 0.67-4.42 wt.%) and 187Os/188Os ratios (0.1138-0.1305). Although peridotite 186Os/188Os values span only a narrow range (from 0.1198345 to 0.1198384), 186Os/188Os broadly correlates with indices of melt depletion including bulk rock Al2O3, spinel Cr#, and clinopyroxene Cr#, consistent with Pt depletion in residual peridotites. PUM 186Os/188Os is estimated to be 0.1198378 ± 23 (2 SD) based on extrapolation of 186Os/188Os-fertility trends, which is very slightly lower than H-chondrites [? 0.1198398 ± 16 (2 SD); Brandon et al., 2006]. This value is consistent with a PUM Pt/Os of 1.7 ± 0.2, similar to average Pt/Os ratios of fertile continental peridotites. The inferred PUM Pt/Os is slightly lower than but within error of Pt/Os values measured in several classes of chondrites [Carbonaceous ? 1.8 ± 0.2, Ordinary ? 1.9 ± 0.1, and Enstatite ? 1.9 ± 0.1 (Brandon et al., 2006)] indicating that PUM Pt/Os is broadly chondritic. In contrast, estimates for PUM Ru/Ir and Pd/Ir (cf. Becker et al., 2006) are suprachondritic. The addition of a chondritic late veneer alone cannot create a combination of chondritic and suprachondritic HSE ratios for the PUM. Instead, minor core segregation occurring concurrently with the addition of a late veneer may explain the observed mantle HSE abundances and ratios. Combined 186Os/188Os-187Os/188Os isotopic and Pt/Os and Re/Os variability in peridotites suggest an average mantle homogenization timescale of ~ 1.2 Ga. In contrast, combined Hf-Nd isotopic and Lu/Hf and Sm/Nd variability in peridotites indicate much shorter homogenization timescales (< 0.4 Ga), potentially reflecting enhanced homogenization by melt-rock interaction to which the Pt-Os and Re-Os systems are relatively immune. The mechanical mixing timescale inferred from Os isotopes is consistent with timescales predicted for whole mantle convection.
Abstract: We estimate density and P-wave velocity perturbations in the mantle beneath the southeastern South America plate from geoid anomalies and P-wave traveltime residuals to constrain the structure of the lithosphere underneath the Paraná Magmatic Province (PMP) and conterminous geological provinces. Our analysis shows a consistent correlation between density and velocity anomalies. The P-wave speed and density are 1% and 15 kg/m3 lower, respectively, in the upper mantle under the Late Cretaceous to Cenozoic alkaline provinces, except beneath the Goiás Alkaline Province (GAP), where density (+20 kg/m3) and velocity (+0.5%) are relatively high. Underneath the PMP, the density is higher by about 50 kg/m3 in the north and 25 kg/m3 in the south, to a depth of 250???300 km. These values correlate with high-velocity perturbations of +0.5% and +0.3%, respectively. Profiles of density perturbation versus depth in the upper mantle are different for the PMP and the adjacent Archean São Francisco (SFC) and Amazonian (AC) cratons. The Paleoproterozoic PMP basement has a high-density root. The density is relatively low in the SFC and AC lithospheres. A reduction of density is a typical characteristic of chemically depleted Archean cratons. A more fertile Proterozoic and Phanerozoic subcontinental lithospheric mantle has a higher density, as deduced from density estimates of mantle xenoliths of different ages and composition. In conjunction with Re-Os isotopic studies of the PMP basalts, chemical and isotopic analyses of peridodite xenoliths from the GAP in the northern PMP, and electromagnetic induction experiments of the PMP lithosphere, our density and P-wave speed models suggest that the densification of the PMP lithosphere and flood basalt generation are related to mantle refertilization. Metasomatic refertilization resulted from the introduction of asthenospheric components from the mantle wedge above Proterozoic subduction zones, which surrounded the Paraná lithosphere. The high-density PMP lithosphere is presently gravitationally unstable and prone to delamination.
Abstract: Modern high-pressure experimental techniques have enabled us to achieve the pressure and temperature at the center of Earth (about 360 GPa and 6000 K) in laboratories. However, studies of rheological properties of minerals under controlled strain rate (creep experiments) have been limited to the pressure equivalent to that in Earth's transition zone, a depth only about one-tenth of Earth's radius. Determinations of rheological laws that govern the flows and viscosities of minerals in Earth's deep mantle have been far beyond our reach. In the absence of such critical data, the nature of mantle dynamics-such as whether the convection involves the entire lower mantle, yielding a chemically homogeneous deep mantle-remains controversial. Discovery of the breakdown of ringwoodite into the denser bridgmanite and magnesiowüstite phases at 24 GPa (1) removed the need for a major chemical discontinuity in Earth inferred from observations of a strong seismic reflector at 660 km depth. On page 144 of this issue, Girard et al. (2) report on the detailed rheological nature of this bridgmanite plus magnesiowüstite mineral aggregate, shedding more light on the mantle convection. The integration of brilliant synchrotron radiations and rotating apposed anvils enables creep experiments for large strain at pressures equivalent to that in Earth's lower mantle.
Journal of Geophysical Research, Vol. 120, 10, pp. 6993-7012.
Canada, Alberta
Geophysics - seismics LVZs
Abstract: Crustal low-velocity zones (LVZs) have been reported in active orogens such as the Himalayas and the Andes but rarely in stable cratonic regions. In this study, we provide compelling evidence for a significant midcrustal LVZ beneath eastern-central Alberta, an integral part of the Precambrian Canadian Shield covered by thick Phanerozoic sedimentary deposits. This 200?km wide, over 10?km thick midcrustal LVZ is well resolved by shear velocity inversions using P-to-S receiver functions from more than 4600 earthquakes. It is generally overlain by a high-velocity upper crust in the depth range of 8-15?km, especially in western-central Alberta, which coincides with the previously documented Winagami reflection sequence. We interpret the LVZ to be of granitic composition, potentially in connection with the crystallization of partially molten crust during the Paleoproterozoic eon. In addition to the Precambrian tectonic history of western Laurentia, which featured plate convergence conducive to crustal melting, our crustal model is further supported by (1) a moderate spatial correlation between the LVZ and heat flow, and (2) shear velocities consistent with that of granite. The well preserved Winagami reflection sequence and the LVZ are potential evidence of distinct episodes of magmatism and crust modification in the Precambrian basement of the Western Canada Sedimentary Basin. The existence of a broad crustal LVZ suggests extensive subduction, orogenesis, and crustal melting during the Precambrian assembly of the North American craton.
Earth and Planetary Science Letters, Vol. 441, pp. 200-210.
Mantle
Subduction
Abstract: Subduction zones are one of the most striking feature on Earth. They represent one of the two types of convergent plate boundaries, in which one tectonic plates sinks underneath another into the Earth’s mantle. Soon after the advent of the theory of plate tectonics scientists recognized that subduction zones are one of the main drivers of plate motion and mantle convection [Elsasser, 1971]. With trench motion during progressive subduction, overriding plates incorporated in subduction zones may follow the trench and/or deform internally. Such deformation is often characterized by backarc extension, which leads to opening of backarc basins, such as the Tyrrhenian Sea, the Scotia Sea, the Aegean Sea, the North Fiji Basin, and the Lau Basin.
European Journal of Mineralogy, Vol. 28, pp. 329-336.
Russia
Deposit - Udachnaya
Abstract: An experimental simulation of serpentine and chromite interaction was conducted at the pressure (P) and temperature (T) conditions of garnet-peridotite stability in order to clarify the potential role of serpentinite as a source for the crystallization of subcalcic garnet in the depleted subcratonic mantle. The experiments were performed at 4 GPa and 1100 C and 5.5 GPa and 1200 C using the high-pressure apparatus BARS. Natural antigorite from ophiolites of the Eastern Sayan (Russia) was used as a starting material. Two groups of chromite grains with different Cr# ¼ 100Cr/(Cr þ Al) ratios (from spinel peridotite xenoliths from the Udachnaya kimberlite pipe, Yakutia) were added to the antigorite. Newly formed garnet, spinel, olivine and orthopyroxene were observed as the products in the experiments. Garnet formed only around chromite grains with the lower Cr# value (46.4). Garnet has low CaO contents (,0.05 -1.10 wt.%) with chromium contents showing wide intra- and inter-grain variations (Cr# ¼ 0.7 -33.5). The Cr content increases from core to rim with the outer zones corresponding most closely to the equilibrium composition of the relevant bulk composition. The garnet total FeO content is in the range 3.4 -5.8 wt.%. The experiments demonstrate that serpentinite decomposed at a temperature of 700 C to olivine þ orthopyroxene þ water. If mingled mechanically with spinel-bearing mantlewedge peridotite upon subduction, it could react to form the range of subcalcic garnet compositions found as inclusions in diamonds.
Abstract: Using free-board modeling, we examine a vertically-averaged mantle density beneath the Archean-Proterozoic Siberian Craton in the layer from the Moho down to base of the chemical boundary layer (CBL). Two models are tested: in Model 1 the base of the CBL coincides with the LAB, whereas in Model 2 the base of the CBL is at a 180 km depth. The uncertainty of density model is < 0.02 t/m3 or < 0.6% with respect to primitive mantle. The results, calculated at in situ and at room temperature (SPT) conditions, indicate a heterogeneous density structure of the Siberian lithospheric mantle with a strong correlation between mantle density variations and the tectonic setting. Three types of cratonic mantle are recognized from mantle density anomalies. ‘Pristine’ cratonic regions not sampled by kimberlites have the strongest depletion with density deficit of 1.8-3.0% (and SPT density of 3.29-3.33 t/m3 as compared to 3.39 t/m3 of primitive mantle). Cratonic mantle affected by magmatism (including the kimberlite provinces) has a typical density deficit of 1.0-1.5%, indicative of a metasomatic melt-enrichment. Intracratonic sedimentary basins have a high density mantle (3.38-3.40 t/m3 at SPT) which suggests, at least partial, eclogitization. Moderate density anomalies beneath the Tunguska Basin imply that the source of the Siberian LIP lies outside of the Craton. In situ mantle density is used to test the isopycnic condition of the Siberian Craton. Both CBL thickness models indicate significant lateral variations in the isopycnic state, correlated with mantle depletion and best achieved for the Anabar Shield region and other intracratonic domains with a strongly depleted mantle. A comparison of synthetic Mg# for the bulk lithospheric mantle calculated from density with Mg# from petrological studies of peridotite xenoliths from the Siberian kimberlites suggests that melt migration may produce local patches of metasomatic material in the overall depleted mantle.
Comptes Rendus Geoscience, in press available 11p.
Africa, Morocco
Peridotite
Abstract: The Beni Bousera peridotite contains a diversity of pyroxenite layers. Several studies have postulated that at least some of them represent elongated strips of oceanic lithosphere recycled in the convective mantle. Some pyroxenites were, however, ascribed to igneous crystal segregation or melt-rock reactions. To further constrain the origin of these rocks, we collected 171 samples throughout the massif and examined their variability in relation with the tectono-metamorphic domains. A major finding is that all facies showing clear evidence for a crustal origin are concentrated in a narrow corridor of mylonitized peridotites, along the contact with granulitic country rocks. These peculiar facies were most likely incorporated at the mantle-crust boundary during the orogenic events that culminated in the peridotite exhumation. The other pyroxenites derive from a distinct protolith that was ubiquitous in the massif before its exhumation. They were deeply modified by partial melting and melt-rock reactions associated with lithospheric thinning.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 8p.
Africa, Botswana
Deposit - AK6
Abstract: The AK6 kimberlite is situated 25 km south of the Debswana Orapa Mine in Botswana and was discovered by De Beers geologists in 1969 during the follow-up of geophysical targets in the Orapa area. The kimberlite was not extensively pursued at the time as the initial bulk sampling indicated it to be of limited size and low grade, factors largely contributed to by the basalt breccia capping. Completion of high resolution integrated geophysical techniques and drill bulk sampling to depth recovered 97 tons of kimberlite during 2003 and 2004, which led to the increased size and grade estimates. Bulk sampling by Large Diameter Drilling (LDD, 23 inch diameter) commenced in 2005; 13 holes were drilled to a cumulative depth of 3,699 m and 689 carats of diamonds were recovered. In July 2006 the De Beers Mineral Resource Classification Committee classified these Phase I LOO results at a High Inferred level with an average grade of 24 carats per hundred tonnes (cpht) at a bottom cut-off of +1 mm, and a modeled average diamond value of 150 dollars per carat. A second phase of LDO drilling was initiated in 2006, and bulk sampling by trenching commenced in 2007 in order to deliver a resource estimate at indicated level. An Indicated Resource of 11.1 million carats at an average grade of 22 cpht was declared for the deposit mining lease application lodged in 2007.
Abstract: South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. Over 70 countries were included as members of the KPCS at the end of 2007. To prevent trade in "conflict diamonds" while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was (1) to assess the naturally occurring endowment of diamonds in Mali (potential resources) based on geological evidence, previous studies, and recent field data and (2) to assess the diamond-production capacity and measure the intensity of mining activity. Several possible methods can be used to estimate the potential diamond resource. However, because there is generally a lack of sufficient and consistent data recording all diamond mining in Mali and because time to conduct fieldwork and accessibility to the diamond mining areas are limited, four different methodologies were used: the cylindrical calculation of the primary kimberlitic deposits, the surface area methodology, the volume and grade approach, and the content per kilometer approach. Approximately 700,000 carats are estimated to be in the alluvial deposits of the Kenieba region, with 540,000 carats calculated to lie within the concentration grade deposits. Additionally, 580,000 carats are estimated to have been released from the primary kimberlites in the region. Therefore, the total estimated diamond resources in the Kenieba region are thought to be nearly 1,300,000 carats. The Bougouni zones are estimated to have 1,000,000 carats with more than half, 630,000 carats, contained in concentrated deposits. When combined, the Kenieba and Bougouni regions of Mali are estimated to be host to 2,300,000 carats of diamonds.
Abstract: In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by both diamond-producing and diamond-importing countries. Over 70 countries were included as members at the end of 2007. To prevent trade in "conflict" diamonds while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was to assess the alluvial diamond resource endowment and current production capacity of the alluvial diamond-mining sector in Ghana. A modified volume and grade methodology was used to estimate the remaining diamond reserves within the Birim and Bonsa diamond fields. The production capacity of the sector was estimated using a formulaic expression of the number of workers reported in the sector, their productivity, and the average grade of deposits mined. This study estimates that there are approximately 91,600,000 carats of alluvial diamonds remaining in both the Birim and Bonsa diamond fields: 89,000,000 carats in the Birim and 2,600,000 carats in the Bonsa. Production capacity is calculated to be 765,000 carats per year, based on the formula used and available data on the number of workers and worker productivity. Annual production is highly dependent on the international diamond market and prices, the numbers of seasonal workers actively mining in the sector, and environmental conditions, which influence seasonal farming.
Abstract: In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. The goal of this study was to estimate the alluvial diamond resource endowment and the current production capacity of the alluvial diamond mining sector of Guinea. A modified volume and grade methodology was used to estimate the remaining diamond reserves within Guinea’s diamondiferous regions, while the diamond-production capacity of these zones was estimated by inputting the number of artisanal miners, the number of days artisans work per year, and the average grade of the deposits into a formulaic expression. Guinea’s resource potential was estimated to be approximately 40 million carats, while the production capacity was estimated to lie within a range of 480,000 to 720,000 carats per year. While preliminary results have been produced by integrating historical documents, five fieldwork campaigns, and remote sensing and GIS analysis, significant data gaps remain. The artisanal mining sector is dynamic and is affected by a variety of internal and external factors. Estimates of the number of artisans and deposit variables, such as grade, vary from site to site and from zone to zone. This report has been developed on the basis of the most detailed information available at this time. However, continued fieldwork and evaluation of artisanally mined deposits would increase the accuracy of the results.
Abstract: High-Mg lavas are characteristic of the mid-Miocene volcanism in Inner Asia. In the Vitim Plateau, small volume high-Mg volcanics erupted at 16-14 Ma, and were followed with voluminous moderate-Mg lavas at 14-13 Ma. In the former unit, we have recorded a sequence of (1) initial basaltic melts, contaminated by crustal material, (2) uncontaminated high-Mg basanites and basalts of transitional (K-Na-K) compositions, and (3) picrobasalts and basalts of K series; in the latter unit a sequence of (1) initial basalts and basaltic andesites of transitional (Na-K-Na) compositions and (2) basalts and trachybasalts of K-Na series. From pressure estimation, we infer that the high-Mg melts were derived from the sub-lithospheric mantle as deep as 150 km, unlike the moderate-Mg melts that were produced at the shallow mantle. The 14-13 Ma rock sequence shows that initial melts equilibrated in a garnet-free mantle source with subsequently reduced degree of melting garnet-bearing material. No melting of relatively depleted lithospheric material, evidenced by mantle xenoliths, was involved in melting, however. We suggest that the studied transition from high- to moderate-Mg magmatism was due to the mid-Miocene thermal impact on the lithosphere by hot sub-lithospheric mantle material from the Transbaikalian low-velocity (melting) domain that had a potential temperature as high as 1510 °?. This thermal impact triggered rifting in the lithosphere of the Baikal Rift Zone.
Journal of South American Earth Sciences, Vol. 71, pp. 248-261.
South America, Paraguay
Carbonatite
Abstract: This work describes rare accessory minerals in volcanic and subvolcanic silica-undersaturated peralkaline and agpaitic rocks from the Permo-Triassic Cerro Boggiani complex (Eastern Paraguay) in the Alto Paraguay Alkaline Province. These accessory phases consist of various minerals including Th-U oxides/silicates, Nb-oxide, REE-Sr-Ba bearing carbonates-fluorcarbonates-phosphates-silicates and Zr-Na rich silicates. They form a late-stage magmatic to deuteric/metasomatic assemblage in agpaitic nepheline syenites and phonolite dykes/lava flows made of sodalite, analcime, albite, fluorite, calcite, ilmenite-pyrophanite, titanite and zircon. It is inferred that carbonatitic fluids rich in F, Na and REE percolated into the subvolcanic system and metasomatically interacted with the Cerro Boggiani peralkaline and agpaitic silicate melts at the thermal boundary layers of the magma chamber, during and shortly after their late-stage magmatic crystallization and hydrothermal deuteric alteration.
Contributions to Mineralogy and Petrology, Vol. 171, pp. 95-121.
Technology
Melting - peridotite
Abstract: Melting experiments have been performed at 3 GPa, between 1150 and 1450 °C, on a phlogopite-peridotite source in the garnet stability field. We succeeded to extract and determine the melt compositions of both phlogopite-bearing lherzolite and harzburgite from low to high degrees of melting (? = 0.008-0.256). Accounting for the presence of small amounts of F in the mantle, we determined that phlogopite coexists with melt >150 °C above the solidus position (1150-1200 °C). Fluorine content of phlogopite continuously increases during partial melting from 0.2 to 0.9 wt% between 1000 and 1150 °C and 0.5 to 0.6 wt% between 1150 and 1300 °C at 1 and 3 GPa, respectively. The phlogopite continuous breakdown in the lherzolite follows the reaction: 0.59 phlogopite + 0.52 clinopyroxene + 0.18 garnet = 0.06 olivine + 0.23 orthopyroxene + 1.00 melt. In the phlogopite-harzburgite, the reaction is: 0.93 phlogopite + 0.46 garnet = 0.25 olivine + 0.14 orthopyroxene + 1.00 melt. Melts from phlogopite-peridotite sources at 3 GPa are silica-undersaturated and are foiditic to trachybasaltic in composition from very low (0.8 wt%) to high (25.6 wt%) degrees of melting. As observed at 1 GPa, the potassium content of primary mantle melts is buffered by the presence of phlogopite, but the buffering values are higher, from 6.0 to 8.0 wt% depending on the source fertility. We finally show that phlogopite garnet-peridotite melts are very close to the composition of the most primitive post-collisional lavas described worldwide.
Journal of African Media Studies, Vol. 8, 2, pp. 109-126.
Africa
History
Abstract: This paper argues that the western press often ignores the private sphere of economics in reporting conflict in the developing world. This matters when it comes to resource wars and conflict over natural resources. To explore this concept further I examine American and British press coverage of conflict diamonds in the Angola, Congo and Sierra Leone wars in the pages of four newspapers of record. Overall while conflict diamonds were present in the reporting the press ignored the full extent of private companies and capital in the financing and trading of conflict diamonds. The most common word used was government.
Abstract: Variations in the temperature of the mantle drive its convective circulation, a process that links the deep mantle with the atmosphere and oceans through volcanic and tectonic activity. Because of this connection, effective models of Earth’s evolution must incorporate the planet’s thermal history, for which a crucial constraint is the mantle’s current temperature. Researchers look at chemistry of Iceland’s newly erupted lava to analyze the temperature of the mantle below. A false-color backscatter electron image of an olivine crystal from Borgarhraun, a lava field in northern Iceland. The crystal contains a spinel inclusion, set in a fine-grained crystalline groundmass. The chemistry of these crystals records the temperatures at which they crystallized. The image is approximately 1.5 millimeters wide. Credit: S. Matthews. Because the mantle’s temperature cannot be measured directly, scientists have devised a number of creative methods to derive this information, but these have produced widely varying results. Now Matthews et al. offer new constraints on this parameter beneath Iceland, one of the few places on Earth where a divergent plate boundary is subaerially exposed because of an anomalously large amount of melting occurring beneath the island. Using a recently developed mineral thermometry technique, the researchers found that lava flows from four different eruptions along Iceland’s Northern Volcanic Zone crystallized at substantially higher temperatures (maximum 1399°C) than average mid-ocean ridge samples that have experienced little melting (maximum 1270°C). Next, the team developed a thermal model of mantle melting and used it, along with other observations such as the local thickness of the crust, to quantify the uncertainties in deriving mantle temperatures from their data. Researchers look at chemistry of Iceland’s newly erupted lava to analyze the temperature of the mantle below. An analysis of fresh lavas from Iceland indicates the mantle below the island is much hotter than beneath other locations on divergent plate boundaries. Credit: Terri Cook and Lon Abbott. Their results indicate that the mantle below Iceland is at least 140°C hotter than that beneath average mid-ocean ridges. This outcome should shed light on the factors that control the extent of melting beneath Iceland, including the ongoing debate about whether the voluminous melting is due to a deep mantle plume and, if so, whether changes in its magma production reflect variations in the plume’s temperature.
Abstract: Mafic rocks comprising tholeiitic pillow basalt, dolerite and minor gabbro form the basal stratigraphic unit in the ca. 2.8 to 2.6 Ga Geita Greenstone Belt situated in the NW Tanzania Craton. They outcrop mainly along the southern margin of the belt, and are at least 50 million years older than the supracrustal assemblages against which they have been juxtaposed. Geochemical analyses indicate that parts of the assemblage approach high Mg-tholeiite (more than 8 wt.% MgO). This suite of samples has a restricted compositional range suggesting derivation from a chemically homogenous reservoir. Trace element modeling suggests that the mafic rocks were derived by partial melting within the spinel peridotite field from a source rock with a primitive mantle composition. That is, trace elements maintain primitive mantle ratios (Zr/Hf = 32-35, Ti/Zr = 107-147), producing flat REE and HFSE profiles [(La/Yb)pm = 0.9-1.3], with abundances of 3-10 times primitive mantle and with minor negative anomalies of Nb [(Nb/La)pm = 0.6-0.8] and Th [(Th/La)pm = 0.6-0.9]. Initial isotope compositions (?Nd) range from 1.6 to 2.9 at 2.8 Ga and plot below the depleted mantle line suggesting derivation from a more enriched source compared to present day MORB mantle. The trace element composition and Nd isotopic ratios are similar to the mafic rocks outcropping ?50 km south. The mafic rocks outcropping in the Geita area were erupted through oceanic crust over a short time period, between ?2830 and ?2820 Ma; are compositionally homogenous, contain little to no associated terrigenous sediments, and their trace element composition and short emplacement time resemble oceanic plateau basalts. They have been interpreted to be derived from a plume head with a primitive mantle composition.
Abstract: Most kimberlites contain abundant dunitic nodules. These are centimetre-sized, rounded and multi-grained assemblages of xenocrystic olivine with a wide range of compositions (Fo83 to Fo94). The absence of orthopyroxene and other mantle minerals and the range of olivine compositions have been attributed to reaction between mantle peridotite and (proto)kimberlitic fluid or melt, but the timing of the reaction is a subject of debate. In a kimberlite from the Kangamiut region of Greenland, nodule cores are surrounded by fine-grained outer margins with near-constant Fo contents (~Fo88) but highly variable minor element contents (e.g. 500-2500 ppm Ni). These margins crystallized from the kimberlite melt and we show that their compositions can be explained by crystallization of olivine alone, if a high partition coefficient for Ni between melt and olivine (DNi > 20) is assumed. Orthopyroxene assimilation is not required, removing the constraint that its dissolution occurred during ascent of the kimberlite magma. Within some nodules, in addition to the usual core-to-margin gradients, we observe asymmetric compositional changes (variable Fo but near-constant minor element contents) across mobile grain boundaries. These changes document fluid percolation at the grain scale that occurred during dynamic recrystallization in the deforming lithospheric mantle. We note that chemical gradients associated with mobile grain boundaries are observed in olivines that cover the entire compositional range of the nodules, and propose that fluid-assisted dynamic recrystallization took place in dunite that was already compositionally heterogeneous. Reaction between peridotite and protokimberlitic melt or fluid and dissolution of orthopyroxene thus occurred within the lithospheric mantle, immediately (a few days) prior to the ascent of the kimberlite melt and the entrainment of the dunite nodules. We propose that the grain boundary zones probably mimic, at a fine scale, the fluid-peridotite interaction that caused, at a larger scale, orthopyroxene dissolution and formation of compositionally diverse olivine in kimberlites.
Progress in Earth and Planetary Science, Open access
Mantle
Convection, geodynamics
Abstract: Subduction initiation is a key in understanding the dynamic evolution of the Earth and its fundamental difference to all other rocky planetary bodies in our solar system. Despite recent progress, the question about how a stiff, mostly stagnant planetary lid can break and become part in the global overturn of the mantle is still unresolved. Many mechanisms, externally or internally driven, are proposed in previous studies. Here, we present the results on subduction initiation obtained by dynamically self-consistent, time-dependent numerical modelling of mantle convection. We show that the stress distribution and resulting deformation of the lithosphere are strongly controlled by the top boundary formulation: A free surface enables surface topography and plate bending, increases gravitational sliding of the plates and leads to more realistic, lithosphere-scale shear zones. As a consequence, subduction initiation induced by regional mantle flow is demonstrably favoured by a free surface compared to the commonly applied, vertically fixed (i.e. free-slip) surface. In addition, we present global, three-dimensional mantle convection experiments that employ basal heating that leads to narrow mantle plumes. Narrow mantle plumes impinging on the base of the plate cause locally weak plate segments and a large topography at the lithosphere-asthenosphere boundary. Both are shown to be key to induce subduction initiation. Finally, our model self-consistently reproduces an episodic lid with a fast global overturn due to the hotter mantle developed below a former stagnant lid. We conclude that once in a stagnant-lid mode, a planet (like Venus) might preferentially evolve by temporally discrete, global overturn events rather than by a continuous recycling of lid and that this is something worth testing more rigorously in future studies.
Abstract: Lateral variations in lithosphere thickness are observed in many continental regions, especially at the boundary between the ancient cratonic core and the adjacent more juvenile lithosphere. In some places, such as the North America craton margin in western Canada and the Sorgenfrei-Tornquist Zone in northern Europe, the transition in lithosphere thickness has a steep gradient (>45°) and it appears to be a long-lived feature (at least 50 Ma). We use thermal-mechanical numerical models to address the dynamics of lithospheric thickness changes on timescales of 100 Ma. Models start with the juxtaposition of 60 km thick lithosphere ("mobile belt") and 160 km thick lithosphere ("craton"). In the reference model, all mantle materials have a damp olivine rheology and a density comparable to primitive mantle. With this configuration, edge-driven mantle convection occurs at the craton boundary, resulting in a lateral smoothing of the thickness transition. The density and rheology of the craton mantle lithosphere are then varied to approximate changes in composition and water content. For all densities, a steep transition is maintained only if the craton strength is 5-50 times stronger than the reference damp olivine. If dry olivine is an upper limit on strength, only cratonic mantle with moderate compositional buoyancy (20-40 kg/m3 less dense than primitive mantle) remains stable. At higher densities, the thick lithosphere is eroded through downwellings, and the craton margin migrates inboard. Conversely, a compositionally buoyant craton destabilises through lateral spreading below the mobile belt.
Abstract: The chemical composition of Earth's mantle can tell us how our planet formed and how subsequent mantle dynamics have since homogenized the mantle through convective processes. Most terrestrial rocks have a similar tungsten (W) isotope composition (1), but some rocks that have been dated at 2.8 Ga (billion years old) (2), 3.8 Ga (3), and 3.96 Ga (4) have elevated 182W/184W ratios. This is reported as µ182W, in parts per million (ppm) deviation from the bulk silicate Earth. Until now, the outliers have included only these ancient rock samples with a small µ182W excess (?15 ppm) that can be attributed to the final ?0.5% of Earth's mass that accreted late in its accretion history. On page 809 of this issue, Rizo et al. (5) report W isotope data from young mantle-derived rocks with µ182W excesses of 10 to 48 ppm. This result is spectacular because the range of µ182W values in mantle-derived rocks is larger than can be accommodated by late accretion; the implication is that remnants of Earth's earliest mantle have been preserved over the entirety of Earth's history.
Abstract: Thermo-mechanical thinning of the lithosphere by mantle plumes is essential for intra-plate volcanism, the initiation of rifting, the evolution of Earth’s lower continental crust and the genesis of metals, diamonds and hydrocarbons. To develop a new understanding of how a mantle plume thins the overlying lithosphere beneath moving plates, we use 2-D and 3-D numerical models based on a finite-element discretization on anisotropic adaptive meshes. Our models include Earth-like material properties for the upper mantle (e.g. temperature and viscosity contrasts, non-Newtonian rheology) discretised at a local mesh resolution that has previously been considered intractable. In our simulations, a plume is injected at the base of the model (670 km depth) with a prescribed mass flux that is consistent with surface observations of topographic swells: from 0.5 (e.g. Louisville, Bermuda, Darfur) to 7 Mg/s (Hawaii). We undertake a systematic numerical study, across a wide parameter space, to investigate the effect of plume buoyancy flux, plate velocity, rheology law and Rayleigh number on processes leading to a reduction of the depth of the Lithosphere Asthenosphere boundary (LAB), such as small-scale convection (SSC) (‘dripping’), or delamination of the lower lithosphere.
Abstract: This article briefly outlines the history of the colonial diamond industry of Sierra Leone from 1930 to 1961, highlighting its contingent aspects and the bonds guiding the decisions and actions taken by local social actors in different contexts and at different times. By drawing on colonial documents and memoirs of colonial officers, it shows how the colonial government of Sierra Leone and the mining company that exercised a monopoly on diamond extraction collaborated on the establishment of a series of legislative and disciplinary devices that encompassed forms of biopolitical expertise.
Historical Research, Vol. 89, no 243, pp. 136-157.
Africa, Sierra Leone
History
Abstract: This article briefly outlines the history of the colonial diamond industry of Sierra Leone from 1930 to 1961, highlighting its contingent aspects and the bonds guiding the decisions and actions taken by local social actors in different contexts and at different times. By drawing on colonial documents and memoirs of colonial officers, it shows how the colonial government of Sierra Leone and the mining company that exercised a monopoly on diamond extraction collaborated on the establishment of a series of legislative and disciplinary devices that encompassed forms of biopolitical expertise.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 14p.
Technology
Crushing
Abstract: The diamond industry is no newcomer to High Pressure Grinding Rolls (HPGR) as it has used the technology for more than 20 years, predominantly in secondary crushing and recrushing roles. In fact it could be argued that the diamond industry has led the way for the wider minerals industry to consider its application. In existing conventional secondary cone crushing applications, large valuable diamonds are "won" through meticulously managing the recovery process within defined particle size ranges. COllventional crushers operate with relatively large closed side sehings, hut have the potential to damage diamonds by making direct contact with the sides of the crusher. Cone crushers also result in steep product size distributions that run a high risk of losing many of the smaller, un-liberated but more abundant diamonds from the rock. This current comminution paradigm of particle size reduction management results in recrushing processing applications or plants where HPGRs are often used. HPGRs operate under the seemingly odd condition where the gap between the rolls is largely a function of the roll diameter irrespective of the feed size. This otTern an opportun'ity for the diamond industry to consider using multiple HPGRs or units with high circulating loads to effectively generate a product with a very high proportion of fine material that can be rejected ahead of the beneficiation step. This in effect results in a new paradigm, a single comminution step, where all diamonds of all sizes are liberated and preserved. The circuit product size distribution will consist mainly of barren kimberlitic fines along with some grits, pebbJes, indicator minerals, as well as the prized lUldamaged diamonds. The HPGR product stream needs to be scrubbed, slurried and screened at t mm resulting in a greatly reduced volume of -diamond-rich particles that progress to the dense medium concentration and/or direct x-ray separation steps_ In this application, the HPGR is viewed "outside the box", but within the context of diamond winning processes. Examples of how "HPGR can go all the way" are presented in the paper. Page
Abstract: Cratons are old and strong continental cores where the lithosphere is thick and remains largely undeformed for 2-3 b.y. Unlike typical cratons, the Wyoming craton underwent pervasive deformation ca. 80-55 Ma during the Laramide orogeny in the west-central United States, and has been subsequently encroached upon by the Yellowstone hotspot since 2.0 Ma. However, the mechanism for the deformation and the craton-hotspot interaction are not well understood. We present here a three-dimensional shear wave velocity model beneath the Wyoming craton constrained from Rayleigh wave data, which reveal new details about the cratonic lithosphere. The average lithosphere thickness beneath the craton is ?150 km, significantly thinner than a normal cratonic root (>200 km). Continuous low velocities are observed beneath the Yellowstone hotspot and the Cheyenne belt. A low-velocity column is also present in the central-eastern craton at depths of 115-250 km. These low velocities can be explained by hot temperature and partial melting, implying mantle upwelling. A high-velocity anomaly with a dripping shape in central Wyoming extends to 200-250 km depth, indicating mantle downwelling and lithosphere erosion. Our model provides the first seismic evidence for complex small-scale mantle convection beneath the Wyoming craton. The convection probably developed during the subduction of the Farallon plate and has been reinforced by the Yellowstone hotspot. We propose that the combination of flat-slab subduction, small-scale convection, and hotspot activity can lead to massive destruction of a cratonic lithosphere.
The Orange and Riet River alluvial diamond deposits in the vicinity of Douglas, Northern Cape Province: geology, evaluation, and exploitation of unique South African large diamond producing deposits.
IGC 35th., Session Mineral Exploration 1p. Abstract
Progress in Earth and Planetary Science, Vol. 3, 7p.
Mantle
Melting
Abstract: Because of the high energies involved, giant impacts that occur during planetary accretion cause large degrees of melting. The depth of melting in the target body after each collision determines the pressure and temperature conditions of metal-silicate equilibration and thus geochemical fractionation that results from core-mantle differentiation. The accretional collisions involved in forming the terrestrial planets of the inner Solar System have been calculated by previous studies using N-body accretion simulations. Here we use the output from such simulations to determine the volumes of melt produced and thus the pressure and temperature conditions of metal-silicate equilibration, after each impact, as Earth-like planets accrete. For these calculations a parameterised melting model is used that takes impact velocity, impact angle and the respective masses of the impacting bodies into account. The evolution of metal-silicate equilibration pressures (as defined by evolving magma ocean depths) during Earth’s accretion depends strongly on the lifetime of impact-generated magma oceans compared to the time interval between large impacts. In addition, such results depend on starting parameters in the N-body simulations, such as the number and initial mass of embryos. Thus, there is the potential for combining the results, such as those presented here, with multistage core formation models to better constrain the accretional history of the Earth.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 24p.
Global
Database, ages
Abstract: Of the approximately 6,500 kimberlites known to date, less than 3% are diamondiferous and less than half of those are economically viable. Admittedly, this is a global figure and varies from area to area much depending on geological, logistical, and political circumstances. The number of diarnond~bearing kimberlites is an important geobarometer, and an age-frequency profile has been compiled in order to identify diamond metallogenic epochs and provinces. Four primary diamond clusters have been recognised: Siberia (332-370Ma), Kaapvaal South(114-144Ma), Kaapvaal Southwest(84-95Ma), and Slave (52-55Ma). In addition, three secondary clusters are the Kaapvaal Central (S06-S38Ma), the Man Craton (139-lS3Ma) and the Kasai Craton (120- 130Ma). The Kaapvaal is the only area where kimberlites with diamonds were discovered between 1870 and 1925, except for the Prairie Creek discovery in North America in 1906 and Colossus in Zimbabwe in 1907. Between 1906 and 1940 no major diamondiferous kimbcrlites were discovered, but many of Africa's alluvial deposits were found and exploited in that period. Advances in scientific prospecting in the 1940's rapidly accelerated the discovery rate that peaked in the 1990's; 39 diamondiferous occurrences were found in the 1980's, of which 8 became mines and 5 are in feasibility, and nearly 450ha of kimberlite was added to the global resource base. Despite the accelerated exploration expenditure, the last decade (e.g. 2000-2009) has been the leanest since the 1940's. The most important reason for this decline in exploration success is that any undiscovered deposits are largely buried by younger cover. Understanding complex and geophysical noisy basement geology, as well as decomposition of path-finder minerals are major challenges to further exploration success. Major investments in basic geological expertise and field research will have to be made in order to secure future diamond resources. Integrated geophysical studies, geochemistry diamond forensics, and improved imaging of Earth's upper mantle are perhaps foremost in this requirement, but the costs of these activities are such that government support will be required if countries are to sustain their diamond mining industry.
De Wit, M., Bhebhe, Z., Davidson, J., Haggerty, S.E., Hundt, P., Jacob, J., Lynn, M., Marshall, T.R., Skinner, C., Smithson, K., Stiefenhofer, J., Robert, M., Revitt, A., Spaggiari, R., Ward, J.
Abstract: From the discovery of diamonds in South Africa in 1866 until the end of 2013, Africa is estimated to have produced almost 3.2 Bct out of a total global production of 5.03 Bct, or 63.6% of all diamonds that have ever been mined. In 2013 African countries ranked 2nd (Botswana), 3rd (DRC), 6th (Zimbabwe), 7th (Angola), 8th (South Africa), and 9th (Namibia), in terms of carat production and 1st (Botswana), 4th (Namibia), 5th (Angola), 6th (South Africa), 7th (Zimbabwe), and 9th (DRC), in terms of value of the diamonds produced. In 2013 Africa produced 70.6 Mct out of a global total of 130.5 Mct or 54.1%, which was valued at US$ 8.7 billion representing 61.5% of the global value of US$ 14.1 billion.
Science Advance AEON and Earth Stewardship Science Research Institute, Nelson Mandela Metropolitan Univerisity, 13p.
Technology
Glacial remnants, exosphere, silica pipes
Abstract: Estimates of ocean temperatures on Earth 3.5 billion years ago (Ga) range between 26° and 85°C. We present new data from 3.47- to 3.43-Ga volcanic rocks and cherts in South Africa suggesting that these temperatures reflect mixing of hot hydrothermal fluids with cold marine and terrestrial waters. We describe fossil hydrothermal pipes that formed at ~200°C on the sea floor >2 km below sea level. This ocean floor was uplifted tectonically to sea level where a subaerial hydrothermal system was active at 30° to 270°C. We also describe shallow-water glacial diamictites and diagenetic sulfate mineral growth in abyssal muds. These new observations reveal that both hydrothermal systems operated in relatively cold environments and that Earth’s surface temperatures in the early Archean were similar to those in more recent times.
Mineralogy and Petrology, in press available, 17p.
Africa, Burundi
Carbonatite
Abstract: The Matongo carbonatite intrusive body in the Neoproterozoic Upper Ruvubu alkaline plutonic complex (URAPC) in Burundi is overlain by an economic phosphate ore deposit that is present as breccia lenses. The ore exhibits evidence of supergene enrichment but also preserves textures related to the concentration of fluorapatite in the carbonatitic system. Magmatic fluorapatite is abundant in the ore and commonly occurs as millimeter-sized aggregates. It is enriched in light rare earth elements (LREE), which is especially apparent in the final generation of magmatic fluorapatite (up to 1.32 wt% LREE2O3). After an episode of metasomatism (fenitization), which led to the formation of K-feldspar and albite, the fluorapatite-rich rocks were partly brecciated. Oxygen and carbon isotope compositions obtained on the calcite forming the breccia matrix (?18O?=?22.1?‰ and ?13C?=??1.5?‰) are consistent with the involvement of a fluid resulting from the mixing of magmatic-derived fluids with a metamorphic fluid originating from the country rocks. In a subsequent postmagmatic event, the carbonates hosting fluorapatite were dissolved, leading to intense brecciation of the fluorapatite-rich rocks. Secondary carbonate-fluorapatite (less enriched in LREE with 0.07-0.24 wt% LREE2O3 but locally associated with monazite) and coeval siderite constitute the matrix of these breccias. Siderite has ?18O values between 25.4 and 27.7?‰ and very low ?13C values (from ?12.4 to ?9.2?‰), which are consistent with the contribution of organic-derived low ?13C carbon from groundwater. These signatures emphasize supergene alteration. Finally, the remaining voids were filled with a LREE-poor fibrous fluorapatite (0.01 wt% LREE2O3), forming hardened phosphorite, still under supergene conditions. Pyrochlore and vanadiferous magnetite are other minerals accumulated in the eluvial horizons. As a consequence of the supergene processes and fluorapatite accumulation, the phosphate ore, which contains 0.72 to 38.01 wt% P2O5, is also enriched in LREE (LaN/YbN from 47.1 to 83.5; ?REE between 165 and 5486 ppm), Nb (up to 656 ppm), and V (up to 1232 ppm). In the case of phosphate exploitation at Matongo, REE could prove to have a subeconomic potential to be exploited as by-products of phosphates.
Geological Society of America Bulletin, Vol. 128, 1/2, pp. 169-186.
Africa, Tanzania
Lineaments
Abstract: The North Tanzanian divergence zone along the East African Rift is characterized by active faults and several large volcanoes such as Meru, Ol Doinyo Lengai, and Kilimanjaro. Based on systematic morphostructural analysis of the Shuttle Radar Topographic Mission digital elevation model and targeted field work, 14 debris avalanche deposits were identified and characterized, some of them being - to our knowledge - previously unknown. Our field survey around Mount Meru allowed previous "lahar" deposits to be reinterpreted as debris avalanche deposits and three major collapse events to be distinguished, with the two older ones being associated with eruptions. We used topographic lineaments and faults across the North Tanzanian divergence zone to derive the main tectonic trends and their spatial variations and highlight their control on volcano collapse orientation. Based on previous analogue models, the tectonic regime is inferred from the orientation of the collapse scars and/or debris avalanche deposits. We infer two types of regime: extensional and transtensional/strike-slip. The strike-slip regime dominates along the rift escarpment, but an extensional regime is inferred to have operated for the recent sector collapses. The proposed interpretation of sector collapse scars and debris avalanche deposits therefore provides constraints on the tectonic regime in the region. It is possible that, in some cases, movement on regional faults triggered sector collapse.
Abstract: The concept of a mineral deposit forming via a mineral system that operates across areas of perhaps 1000s of squares kilometres and to mantle depths has important implications for greenfields mineral exploration. Geographically widespread datasets and deep penetrating geophysical methods are required to map key mineral system elements such as fluid/metal source zones and migration paths. Developed primarily for academic studies of the deep crust, there are several established geophysical techniques that can potentially be used to identify elements of mineral systems in the deep crust and upper mantle. Although the seismic reflection method produces the highest quality images, it is prohibitively expensive and the recommended approach is a combination of MT surveys and receiver function recordings with CCP stacking. Mineral system elements that can be detected in this fashion include major structures and geological boundaries which are potential controls on fluid flow and also areas of crust and mantle that have been altered by one or both of fluid creation and migration.
REM: Revista Escola de Minas, Vol. 67, 2, pp. 159-165. *** in Portuguese
South America, Brazil
Alluvials, diamonds
Abstract: A representative set of diamonds from the Borrachudo River (114 stones) was described for the first time as to their physical characteristics, among them weight, morphology, dissolution figures, and abrasion. Most samples are low in weight (~51% less than 0.30 ct) and only ~3.5% are above 3.0 ct. However, considering the total weight, ~47% of it is concentrated in the range above 3 ct. On the other hand, there even occur diamonds with dozen of carats. The most common crystallographic forms are originated from the octahedral form by dissolution, although irregular shapes like chips and flats also occur. The diamonds show differences in form compared to their weight ranges; those up to 0.30 ct have various shapes; in the range of 0.31 to 1 ct the most common are octahedral forms and their descendants; and in stones larger than 1 ct chips and flats predominate. The general habitus of the crystals, identified by their final tetrahexahedroid shapes, chips and flats, corroborated by the dissolution figures, indicate that the diamond were submitted to strong dissolution in a magmatic environment. Residual hillocks and holes represent the final stage of dissolution. The study indicates that the abrasion by the fluvial transport was not expressive enough to cause mechanical wear, thus ca. 97% shows no sign of wear. This fact suggests a proximal source for most of these diamonds.
Devriese, S.G.R., Corcoran, N., Cowan, D., Davis, K., Bild-Enkin, D., Fournier, D., Heagy, L., Kang, S., Marchant, D., McMillan, M.S., Mitchell, M., Rosenkjar, G., Yang, D., Oldenburg, D.W.
Abstract: The magnetic and electromagnetic responses from airborne systems at Tli Kwi Cho, a kimberlite complex in the Northwest Territories, Canada, have received considerable attention over the last two decades but a complete understanding of the causative physical properties is not yet at hand. Our analysis is distributed among three papers. In the first, we find a 3D magnetic susceptibility model for the area; in the second, we find a 3D conductivity model; and in the third paper, we find a 3D chargeability model. Our goal is to explain all the geophysical results within a geologic framework. In this first paper, we invert three independent airborne magnetic data sets flown over the Tli Kwi Cho kimberlite complex located in the Lac de Gras kimberlite field in Northwest Territories, Canada. The complex consists of two kimberlites known as DO-27 and DO- 18. An initial airborne DIGHEM survey was flown in 1992 and AeroTEM and VTEM data subsequently acquired in 2003 and 2004, respectively. In this paper, we invert each magnetic data set in three dimensions. Both kimberlites are recovered in each model, with DO-27 as a more susceptible body than DO-18. Our goal is to simultaneously invert the three data sets to generate a single susceptibility model for Tli Kwi Cho. This project is part of a larger, on-going investigation by UBC-GIF on inverting magnetic, electromagnetic, and induced polarization data from the Tli Kwi Cho area.
Abstract: A high-temperature rheometer equipped with a graphite furnace, characterized by an air-bearing-supported synchronous motor, has been enhanced by a custom-made Pt-Au concentric cylinder assembly. With this adaptation, viscosity measurements of highly fluid melts can be achieved at high temperatures, up to 1273 K. Due to the air-bearing-supported motor, this apparatus can perform measurements of extremely low torque ranging between 0.01 ?Nm and 230 mNm (resolution of 0.1 nNm), extending the typical range of viscosity measurements accessible in the present configuration to 10?3.5-103.5 Pa•s and shear rates up to 102 of s?1. We calibrated the system with distilled water, silicone oils, and the DGG-1 standard glass. We further present new data for the viscosity of Na2CO3, K2CO3, and Li2CO3 liquids. Finally, a comparison between our results and literature data is provided, to illustrate the effect of chemical composition and oxygen fugacity on the viscosity of alkali carbonate melts, which serve as analogs for both carbonatitic melts and molten carbonates of industrial relevance. This study substantially improves the database of alkali carbonate melts and dramatically increases the accuracy with respect to previous measurement attempts. The very low viscosity range data and their temperature dependence also helps to constrain very well the activation energy of these highly fluid systems and confirms the estimate of a universal pre-exponential factor for non-Arrhenian viscosity-temperature relationships.
Abstract: A VTEM survey was flown over the Drybones kimberlite in 2005, followed by a ZTEM survey in 2009. These data sets were inverted on multiple previous occasions using various 1D, 2D, 3D and plate modelling algorithms. VTEM data showed AIP effects, manifested as negative voltages and otherwise skewed transients. This created artefacts in conventional inversions of VTEM data, which showed some inconsistencies with ZTEM inversions, as well as with the known geology. In 2015 the VTEM data were transferred to Aarhus Geophysics, reprocessed and reinverted using the modified "AarhusINV" code with Cole-Cole modelling. The results are presented in current abstract, they appear to be more interpretable and provide better data fit, than previous inversion attempts.
Abstract: Hundred-micrometer-sized calcium-aluminum-silicates (CAS) inclusions occur in moissanite-4H, moissanite-15R, and moissanite-6H from Turkey. These inclusions commonly consist of tabular exsolution lamellae of two different minerals. By combined electron microprobe and Raman spectroscopy analysis, at least eight different, essentially Mg- and Fe-free Ca-Al-silicate or Al-silicate phases have been discerned. The most common phase is dmisteinbergite, a hexagonal modification of CaAl2Si2O8, occurring in association with lamellae of Cax(Al,Si)1?xO3 or Ca1?x(Al,Si)2+xO5 compositions. All three phases contain significant amounts of BaO (up to 2 mol% of celsiane component in dmisteinbergite), SrO, SO3, and light rare earth elements (LREE). In particular, Ca1?x(Al,Si)2+xO5 contains up to 2.1 wt% of LREE, 3.9 wt% of F, and significant traces of Cl, while it is also associated to osbornite (TiN). Pure ghelenite, Ca2Al2SiO7, and three additional compositions, namely CaAl4-xSixO7, Ca1-x(Al,Si)3+xO6, and Ca3-x(Al,Si)6+xO14 have been found, either occurring as single grains or forming exsolution lamellae. They also contain significant amounts of BaO, SrO, SO3, and LREE. One last intriguing phase is composed in average of 65.9 wt% SiO2, 17.4% Al2O3, 3.0% alkalis, 6.0% BaO, 2.0% CaO+MgO, 0.9% ZrO2, and up to 0.5% LREE. Dmisteinbergite and ghelenite show Raman peaks in very good agreement with literature data, Cax(Al,Si)1-xO3 shows main Raman modes at 416 and 1009 cm?1, Ca1-x(Al,Si)3+xO6 at 531 and 1579 cm?1 while Ca3-x(Al,Si)6+xO14 has a strong peak at 553 cm?1. CaAl4-xSixO7 shows a weak Raman pattern, while Ca1-x(Al,Si)2+xO5 has no detectable Raman modes. Since the association moissanite-CAS is thermodynamically not stable at ambient pressure and moissanite crystals hosting the CAS phases have ?13C values typical of deep-mantle origin, we interpret the CAS inclusions as partially retrogressed HP minerals. Striking analogies exist between observed CAS compositions and experimentally obtained HP-HT mineralogy. For instance, Cax(Al,Si)1-xO3 contains up to 25 mol% of Al2O3, which is considered as the upper limit of alumina solubility in Ca-perovskite. The study confirms that CAS phases are an important mantle depository for large ion lithophile elements (LILE) and LREE.
Russian Geology and Geophysics, Vol. 56, pp. 1663-1670.
Global, Japan
Mantle plume
Abstract: The volume and style of volcanism change periodically, with cycles of three main scales, which have different causes and effects. Short cycles of volcanic activity last from tens to thousands of years and are associated with periodic accumulation of magma in shallow chambers and its subsequent eruptions. The eruptions either have internal causes or are triggered externally by variations in solar activity, tidal friction, and Earth’s rotation speed. Medium-scale cycles, hundreds of thousands to millions of years long, are due to changes in spreading and subduction rates. Long cycles (30–120 Ma) are related to ascent of mantle plumes, which take away material and heat from the core-mantle boundary and change the convection rate. These appear to be the major controls of the average periodicity. Acceleration of asthenospheric convection caused by periodic plume activity pulses can change spreading rates and, correspondingly, the relative positions of moving plates. The medium-scale periodicity of volcanism is illustrated by the examples of Kamchatka and Japan, where the intensity of subduction magmatism changes periodically in response to the opening of back-arc basins (Shikoku, Sea of Japan, and South Kurile basin).
Geophysical Research Letters, Vol. 43, 10, pp. 4945-4953.
Mantle
Subduction
Abstract: Advances in global seismic tomography have increasingly motivated identification of subducted lithosphere in Earth’s deep mantle, creating novel opportunities to link plate tectonics and mantle evolution. Chief among those is the quest for a robust subduction reference frame, wherein the mantle assemblage of subducted lithosphere is used to reconstruct past surface tectonics in an absolute framework anchored in the deep Earth. However, the associations heretofore drawn between lower mantle structure and past subduction have been qualitative and conflicting, so the very assumption of a correlation has yet to be quantitatively corroborated. Here we show that a significant, time-depth progressive correlation can be drawn between reconstructed subduction zones of the last 130 Myr and positive S wave velocity anomalies at 600 -2300 km depth, but that further correlation between greater times and depths is not presently demonstrable. This correlation suggests that lower mantle slab sinking rates average between 1.1 and 1.9 cmyr 1.
Abstract: New mineralogical and bulk-rock geochemical data for the recently recognised Mesoproterozoic (ca. 1100 Ma) and late Cretaceous (ca. 90 Ma) kimberlites in the Timmasamudram cluster (TKC) of the Wajrakarur kimberlite field (WKF), Eastern Dharwar Craton, southern India, are presented. On the basis of groundmass mineral chemistry (phlogopite, spinel, perovskite and clinopyroxene), bulk-rock chemistry (SiO2, K2O, low TiO2, Ba/Nb and La/Sm), and perovskite Nd isotopic compositions, the TK-1 (macrocrystic variety) and TK-4 (microcrystic variety) kimberlites in this cluster are here classified as orangeites (i.e. Group II kimberlites), with geochemical characteristics that are very similar to orangeites previously described from the Bastar Craton in central India, as well as the Kaapvaal Craton in South Africa. The remaining kimberlites (e.g., TK-2, TK-3 and the TK-1 microcrystic variant), are more similar to other 1100 Ma, Group I-type kimberlites of the Eastern Dharwar Craton, as well as the typical Group I kimberlites of the Kaapvaal Craton. Through the application of geochemical modelling, based on published carbonated peridotite/melt trace element partition coefficients, we show that the generation of the TKC kimberlites and the orangeites results from low degrees of partial melting of a metasomatised, carbonated peridotite.
Mineralogy and Petrology, Vol. 110, 2, pp. 295-307.
India
Deposit - Wajrakarur
Abstract: Although Ti-rich garnets are commonly encountered in the groundmass of many alkaline igneous rocks, they are comparatively rare in kimberlites. Here we report on the occurrence of Ti-rich garnets in the groundmass of the P-15 and KL-3 kimberlites from the diamondiferous Wajrakarur field in the Eastern Dharwar craton of southern India. These garnets contain considerable Ti (11.7-23.9 wt.% TiO2), Ca (31.3-35.8 wt.% CaO), Fe (6.8-15.5 wt.% FeOT) and Cr (0.04-9.7 wt.% Cr2O3), but have low Al (0.2-5.7 wt.% Al2O3). In the case of the P-15 kimberlite they display a range in compositions from andradite to schorlomite, with a low proportion of grossular (andradite(17.7-49.9)schorlomite(34.6-49.5)-grossular(3.7-22.8)-pyrope(1.9-10.4)). A few grains also contain significant chromium and represent a solid solution between schorlomite and uvarovite. The Ti-rich garnets in the KL-3 kimberlite, in contrast, are mostly schorlomitic (54.9?90.9 mol %) in composition. The Ti-rich garnets in the groundmass of these two kimberlites are intimately associated with chromian spinels, perhaps suggesting that the garnet formed through the replacement of spinel. From the textural evidence, it appears unlikely that the garnets could have originated through secondary alteration, but rather seem to have formed through a process in which early magmatic spinels have reacted with late circulating, residual fluids in the final stages of crystallization of the kimberlite magma. Raman spectroscopy provides evidence for low crystallinity in the spinels which is likely to be a result of their partial transformation into andradite during their reaction with a late-stage magmatic (kimberlitic) fluid. The close chemical association of these Ti-rich garnets in TiO2-FeO-CaO space with those reported from ultramafic lamprophyres (UML) is also consistent with results predicted by experimental studies, and possibly implies a genetic link between kimberlite and UML magmas. The occurrence of Ti-rich garnets of similar composition in the Swartruggens orangeite on the Kaapvaal craton in South Africa, as well as in other kimberlites with an orangeitic affinity (e.g. the P-15 kimberlite on the Eastern Dharwar craton in southern India), is inferred to be a reflection of the high Ca- and high Ti-, and the low Al-nature, of the parent magma (i.e. Group II kimberlites).
Mineralogy and Petrology, in press available, 13p.
India
Deposit - Wajrakur
Abstract: Although Ti-rich garnets are commonly encountered in the groundmass of many alkaline igneous rocks, they are comparatively rare in kimberlites. Here we report on the occurrence of Ti-rich garnets in the groundmass of the P-15 and KL-3 kimberlites from the diamondiferous Wajrakarur field in the Eastern Dharwar craton of southern India. These garnets contain considerable Ti (11.7-23.9 wt.% TiO2), Ca (31.3-35.8 wt.% CaO), Fe (6.8-15.5 wt.% FeOT) and Cr (0.04-9.7 wt.% Cr2O3), but have low Al (0.2-5.7 wt.% Al2O3). In the case of the P-15 kimberlite they display a range in compositions from andradite to schorlomite, with a low proportion of grossular (andradite(17.7-49.9)schorlomite(34.6-49.5)-grossular(3.7-22.8)-pyrope(1.9-10.4)). A few grains also contain significant chromium and represent a solid solution between schorlomite and uvarovite. The Ti-rich garnets in the KL-3 kimberlite, in contrast, are mostly schorlomitic (54.9?90.9 mol %) in composition. The Ti-rich garnets in the groundmass of these two kimberlites are intimately associated with chromian spinels, perhaps suggesting that the garnet formed through the replacement of spinel. From the textural evidence, it appears unlikely that the garnets could have originated through secondary alteration, but rather seem to have formed through a process in which early magmatic spinels have reacted with late circulating, residual fluids in the final stages of crystallization of the kimberlite magma. Raman spectroscopy provides evidence for low crystallinity in the spinels which is likely to be a result of their partial transformation into andradite during their reaction with a late-stage magmatic (kimberlitic) fluid. The close chemical association of these Ti-rich garnets in TiO2-FeO-CaO space with those reported from ultramafic lamprophyres (UML) is also consistent with results predicted by experimental studies, and possibly implies a genetic link between kimberlite and UML magmas. The occurrence of Ti-rich garnets of similar composition in the Swartruggens orangeite on the Kaapvaal craton in South Africa, as well as in other kimberlites with an orangeitic affinity (e.g. the P-15 kimberlite on the Eastern Dharwar craton in southern India), is inferred to be a reflection of the high Ca- and high Ti-, and the low Al-nature, of the parent magma (i.e. Group II kimberlites).
Earth and Planetary Science Letters, Vol. 451, pp. 232-240.
Mantle
Peridotite
Abstract: We present new Zn elemental and isotope data on seventeen fertile and refractory mantle peridotite xenoliths. Eleven fertile peridotites are garnet and spinel lherzolites from Vitim and Tariat (Siberia and Mongolia) and represent some of the most pristine fertile peridotites available. Six refractory peridotites are spinel harzburgites from the Udachnaya kimberlite (Siberian craton) that are nearly pristine residues of high-degree polybaric melting at high pressure (7-4 GPa). Geochemical data suggest that Zn isotopic compositions in the peridotites have not been affected by post-melting processes such as metasomatism, contamination by the host-magmas or alteration. The fertile peridotites have uniform Zn concentrations (59±2 ppm59±2 ppm) and Zn isotopic compositions with ?66Zn (relative to JMC-Lyon-03-0749l)?=?+0.30?±?0.03‰ consistent with the Bulk Silicate Earth estimates of ?66Zn?=?+0.28?±?0.05‰ (Chen et al., 2013). The refractory peridotites have Zn concentrations ranging from 30 to 48 ppm and ?66Zn from +0.10±0.01‰+0.10±0.01‰ to +0.18±0.01‰+0.18±0.01‰ with an average of +0.14±0.03‰+0.14±0.03‰. Our data suggest that the lithospheric mantle has a heterogeneous Zn isotopic composition. Modeling of Zn isotope partitioning during partial melting of fertile mantle suggests that high degrees of melt extraction (>30%) may significantly fractionate Zn isotopes (up to 0.16‰) and that during mantle melting, Zn concentrations and isotopic compositions are mainly controlled by the stability of clinopyroxene and garnet within the melting residue. Because the stability of clinopyroxene and garnet is mainly pressure dependent we suggest that both the depth and the degrees of melt extraction may control Zn isotope fractionation during mantle melting.
Mineralogy and Petrology, In press available, 24p.
Australia
Carbonatite
Abstract: In situ SHRIMP U-Pb dating of zirconolite in clinopyroxenite from the Cummins Range Carbonatite Complex, situated in the southern Halls Creek Orogen, Kimberley region, Western Australia, has provided a reliable 207Pb/206Pb age of emplacement of 1009 ± 16 Ma. Variably metamict and recrystallised zircons from co-magmatic carbonatites, including a megacryst ~1.5 cm long, gave a range of ages from ~1043-998 Ma, reflecting partial isotopic resetting during post-emplacement deformation and alteration. Monazite-(Ce) in a strongly foliated dolomite carbonatite produced U-Th-Pb dates ranging from ~900-590 Ma. Although the monazite-(Ce) data cannot give any definitive ages, they clearly reflect a long history of hydrothermal alteration/recrystallisation, over at least 300 million years. This is consistent with the apparent resetting of the Rb-Sr and K-Ar isotopic systems by a post-emplacement thermal event at ~900 Ma during the intracratonic Yampi Orogeny. The emplacement of the Cummins Range Carbonatite Complex probably resulted from the reactivation of a deep crustal structure within the Halls Creek Orogen during the amalgamation of Proterozoic Australia with Rodinia over the period ~1000-950 Ma. This may have allowed an alkaline carbonated silicate magma that was parental to the Cummins Range carbonatites, and generated by redox and/or decompression partial melting of the asthenospheric mantle, to ascend from the base of the continental lithosphere along the lithospheric discontinuity constituted by the southern edge of the Halls Creek Orogen. There is no evidence of a link between the emplacement of the Cummins Range Carbonatite Complex and mafic large igneous province magmatism indicative of mantle plume activity. Rather, patterns of Proterozoic alkaline magmatism in the Kimberley Craton may have been controlled by changing plate motions during the Nuna-Rodinia supercontinent cycles (~1200-800 Ma).
Abstract: New work from Carnegie’s Peter Driscoll suggests Earth’s ancient magnetic field was significantly different than the present day field, originating from several poles rather than the familiar two. It is published in Geophysical Research Letters. Earth generates a strong magnetic field extending from the core out into space that shields the atmosphere and deflects harmful high-energy particles from the Sun and the cosmos. Without it, our planet would be bombarded by cosmic radiation, and life on Earth’s surface might not exist. The motion of liquid iron in Earth’s outer core drives a phenomenon called the geodynamo, which creates Earth’s magnetic field. This motion is driven by the loss of heat from the core and the solidification of the inner core. But the planet’s inner core was not always solid. What effect did the initial solidification of the inner core have on the magnetic field? Figuring out when it happened and how the field responded has created a particularly vexing and elusive problem for those trying to understand our planet’s geologic evolution, a problem that Driscoll set out to resolve. Here’s the issue: Scientists are able to reconstruct the planet’s magnetic record through analysis of ancient rocks that still bear a signature of the magnetic polarity of the era in which they were formed. This record suggests that the field has been active and dipolar—having two poles—through much of our planet’s history. The geological record also doesn’t show much evidence for major changes in the intensity of the ancient magnetic field over the past 4 billion years. A critical exception is in the Neoproterozoic Era, 0.5 to 1 billion years ago, where gaps in the intensity record and anomalous directions exist. Could this exception be explained by a major event like the solidification of the planet’s inner core? In order to address this question, Driscoll modeled the planet’s thermal history going back 4.5 billion years. His models indicate that the inner core should have begun to solidify around 650 million years ago. Using further 3-D dynamo simulations, which model the generation of magnetic field by turbulent fluid motions, Driscoll looked more carefully at the expected changes in the magnetic field over this period. “What I found was a surprising amount of variability,” Driscoll said. “These new models do not support the assumption of a stable dipole field at all times, contrary to what we’d previously believed.” His results showed that around 1 billion years ago, Earth could have transitioned from a modern-looking field, having a “strong” magnetic field with two opposite poles in the north and south of the planet, to having a “weak” magnetic field that fluctuated wildly in terms of intensity and direction and originated from several poles. Then, shortly after the predicted timing of the core solidification event, Driscoll’s dynamo simulations predict that Earth’s magnetic field transitioned back to a “strong,” two-pole one. “These findings could offer an explanation for the bizarre fluctuations in magnetic field direction seen in the geologic record around 600 to 700 million years ago,” Driscoll added. “And there are widespread implications for such dramatic field changes.” Overall, the findings have major implications for Earth’s thermal and magnetic history, particularly when it comes to how magnetic measurements are used to reconstruct continental motions and ancient climates. Driscoll’s modeling and simulations will have to be compared with future data gleaned from high quality magnetized rocks to assess the viability of the new hypothesis.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 299-331.
Mantle
Magmatism
Abstract: Continental magmatic arcs form above subduction zones where the upper plate is continental lithosphere and/or accreted transitional lithosphere. The best-studied examples are found along the western margin of the Americas. They are Earth's largest sites of intermediate magmatism. They are long lived (tens to hundreds of millions of years) and spatially complex; their location migrates laterally due to a host of tectonic causes. Episodes of crustal and lithospheric thickening alternating with periods of root foundering produce cyclic vertical changes in arcs. The average plutonic and volcanic rocks in these arcs straddle the compositional boundary between an andesite and a dacite, very similar to that of continental crust; about half of that comes from newly added mafic material from the mantle. Arc products of the upper crust differentiated from deep crustal (>40 km) residual materials, which are unstable in the lithosphere. Continental arcs evolve into stable continental masses over time; trace elemental budgets, however, present challenges to the concept that Phanerozoic arcs are the main factories of continental crust.
Abstract: Mariupolite, aegirine-albite nepheline syenite, outcropping only in the Oktiabrski massif in south-eastern Ukraine, is a potential resource of Nb, Zr and REE for future exploration and development. Some types of this rock can be also used in ceramics, glass and building industry and jewellery. Mariupolite is composed of (1) magmatic and (2) subsolidus and hydrothermal components. The magmatic assemblage includes zircon, aegirine, nepheline, albite, K-feldspar, pyrochlore, fluorapatite, fluorbritholite-(Ce) and magnetite. Alkaline-carbonate-chloride-rich fluids exsolved very early in the history of the rock, in a late stage of, or directly after, its consolidation, induced intensive high-temperature alteration of the primary mariupolite components resulted in formation of cancrinite, calcite, fluorite, REE-bearing minerals such as monazite, parasite-(Ce), bastnäsite-(Ce), as well as sodalite, natrolite and hematite. The genesis of this peculiar mineralization seems to be associated with multistage magmatic and tectonic activity of the Ukrainian Shield and fluids mediated metasomatic processes.
Eakin, C.M., Long, M.D., Scire, A., Beck, S.L., Wagner, L.S., Zandt, G., Tavera, H.
Internal deformation of the subducted Nazca slab inferred from seismic anisotropy. ..new study suggests that the Earth's rigid tectonic plates stay strong when they slide under another plate, known as subduction, may not be universal.
Abstract: Blue diamonds are among the rarest and most valuable of naturally occurring gemstones. In this study, 12 rough naturally-sourced type IIb diamonds were subjected to HPHT annealing, three different irradiation energies, and then all were stepwise annealed from 200 °C to 1100 °C and the optical defects were documented by changes in phosphorescence and photoluminescence spectroscopy. Several optical features that are removed from natural type IIb diamonds by HPHT processing, such as 3H, 648.2 nm peak, 776.4 nm peak, and 660 nm band (red) phosphorescence, can be reintroduced into these diamonds with subsequent electron irradiation and annealing at low-to-moderate temperatures. The thermal stability of these centers along with their spatial distribution provided additional insights into their configuration and distinguished them from nitrogen-bearing diamonds.
Abstract: Photoluminescence (PL) spectroscopy is frequently mentioned in the gemological literature, but its relevance to the wider trade audience is rarely discussed. Due to the possibility of an undisclosed treatment or a synthetic origin, all type II diamonds (both colorless and fancy-color) and colorless type IaB diamonds submitted to gemological laboratories should ideally be tested using PL spectroscopy. Although the proportion of samples that require this testing is small, the failure to properly identify treated and synthetic diamonds could destabilize the diamond industry. This article seeks to clarify the underlying physics and methodology of this important tool for gemologists.
Abstract: This article presents statistical data and distinctive features from several hundred faceted CVD-grown synthetic diamonds examined by GIA researchers from 2003 through June 2016. This study, the first comprehensive summary published on such a large number of gem-quality CVD synthetics, describes the reliable means of identifying them, with a focus on material currently marketed for jewelry use. Most CVD synthetic diamonds analyzed by GIA have been in the near-colorless or pink color ranges, with clarity grades comparable to those of their natural counterparts. Faceted CVD samples are generally 2 ct or less, though the sizes are increasing. They can be identified by their distinctive fluorescence pattern using the DiamondView imaging instrument, and by the detection of the silicon-vacancy defect using photoluminescence (PL) spectroscopy. Some visual gemological characteristics provide indicators, but not definitive proof, of CVD origin.
Diamond and Related Materials, in press available 29p.
Technology
Green diamonds
Abstract: The green coloration of natural diamonds typically results from exposure to natural irradiation. This creates the GR1 optical center and in many diamonds, surficial damage, principally due to alpha radiation, which helps verify natural origin. In this study, 13 naturally irradiated diamonds with pronounced radiation stains were stepwise annealed from 200 °C to 1400 °C and the changes in color and defects were documented by photomicrography and spectroscopy. Additionally 3 diamonds were subjected to isothermal annealing at 550 °C. The radiation stains correlated with radiation-damage Raman peaks — a broad and shifted diamond Raman peak and radiation-related peaks at 1500 and 1640 cm? 1. The color transitioned from green to brown after heating to 550-600 °C and the stains were essentially decolorized at 1400 °C. Confocal Raman depth profiling showed that the depth penetration of the radiation stain was about 10-15 ?m into the diamond and this depth profile was distinctly different from depth profiles of ion-irradiation stains generated in a laboratory.
Doklady Earth Sciences, Vol. 470, 2, pp. 1023-1026.
Russia, Siberia
Deposit - Billyakh River placers
Abstract: The mineral chemistry and crystal morphology of kimberlite pyropes from the Billyakh River placer in the northeastern Siberian craton are characterised in terms of the placer history. The pyropes bear signatures of chemical weathering (dissolution), presumably in a Middle Paleozoic laterite profile, and therefore were originally hosted by Middle Paleozoic kimberlites. The broad occurrence of placer pyropes with lateritic dissolution signatures points to the presence of Middle Paleozoic diamond-bearing kimberlites in the study area.
Abstract: The Slave Province is a geological formation that lies between Great Slave Lake and Coronation Gulf. The area contains some of the oldest known igneous and metamorphic rocks on Earth, and has a long history of mining. This project examines the surface sediment deposited during a number of past glaciations, as well as permafrost. Minerals of economic interest are found within the surface sediment and can be used to locate economic mineral deposits in the underlying bedrock. This project will improve our understanding of glacial sediments, stimulate exploration of diamond and metals in the Slave Province, and will determine permafrost conditions to inform future infrastructure development.
Abstract: Precambrian supercontinents Nuna-Columbia (1.7 to 1.3 billion years ago) and Rodinia (1.1 to 0.7 billion years ago) have been proposed. However, the arrangements of crustal blocks within these supercontinents are poorly known. Huge, dominantly basaltic magmatic outpourings and intrusions, covering up to millions of square kilometres, termed Large Igneous Provinces, typically accompany (super) continent breakup, or attempted breakup and offer an important tool for reconstructing supercontinents. Here we focus on the Large Igneous Province record for Siberia and Laurentia, whose relative position in Nuna-Columbia and Rodinia reconstructions is highly controversial. We present precise geochronology—nine U -Pb and six Ar -Ar ages—on dolerite dykes and sills, along with existing dates from the literature, that constrain the timing of emplacement of Large Igneous Province magmatism in southern Siberia and northern Laurentia between 1,900 and 720 million years ago. We identify four robust age matches between the continents 1,870, 1,750, 1,350 and 720 million years ago, as well as several additional approximate age correlations that indicate southern Siberia and northern Laurentia were probably near neighbours for this 1.2-billion-year interval. Our reconstructions provide a framework for evaluating the shared geological, tectonic and metallogenic histories of these continental blocks.
Geological Society of London Special Publication Supercontinent Cycles through Earth History., Vol. 424, pp. 1-14.
Mantle
Supercontinents
Abstract: The supercontinent-cycle hypothesis attributes planetary-scale episodic tectonic events to an intrinsic self-organizing mode of mantle convection, governed by the buoyancy of continental lithosphere that resists subduction during closure of old ocean basins, and consequent reorganization of mantle convection cells leading to opening of new ocean basins. Characteristic timescales of the cycle are typically 500-700 myr. Proposed spatial patterns of cyclicity range from hemispheric (introversion) to antipodal (extroversion), to precisely between those end-members (orthoversion). Advances in our understanding can arise from theoretical or numerical modelling, primary data acquisition relevant to continental reconstructions, and spatiotemporal correlations between plate kinematics, geodynamic events and palaeoenvironmental history. The palaeogeographic record of supercontinental tectonics on Earth is still under development. The contributions in this special publication provide snap-shots in time of these investigations and indicate that Earth's palaeogeographic record incorporates elements of all three endmember spatial patterns.
Geological Society of London Special Publication Supercontinent Cycles through Earth History., Vol. 424, pp. 167-190.
South America, Brazil
Supercontinents
Abstract: Moderate to high palaeolatitudes recorded in mafic dykes, exposed along the coast of Bahia, Brazil, are partly responsible for some interpretations that the São Francisco/Congo craton was separate from the low-latitude Rodinia supercontinent at about 1050 Ma. We report new palaeomagnetic data that replicate the previous results. However, we obtain substantially younger U-Pb baddeleyite ages from five dykes previously thought to be 1.02- 1.01 Ga according to the 40 Ar/ 39 Ar method. Specifically, the so-called 'A-normal' remanence direction from Salva-dor is dated at 924.2 + 3.8 Ma, within error of the age for the 'C' remanence direction at 921.5 + 4.3 Ma. An 'A-normal' dyke at Ilhéus is dated at 926.1 + 4.6 Ma, and two 'A-normal' dykes at Olivença have indistinguishable ages with best estimate of emplacement at 918.2 + 6.7 Ma. We attribute the palaeomagnetic variance of the 'A-normal' and 'C' directions to lack of averaging of geomagnetic palaeosecular variation in some regions. Our results render previous 40 Ar/ 39 Ar ages from the dykes suspect, leaving late Mesoproterozoic palaeolatitudes of the São Francisco/Congo craton unconstrained. The combined 'A-normal' palaeomagnetic pole from coastal Bahia places the São Francisco/Congo craton in moderate to high palaeolatitudes at c. 920 Ma, allowing various possible positions of that block within Rodinia. Despite more than two decades of intense global research, the configuration of Neoproterozoic supercontinent Rodinia remains enigmatic. Following the first global synthesis by Hoffman (1991), most models include a central location for Laurentia, flanked by 'East' Gondwana-Land cra-tons along its proto-Cordilleran margin and 'West'
Abstract: Images of diamonds appear everywhere in American culture. And everyone who has a diamond has a story to tell about it. Our stories about diamonds not only reveal what we do with these tiny stones, but also suggest how we create value, meaning, and identity through our interactions with material culture in general. Things become meaningful through our interactions with them, but how do people go about making meaning? What can we learn from an ethnography about the production of identity, creation of kinship, and use of diamonds in understanding selves and social relationships? By what means do people positioned within a globalized political-economy and a compelling universe of advertising interact locally with these tiny polished rocks? This book draws on 12 months of fieldwork with diamond consumers in New York City as well as an analysis of the iconic De Beers campaign that promised romance, status, and glamour to anyone who bought a diamond to show that this thematic pool is just one resource among many that diamond owners draw upon to engage with their own stones. The volume highlights the important roles that memory, context, and circumstance also play in shaping how people interpret and then use objects in making personal worlds. It shows that besides operating as subjects in an ad-burdened universe, consumers are highly creative, idiosyncratic, and theatrical agents.
Journal of Volcanology and Seismology, Vol. 10, 5, pp. 339-346.
Russia, Kola Peninsula, Archangel
Deposit- Lomonsov
Abstract: This paper presents results from a study of the Lomonosov volcanic pipe as derived from anomalies of the microseismic field. Microseismic sounding revealed that this volcanic pipe is a cone-shaped body with a small gradient of microseismic intensity motion (2 to 5 dB). Discontinuities generally show greater contrasts compared with the variations of microseismic motion in the pipe body. Comparison of the results of this microseismic sounding with other geological and geophysical data showed that the intensities of the micro-seismic field along lines that traversed the pipe reflect realistic structures of a kimberlite pipe and the host rocks. The method of microseismic sounding was used to reconstruct the deeper structure of the volcanic pipe and the host rocks down to depths greater than 2 km. We estimated the velocity contrast and the errors involved in the identification of vertical boundaries of the pipe. The volcanic pipe has a shape that is consistent with a nearly vertical source situated at a depth of a few hundred meters. This is hypothesized to be a typical occurrence for other diamond-bearing pipes as well.
Abstract: The controversial late Ediacaran to Cambrian paleogeography is largely due to the paucity and low reliability of available paleomagnetic poles. Baltica is a prime example of these issues. Previously published paleomagnetic results from a thick clastic sedimentary pile in the White Sea region (northern Russia) provided valuable Ediacaran paleontological and paleomagnetic data. Until recently, Cambrian-age rocks in northern Russia were known mostly from boreholes or a few small outcrops. A recent mining operation in the Winter Coast region exposed >60 m of red sandstone and siltstone of the Cambrian Brusov Formation from the walls of a diamond pit. Paleomagnetic data from these rocks yield two major components. (1) A single-polarity A component is isolated in ?90% of samples between 200 and 650 °C. The corresponding pole (Pole Latitutde, Plat = 20°S; Pole Longitude, Plong = 227°E, ?95 = 7°) agrees with the Early Ordovician reference pole for Baltica. (2) A dual-polarity B component is identified in ?33% of samples, mostly via remagnetization circles, isolated from samples above 650 °C. The corresponding pole (Plat = 12°S; Plong = 108°E, ?95 = 5°) is close to other late Ediacaran data but far from all younger reference poles for Baltica. We argue for a primary magnetization for the B component and the secondary origin of the other Cambrian poles from Baltica. This in turn requires a major reshuffling of all continents and blocks around the North Atlantic. The early stages of Eurasia amalgamation and models for the evolution of the Central Asian Orogenic Belt require revision.
GAC MAC Meeting Special Session SS11: Cratons, kimberlites and diamonds., Keynote abstract
Technology
Emplacement
Abstract: The study develops a new approach utilizing parameters of trigonal etch pits on diamond crystals to infer the conditions of diamond residence in kimberlite magma. Diamond crystals from dissolution experiments conducted at 1 GPa and 1150-1350 °C in the presence of H2O-rich or CO2-rich fluid were studied with atomic force microscopy (AFM). The AFM data of resorbed diamond surfaces show that much deeper surface relief was produced in CO2 fluid. It also clearly distinguishes the profiles of the trigonal etch pits forming regular flat-bottomed trigons in H2O fluid, and round- or pointed-bottomed trigons in CO2 fluid. The relationship between the diameter and the depth of the trigonal pits is found to be another important indicator of the fluid composition. Dissolution in H2O fluid develops trigons with constant diameter and variable depth where the diameter increases with temperature. Trigons developed in CO2 fluid have a large range of diameters showing a strong positive correlation with the depth. The developed criteria applied to the natural diamond crystals from three Ekati Mine kimberlites indicate significant variation in CO2-H2O ratio and temperature of their magmatic fluid. This conclusion based on diamond resorption agrees with the mineralogy of microphenocrysts and groundmass of the studied kimberlites offering new method to study crystallization conditions of kimberlite magma.
Ecole Nationale Superieure des Mines de Paris, 207p. Pdf
Global
Microdiamonds
Abstract: This research deals with diamond content estimation in kimberlite based on information obtained from microdiamond sampling. In spite of the abundance of diamonds smaller than 0.5mm square mesh the conventional approach of estimating diamond content is based on information derived from stones in the +0.5mm size fraction. While large samples are required to ensure recovery of sufficient numbers of diamonds for evaluation the largest number is therefore discarded as treatment tailings. As far back as the 1960’s this inspired the approach to lower the bottom screen aperture in order to recover microdiamonds, and was accompanied by the introduction of recovery methodology based on acid dissolution. As a consequence the required sample size is smaller, bringing along many practical advantages. The research deals with estimation of the weight of diamonds (diamond content) in kimberlite, based on information obtained from microdiamond sampling to a bottom screen diameter as low as 0.075 mm square mesh (~0.0000018 carats). Determination of the diamond size distribution has always been a challenge when estimating deposit diamond content. The method proposed in the research is based on the assumption of lognormality, which is in line with experience at all primary deposits. Over the years special techniques of estimating deposit diamond content have been developed and in this research have ‘matured’ into a proper sampling and estimation approach, taking cognizance of the fact that sampling is partially ‘flawed’ due to inevitable losses of diamonds during sample treatment. Some smaller diamonds are lost when they pass through the bottom cut-off screen used during diamond recovery, when according to their weight they should actually be recovered. Other losses of small diamonds occur when they remain locked in host rock particles and are discarded along with non-diamond bearing material. Modelling of diamond content is performed by means of an iterative process of simulating diamonds as distributed in their in situ state, followed by emulating recovery effects to reproduce a representative sample.
Contributions to Mineralogy and Petrology, Vol. 171, pp. 1-12.
Europe
Bohemian
Abstract: A unique assemblage including kumdykolite and kokchetavite, polymorphs of albite and K-feldspar, respectively, together with cristobalite, micas, and calcite has been identified in high-pressure granulites of the Orlica-Snieznik dome (Bohemian Massif) as the product of partial melt crystallization in preserved nanogranites. Previous reports of both kumdykolite and kokchetavite in natural rocks are mainly from samples that passed through the diamond stability field. However, because the maximum pressure recorded in these host rocks is <3 GPa, our observations indicate that high pressure is not required for the formation of kumdykolite and kokchetavite, and their presence is not therefore an indicator of ultrahigh-pressure conditions. Detailed microstructural and microchemical investigation of these inclusions indicates that such phases should instead be regarded as (1) a direct mineralogical criteria to identify former melt inclusions with preserved original compositions, including H2O and CO2 contents and (2) indicators of rapid cooling of the host rocks. Thus, the present study provides novel criteria for the interpretation of melt inclusions in natural rocks and allows a more rigorous characterization of partial melts during deep subduction to mantle depth as well as their behavior on exhumation.
Abstract: The number of studies investigating the vesiculation of natural samples and their implications to volcanic degassing and eruption mechanisms has been growing rapidly within the last decades. To interpret the natural rock textures, the geoscience community has produced a range of experimental and theoretical data sets on bubble nucleation, growth, and coalescence in magmatic systems. A robust experimental database is required to calibrate (theoretical and empirical) modeling approaches, which allow the calculation of magma ascent rates from volcanic ejecta mainly by the determination of the bubble number density (BND). Although, the available data set is still limited, it already shows that variations in melt (and volatile/fluid) composition can have a significant effect. In this manuscript we (re-)evaluate the existing experimental data set, while focusing mainly on the review and discussion of continuous decompression experiments. One aim of this review article is to encourage scientists to fill the gaps in the existing experimental data sets and help to acknowledge, use, and further develop the most promising experimental techniques. Therefore, we highlight different methods and discuss their advantages and possible limitations. We also discuss possible ways of how to better account for the influence of melt composition in models, which link BND to decompression rate.
Abstract: Geological-geochemical evidence point towards higher mantle potential temperature and a different type of tectonics (global plume-lid tectonics) in the early Earth (>3.2 Ga) compared to the present day (global plate tectonics). In order to investigate tectono-magmatic processes associated with plume-lid tectonics and crustal growth under hotter mantle temperature conditions, we conduct a series of 3D high-resolution magmatic-thermomechanical models with the finite-difference code I3ELVIS. No external plate tectonic forces are applied to isolate 3D effects of various plume-lithosphere and crust-mantle interactions. Results of the numerical experiments show two distinct phases in coupled crust-mantle evolution: (1) a longer (80-100 Myr) and relatively quiet ‘growth phase’ which is marked by growth of crust and lithosphere, followed by (2) a short (?20 Myr) and catastrophic ‘removal phase’, where unstable parts of the crust and mantle lithosphere are removed by eclogitic dripping and later delamination. This modelling suggests that the early Earth plume-lid tectonic regime followed a pattern of episodic growth and removal also called episodic overturn with a periodicity of ?100 Myr.
Abstract: Comparing the early Earth to the present day, geological-geochemical evidence points towards higher mantle potential temperature and a different type of tectonics. In order to investigate possible changes in Precambrian tectonic styles, we conduct 3D high-resolution petrological-thermomechanical numerical modelling experiments for oceanic plate subduction under an active continental margin at a wide range of mantle potential temperature TP (? TP = 0 ? 250 K, compared to present day conditions). At present day mantle temperatures (? TP = 0 K), results of numerical experiments correspond to modern-style subduction, whereas at higher temperature conditions important systematic changes in the styles of both lithospheric deformation and mantle convection occur. For ? TP = 50 ? 100 K a regime of dripping subduction emerges which is still very similar to present day subduction but is characterised by frequent dripping from the slab tip and a loss of coherence of the slab, which suggests a close relationship between dripping subduction and episodic subduction. At further increasing ? TP = 150 ? 200 K dripping subduction is observed together with unstable dripping lithosphere, which corresponds to a transitional regime. For ? TP = 250 K, presumably equivalent to early Archean, the dominating tectonic style is characterised by small-scale mantle convection, unstable dripping lithosphere, thick basaltic crust and small plates. Even though the initial setup is still defined by present day subduction, this final regime shows many characteristics of plume-lid tectonics. Transition between the two end-members, plume-lid tectonics and plate tectonics, happens gradually and at intermediate temperatures elements of both tectonic regimes are present. We conclude, therefore, that most likely no abrupt geodynamic regime transition point can be specified in the Earth's history and its global geodynamic regime gradually evolved over time from plume-lid tectonics into modern style plate tectonics.
Abstract: Tectonically young, orogenic settings are commonly the sites of post-collisional silica-rich ultrapotassic magmas with extreme K2O-contents of up to 9 wt% and K2O/Na2O > 2. Many experimental studies investigating the generation of these melts have concentrated on melting of homogenous phlogopite bearing peridotites, whereas geochemical signatures indicate the involvement of at least two types of source rocks: ultra-depleted and K and trace elements-enriched ones. We report the results of melting experiments at 1-2 GPa of mixed glimmerite and harzburgite, in which these rock types make up two halves each capsule. Melting begins in the glimmerite, and its metasomatic effects on the harzburgite are apparent at 1100 °C even before melt pools are visible. The first melts are Na-rich, seen in zoning of olivines and as growth of clinopyroxene in the harzburgite, but change at higher degrees of melting to produce a typical lamproite-like melt with K2O > 10 wt%. A major advantage of this study is the preservation of distinct melts in different parts of the capsule, which reflect a process of dynamic metasomatism: within the harzburgite matrix, the infiltrating melt derived from melting of the glimmerite changes consistently with the distance of travel through the harzburgite, enabling quantification of the metasomatic effects as an increase in SiO2 and K2O. This results principally from assimilation of orthopyroxene, which increases the Ol/Opx ratio of the residual harzburgite. The effects of quench olivine growth are recognizable and can be quantified due to a step-change in composition at the glimmerite/harzburgite border: the large total surface area of olivine and small melt fraction mean that the amount of quench olivine is high within the harzburgite, but negligible in the almost completely molten glimmerite. Melts of the glimmerite contain up to 8-10 wt% K2O and 53 wt% SiO2, which increase to 55-56 wt% after interaction with the harzburgite. Mediterranean lamproites resemble melts of glimmerite, whereas melts that have interacted with harzburgite are more similar to less potassic, but more SiO2-rich shoshonites of the Mediterranean region.
Fournier, D., Heagy, L., Corcoran, N., Cowan, D., Devriese, S.G.R., Bild-Enkin, D., Davis, K., Marchant, M., McMillan, M.S., Mitchell, M., Rosenkjar, G., Yang, D., Oldenburg, D.W.
Abstract: The magnetic and electromagnetic responses from airborne systems at Tli Kwi Cho, a kimberlite complex in the Northwest Territories, Canada, have received considerable attention over the last two decades but a complete understanding of the causative physical properties is not yet at hand. Our analysis is distributed among three posters. In the first we find a 3D magnetic susceptibility model for the area; in the second we find a 3D conductivity model; and in the third we find a 3D chargeability model that can explain the negative transient responses measured over the kimberlite pipes. In this second paper we focus upon the task of finding a conductivity model that is compatible with three airborne data sets flown between 1992 and 2004: one frequency-domain data set (DIGHEM) and two time-domain systems (AeroTEM and VTEM). The goal is to obtain a 3D model from which geologic questions can be answered, but even more importantly, to provide a background conductivity needed to complete the 3D IP inversion of airborne EM data. We begin by modifying our pre-existing 1D frequency and time domain inversion codes to produce models that have more lateral continuity. The results are useful in their own right but we have also found that 1D analysis is often very effective in bringing to light erroneous data, assisting in estimating noise floors, and providing some starting information for developing a background model for the 3D EM inversion. Here we show some results from our Laterally Constrained Inversion (LCI) framework. The recovered conductivity models seem to agree on the general location of the kimberlite pipes but disagree on the geometry and conductivity values at depth. The complete 3D inversions in time and frequency, needed to resolved these issues, are currently in progress.
Abstract: We present new data on the crystallization age of, and composition of olivine phenocrysts within, an alnöite and olivine melilitite of the Avon Alkalic Igneous Province (AAIP) of Missouri. The AAIP is an ultramafic igneous province consisting of more than 80 known lithologically and texturally diverse intrusions, cropping out in northeastern flank of the St. Francois Mtn. Terrane. 40Ar/39Ar geochronology of biotite phenocrysts constrains emplacement to 386 +/- 1 Ma. Xenocrystic biotite from one sample yields 40Ar/39Ar age spectra characteristic of episodic loss, indicating crystallization at ca. 1.3 Ga followed by partial loss in the ultramafic magma at 386 Ma. Olivines within the alnöite are subhedral, variably serpentinized, and embayed. Olivines within the melilitite are euhedral, but extensively serpentinized. Disequilibrium textures observed in alnöite olivine are consistent with resorption of magmatic olivine as a result of decompression during crystallization. Euhedral olivine within the melilitite appear to have remained in equilibrium with melt, suggesting derivation of alnöite and melilitite from unique magmas. Major and trace elemental abundances of olivine from the alnöite were characterized with electron probe microanalysis. Olivines are Mg-rich (Fo86.9-Fo89.9), and exhibit systematic variation in trace element (e.g., Ni (1627 to 3580 ppm), Cr (97 to 1603 ppm), Co (149 to 259 ppm), Ti (11 to 267 ppm), Al (undetectable to 923 ppm), and P (undetectable to 433 ppm)) abundances with decreasing forsterite content consistent with fractional crystallization. All geothermometers yield a range in temperature, e.g., the Al in olivine (De Hoog et al., 2009) yield temperatures of 1087° to 1313° C at depths of 80 km to 180 km (modern-day midcontinental LAB). Olivine trace element discrimination diagrams indicate AAIP magmas were derived from mantle sources with an alkalic affinity, similar to other continental alkaline rocks and kimberlite. A mantle origin via partial melting of carbonated peridotite mantle is suggested due to the high Mg content, results of geothermometric modeling, and high Ca and Ti abundance within olivine phenocrysts. Melting of the mantle may have ben triggered by "Acadian" tectonic events.
Abstract: The Quaternary Tasse basalts are exposed near the north shore of Quesnel Lake in southeastern British Columbia. They host a variety of mantle xenoliths consisting predominantly of spinel lherzolite with minor dunite and pyroxenite. Mineralogically, the xenoliths are composed of olivine, orthopyroxene, clinopyroxene and spinel characterized by forsterite (Fo87-93), enstatite (En90-92), diopside (En45-50-Wo40-45-Fs5), and Cr-spinel (6 ? 11 wt.% Cr), respectively. All of the mantle xenoliths are coarse-grained and show granoblastic textures. Clinopyroxene and spinel display textural evidence for chemical reactions with percolating melts. The mantle xenoliths are characterized by restricted Mg-numbers (89 ? 92) and low abundances of incompatible elements (Ba = 2 ? 11 ppm; Sr = 3 ? 31 ppm) and Yttrium (1 ? 3 ppm). On the basis of REE patterns, the xenoliths are divided into three groups reflecting the various degrees of mantle metasomatism: (1) Group 1 consists of concave-up LREE patterns (La/Smcn = 0.48 ? 1.16; Gd/Ybcn = 0.71 ? 0.92); (2) Group 2 possesses flat to moderately LREE-enriched patterns (La/Smcn = 1.14 ? 1.92; Gd/Ybcn = 0.87 ? 1.09); and (3) Group 3 is characterized by strongly LREE-enriched patterns (La/Smcn = 1.53 ? 2.45; Gd/Ybcn = 1.00 ? 1.32). On MORB-normalized trace element diagrams, the majority of the xenolith samples share the enrichment of LILE (Rb, Ba, K), U, Th, Pb, Sr and the depletion of HFSE (Nb, Ta, Ti, Y) relative to REE. These geochemical characteristics are consistent with a compositionally heterogeneous subcontinental lithospheric mantle source that originated as subarc mantle wedge peridotite at a convergent plate margin. The Tasse basalts have alkaline compositions characterized by low SiO2 (44 ? 46 wt.%) and high alkali (Na2O + K2O = 5.1 ? 6.6 wt.%) contents. They are strongly enriched in incompatible elements (TiO2 = 2.4 ? 3.1 wt.%; Ba = 580 ? 797 ppm; Sr = 872 ? 993 ppm) and, display OIB-like trace element patterns (La/Smn = 3.15 ? 3.85; Gd/Ybn = 3.42 ? 4.61). They have positive ?Nd (+ 3.8 to + 5.5) values, with 338 ? 426 Ma depleted mantle model ages, and display uniform OIB-like Sr (87Sr/86Sr = 0.703346 ? 0.703591) and Pb (206Pb/204Pb = 19.40 ? 19.58; 207Pb/204Pb = 15.57 ? 15.60; 208Pb/204Pb = 38.99 ? 39.14) isotopic compositions. The basalts erupted discontinuously along a > 1000 km long SE-NW-trending linear belt with minimal compositional variation indicative of a homogenous mantle source. The Sr ? Nd ? Pb isotope and trace element systematics of the alkaline basalts suggests that they originated from partial melting of an upwelling asthenospheric mantle source. Melting of the asthenospheric mantle might have stemmed from extension of the overlying lithosphere in response to the early stages of back-arc basin opening in the Omineca and Intermontane belts. Ridge subduction beneath the Canadian Cordillera might have played an important role in the weakening of the lithospheric mantle prior to its extension. Alternatively, melting of the upwelling asthenosphere in response to the delamination of the lithospheric mantle beneath the Rocky Mountain Trench might have generated the alkaline lavas.
Abstract: Moskvinite-(Y), Na2K(Y,REE)Si6O15, is a rare mineral, which until now has only been described from its type locality Dara-i-Pioz, Tajikistan. At Ilímaussaq moskvinite-(Y) was discovered in a drill core from Kvanefjeld, where it occurs as a replacement mineral associated with a mineral belonging to the britholite group. The composition was determined by a combination of electron probe microanalysis and laser ablation inductively coupled plasma mass spectrometry analyses. The empirical formula based on 15 oxygens is Na1.94K0.99(Y0.94Yb0.03Er0.03 Dy0.03Ho0.01Gd0.01) ?1.05Si5.98O15. The coexistence of an almost pure Y and a light rare-earth element (REE) mineral is interpreted as fractionation of REE and Y during the replacement of an earlier formed REE mineral. Theoretical calculations of the observed replacement of feldspathoids by natrolite show that the generated fluid would have pH > 8, which inhibits large scale mobility of REE. In addition, a K-Fe sulfide member of the chlorbartonite-bartonite group is for the first time observed in Ilímaussaq where it occurs where sodalite is replaced by natrolite and arfvedsonite by aegirine. The sulfide incorporates the S and some of the Cl generated by the alteration of sodalite, whereas the K and Fe originates from the replacement of arfvedsonite by aegirine.
Abstract: There is a rising number of near-colorless synthetics diamonds detected in the market, which create concerns for the trade. The recent advent of near-colorless melee size synthetic diamonds has raised the question of how to test large numbers of small stones. Many have turned to specialized sorting machines, which are expensive and difficult to evaluate. The problem arises only within near-colorless type IIa diamond gems. This type is commonly identified by infrared spectroscopy, which is man- or instrument-intensive. For the jeweler-gemologist, this can be identified by UV transparency, which isolates type IIa and also the even rarer type IaB from other types. Then amongst type IIas, one has to determine which are synthetic. One of the most effective sorting methods is anomalous double refringence (ADR) observing between crossed polarizers in a high-index immersion liquid. However, this method finds its limit with very small diameter stones, as then the optical pathlength is so small that no birefringence is perceived. Another approach is luminescence, based on observation of the whole stone; typically synthetics luminesce stronger in shortwave than longwave ultraviolet: this is effective to pinpoint HPHT-grown colorless and yellows, but useless for generally inert CVD-grown ones. Then the observation of luminescence zoning is usually conclusive. It necessitates expensive specialized instruments and also, a good knowledge of the very varied forms of natural diamond growth to avoid mistaking a natural for a synthetic. Finally, the last resort is luminescence spectroscopy. this typically involves laser excitation with several lasers, at low temperature. Further, this implies a very thorough knowledge of natural and synthetic diamond emissions, which limits this approach to a small number of laboratories. In practice, for a small number of stones, the definitive interpretation of spectra may remain a matter of discussion. Thus, the separation of natural from synthetic diamond mélé may appear very difficult. Yet, there are a limited number of simple devices which can help the jeweler-gemologist, even more the diamond professional. The last resort appears to be luminescence spectroscopy, but it is expensive and a great deal of interpretation is required. Automated instruments offer only limited help.
Abstract: There is a rising number of near-colorless synthetics diamonds detected in the market, which create concerns for the trade. The recent advent of near-colorless melee size synthetic diamonds has raised the question of how to test large numbers of small stones. Many have turned to specialized sorting machines, which are expensive and difficult to evaluate. The problem arises only within near-colorless type IIa diamond gems. This type is commonly identified by infrared spectroscopy, which is man- or instrument-intensive. For the jeweler-gemologist, this can be identified by UV transparency, which isolates type IIa and also the even rarer type IaB from other types. Then amongst type IIas, one has to determine which are synthetic. One of the most effective sorting methods is anomalous double refringence (ADR) observing between crossed polarizers in a high-index immersion liquid. However, this method finds its limit with very small diameter stones, as then the optical pathlength is so small that no birefringence is perceived. Another approach is luminescence, based on observation of the whole stone; typically synthetics luminesce stronger in shortwave than longwave ultraviolet: this is effective to pinpoint HPHT-grown colorless and yellows, but useless for generally inert CVD-grown ones. Then the observation of luminescence zoning is usually conclusive. It necessitates expensive specialized instruments and also, a good knowledge of the very varied forms of natural diamond growth to avoid mistaking a natural for a synthetic. Finally, the last resort is luminescence spectroscopy. this typically involves laser excitation with several lasers, at low temperature. Further, this implies a very thorough knowledge of natural and synthetic diamond emissions, which limits this approach to a small number of laboratories. In practice, for a small number of stones, the definitive interpretation of spectra may remain a matter of discussion. Thus, the separation of natural from synthetic diamond mélé may appear very difficult. Yet, there are a limited number of simple devices which can help the jeweler-gemologist, even more the diamond professional. The last resort appears to be luminescence spectroscopy, but it is expensive and a great deal of interpretation is required. Automated instruments offer only limited help.
Geological Society of London, Special Publication no. 446 on line available
Canada, Ontario, Attawapiskat
Deposit - Tango
Abstract: Extensive drilling of the Tango Extension kimberlite pipe resulted in the construction of an emplacement model that revealed the complex architecture of two amalgamated pipes: an older pipe, the Tango Extension Deep, which is cut along its northern margin by the smaller Tango Extension pipe. The resulting volcano forms a complex pipe-in-pipe structure called the Tango Extension Super Structure. The emplacement of the Tango Extension Super Structure sequence indicates prolonged hiatuses, which, similar to other volcanoes classified as monogenetic, puts the classical monogenetic and polygenetic definitions of maar-diatreme volcanoes to the test. Although the Tango Extension and Tango Extension Deep volcanoes could be characterized individually as monogenetic volcanoes, the Tango Extension Super Structure shows evidence of the occurrence of the significant hiatuses typical of polygenetic volcanoes. We suggest that hiatuses that are long enough to consolidate earlier tephra unambiguously differentiate polygenetic from monogenetic maar-diatreme volcanoes.
Geochimica et Cosmochimica Acta, in press available
Africa, Ethiopia
Metasomatism - picrites
Abstract: The origin of the Ethiopian-Yemeni Oligocene flood basalt province is widely interpreted as representing mafic volcanism associated with the Afar mantle plume head, with minor contributions from the lithospheric mantle. We reinterpret the geochemical compositions of primitive Oligocene basalts and picrites as requiring a far more significant contribution from the metasomatized subcontinental lithospheric mantle than has been recognized previously. This region displays the fingerprints of mantle plume and lithospheric drip magmatism as predicted from numerical models. Metasomatized mantle lithosphere is not dynamically stable, and heating above the upwelling Afar plume caused metasomatized lithosphere with a significant pyroxenite component to drip into the asthenosphere and melt. This process generated the HT2 lavas observed today in restricted portions of Ethiopia and Yemen now separated by the Red Sea, suggesting a fundamental link between drip magmatism and the onset of rifting. Coeval HT1 and LT lavas, in contrast, were not generated by drip melting but instead originated from shallower, dominantly anhydrous peridotite. Looking more broadly across the East African Rift System in time and space, geochemical data support small volume volcanic events in Turkana (N. Kenya), Chyulu Hills (S. Kenya) and the Virunga province (Western Rift) to be derived ultimately from drip melting. The removal of the gravitationally unstable, metasomatized portion of the subcontinental lithospheric mantle via dripping is correlated in each case with periods of rapid uplift. The combined influence of thermo-mechanically thinned lithosphere and the Afar plume together thus controlled the locus of continental rift initiation between Africa and Arabia and provide dynamic support for the Ethiopian plateau.
Geochimica et Cosmochimica Acta, in press available
Geothermometry
Abstract: The use of wet chemistry and X-ray absorption near edge structure (XANES) spectroscopy to determine the oxidation state of Fe in submarine glasses and olivine-hosted melt inclusions has provided important new insights into the global systematics of Fe3+/?Fe in mid-ocean ridge basalts (MORB) [1, 2]. Because MORB are aggregates of near-fractional partial melts formed by decompression melting of variably depleted peridotite, it is difficult to judge the extent to which they directly reflect the oxidation state of the oceanic upper mantle. To provide a theoretical framework within which to interpret Fe3+/?Fe in MORB, I have developed a model that describes the behavior of Fe3+/?Fe during spinel lherzolite partial melting in a system closed to oxygen. Modeling is carried out by calculating the Fe3+/?Fe of olivine using the point defect model of [3], and determining Fe3+/?Fe of the bulk peridotite from mineral-mineral partitioning. The inter-mineral Fe3+/Fe2+ exchange coefficients are derived from Mössbauer data on natural spinel peridotites, and are parameterized in terms of oxygen fugacity, temperature, and the Fe content of the olivine. The Fe3+/?Fe of the melt is determined by combining mass-balance with an equation relating the Fe3+/?Fe of the melt to the fugacity of oxygen [4]. Spinel lherzolite partial melting is modeled after [5]. Modeling results indicate that oxygen fugacity does not follow the fayalite-magnetite-quartz (FMQ) buffer during partial melting. For isobaric partial melting, the system becomes reduced relative to FMQ with increasing extent of melting. This results from an increase in the FMQ buffer with increasing temperature, whereas oxygen fugacity in the peridotite remains nearly constant. Conversely, during polybaric partial melting the oxidation state of the residual peridotite increases relative to FMQ. The effective partition coefficient for Fe3+is larger than previously thought, so that a redox couple with S is not required to explain its compatibility during partial melting.
Abstract: The carbon isotope composition of microdiamonds found in products of the Tolbachik Volcano eruption, Kamchatka (porous lavas and ash), was studied. The isotope composition of microdiamonds (with an average value of ?13C =-25.05‰) is close to that of microsized carbon particles in lavas (from-28.9 to-25.3‰). The general peculiarities of the diamond-forming environment include (1) no evidence for high pressure in the medium; (2) a reduced environment; and (3) mineralogical evidence for the presence of a fluid. The geochemical data characterizing the type of diamonds studied allow us to suggest that they were formed in accordance with the mechanism of diamond synthesis during cavitation in a rapidly migrating fluid, which was suggested by E.M. Galimov.
Abstract: Deciphering erosion rates over geologic time is fundamental for understanding the interplay between climate, tectonic, and erosional processes. Existing techniques integrate erosion over different time scales, and direct comparison of such rates is routinely done in earth science. On the basis of a global compilation, we show that erosion rate estimates in glaciated landscapes may be affected by a systematic averaging bias that produces higher estimated erosion rates toward the present, which do not reflect straightforward changes in erosion rates through time. This trend can result from a heavy-tailed distribution of erosional hiatuses (that is, time periods where no or relatively slow erosion occurs). We argue that such a distribution can result from the intermittency of erosional processes in glaciated landscapes that are tightly coupled to climate variability from decadal to millennial time scales. In contrast, we find no evidence for a time scale bias in spatially averaged erosion rates of landscapes dominated by river incision. We discuss the implications of our findings in the context of the proposed coupling between climate and tectonics, and interpreting erosion rate estimates with different averaging time scales through geologic time.
Indicator mineral and geochemistry dat a for a till and alluvium sampling survey in the McFaulds Lake ( Ring of Fire) area, northern Ontario. Mentions KIMS.
Ontario Geological Survey Report and Data, Report 6309, Data release 322.
Abstract: Seismic images of Earth's interior reveal two massive anomalous zones at the base of the mantle, above the core, where seismic waves travel slowly. The mantle materials that surround these anomalous regions are thought to be composed of cooler rocks associated with downward advection of former oceanic tectonic plates. However, the origin and composition of the anomalous provinces is uncertain. These zones have long been depicted as warmer-than-average mantle materials related to convective upwelling. Yet, they may also be chemically distinct from the surrounding mantle, and potentially partly composed of subducted or primordial material, and have therefore been termed thermochemical piles. From seismic, geochemical and mineral physics data, the emerging view is that these thermochemical piles appear denser than the surrounding mantle materials, are dynamically stable and long-lived, and are shaped by larger-scale mantle flow. Whether remnants of a primordial layer or later accumulations of more-dense materials, the composition of the piles is modified over time by stirring and by chemical reactions with material from the surrounding mantle, underlying core and potentially from volatile elements transported into the deep Earth by subducted plates. Upwelling mantle plumes may originate from the thermochemical piles, so the unusual chemical composition of the piles could be the source of distinct trace-element signatures observed in hotspot lavas.
Geochimica et Cosmochimica Acta, in press available 78p.
Mantle
Bulk chemistry
Abstract: The composition of the fine-grained matrix of glacial diamictites from the Mesoarchean, Paleoproterozoic, Neoproterozoic, and Paleozoic, collected from four modern continents, reflect the secular evolution of the average composition of the upper continental crust (UCC). The effects of localized provenance are present in some cases, but distinctive geochemical signatures exist in diamictites of the same age from different localities, suggesting that these are global signatures. Archean UCC, dominated by greenstone basalts and less so komatiites, was more mafic, based on major elements and transition metal trace elements. Temporal changes in oxygen isotope ratios, rare earth elements, and high field strength elements indicate that the UCC became more differentiated and that tonalite-trondhjemite-granodiorite suites became less important with time, findings consistent with previous studies. We also document the concentrations of siderophile and chalcophile elements (Ga, Ge, Cd, In, Sn, Sb, W, Tl, Bi) and lithophile Be in the UCC through time, and use the data for the younger diamictites to construct a new estimate of average UCC along with associated uncertainties.
Abstract: This article reviews the development of mineralogy as a science by focusing largely on the common silicate garnets of general formula {X3}[Y2](Si3)O12. It tells of important discoveries, analyses, and proposals by various scientists relating to crystallography, crystal structures, isomorphism, and solid solution starting in Europe in the late 1700s. The critical recognition of the importance of ionic size of atoms in determining crystal-chemical properties and solid-solution behavior is emphasized. The two garnet species “pyralspite” and “(u)grandite,” which were considered to represent two independent solid-solution series, were introduced by N.H. Winchell and A.N. Winchell (1927) in their well-known book Elements of Optical Mineralogy. Critical comments on the assumptions behind the classification scheme have been pointed out for at least 50 yr, but it remains in use. There is more, though, behind this garnet classification scheme than just simple terminology. There are a long series of scientific discoveries and advances that are largely forgotten by the broader mineralogical community. They begin, here, with the work of the “father of crystallography,” René-Just Haüy, concerning the microscopic nature of crystals around 1780 and include later discoveries and proposals by Mitscherlich, Beudant, Wollaston, and Kopp relating to isomorphism and solid-solution behavior all before 1850. A second key era started with the discovery of X-ray diffraction in 1912 that allowed the atomic structures of crystals and, furthermore, atomic and ion radii to be determined. In terms of isomorphism and solid solution, the proposals and studies of Vegard, Zambonini, Wherry, A.N. Winchell, and the “father of crystal chemistry” Goldschmidt are briefly discussed. The recognition of the sizes of atoms and ions, along with an understanding of chemical bonding behavior in crystals, was critical in the establishment of what can be termed “modern mineralogy,” a quantitative science as it is largely understood today that emerged by the mid-1930s. The silicate garnet system pyrope-almandine-spessartine-grossular-andradite-uvarovite shows extensive homovalent substitutional solid solution over two structural sites and complete compositional variation between “pyralspite species” and “ugrandite species” has been documented. Thus, the prerequisites behind the terms “pyralspite” and “(u)grandite,” as originally formulated and often accepted even today, are incorrect and use of this classification is not recommended. Diffraction determinations of the volumes of garnet end-members and volumes of mixing of garnet solid solutions give physical insight into solid-solution behavior. Today, investigations of local structural and crystal-chemical properties, together with determinations of lattice strain and thermodynamic mixing properties, of silicate solid solutions are leading to an ever more quantitative understanding of mineral behavior from the microscopic to macroscopic level.
Abstract: We present a new approach to model planetary accretion and continuous core formation, and discuss the implications if Earth accreted under conditions initially more oxidized than the modern day mantle. The modified model uses the same partitioning data that were previously used to model accretion under reducing conditions, however, changing the partitioning between accreting metal and silicate mantle means that reducing conditions fail to meet expected core/mantle values. Instead, the model requires conditions more oxidized than the modern day mantle to converge and to yield expected elemental core/mantle distribution values for moderately siderophile elements. The initial oxygen fugacity required to provide the crucial level of oxidation is approximately ?IW ~ ?1.2 to ?1.7 and thus is in the range of carbonaceous and ordinary chondrites. The range of peak pressures for metal silicate partitioning is 60-6 GPa and oxygen fugacity must decrease to meet modern FeO mantle contents as accretion continues. Core formation under oxidizing conditions bears some interesting consequences for the terrestrial Si budget. Although the presented partitioning model can produce a Si content in the core of 5.2 wt%, oxidizing accretion may limit this to a maximum of ~3.0 to 2.2 wt%, depending on the initial fO2 in BSE, which places bulk earth Mg/Si ratio between 0.98-1.0. In addition, under oxidizing conditions, Si starts partitioning late during accretion, e.g., when model earth reached >60% of total mass. As a consequence, the high P-T regime reduces the accompanied isotope fractionation considerably, to 0.07‰ for 5.2 wt% Si in the core. The isotope fractionation is considerably less, when a maximum of 3.0 wt% in the core is applied. Under oxidizing conditions it becomes difficult to ascertain that the Si isotope composition of BSE is due to core-formation only. Bulk Earth’s Si isotope composition is then not chondritic and may have been inherited from Earth’s precursor material.
Abstract: During Neoproterozoic Snowball Earth glaciations, the oceans gained massive amounts of alkalinity, culminating in the deposition of massive cap carbonates on deglaciation. Changes in terrestrial runoff associated with both breakup of the Rodinia supercontinent and deglaciation can explain some, but not all of the requisite changes in ocean chemistry. Submarine volcanism along shallow ridges formed during supercontinent breakup results in the formation of large volumes of glassy hyaloclastite, which readily alters to palagonite. Here we estimate fluxes of calcium, magnesium, phosphorus, silica and bicarbonate associated with these shallow-ridge processes, and argue that extensive submarine volcanism during the breakup of Rodinia made an important contribution to changes in ocean chemistry during Snowball Earth glaciations. We use Monte Carlo simulations to show that widespread hyaloclastite alteration under near-global sea-ice cover could lead to Ca2+ and Mg2+ supersaturation over the course of the glaciation that is sufficient to explain the volume of cap carbonates deposited. Furthermore, our conservative estimates of phosphorus release are sufficient to explain the observed P:Fe ratios in sedimentary iron formations from this time. This large phosphorus release may have fuelled primary productivity, which in turn would have contributed to atmospheric O2 rises that followed Snowball Earth episodes.
Abstract: The thermophysical properties of silicate melts and glasses are of fundamental importance for the characterization of the dynamics and energetics of silicate melts on Earth and terrestrial planets. The heat capacity of silicate melts is of particular importance because of its implications for the temperature dependencies of melt enthalpy and entropy and for the potential relationship to melt structure and transport properties. Currently, there are reliable models for predicting the heat capacity of simple and multicomponent silicate glasses (Cpglass) as a function of composition and temperature. Recent differential scanning calorimetry (DSC) measurements of heat capacity for multicomponent silicate liquid (Cpliquid), however, have shown that published models do not accurately reproduce heat capacity measurements on some silicate melts. Here, we have compiled a database of heat capacity values for hydrous and anhydrous multicomponent natural samples. The measurements are on pairs of glasses and melts over the compositional range (wt%) of: SiO2 (44-79), Al2O3 (5-35), TiO2 (0-3), FeOtot (0 ? 11); Na2O + K2O (0-27); CaO + MgO (0-39), H2O (0-6.3) and minor oxides. The compiled data show strong correlations between silica content (XSiO2) and the configurational heat capacity (Cpconfig) defined as Cpliquid ? Cpglass measured across the glass transition temperature (Tg). This correlation is used to establish an empirical model for predicting Cpliquid as a function of melt composition (i.e. SiO2 content) and values of Cpglass measured at the onset of the glass transition: Cpliquid=52.6-55.88XSiO2+CpglassCpliquid=52.6-55.88XSiO2+Cpglass. The model reproduces values of Cpliquid to within an average relative error of ~ 2.4%. Published models for the heat capacities of silicate melts (e.g., Stebbins, 1984; Richet and Bottinga, 1985; Lange and Navrotsky, 1992) applied to the same dataset have average relative errors in excess of 5.5%.
Abstract: Rheological properties of the lower mantle have strong influence on the dynamics and evolution of Earth. By using the improved methods of quantitative deformation experiments at high pressures and temperatures, we deformed a mixture of bridgmanite and magnesiowüstite under the shallow lower mantle conditions. We conducted experiments up to about 100% strain at a strain rate of about 3 × 10(-5) second(-1). We found that bridgmanite is substantially stronger than magnesiowüstite and that magnesiowüstite largely accommodates the strain. Our results suggest that strain weakening and resultant shear localization likely occur in the lower mantle. This would explain the preservation of long-lived geochemical reservoirs and the lack of seismic anisotropy in the majority of the lower mantle except the boundary layers.
Abstract: Kimberlite magmas are of economic and scientific importance because they represent the major host to diamonds and are probably the deepest magmas from continental regions. In addition, kimberlite magmas transport abundant mantle and crustal xenoliths, thus providing fundamental information on the composition of the sub-continental lithosphere. Despite their importance, the composition and ascent mechanism(s) of kimberlite melts remain poorly constrained. Phlogopite is one of the few minerals that preserves a history of fluid migration and magmatism in the mantle and crust and is therefore an invaluable petrogenetic indicator of kimberlite magma evolution. Here we present major and trace element compositional data for phlogopite from the Bultfontein kimberlite (Kimberley, South Africa; i.e. the kimberlite type-locality) and from entrained mantle xenoliths. Phlogopite macrocrysts (~ > 0.3-0.5 mm) and microcrysts (between ~ 0.1 and 0.3 mm) in the Bultfontein kimberlite display concentric compositional zoning patterns. The cores of these phlogopite grains exhibit compositions typical of phlogopite contained in peridotite mantle xenoliths. However, the rims of some grains show compositions analogous to kimberlite groundmass phlogopite (i.e. high Ti, Al and Ba; low Cr), whereas other rims and intermediate zones (between cores and rims) exhibit unusually elevated Cr and lower Al and Ba concentrations. The latter compositions are indistinguishable from matrix phlogopite in polymict breccia xenoliths (considered to represent failed kimberlite intrusions) and from Ti-rich overgrowth rims on phlogopite in other mantle xenoliths. Consequently, it is likely that these phlogopite grains crystallized from kimberlite melts and that the high Ti-Cr zones originated from earlier kimberlite melts at mantle depths. We postulate that successive pulses of ascending kimberlite magma progressively metasomatised the conduit along which later kimberlite pulses ascended, producing progressively decreasing interaction with the surrounding mantle rocks. In our view, these processes represent the fundamental mechanism of kimberlite magma ascent. Our study also indicates that, in addition to xenoliths/xenocrysts and magmatic phases, kimberlite rocks incorporate material crystallized at various mantle depths by previous kimberlite intrusions (mantle-derived ‘antecrysts’).
Abstract: The petrogenesis of kimberlites commonly is obscured by interaction with hydrothermal fluids, including deuteric (late-magmatic) and/or groundwater components. To provide new constraints on the modification of kimberlite rocks during overprinting by such fluids and on the fractionation of kimberlite magmas during crystallisation, we have undertaken a detailed petrographic and geochemical study of a hypabyssal sample (BK) from the Bultfontein kimberlite (Kimberley, South Africa).
Abstract: Establishing the history of HP and UHP metamorphic rocks is important for quantifying Earth dynamics. The history of these rocks defines, among other things, paleo-subduction rates, P-T paths, and the kinematics of continent-continent collision. Although the appearance of certain minerals, such as coesite, stishovite, or diamond, provides unequivocal evidence of an HP or UHP component to the history of a rock, they cannot provide details of the P-T-t path a rock has experienced. However, complex solid solutions can. This reflects the fact that solid solutions have the potential to provide a continuous thermodynamically controlled response to evolving P-T conditions. To the extent that such solid-solution characteristics are preserved unmodified in a mineral throughout its history, a detailed description of the trajectory of the rock during burial …
Contributions to Mineralogy and Petrology, in press available, 17p.
Mantle
Peridotite
Abstract: Natural moissanite (SiC) is reported from mantle-derived samples ranging from lithospheric mantle keel diamonds to serpentinites to podiform chromitites in ophiolites related to suprasubduction zone settings (Luobusa, Dongqiao, Semail, and Ray-Iz). To simulate ultra-reducing conditions and the formation of moissanite, we compiled thermodynamic data for alloys (Fe-Si-C and Fe-Cr), carbides (Fe3C, Fe7C3, SiC), and Fe-silicides; these data were augmented by commonly used thermodynamic data for silicates and oxides. Computed phase diagram sections then constrain the P-T-fO2 conditions of SiC stability in the upper mantle. Our results demonstrate that: Moissanite only occurs at oxygen fugacities 6.5-7.5 log units below the iron-wustite buffer; moissanite and chromite cannot stably coexist; increasing pressure does not lead to the stability of this mineral pair; and silicates that coexist with moissanite have X Mg > 0.99. At upper mantle conditions, chromite reduces to Fe-Cr alloy at fO2 values 3.7-5.3 log units above the moissanite-olivine-(ortho)pyroxene-carbon (graphite or diamond) buffer (MOOC). The occurrence of SiC in chromitites and the absence of domains with almost Fe-free silicates suggest that ultra-reducing conditions allowing for SiC are confined to grain scale microenvironments. In contrast to previous ultra-high-pressure and/or temperature hypotheses for SiC origin, we postulate a low to moderate temperature mechanism, which operates via ultra-reducing fluids. In this model, graphite-/diamond-saturated moderately reducing fluids evolve in chemical isolation from the bulk rock to ultra-reducing methane-dominated fluids by sequestering H2O into hydrous phases (serpentine, brucite, phase A). Carbon isotope compositions of moissanite are consistent with an origin of such fluids from sediments originally rich in organic compounds. Findings of SiC within rocks mostly comprised by hydrous phases (serpentine + brucite) support this model. Both the hydrous phases and the limited diffusive equilibration of SiC with most minerals in the rocks indicate temperatures below 700-800 °C. Moissanite from mantle environments is hence a mineral that does not inform on pressure but on a low to moderate temperature environment involving ultra-reduced fluids. Any mineral in equilibrium with SiC could only contain traces of Fe2+ or Cr3+.
REM: Revista Escola de Minas, Vol. 68, 3, pp. 279-285.
Africa
Kimberley Process
Abstract: After more than a decade since its creation, the KPCS is undergoing questioning as to efficiency in combating the irregular trade of diamonds, among the countries with significant production for the global market, mainly Angola, the Democratic Republic of the Congo and Zimbabwe. Governments and institutions are considering it to be conducive to serious violations of human rights. In Brazil all activities of the sector have been reduced drastically. It is estimated that there has been a loss in Brazilian production, after implementation of the KPCS rules, in the order of 8.1 million Kts, valued at more than $ 2.0 billion.
Physics of the Earth and Planetary Interiors, Vol. 247, pp. 11-16.
Mantle
Experimental Petrology
Abstract: Lattice thermal conductivity of ferropericlase and radiative thermal conductivity of iron bearing magnesium silicate perovskite (bridgmanite) - the major mineral of Earth’s lower mantle- have been measured at room temperature up to 30 and 46 GPa, respectively, using time-domain thermoreflectance and optical spectroscopy techniques in diamond anvil cells. The results provide new constraints for the pressure dependencies of the thermal conductivities of Fe bearing minerals. The lattice thermal conductivity of ferropericlase Mg0.9Fe0.1O is 5.7(6) W/(m * K) at ambient conditions, which is almost 10 times smaller than that of pure MgO; however, it increases with pressure much faster (6.1(7)%/GPa vs 3.6(1)%/GPa). The radiative conductivity of a Mg0.94Fe0.06SiO3 bridgmanite single crystal agrees with previously determined values for powder samples at ambient pressure; it is almost pressure-independent in the investigated pressure range. Our results confirm the reduced radiative conductivity scenario for the Earth’s lower mantle, while the assessment of the heat flow through the core-mantle boundary still requires in situ measurements at the relevant pressure-temperature conditions.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 431-458.
Mantle
Magmatism
Abstract: Magma fragmentation is the breakup of a continuous volume of molten rock into discrete pieces, called pyroclasts. Because magma contains bubbles of compressible magmatic volatiles, decompression of low-viscosity magma leads to rapid expansion. The magma is torn into fragments, as it is stretched into hydrodynamically unstable sheets and filaments. If the magma is highly viscous, resistance to bubble growth will instead lead to excess gas pressure and the magma will deform viscoelastically by fracturing like a glassy solid, resulting in the formation of a violently expanding gas-pyroclast mixture. In either case, fragmentation represents the conversion of potential energy into the surface energy of the newly created fragments and the kinetic energy of the expanding gas-pyroclast mixture. If magma comes into contact with external water, the conversion of thermal energy will vaporize water and quench magma at the melt-water interface, thus creating dynamic stresses that cause fragmentation and the release of kinetic energy. Lastly, shear deformation of highly viscous magma may cause brittle fractures and release seismic energy.
Abstract: Subduction of heterogeneous lithologies (sediments and altered basalts) carries a mixture of volatile components (H2O ± CO2) into the mantle, which are later mobilized during episodes of devolatilization and flux melting. Several petrologic and thermodynamic studies investigated CO2 decarbonation to better understand carbon cycling at convergent margins. A paradox arose when investigations showed little to no decarbonation along present day subduction geotherms at subarc depths despite field based observations. Sediment diapirism is invoked as one of several methods for carbon transfer from the subducting slab. We employ high-resolution 2D petrological-thermomechanical modeling to elucidate the role subduction dynamics has with respect to slab decarbonation and the sediment diapirism hypothesis. Our thermodynamic database is modified to account for H2O-CO2 binary fluids via the following lithologies: GLOSS average sediments (H2O: 7.29 wt.% & CO2: 3.01 wt.%), carbonated altered basalts (H2O: 2.63 wt.% & CO2: 2.90 wt.%), and carbonated peridotites (H2O: 1.98 wt.% & CO2: 1.50 wt.%). We include a CO2 solubility P-x[H2O wt.%] parameterization for sediment melts. We parameterize our model by varying two components: slab age (20, 40, 60, 80 Ma) and convergence velocity (1, 2, 3, 4, 5, 6 cm year? 1). 59 numerical models were run and show excellent agreement with the original code base. Three geodynamic regimes showed significant decarbonation. 1) Sedimentary diapirism acts as an efficient physical mechanism for CO2 removal from the slab as it advects into the hotter mantle wedge. 2) If subduction rates are slow, frictional coupling between the subducting and overriding plate occurs. Mafic crust is mechanically incorporated into a section of the lower crust and undergoes decarbonation. 3) During extension and slab rollback, interaction between hot asthenosphere and sediments at shallow depths result in a small window (~ 12.5 Ma) of high integrated CO2 fluxes (205 kg m? 3 Ma? 1).
Depositional evolution of southwest Gondwana Neoproterozoic paleobasins based on Sr, C and O isotopic compositions of carbonatic rocks from the Sul-Riograndense shield, Brazil.
Doklady Earth Sciences, Vol. 465, 2, pp. 1297-1301.
Russia, Siberia
Deposit - Malokuonapskaya
Abstract: The U-Pb (SHRIMP) age was determined for zircons collected from 26 observation and sampling sites of diamonds and index minerals in the northeastern Siberian Platform. This part of the region hosts 15 low-diamondiferous Paleozoic and Mesozoic kimberlite fields, excluding the near economic Triassic Malokuonapskaya pipe in the Kuranakh field. Four epochs of kimberlite formation (Silurian, Late Devonian to Early Carboniferous, Middle to Late Triassic, and Middle to Late Jurassic) of the Siberian Platform, including its northeastern part, are confirmed as a result of our studies. Most observation points, including economic Quaternary diamond placers, contain Middle to Late Triassic zircons, which confirms the abundant Late Triassic volcanism in this region. The positive correlation of diamonds and major index minerals of kimberlites (mostly, garnets) at some observation sites indicates the possible Triassic age of the predictable diamondiferous kimberlites.
Physics and Chemistry of Minerals, Vol. 42, pp. 95-102.
Mantle
Peridotite
Abstract: For over 50 years, the use of high-pressure piston/cylinder apparatus combined with an increasing diversity of microbeam analytical techniques has enabled the study of mantle peridotite compositions and of magmas derived by melting in the upper mantle. The experimental studies have been guided by the petrology and geochemistry of peridotites from diverse settings and by the remarkable range of mantle-derived magma types. Recent experimental study using FTIR spectroscopy to monitor water content of minerals has shown that fertile lherzolite (MORB-source upper mantle) at ~1,000 °C can store ~200 ppm H2O in defect sites in nominally anhydrous minerals (olivine, pyroxenes, garnet and spinel). Water in excess of 200 ppm stabilizes amphibole (pargasite) at P < 3 GPa up to the lherzolite solidus. However, at P > 3 GPa, water in excess of 200 ppm appears as an aqueous vapour phase and this depresses the temperature of the upper mantle solidus. Provided the uppermost mantle (lithosphere) has H2O < 4,000 ppm, the mantle solidus has a distinctive P, T shape. The temperature of the vapour-undersaturated or dehydration solidus is approximately constant at 1,100 °C at pressures up to ~3 GPa and then decreases sharply to ~1,010 °C. The strongly negative dT/dP of the vapour-undersaturated solidus of fertile lherzolite from 2.8 to 3 GPa provides the basis for understanding the lithosphere/asthenosphere boundary. Through upward migration of near-solidus hydrous silicate melt, the asthenosphere becomes geochemically zoned with the ‘enriched’ intraplate basalt source (>500 ppm H2O) overlying the ‘depleted’ MORB source (~200 ppm H2O). From the study of primitive MOR picrites, the modern mantle potential temperature for MORB petrogenesis is ~1,430 °C. The intersection of the 1,430 °C adiabat with the vapour-saturated lherzolite solidus at ~230 km suggests that upwelling beneath mid-ocean ridges begins around this depth. In intraplate volcanism, diapiric upwelling begins from shallower depths and lower temperatures within the asthenosphere and the upwelling lherzolite is enriched in water, carbonate and incompatible elements. Magmas including olivine melilitites, olivine nephelinites, basanites, alkali picrites and tholeiitic picrites are consequences of increasing melt fraction and decreasing pressure at melt segregation. Major element, trace element and isotopic characteristics of island chain or ‘hot-spot’ magmas show that they sample geochemically distinct components in the upper mantle, differing from MORB sources. There is no evidence for higher-temperature ‘hot-spot’ magmas, relative to primitive MORB, but there is evidence for higher water, CO2 and incompatible element contents. The distinctive geochemical signatures of ‘hot-spot’ magmas and their ‘fixed’ position and long-lived activity relative to plate movement are attributed to melt components derived from melting at interfaces between old, oxidised subducted slabs (suspended beneath or within the deeper asthenosphere) and ambient, reduced mantle. In convergent margin volcanism, the inverted temperature gradients inferred for the mantle wedge above the subducting lithosphere introduce further complexity which can be explored by overlaying the phase relations of appropriate mantle and crustal lithologies. Water and carbonate derived from the subducted slab play significant roles, magmas are relatively oxidised, and distinctive primary magmas such as boninites, adakites and island arc ankaramites provide evidence for fluxing of melting in refractory harzburgite to lherzolite by slab-derived hydrous adakitic melt and by wedge-derived carbonatite.
Abstract: Primary or parental magmas act as probes to infer eruption and source temperatures for both mid-ocean ridge (MOR) and ‘hot-spot’ magmas (tholeiitic picrites). The experimental petrogenetic constraints (‘inverse’ experiments) argue for no significant temperature differences between them. However, there are differences in major, minor and trace elements which characterise geochemical, not thermal, anomalies beneath ‘hot-spots’. We suggest that diapiric upwelling from interfaces (redox contrasts) between old subducted slab and normal MOR basalt source mantle is the major reason for the observed characteristics of island chain or ‘hot-spot’ volcanism. Intraplate basalts also include widely distributed volcanic centres containing lherzolite xenoliths, i.e. mantle-derived magmas. Inverse experiments on olivine basalt, alkali olivine basalt, olivine basanite, olivine nephelinite, olivine melilitite and olivine leucitite (lamproite) determined liquidus phases as a function of pressure, initially under anhydrous and CO2-absent conditions. Under C- and H-absent conditions, only tholeiites to alkali olivine basalts had Ol + Opx ± Cpx as high-pressure liquidus phases. Addition of H2O accessed olivine basanites at 2.5-3 GPa, ~1,200 °C, but both CO2 and H2O were necessary to obtain saturation with Ol, Opx, Cpx and Ga at 2.5-3.5 GPa for olivine nephelinite and olivine melilitite. The forward and inverse experimental studies are combined to formulate a petrogenetic grid for intraplate, ‘hot-spot’ and MOR magmatism within the plate tectonics paradigm. The asthenosphere is geochemically zoned by slow upward migration of incipient melt. The solidus and phase stabilities of lherzolite with very small water contents (<3,000 ppm) determine the thin plate behaviour of the oceanic lithosphere and thus the Earth’s convection in the form of plate tectonics. There is no evidence from the parental magmas of MOR and ‘hot-spots’ to support the ‘deep mantle thermal plume’ hypothesis. The preferred alternative is the presence of old subducted slabs, relatively buoyant and oxidised with respect to MORB source mantle and suspended or upwelling in or below the lower asthenosphere (and thus detached from overlying plate movement).
Abstract: Large peridotite massifs are scattered along the 1500?km length of the Yarlung-Zangbo Suture Zone (southern Tibet, China), the major suture between Asia and Greater India. Diamonds occur in the peridotites and chromitites of several massifs, together with an extensive suite of trace phases that indicate extremely low fO2 (SiC, nitrides, carbides, native elements) and/or ultrahigh pressures (UHP) (diamond, TiO2 II, coesite, possible stishovite). New physical and isotopic (C, N) studies of the diamonds indicate that they are natural, crystallized in a disequilibrium, high-T environment, and spent only a short time at mantle temperatures before exhumation and cooling. These constraints are difficult to reconcile with previous models for the history of the diamond-bearing rocks. Possible evidence for metamorphism in or near the upper part of the Transition Zone includes the following: (1) chromite (in disseminated, nodular and massive chromitites) containing exsolved pyroxenes and coesite, suggesting inversion from a high-P polymorph of chromite; (2) microstructural studies suggesting that the chromitites recrystallized from fine-grained, highly deformed mixtures of wadsleyite and an octahedral polymorph of chromite; (3) a new cubic Mg-silicate, with the space group of ringwoodite but an inverse-spinel structure (all Si in octahedral coordination); (4) harzburgites with coarsely vermicular symplectites of opx + Cr-Al spinel ± cpx; reconstructions suggest that these are the breakdown products of majoritic garnets, with estimated minimum pressures to?>?13?GPa. Evidence for a shallow pre-metamorphic origin for the chromitites and peridotites includes the following: (1) trace-element data showing that the chromitites are typical of suprasubduction-zone (SSZ) chromitites formed by magma mixing or mingling, consistent with Hf-isotope data from magmatic (375?Ma) zircons in the chromitites; (2) the composition of the new cubic Mg-silicate, which suggests a low-P origin as antigorite, subsequently dehydrated; (3) the peridotites themselves, which carry the trace element signature of metasomatism in an SSZ environment, a signature that must have been imposed before the incorporation of the UHP and low-fO2 phases. A proposed P-T-t path involves the original formation of chromitites in mantle-wedge harzburgites, subduction of these harzburgites at c. 375?Ma, residence in the upper Transition Zone for >200 Myr, and rapid exhumation at c. 170-150?Ma or 130-120?Ma. Os-isotope data suggest that the subducted mantle consisted of previously depleted subcontinental lithosphere, dragged down by a subducting oceanic slab. Thermomechanical modeling shows that roll-back of a (much later) subducting slab would produce a high-velocity channelized upwelling that could exhume the buoyant harzburgites (and their chromitites) from the Transition Zone in?
Abstract: This ending talk, focused on the ongoing cooperative research of Prof. Griffin and his team at Macquarie University and Shefa Yamim, since January 2014, highlighting unique corundum species characteristics. Preliminary results of this research were presented in the IGS Annual Meeting of 2015, whereas this year Prof. Griffin has shared innovative findings only microscopically tracked within titanium-rich corundum aggregates. One of the more abundant minerals is Tistarite (Ti2O3), previously known only as a single grain in a primitive type of meteorite (!). An article has been submitted to a scientific journal detailing this first terrestrial occurrence. Several other minerals are common in meteorites, but unknown or extremely rare on Earth. About half of these minerals are unknown to science, and will be described as new minerals in the scientific literature. The first of these is a Titanium-Aluminium-Zirconium oxide, informally known as TAZ; it will be submitted to the International Mineralogical Association for recognition as a new mineral, ShefaTAZite. Using state of the art technologies such as Thermal Ionisation Mass Spectrometry (TIMS) and Electron Microscopy Facility (EMF) that has three scanning electron microscopes, all with EBSD capability, and a transmission electron microscope - Prof. Griffin revealed spectacular imagery of minerals and rare compounds associated with titanium rich corundum aggregates.
Abstract: The minimum oxygen fugacity (fO2) of Earth's upper mantle probably is controlled by metal saturation, as defined by the iron-wüstite (IW) buffer reaction (FeO ? Fe + O). However, the widespread occurrence of moissanite (SiC) in kimberlites, and a suite of super-reduced minerals (SiC, alloys, native elements) in peridotites in Tibet and the Polar Urals (Russia), suggest that more reducing conditions (fO2 = 6-8 log units below IW) must occur locally in the mantle. We describe pockets of melt trapped in aggregates of corundum crystals ejected from Cretaceous volcanoes in northern Israel which contain high-temperature mineral assemblages requiring extremely low fO2 (IW < -10). One abundant phase is tistarite (Ti2O3), previously known as a single grain in the Allende carbonaceous chondrite (Mexico) and believed to have formed during the early evolution of the solar nebula. It is associated with other reduced phases usually found in meteorites. The development of super-reducing conditions in Earth's upper mantle may reflect the introduction of CH4 + H2 fluids from the deep mantle, specifically related to deep-seated volcanic plumbing systems at plate boundaries.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 167-205.
Mantle
Magmatism
Abstract: The composition of much of Earth's lower continental crust is enigmatic. Wavespeeds require that 10 -20% of the lower third is mafic, but the available heat-flow and wavespeed constraints can be satisfied if lower continental crust elsewhere contains anywhere from 49 to 62 wt% SiO2. Thus, contrary to common belief, the lower crust in many regions could be relatively felsic, with SiO2 contents similar to andesites and dacites. Most lower crust is less dense than the underlying mantle, but mafic lowermost crust could be unstable and likely delaminates beneath rifts and arcs. During sediment subduction, subduction erosion, arc subduction, and continent subduction, mafic rocks become eclogites and may continue to descend into the mantle, whereas more silica-rich rocks are transformed into felsic gneisses that are less dense than peridotite but more dense than continental upper crust. These more felsic rocks may rise buoyantly, undergo decompression melting and melt extraction, and be relaminated to the base of the crust. As a result of this refining and differentiation process, such relatively felsic rocks could form much of Earth's lower crust.
Abstract: Spinel is ubiquitous as a rock-forming mineral in terrestrial, lunar, and planetary basalts and closely associated meteoritic equivalents. A major unknown is whether these rocks formed under similar conditions of partial melting of primary or modified mantle, whether redox environments played a role in evolutionary trends, and did mineral crystal chemistry have any influence on elemental partition between solids and liquids? In a novel approach by Papike et al. (2015), spinel is used as an informative, albeit complex indicator of oxygen fugacity, site occupancy of multiple valence elements, and spinel structural types. Planetary basalts may be reduced (IW-3), oxidized (Earth at FMQ), or of intermediate redox state (Mars). Taking an expansive view, the spinel approach holds enormous promise in understanding the magmatic differentiation of asteroids.
Abstract: The Okorusu Alkaline Igneous-Carbonatite Complex is located about 50 km north of Otjiwarongo in North-Central Namibia. The complex was intruded during early Cretaceous into late Precambrian Damaran Series metasedimentary rocks. It is nearly circular in plan view with a diameter of about 8 km. Coarse-grained nepheline syenites and foyaites are exposed in low hills near the northern edge of the complex. Early alkalie-rich fluids pervasively fenitized the metasedimentary rocks along the southern margin of the complex forming an east-west ridge of resistant hills that include Okorusu Mountain. The fenites were subsequently brecciated and intruded by several carbonatites, especially medium-grained iron-rich diopside pyroxene carbonitite and very coarse-grained pegmatitic carbonatite. In addition to predominant calcite, the carbonatites contain titaniferous vanadiferous magnetite crystals and diopside crystals as large as one-third meter and hexagonal pyrrhotite crystals as long as one meter. For the past two decades, Okoruru has been the leading carbonatite-related fluorspar producer in the world. Fluorspar has been mined from five separate ore deposits in open pits A, B, C, D, and E. The deposits formed principally by the replacement of carbonatite as shown by local unreplaced remnants of carbonatite in the fluorspar ores, goethite pseudomorphs in fluorspar ores after carbonatite magnetite, diopside, and pyrrhotite crystals, transitions of the ores into carbonatite, and by elevated phosphorus contents resulting from carbonatite apatite crystals that were incompletely replaced by fluorite. Locally, marbles also are replaced by fluorite to form fluorspar ores that are distinguished from carbonatite-replacement fluorspar ores by their finer grain size and lack of phosphorus contents. Fluid inclusions in the fluorite crystals indicate that the fluorspar ores were deposited from 166 to 128oC from fluids of low salinity with less than 5% NaCl equivalent. The genesis of the fluorspar ores is interpreted to have resulted from deeply circulated ground waters that dissolved fluorine from carbonatite at depth. The fluorine in those ore fluids combined with calcium released during the replacement of calcite in carbonatite and marbles at the sites of the fluorspar ore deposition.
Geochemistry, Exploration, Environment, Analysis, Vol. 16, pp. 62-84.
Canada, Northwest Territories
Kimberlite - Triple B mentioned
Abstract: In this study, results by direct portable XRF (‘pXRF’) on unsieved till samples were compared with those by established laboratory methods (aqua regia or fusion ICP-MS and ICP-ES) on the <0.063-mm fraction to determine if the application of direct pXRF in the field would serve as an acceptable guide for immediate follow-up work. Four test sites in Canada were chosen: the Halfmile Lake Cu-Pb-Zn VMS deposit; the intrusion-hosted W-Mo Sisson deposit; a Pb-Zn Mississippi Valley-type (MVT) deposit in the Pine Point district; and the Triple B kimberlite. Unsieved till samples from the GSC archive collection were used for this study and included samples from background areas, immediately overlying, and at various distances down-ice of each deposit. Ziploc® and Whirl-Pak® bags that were used to contain the samples in the field were tested for their properties of X-ray attenuation and contamination. In general, the performance of pXRF in the four test areas was very good where concentrations of elements of interest (indicator or pathfinder elements) were substantially above detection limits by this technique (in the low ppm range for many elements). The following elements, shown to be useful indicator elements (important constituents of the ore/commodity) or pathfinder elements (those associated with the commodity elements) by the established methodology, showed similar patterns by pXRF on the unsieved material: Zn, Cu, Pb, and As at Halfmile Lake; W, Mo, Cu, Zn, Pb, and As at the Sisson deposit; Zn, Pb, and Fe at Pine Point; and Ca, Sr, Cr, and Ni at Triple B. Pathfinder elements whose concentrations were too low for determination by pXRF include: Ag and Sb at Halfmile Lake; Ag and Cd at Sisson; Cd, S, and Se at Pine Point; and Co, Mg, P, U, and Th at Triple B. The high background for Bi by pXRF, equivalent to c. 50?ppm, and its noisy signal precluded its use at Halfmile Lake and Sisson. Elements which tended to show poor precision (three analyses each sample) by pXRF in some samples due to sample heterogeneity include Sn, V, and W. Mercury was erroneously reported for the majority of samples in the low ppm range by pXRF whereas its concentration in fact was in the low ppb range. Several Pb-, Zn- (c. 1% Pb, Zn) and Fe-rich (up to 16% Fe) samples demonstrated spectral interferences by: Pb on As, Th and Se; Zn on Cu; and Fe on Co. Results for six till samples analysed in Ziploc® and Whirl-Pak® bags showed that Ziploc® absorbs fewer low-energy photons and hence is preferable for determining light elements such as Si, K and Ca.
A 2169 Ma U-Pb baddeleyite age for the Otish gabbro, Quebec: implications for correlation of Proterozoic magmatic events and sedimentary seuences in the eastern Superior province.
Canadian Journal of Earth Sciences, Vol. 53, 2, pp. 119-128.
Abstract: Apatite fission track (AFT) and (U-Th)/He (AHe) thermochronometry data are reported and used to unravel the exhumation history of crystalline basement rocks from the elevated (>1000?m above sea level) but low-relief Tanzanian Craton. Coeval episodes of sedimentation documented within adjacent Paleozoic to Mesozoic basins of southern Tanzania and the Congo basin of the Democratic Republic of Congo indicate that most of the cooling in the basement rocks in Tanzania was linked to erosion. Basement samples were from an exploration borehole located within the craton and up to 2200?m below surface. Surface samples were also analyzed. AFT dates range between 317?±?33?Ma and 188?±?44?Ma. Alpha (Ft)-corrected AHe dates are between 433?±?24?Ma and 154?±?20?Ma. Modeling of the data reveals two important periods of cooling within the craton: one during the Carboniferous-Triassic (340-220?Ma) and a later, less well constrained episode, during the late Cretaceous. The later exhumation is well detected proximal to the East African Rift (70?Ma). Thermal histories combined with the estimated geothermal gradient of 9°C/km constrained by the AFT and AHe data from the craton and a mean surface temperature of 20°C indicate removal of up to 9?±?2?km of overburden since the end of Paleozoic. The correlation of erosion of the craton and sedimentation and subsidence within the Congo basin in the Paleozoic may indicate regional flexural geodynamics of the lithosphere due to lithosphere buckling induced by far-field compressional tectonic processes and thereafter through deep mantle upwelling and epeirogeny tectonic processes.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 105-138.
Mantle
Jadeites
Abstract: Jadeitite is a relatively rare, very tough rock composed predominantly of jadeite and typically found associated with tectonic blocks of high-pressure/low-temperature metabasaltic rocks (e.g., eclogite, blueschist) in exhumed serpentinite-matrix mélanges. Studies over the past ?20 years have interpreted jadeitite either as the direct hydrous fluid precipitate from subduction channel dewatering into the overlying mantle wedge or as the metasomatic replacement by such fluids of oceanic plagiogranite, graywacke, or metabasite along the channel margin. Thus, jadeitites directly sample and record fluid transport in the subduction factory and provide a window into this geochemical process that is critical to a major process in the Earth system. They record the remarkable transport of large ion lithophile elements, such as Li, Ba, Sr, and Pb, as well as elements generally considered more refractory, such as U, Th, Zr, and Hf. Jadeitite is also the precious form of jade, utilized since antiquity in the form of tools, adornments, and symbols of prestige.
Abstract: The Magnet Cove Alkaline Intrusive Complex contains several silica-undersaturated igneous rock types (e.g. nepheline syenite, ijolite, carbonatite) that form a concentric ring map pattern approximately 4.6 square miles in area. These rings, which are likely the result of several nearly contemporaneous magma injection events during the mid Cretaceous, become increasingly silica-undersaturated from rim to core, and have been previously mapped as separate geologic units. The outer ring contains nepheline syenite, the intermediate ring contains both garnet ijolite and garnet biotite ijolite, and the core contains carbonatite. Though the detailed modal mineralogy differs somewhat between the silicate (i.e. syenite and ijolite) rock types, they all have in common the presence of mica group minerals. The purpose of this study is to examine and characterize the diversity of mica group minerals found in the silica-undersaturated rocks of Magnet Cove. Syenite and ijolite rock samples were collected from several locations within the complex, and thin sections were prepared for petrographic and electron microscope analysis using facilities and equipment at the UALR Rock Preparation Laboratory. Overall mineralogy from these samples indicates the presence of potassium feldspar, plagioclase feldspar, several feldspathoid minerals (nepheline, sodalite, altered leucite), amphiboles, pyroxenes (primarily aegerine and aegerine-augite), black Ti-bearing garnets (melanite, schorlomite), and various opaque minerals (e.g. magnetite, pyrite). Previously, micas in these rocks have been labeled simply as “biotite”. However, the ranges of color (yellowish-brown to bluish-green), crystal size (millimeter to several centimeters in diameter), and crystal habit (clusters of euhedral grains) in hand sample and variable pleochroism, ranging interference colors, reaction coronas, and zoning in thin section indicate a more interesting and complex chemical history.
Earth and Planetary Science Letters, Vol. 446, pp. 137-148.
Mantle
Coesite, subduction
Abstract: The ability to accurately constrain the secular record of high- and ultra-high pressure metamorphism on Earth is potentially hampered as these rocks are metastable and prone to retrogression, particularly during exhumation. Rutile is among the most widespread and best preserved minerals in high- and ultra-high pressure rocks and a hitherto untested approach is to use mineral inclusions within rutile to record such conditions. In this study, rutiles from three different high- and ultrahigh-pressure massifs have been investigated for inclusions. Rutile is shown to contain inclusions of high-pressure minerals such as omphacite, garnet and high silica phengite, as well as diagnostic ultrahigh-pressure minerals, including the first reported occurrence of exceptionally preserved monomineralic coesite in rutile from the Dora -Maira massif. Chemical comparison of inclusion and matrix phases show that inclusions generally represent peak metamorphic assemblages; although rare prograde phases such as titanite, omphacite and corundum have also been identified implying that rutile grows continuously during prograde burial and traps mineralogic evidence of this evolution. Pressure estimates obtained from mineral inclusions, when used in conjunction with Zr-in-rutile thermometry, can provide additional constraints on the metamorphic conditions of the host rock. This study demonstrates that rutile is an excellent repository for high- and ultra-high pressure minerals and that the study of mineral inclusions in rutile may profoundly change the way we investigate and recover evidence of such events in both detrital populations and partially retrogressed samples.
Abstract: Volcanic hotspot tracks featuring linear progressions in the age of volcanism are typical surface expressions of plate tectonic movement on top of narrow plumes of hot material within Earth’s mantle1. Seismic imaging reveals that these plumes can be of deep origin2=probably rooted on thermochemical structures in the lower mantle3, 4, 5, 6. Although palaeomagnetic and radiometric age data suggest that mantle flow can advect plume conduits laterally7, 8, the flow dynamics underlying the formation of the sharp bend occurring only in the Hawaiian-Emperor hotspot track in the Pacific Ocean remains enigmatic. Here we present palaeogeographically constrained numerical models of thermochemical convection and demonstrate that flow in the deep lower mantle under the north Pacific was anomalously vigorous between 100 million years ago and 50 million years ago as a consequence of long-lasting subduction systems, unlike those in the south Pacific. These models show a sharp bend in the Hawaiian-Emperor hotspot track arising from the interplay of plume tilt and the lateral advection of plume sources. The different trajectories of the Hawaiian and Louisville hotspot tracks arise from asymmetric deformation of thermochemical structures under the Pacific between 100 million years ago and 50 million years ago. This asymmetric deformation waned just before the Hawaiian-Emperor bend developed, owing to flow in the deepest lower mantle associated with slab descent in the north and south Pacific.
Abstract: The growth and recycling of continental crust has resulted in the chemical and thermal modification of Earth's mantle, hydrosphere, atmosphere, and biosphere for ?4.0 b.y. However, knowledge of the protolith that gave rise to the first continents and whether the environment of formation was a subduction zone still remains unknown. Here, tonalite melts are formed in high P-T experiments in which primitive oceanic plateau starting material is used as an analogue for Eoarchean (3.6-4.0 Ga) oceanic crust generated at early spreading centers. The tonalites are produced at 1.6-2.2 GPa and 900-950 °C and are mixed with slab-derived aqueous fluids to generate melts that have compositions identical to that of Eoarchean continental crust. Our data support the idea that the first continents formed at ca. 4 Ga and subsequently, through the subduction and partial melting of ?30-45-km-thick Eoarchean oceanic crust, modified Earth's mantle and Eoarchean environments and ecosystems.
Abstract: The continental crust is the archive of Earth’s history. Its rock units record events that are heterogeneous in time with distinctive peaks and troughs of ages for igneous crystallization, metamorphism, continental margins, and mineralization. This temporal distribution is argued largely to reflect the different preservation potential of rocks generated in different tectonic settings, rather than fundamental pulses of activity, and the peaks of ages are linked to the timing of supercontinent assembly. Isotopic and elemental data from zircons and whole rock crustal compositions suggest that the overall growth of continental crust (crustal addition from the mantle minus recycling of material to the mantle) has been continuous throughout Earth’s history. A decrease in the rate of crustal growth ca. 3.0 Ga is related to increased recycling associated with the onset of plate tectonics. We recognize five stages of Earth’s evolution: (1) initial accretion and differentiation of the core/mantle system within the first few tens of millions of years; (2) generation of crust in a pre-plate tectonic regime in the period prior to 3.0 Ga; (3) early plate tectonics involving hot subduction with shallow slab breakoff over the period from 3.0 to 1.7 Ga; (4) Earth’s middle age from 1.7 to 0.75 Ga, characterized by environmental, evolutionary, and lithospheric stability; (5) modern cold subduction, which has existed for the past 0.75 b.y. Cycles of supercontinent formation and breakup have operated during the last three stages. This evolving tectonic character has likely been controlled by secular changes in mantle temperature and how that impacts on lithospheric behavior. Crustal volumes, reflecting the interplay of crust generation and recycling, increased until Earth’s middle age, and they may have decreased in the past ~1 b.y.
Abstract: Olivine is distinguished from all other minerals in providing a remarkable chemical narrative about magmatic processes that occurred in Earth’s crust, mantle, and core over the entire age of Earth history. Olivines in mantle peridotite have Ni contents and Mg numbers that were largely produced by equilibrium crystallization in an early turbulently convecting magma ocean; subsequent stages of partial melting operated to slightly elevate Ni and Mg number in residual olivines. Olivines from Archean komatiites from the Abitibi greenstone belt have Ni contents and Mg numbers that are consistent with an extensively melted peridotite source at great depths in the mantle. Olivines from basaltic oceanic crust, the Icelandic mantle plume and other Phanerozoic occurrences have compositions that record magma chamber crystallization, recharge, mixing, and partial melting. Olivines from the present-day Icelandic mantle plume have compositions that are consistent the melting of a peridotite source; unlike Hawaii, the melting of recycled crust as a distinct pyroxenite lithology is not evident in the olivine chemistry of Iceland. Paleocene picrites from Baffin Island and West Greenland from the ancient Icelandic plume have olivines with Ni contents that are consistent with either Ni-rich peridotite that formed by core-mantle interaction or by low-pressure crystallization of hot and deep magmas. In general, hot magma oceans, mantle plumes, and ambient mantle magmatism form in ways that are captured by the compositions of the olivine crystals that they contain.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, 11, Nov. pp. 3982-4005.
Mantle
Geophysics - seismic
Abstract: Seismic models provide constraints on the thermal and chemical properties of the cratonic upper mantle. Depth profiles of shear velocity from global and regional studies contain positive velocity gradients in the uppermost mantle and often lack a low-velocity zone, features that are difficult to reconcile with the temperature structures inferred from surface heat flow data and mantle-xenolith thermobarometry. Furthermore, the magnitude and shape of the velocity profiles vary between different studies, impacting the inferences drawn about mantle temperature and composition. In this study, forward modeling is used to identify the suite of one-dimensional shear-velocity profiles that are consistent with phase-velocity observations made for Rayleigh waves traversing Precambrian cratons. Two approaches to the generation of 1-D models are considered. First, depth profiles of shear velocity are predicted from thermal models of the cratonic upper mantle that correspond to a range of assumed values of mantle potential temperature, surface heat flow, and radiogenic heat production in the lithosphere. Second, shear velocity-depth profiles are randomly generated. In both cases, Rayleigh wave phase velocity is calculated from the Earth models, and acceptable models are identified on the basis of comparison to observed phase velocity. The results show that it is difficult but not impossible to find acceptable Earth models that contain a low-velocity zone in the upper mantle and that temperature structures that are consistent with constraints from mantle xenoliths yield phase-velocity predictions lower than observed. For most acceptable randomly generated Earth models, shear velocity merges with the global average at approximately 300 km.
Abstract: Using stable isotope data obtained on multiple aliquots of diamonds from worldwide sources, it has been argued that carbon and nitrogen in diamond are decoupled. Here we re-investigate the carbon-nitrogen relationship based on the most comprehensive microbeam data set to date of stable isotopes and nitrogen concentrations in diamonds (n = 94) from a single locality. Our diamond samples, derived from two kimberlites in the Chidliak Field (NE Canada), show large variability in ?13C (? 28.4 ‰ to ? 1.1‰, mode at ? 5.8‰), ?15N (? 5.8 to + 18.8‰, mode at ? 3.0‰) and nitrogen contents ([N]; 3800 to less than 1 at.ppm). In combination, cathodoluminescence imaging and microbeam analyses reveal that the diamonds grew from multiple fluid pulses, with at least one major hiatus documented in some samples that was associated with a resorption event and an abrupt change from low ?13C and [N] to mantle-like ?13C and high [N]. Overall, ?13C appears to be uncorrelated to ?15N and [N] on both the inter- and intra-diamond levels. Co-variations of ?15N-log[N], however, result in at least two parallel, negatively correlated linear arrays, which are also present on the level of the individual diamonds falling on these two trends. These arrays emerge from the two principal data clusters, are characterized by slightly negative and slightly positive ?15N (about ? 3 and + 2‰, respectively) and variable but overall high [N]. Using published values for the diamond-fluid nitrogen isotope fractionation factor and nitrogen partition coefficient, these trends are perfectly reproduced by a Rayleigh fractionation model. Overall, three key elements are identified in the formation of the diamond suite studied: (1.) a low ?13C and low [N] component that possibly is directly associated with an eclogitic diamond substrate or introduced during an early stage fluid event. (2.) Repeated influx of a variably nitrogen-rich mantle fluid (mildly negative ?13C and ?15N). (3.) In waning stages of influx, availability of the mantle-type fluid at the site of diamond growth became limited, leading to Rayleigh fractionation. These fractionation trends are clearly depicted by ?15N-[N] but are not detected when examining co-variation diagrams involving ?13C. Also on the level of individual diamonds, large (? 5‰) variations in ?15N are associated with ?13C values that typically are constant within analytical uncertainty. The much smaller isotope fractionation factor for carbon (considering carbonate- or methane-rich fluids as possible carbon sources) compared to nitrogen leads to an approximately one order of magnitude lower sensitivity of ?13C values to Rayleigh fractionation processes (i.e. during fractionation, a 1‰ change in ?13C is associated with a 10‰ change in ?15N). As a consequence, even minor heterogeneity in the primary isotopic composition of diamond forming carbon (e.g., due to addition of minor subducted carbon) will completely blur any possible co-variations with ?15N or [N]. We suggest this strong difference in isotope effects for C and N to be the likely cause of observations of an apparently decoupled behaviour of carbon and nitrogen isotopes in diamond.
Abstract: Using stable isotope data obtained on multiple aliquots of diamonds from worldwide sources, it has been argued that carbon and nitrogen in diamond are decoupled. Here we re-investigate the carbon-nitrogen relationship based on the most comprehensive microbeam data set to date of stable isotopes and nitrogen concentrations in diamonds (n = 94) from a single locality. Our diamond samples, derived from two kimberlites in the Chidliak Field (NE Canada), show large variability in ?13C (? 28.4 ‰ to ? 1.1‰, mode at ? 5.8‰), ?15N (? 5.8 to + 18.8‰, mode at ? 3.0‰) and nitrogen contents ([N]; 3800 to less than 1 at.ppm). In combination, cathodoluminescence imaging and microbeam analyses reveal that the diamonds grew from multiple fluid pulses, with at least one major hiatus documented in some samples that was associated with a resorption event and an abrupt change from low ?13C and [N] to mantle-like ?13C and high [N]. Overall, ?13C appears to be uncorrelated to ?15N and [N] on both the inter- and intra-diamond levels. Co-variations of ?15N-log[N], however, result in at least two parallel, negatively correlated linear arrays, which are also present on the level of the individual diamonds falling on these two trends. These arrays emerge from the two principal data clusters, are characterized by slightly negative and slightly positive ?15N (about ? 3 and + 2‰, respectively) and variable but overall high [N]. Using published values for the diamond-fluid nitrogen isotope fractionation factor and nitrogen partition coefficient, these trends are perfectly reproduced by a Rayleigh fractionation model. Overall, three key elements are identified in the formation of the diamond suite studied: (1.) a low ?13C and low [N] component that possibly is directly associated with an eclogitic diamond substrate or introduced during an early stage fluid event. (2.) Repeated influx of a variably nitrogen-rich mantle fluid (mildly negative ?13C and ?15N). (3.) In waning stages of influx, availability of the mantle-type fluid at the site of diamond growth became limited, leading to Rayleigh fractionation. These fractionation trends are clearly depicted by ?15N-[N] but are not detected when examining co-variation diagrams involving ?13C. Also on the level of individual diamonds, large (? 5‰) variations in ?15N are associated with ?13C values that typically are constant within analytical uncertainty. The much smaller isotope fractionation factor for carbon (considering carbonate- or methane-rich fluids as possible carbon sources) compared to nitrogen leads to an approximately one order of magnitude lower sensitivity of ?13C values to Rayleigh fractionation processes (i.e. during fractionation, a 1‰ change in ?13C is associated with a 10‰ change in ?15N). As a consequence, even minor heterogeneity in the primary isotopic composition of diamond forming carbon (e.g., due to addition of minor subducted carbon) will completely blur any possible co-variations with ?15N or [N]. We suggest this strong difference in isotope effects for C and N to be the likely cause of observations of an apparently decoupled behaviour of carbon and nitrogen isotopes in diamond.
Abstract: Convective circulation of the Earth’s mantle maintains some fraction of surface topography that varies with space and time. Most predictive models show that this dynamic topography has peak amplitudes of about ±2?km, dominated by wavelengths of 104?km. Here, we test these models against our comprehensive observational database of 2,120 spot measurements of dynamic topography that were determined by analysing oceanic seismic surveys. These accurate measurements have typical peak amplitudes of ±1?km and wavelengths of approximately 103?km, and are combined with limited continental constraints to generate a global spherical harmonic model, the robustness of which has been carefully tested and benchmarked. Our power spectral analysis reveals significant discrepancies between observed and predicted dynamic topography. At longer wavelengths (such as 104?km), observed dynamic topography has peak amplitudes of about ±500?m. At shorter wavelengths (such as 103?km), significant dynamic topography is still observed. We show that these discrepancies can be explained if short-wavelength dynamic topography is generated by temperature-driven density anomalies within a sub-plate asthenospheric channel. Stratigraphic observations from adjacent continental margins show that these dynamic topographic signals evolve quickly with time. More rapid temporal and spatial changes in vertical displacement of the Earth’s surface have direct consequences for fields as diverse as mantle flow, oceanic circulation and long-term climate change.
Abstract: Olivine is the dominant mineral present in kimberlite magmas; however, due to the volatile-rich nature of most kimberlites, they rarely survive late-stage serpentinisation. Here we present major and trace element data for a rare example of ultra-fresh olivine in a macrocrystic calcite kimberlite from the Benfontein kimberlite sill complex. Olivines are characterised by xenocrystic cores surrounded by multiple growth zones representing melt crystallisation and late-stage equilibration. Two distinct core populations are distinguished: Type 1) low Fo (88-89), Ni-rich, Ca- and Na-rich cores, interpreted here to be the result of carbonate-silicate metasomatism potentially as part of the earliest stages of kimberlite magmatism, and Type 2) high Fo (91-93), Ni-rich, low-Ca cores derived from a typical garnet peridotite mantle source. In both cases, the cores have transitional margins (Fo89-90) representing equilibration with a proto-kimberlite melt. Trace element concentrations, in particular Cr, of these transition zones suggest formation of the proto-kimberlite melt through assimilation of orthopyroxene from the surrounding garnet peridotite lithology. Trace element trends in the surrounding melt-zone olivine (Fo87-90) suggest evolution of the kimberlite through progressive olivine crystallisation. The final stages of olivine growth are represented by Fe-rich (Fo85) and P-rich olivine indicating kimberlite evolution to mafic compositions. Fine (< 60 ?m), Mg-rich olivine rims (Fo94-98) represent equilibration with the final stages of kimberlite evolution back to Fe-poor carbonatitic melts. We present a step-by-step model for kimberlite magma genesis and evolution from mantle to crust tracked by the chemistry of olivines in the Benfontein kimberlite. These steps include early stages of metasomatism and mantle assimilation followed by direct crystallisation of the kimberlite melt and late-stage equilibration with the evolved carbonatitic residual liquids. The Ca contents of the Type 1 xenocrystic olivines are the highest yet measured for mantle olivines, and do not overlap with any known mantle xenolith lithologies. These olivines likely represent an important stage of metasomatism directly related to the early stages of kimberlite melt ponding at the base of the lithospheric mantle.
Earth and Planetary Science Letters, Vol. 430, pp. 284-295.
Asia, Tibet
Luobusa Massif Type Iib
Abstract: For more than 20 years, the reported occurrence of diamonds in the chromites and peridotites of the Luobusa massif in Tibet (a complex described as an ophiolite) has been widely ignored by the diamond research community. This skepticism has persisted because the diamonds are similar in many respects to high-pressure high-temperature (HPHT) synthetic/industrial diamonds (grown from metal solvents), and the finding previously has not been independently replicated. We present a detailed examination of the Luobusa diamonds (recovered from both peridotites and chromitites), including morphology, size, color, impurity characteristics (by infrared spectroscopy), internal growth structures, trace-element patterns, and C and N isotopes. A detailed comparison with synthetic industrial diamonds shows many similarities. Cubo-octahedral morphology, yellow color due to unaggregated nitrogen (C centres only, Type Ib), metal-alloy inclusions and highly negative View the MathML source?C13 values are present in both sets of diamonds. The Tibetan diamonds (n=3n=3) show an exceptionally large range in View the MathML source?N15 (?5.6 to +28.7‰+28.7‰) within individual crystals, and inconsistent fractionation between {111} and {100} growth sectors. This in contrast to large synthetic HPHT diamonds grown by the temperature gradient method, which have with View the MathML source?N15=0‰ in {111} sectors and +30‰+30‰ in {100} sectors, as reported in the literature. This comparison is limited by the small sample set combined with the fact the diamonds probably grew by different processes. However, the Tibetan diamonds do have generally higher concentrations and different ratios of trace elements; most inclusions are a NiMnCo alloy, but there are also some small REE-rich phases never seen in HPHT synthetics. These characteristics indicate that the Tibetan diamonds grew in contact with a C-saturated Ni-Mn-Co-rich melt in a highly reduced environment. The stable isotopes indicate a major subduction-related contribution to the chemical environment. The unaggregated nitrogen, combined with the lack of evidence for resorption or plastic deformation, suggests a short (geologically speaking) residence in the mantle. Previously published models to explain the occurrence of the diamonds, and other phases indicative of highly reduced conditions and very high pressures, have failed to take into account the characteristics of the diamonds and the implications for their formation. For these diamonds to be seriously considered as the result of a natural growth environment requires a new understanding of mantle conditions that could produce them.
Geochimica et Cosmochimica Acta, Vol. 157, pp. 1-12.
Technology
Diamond morphology
Abstract: Nitrogen isotope values from mantle diamonds are a commonly used tracer in the quest to track volatiles within the Earth’s mantle through deep time. Interpretations of this isotope data are valid so long as stable isotope fractionation processes in the mantle are understood. The fractionation of nitrogen isotopes between {1 1 1} and {1 0 0} growth sectors is well documented for high-pressure high-temperature (HPHT) synthetic diamonds, but there is little data on whether it also occurs in natural mixed-habit diamonds. We present 91 in-situ nitrogen isotope (?15N) measurements, along with carbon isotope (?13C) values and nitrogen abundances [N], obtained from three mixed-habit diamonds by secondary ion mass spectrometry (SIMS). While the well-documented enrichment of nitrogen concentrations in octahedral sectors compared to contemporaneous cuboid sectors is observed, a similarly clear disparity is not obvious in the ?15N data. Whereas HPHT synthetic diamonds exhibit 15N enrichment in the {1 0 0} sectors by ?+30‰, the mixed-habit diamonds studied here show enrichment of the octahedral sectors in 15N by only 0.4-1‰. This major difference between HPHT synthetic and natural mixed-habit diamonds is proposed to be the result of different physical properties of the growth interfaces. The smooth interfaces of the octahedral sectors are the same in both types of crystal, but the outermost atoms on the smooth cube interfaces of an HPHT synthetic diamond behave differently to those on the rough cuboid interfaces of the natural mixed-habit diamonds, resulting in different ?15N values. Both the ?13C (average of ??8.7‰) and ?15N (average of ?0‰) data show only minor offsets from the typical mantle values (?13C = ?5 ± 3‰, ?15N = ?5 ± 4‰). This may indicate diamond formation from a mantle derived fluid/melt containing a minor subducted component (lowering ?13C values and elevating ?15N) or relate to moderate degrees of isotopic fractionation of a pure mantle fluid/melt by prior diamond precipitation. The homogeneous nature of both the carbon and nitrogen isotopic compositions of all three diamonds, however, documents continuous and unlimited supply of diamond forming fluid/melt, with a constant composition. Such homogenous isotopic compositions exclude fluid mixing or isotopic fractionation close to the site of diamond formation and preclude distinguishing between these two processes based on diamond analyses alone.
Abstract: Magnesium and oxygen are critical elements in the solid Earth and hydrosphere. A better understanding of the combined behavior of Mg and O isotopes will refine their use as a tracer of geochemical processes and Earth evolution. In this study, the Mg-isotope compositions of garnet and omphacite separated from well-characterized xenolithic eclogites from the Roberts Victor kimberlite pipe (South Africa) have been measured by solution multi-collector ICP-MS. The reconstructed whole-rock ?26Mg values of Type I (metasomatized) eclogites range from ? 0.61‰ to ? 0.20‰ (Type IA) and from ? 0.60‰ to ? 0.30‰ (Type IB) (mean ? 0.43‰ ± 0.12‰), while ?26Mg of Type IIA (fresh, least metasomatized) eclogites ranges from ? 1.09‰ to ? 0.17‰ (mean ? 0.69‰ ± 0.41‰); a Type IIB (fresh, least metasomatized) has ?26Mg of ? 0.37‰. Oxygen-isotope compositions of garnet were analyzed in situ by SIMS (CAMECA 1280) and cross-checked by laser fluorination. Garnets have ?18O of 6.53‰ to 9.08‰ in Type IA, 6.14‰ to 6.65‰ in Type IB, and 2.34‰ to 2.91‰ in Type IIB. The variation of ?26Mg and ?18O in Type IA and IB eclogites is consistent with the previously proposed model for the evolution of these samples, based on major and trace elements and radiogenic isotopes. In this model, the protoliths (Type II eclogites) were metasomatized by carbonatitic to kimberlitic melts/fluids to produce first Type IA eclogites and then Type IB. Metasomatism has changed the O-isotope compositions, but the Mg-isotope compositions of Type IA are mainly controlled by the protoliths; those of Type IB eclogites reflect mixing between the protoliths and the kimberlitic melt/fluid. The combination of a large range of ?26Mg and low ?18O in Type II eclogites cannot be explained easily by seawater alteration of oceanic crust, interaction of carbonate/silicate sediments with oceanic crust, or partial melting of mafic rocks.
Abstract: Diamond, moissanite and a variety of other minerals, similar to those reported from ophiolites in Tibet and northern Russia, have recently been discovered in chromitites of the Hegenshan ophiolite of the Central Asian Orogenic Belt, north China. The chromitites are small, podiform and vein-like bodies hosted in dunite, clinopyroxene-bearing peridotite, troctolite and gabbro. All of the analysed chromite grains are relatively Al-rich, with Cr# [100Cr/(Cr+Al)] of about 47-53. Preliminary studies of mainly disseminated chromitite from ore body No. 3756 have identified more than 30 mineral species in addition to diamond and moissanite. These include oxides (mostly hematite, magnetite, rutile, anatase, cassiterite, and quartz), sulfides (pyrite, marcasite and others), silicates (magnesian olivine, enstatite, augite, diopside, uvarovite, pyrope, orthoclase, zircon, sphene, vesuvianite, chlorite and serpentine) and others (e.g., calcite, monazite, glauberite, iowaite and a range of metallic alloys). This study demonstrates that diamond, moissanite and other exotic minerals can occur in high-Al, as well as high-Cr chromites, and significantly extends the geographic and age range of known diamond-bearing ophiolites.
Abstract: Numerical experiments are used to investigate the thermo-mechanical controls for inducing flat subduction and why flat subduction is rare relative to normal/steep subduction. Our modeling results demonstrate that flat subduction is an end-member of a steady state subduction geometry and is characterized by a curved slab with a nearly-horizontal slab section. Intermediate cases between normal/steep and flat subduction appear to be transient in origin and evolve toward one of the stable end-members. Physical parameters inducing flat subduction can be classified into four categories: buoyancy of the subducting oceanic lithosphere (e.g., slab age, oceanic crustal thickness), viscous coupling between the overriding and downgoing plates (e.g., initial subduction angle), external kinematic conditions, and rheological properties of the subduction zone. On the basis of parameter sensitivity tests and the main characteristics of present-day flat subduction zones, positive buoyancy from either the young slab or the thickened oceanic crust is considered as the primary controlling parameter. Our results show that the possibility of flat subduction is directly proportional to oceanic crustal thickness and inversely proportional to the slab age. Furthermore, oceanic crust must be thicker than 8 km to induce flat subduction, when the slab is older than 30 Ma with an initial subduction angle of ? 20° and without absolute trenchward motion of the overriding plate. The lower the initial subduction angle or the thicker the overriding continental lithosphere, the more likelihood for flat subduction. The initial subduction angle is more influential for the development of flat subduction than the overriding lithospheric thickness, and a thick overriding lithosphere induces flat subduction only under the condition of an initial subduction angle of ? 25°, with a slab age of ? 30 Ma and without absolute trenchward motion of the overriding plate. However, when the initial subduction angle is increased to > 25°, no flat subduction is predicted. All the parameters are evaluated within the constraints of a mechanical framework in which the slab geometry is regarded as a result of a balance between the gravitational and hydrodynamic torques. Any factor that can sufficiently reduce gravitational torque or increase hydrodynamic torque will exert a strong effect on flat subduction development. Our results are consistent with the observations of modern flat subduction zones on Earth.
Abstract: The global boron geochemical cycle is closely linked to recycling of geologic material via subduction processes that have occurred over billions of years of Earth’s history. The origin of carbonatites, unique melts derived from carbon-rich and carbonate-rich regions of the upper mantle, has been linked to a variety of mantle-related processes, including subduction and plume-lithosphere interaction. Here we present boron isotope (?11B) compositions for carbonatites from locations worldwide that span a wide range of emplacement ages (between ~40 and ~2,600?Ma). Hence, they provide insight into the temporal evolution of their mantle sources for ~2.6 billion years of Earth’s history. Boron isotope values are highly variable and range between ?8.6 and +5.5, with all of the young (<300?Ma) carbonatites characterized by more positive ?11B values (>?4.0‰ whereas most of the older carbonatite samples record lower B isotope values. Given the ?11B value for asthenospheric mantle of ?7 ± 1‰ the B isotope compositions for young carbonatites require the involvement of an enriched (crustal) component. Recycled crustal components may be sampled by carbonatite melts associated with mantle plume activity coincident with major tectonic events, and linked to past episodes of significant subduction associated with supercontinent formation.
Abstract: The primordial crust on the Earth formed from the crystallization of the surface magma ocean during the Hadean. However, geological surveys have found no evidence of rocks dating back to more than 4 Ga on the Earth's surface, suggesting the Hadean crust was lost due to some processes. We investigated the subduction of one of the possible candidates for the primordial crust, anorthosite and KREEP crust similar to the Moon, which is also considered to have formed from the crystallization of the magma ocean. Similar to the present Earth, the subduction of primordial crust by subduction erosion is expected to be an effective way of eliminating primordial crust from the surface. In this study, the subduction rate of the primordial crust via subduction channels is evaluated by numerical simulations. The subduction channels are located between the subducting slab and the mantle wedge and are comprised of primordial crust materials supplied mainly by subduction erosion. We have found that primordial anorthosite and KREEP crust of up to ?50 km thick at the Earth's surface was able to be conveyed to the deep mantle within 0.1-2 Gy by that mechanism.
Abstract: The results of the first study of the PGE distribution in deformed lherzolites of the Udachnaya kimberlite pipe (Yakutia) are presented here. The complex character of evolution of the PGE composition in the Deformed lherzolites is assumed to be the result of silicate metasomatism. At the first stage, growth in the amount of clinopyroxene and garnet in the rock is accompanied by a decrease in the concentration of the compatible PGE (Os, Ir). During the final stage, the rock is enriched with incompatible PGE (Pt, Pd) and Re possible due to precipitation of submicron-sized particles of sulfides in the interstitial space of these mantle rocks.
Abstract: Continental crust is buoyant compared with its oceanic counterpart and resists subduction into the mantle. When two continents collide, the mass balance for the continental crust is therefore assumed to be maintained. Here we use estimates of pre-collisional crustal thickness and convergence history derived from plate kinematic models to calculate the crustal mass balance in the India-Asia collisional system. Using the current best estimates for the timing of the diachronous onset of collision between India and Eurasia, we find that about 50% of the pre-collisional continental crustal mass cannot be accounted for in the crustal reservoir preserved at Earth’s surface today—represented by the mass preserved in the thickened crust that makes up the Himalaya, Tibet and much of adjacent Asia, as well as southeast Asian tectonic escape and exported eroded sediments. This implies large-scale subduction of continental crust during the collision, with a mass equivalent to about 15% of the total oceanic crustal subduction flux since 56 million years ago. We suggest that similar contamination of the mantle by direct input of radiogenic continental crustal materials during past continent-continent collisions is reflected in some ocean crust and ocean island basalt geochemistry. The subduction of continental crust may therefore contribute significantly to the evolution of mantle geochemistry.
Physics of the Earth and Planetary Interiors, Vol. 254, pp. 12-24.
Africa, Europe
Geophysics - seismics, anisotropy, boundary
Abstract: The inner core under Africa is thought to be a region where the nature of inner core texture changes: from the strongly anisotropic ‘western’ part of the inner core to the weakly anisotropic, or isotropic ‘eastern’ part of the inner core. Additionally, observations of a difference in isotropic velocity between the two hemispheres have been made. A very large new dataset of simultaneous PKPdf and PKPbc observations, on which differential travel times have been measured, is used to examine the upper 360 km of the inner core under Europe, Africa and the surrounding oceans. Inversion of the differential travel time data for laterally varying inner core anisotropy reveals that inner core anisotropy is stronger under central Africa and the Atlantic Ocean than under the western Indian Ocean. No hemispherical pattern is present in Voigt isotropic velocities, indicating that the variation in anisotropy is due to differing degrees of crystal alignment in the inner core, not material differences. When anisotropy is permitted to change with depth, the upper east-most part of the study region shows weaker anisotropy than the central and western regions. When depth dependence in the inner core is neglected the hemisphere boundary is better represented as a line at 40°E than one at 10°E, however, it is apparent that the variation of anisotropy as a function of depth means that one line of longitude cannot truly separate the more and less anisotropic regions of the inner core. The anisotropy observed in the part of the inner core under Africa which lies in the ‘western’ hemisphere is much weaker than that under central America, showing that the western hemisphere is not uniformly anisotropic. As the region of low anisotropy spans a significant depth extent, it is likely that heterogeneous heat fluxes in the core, which may cause variations in inner core anisotropy, have persisted for several hundred million years.
Physics of the Earth and Planetary Interiors, Vol. 254, pp. 12-24.
Africa, Europe
Anisotropy
Abstract: The inner core under Africa is thought to be a region where the nature of inner core texture changes: from the strongly anisotropic ‘western’ part of the inner core to the weakly anisotropic, or isotropic ‘eastern’ part of the inner core. Additionally, observations of a difference in isotropic velocity between the two hemispheres have been made. A very large new dataset of simultaneous PKPdf and PKPbc observations, on which differential travel times have been measured, is used to examine the upper 360 km of the inner core under Europe, Africa and the surrounding oceans. Inversion of the differential travel time data for laterally varying inner core anisotropy reveals that inner core anisotropy is stronger under central Africa and the Atlantic Ocean than under the western Indian Ocean. No hemispherical pattern is present in Voigt isotropic velocities, indicating that the variation in anisotropy is due to differing degrees of crystal alignment in the inner core, not material differences. When anisotropy is permitted to change with depth, the upper east-most part of the study region shows weaker anisotropy than the central and western regions. When depth dependence in the inner core is neglected the hemisphere boundary is better represented as a line at 40°E than one at 10°E, however, it is apparent that the variation of anisotropy as a function of depth means that one line of longitude cannot truly separate the more and less anisotropic regions of the inner core. The anisotropy observed in the part of the inner core under Africa which lies in the ‘western’ hemisphere is much weaker than that under central America, showing that the western hemisphere is not uniformly anisotropic. As the region of low anisotropy spans a significant depth extent, it is likely that heterogeneous heat fluxes in the core, which may cause variations in inner core anisotropy, have persisted for several hundred million years.
Abstract: The Kumta and Mercara suture zones welding together Archean crustal blocks in western peninsular India offer critical insights into Precambrian continental juxtapositions and the crustal evolution of eastern Gondwana. Here we present the results from an integrated study of the structure, geology, petrology, mineral chemistry, metamorphic P-T conditions, zircon U-Pb ages and Lu-Hf isotopes of metasedimentary rocks from the two sutures. The dominant rocks in the Kumta suture are greenschist- to amphibolite-facies quartz-phengite schist, garnet-biotite schist, chlorite schist, fuchsite schist and marble. The textural relations, mineral chemistry and thermodynamic modelling of garnet-biotite schist from the Kumta suture indicate peak metamorphic P-T conditions of ca. 11 kbar at 790 °C, with detrital SHRIMP U-Pb zircon ages ranging from 3420 to 2547 Ma, ?Hf (t) values from ? 9.2 to 5.6, and TDMc model ages from 3747 to 2792 Ma. The K-Ar age of phengite from quartz-phengite schist is ca. 1326 Ma and that of biotite from garnet-biotite schist is ca. 1385 Ma, which are interpreted to broadly constrain the timing of metamorphism related to the suturing event. The Mercara suture contains amphibolite- to granulite-facies mylonitic quartzo-feldspathic gneiss, garnet-kyanite-sillimanite gneiss, garnet-biotite-kyanite-gedrite-cordierite gneiss, garnet-biotite-hornblende gneiss, calc-silicate granulite and metagabbro. The textural relations, mineral chemistry and thermodynamic modelling of garnet-biotite-kyanite-gedrite-cordierite gneiss from the Mercara suture indicate peak metamorphic P-T conditions of ca. 13 kbar at 825 °C, followed by isothermal decompression and cooling. For pelitic gneisses from the Mercara suture, LA-ICP-MS U-Pb zircon ages vary from 3249 to 3045 Ma, ?Hf (t) values range from ? 18.9 to 4.2, and TDMc model ages vary from 4094 to 3314 Ma. The lower intercept age of detrital zircons in the pelitic gneisses from the Mercara suture ranges from 1464 to 1106 Ma, indicating the approximate timing of a major lead-loss event, possibly corresponding to metamorphism, and is broadly coeval with events in the Kumta suture. Synthesis of the above results indicates that the Kumta and Mercara suture zones incorporated sediments from Palaeoarchean to Mesoproterozoic sources and underwent high-pressure metamorphism in the late Mesoproterozoic. The protolith sediments were derived from regions containing juvenile Palaeoarchean crust, together with detritus from the recycling of older continental crust. Integration of the above results with published data suggests that the Mesoproterozoic (1460-1100 Ma) Kumta and Mercara suture zones separate the Archean (3400-2500 Ma) Karwar-Coorg block and Dharwar Craton in western peninsular India. Based on regional structural and other geological data we interpret the Kumta and Mercara suture zones as extensions of the Betsimisaraka suture of eastern Madagascar into western India.
Abstract: The comprehensive petrographical, petrochemical and mineralogical study of the Kovdor magnetite-apatite-baddeleyite deposit in the phoscorite-carbonatite complex (Murmansk Region, Russia) revealed a spatial distribution of grain size and chemical composition of three economically extractable minerals — magnetite, apatite, and baddeleyite, showing that zonal distribution of mineral properties mimics both concentric and vertical zonation of the carbonatite-phoscorite pipe. The marginal zone of the pipe consists of (apatite)-forsterite phoscorite carrying fine grains of Ti-Mn-Si-rich magnetite with ilmenite exsolution lamellae, fine grains of Fe-Mg-rich apatite and finest grains of baddeleyite, enriched in Mg, Fe, Si and Mn. The intermediate zone accommodates carbonate-free magnetite-rich phoscorites that carry medium to coarse grains of Mg-Al-rich magnetite with exsolution inclusions of spinel, medium-grained pure apatite and baddeleyite. The axial zone hosts carbonate-rich phoscorites and phoscorite-related carbonatites bearing medium-grained Ti-V-Ca-rich magnetite with exsolution inclusions of geikielite-ilmenite, fine grains of Ba-Sr-Ln-rich apatite and comparatively large grains of baddeleyite, enriched in Hf, Ta, Nb and Sc. The collected data enable us to predict such important mineralogical characteristics of the multicomponent ore as chemical composition and grain size of economic and associated minerals, presence of contaminating inclusions, etc. We have identified potential areas of maximum concentration of such by-products as scandium, niobium and hafnium in baddeleyite and REEs in apatite.
Abstract: The comprehensive petrographical, petrochemical and mineralogical study of the Kovdor magnetite-apatite-baddeleyite deposit in the phoscorite-carbonatite complex (Murmansk Region, Russia) revealed a spatial distribution of grain size and chemical composition of three economically extractable minerals — magnetite, apatite, and baddeleyite, showing that zonal distribution of mineral properties mimics both concentric and vertical zonation of the carbonatite-phoscorite pipe. The marginal zone of the pipe consists of (apatite)-forsterite phoscorite carrying fine grains of Ti-Mn-Si-rich magnetite with ilmenite exsolution lamellae, fine grains of Fe-Mg-rich apatite and finest grains of baddeleyite, enriched in Mg, Fe, Si and Mn. The intermediate zone accommodates carbonate-free magnetite-rich phoscorites that carry medium to coarse grains of Mg-Al-rich magnetite with exsolution inclusions of spinel, medium-grained pure apatite and baddeleyite. The axial zone hosts carbonate-rich phoscorites and phoscorite-related carbonatites bearing medium-grained Ti-V-Ca-rich magnetite with exsolution inclusions of geikielite-ilmenite, fine grains of Ba-Sr-Ln-rich apatite and comparatively large grains of baddeleyite, enriched in Hf, Ta, Nb and Sc. The collected data enable us to predict such important mineralogical characteristics of the multicomponent ore as chemical composition and grain size of economic and associated minerals, presence of contaminating inclusions, etc. We have identified potential areas of maximum concentration of such by-products as scandium, niobium and hafnium in baddeleyite and REEs in apatite.
Abstract: The comprehensive petrographical, petrochemical and mineralogical study of the Kovdor magnetite-apatite-baddeleyite deposit in the phoscorite-carbonatite complex (Murmansk Region, Russia) revealed a spatial distribution of grain size and chemical composition of three economically extractable minerals — magnetite, apatite, and baddeleyite, showing that zonal distribution of mineral properties mimics both concentric and vertical zonation of the carbonatite-phoscorite pipe.The marginal zone of the pipe consists of (apatite)-forsterite phoscorite carrying fine grains of Ti-Mn-Si-rich magnetite with ilmenite exsolution lamellae, fine grains of Fe-Mg-rich apatite and finest grains of baddeleyite, enriched in Mg, Fe, Si and Mn. The intermediate zone accommodates carbonate-free magnetite-rich phoscorites that carry medium to coarse grains of Mg-Al-rich magnetite with exsolution inclusions of spinel, medium-grained pure apatite and baddeleyite. The axial zone hosts carbonate-rich phoscorites and phoscorite-related carbonatites bearing medium-grained Ti-V-Ca-rich magnetite with exsolution inclusions of geikielite-ilmenite, fine grains of Ba-Sr-Ln-rich apatite and comparatively large grains of baddeleyite, enriched in Hf, Ta, Nb and Sc. The collected data enable us to predict such important mineralogical characteristics of the multicomponent ore as chemical composition and grain size of economic and associated minerals, presence of contaminating inclusions, etc. We have identified potential areas of maximum concentration of such by-products as scandium, niobium and hafnium in baddeleyite and REEs in apatite.
Abstract: Diamonds and their inclusions are unique probes into the deep Earth, tracking the deep carbon cycle to >800?km. Understanding the mechanisms of carbon mobilization and freezing is a prerequisite for quantifying the fluxes of carbon in the deep Earth. Here we show direct evidence for the formation of diamond by redox reactions involving FeNi sulfides. Transmission Kikuchi Diffraction identifies an arrested redox reaction from pyrrhotite to magnetite included in diamond. The magnetite corona shows coherent epitaxy with relict pyrrhotite and diamond, indicating that diamond nucleated on magnetite. Furthermore, structures inherited from h-Fe3O4 define a phase transformation at depths of 320 -330?km, the base of the Kaapvaal lithosphere. The oxidation of pyrrhotite to magnetite is an important trigger of diamond precipitation in the upper mantle, explaining the presence of these phases in diamonds.
Journal of South African Institute of Mining and Metallurgy, Vol. 116, Aug. pp. 731-737.
Africa, Namibia
Deposit - marine placers
Abstract: Over the past 80 years, the Namibian diamondiferous marine placer has been studied extensively to develop solutions for mining and sampling challenges. The types of studies include the statistical modelling of the distributions of the stone counts per sample; investigating the relationship between geology and the grade distribution; assessing the quality potential of the entrapment of the available diamond pulse; using predetermined acceptability of barren samples (zero proportion (Zp) samples) to model distributions; optimal sample sizes; and more. During early-stage project evaluation it is more important to find out if a particular area is likely to be above a specific cut-off grade than to focus on sampling for the purpose of accurate resource estimation. Previous work using mixed Poisson and Sichel distributions to model the abundant onshore diamond data has been very successful in modelling the long-tailed nature of these linear beach deposits. The means of these distributions are, however, sensitive to extreme values. Technical and cost constraints prevent a similar scale of sample collection in an adjacent, geologically equivalent, submerged beach environment. A method not sensitive to extreme values is thus required to make early-stage assessments of the likelihood that the grade of a particular target is above a minimum cut-off grade. The Nachman model describes the functional relationship between the mean population density and proportion of barren patches ( Zp) in a patchy environment. A prerequisite for using the Nachman model is that the underlying data must be modelled using a negative binomial distribution (NBD). The case study data is from an analogous area adjacent to the exploration target and meets the NBD requirement. It is thus appropriate to apply the Nachman model. The Nachman model provides an opportunity to use the observed Zpto predict the mean grade for an area at the very early stage of an exploration project. In future, early-stage exploration data from a homogenous geological zone exhibiting characteristics of the Nachman model assumptions can thus be used to rank and target those areas that show potential to be above the minimum required grade cut-off for follow-up sampling and inclusion in the mine planning cycle.
Journal of South African Institute of Mining and Metallurgy, Vol. 116, July pp. 629-635.
Africa, Namibia
Deposit - marine placers
Abstract: During early-stage diamond exploration projects, hard data underpinning spatial continuity is often very limited. An extreme example of this is a submerged diamondiferous marine placer target area alongside a current onshore mining area in southwestern Namibia. Although an abundance of geological and grade data exists for the adjacent onshore mining area, the target area itself contains no such information. Despite this apparent abundance of data, it is extremely difficult to obtain a variogram (Prins and Jacob, 2014) for use in this study area. The use of traditional simulation techniques is further hindered by the fact that diamond entrapment within the highly gullied footwall is non-stationary. An alternative approach for creating a simulated virtual orebody (VOB) is thus required in order to enable the assessment of sampling strategies. This paper demonstrates how expert opinion is used to generate a composite probability map for diamond concentration using a greyscale hand-sketching technique. The probability map is subsequently calibrated and populated using the diamond distribution for different raised beaches obtained from analog data based on sample results adjacent to the target area. The resultant grade simulation is used to test different sample scenarios and is a first step towards determining an appropriate sampling strategy for the target area. The VOB is used to analyse and rank the efficiency of different sampling strategies for grade determination of submerged diamondiferous linear beach exploration targets.
Abstract: The wealth of seismic observations collected over the past 20 years has raised intriguing questions about the three-dimensional (3D) nature of the mantle flow field close to subduction zones and provided a valuable constraint for how the plate geometry may influence mantle flow proximal to the slab. In geodynamics, there has been a new direction of subduction zone modelling that has explored the 3D nature of slab-driven mantle flow, motivated in part by the observations from shear wave splitting, but also by the observed variations in slab geometries worldwide. Advances in high-performance computing are now allowing for an unprecedented level of detail to be incorporated into numerical models of subduction. This paper summarizes recent advances from 3D geodynamic models that reveal the complex nature of slab-driven mantle flow, including trench parallel flow, toroidal flow around slab edges, mantle upwelling at lateral slab edges, and small scale convection within the mantle wedge. This implies slab-driven mantle deformation zones occur in the asthenosphere proximal to the slab, wherein the mantle may commonly flow in a different direction and rate than the surface plates, implying laterally variable plate-mantle coupling. The 3D slab-driven mantle flow can explain, in part, the lateral transport of geochemical signatures in subduction zones. In addition, high-resolution geographically referenced models can inform the interpretation of slab structure, where seismic data are lacking. The incorporation of complex plate boundaries into high-resolution, 3D numerical models opens the door to a new avenue of research in model construction, data assimilation, and modelling workflows, and gives 3D immersive visualization a new role in scientific discovery.
Annual Review of Earth and Planetary Sciences, Vol. 43, pp. 363-404.
Mantle
Magmatism
Abstract: We review data and recent research on arc composition, focusing on the relatively complete arc crustal sections in the Jurassic Talkeetna arc (south central Alaska) and the Cretaceous Kohistan arc (northwest Pakistan), together with seismic data on the lower crust and uppermost mantle. Whereas primitive arc lavas are dominantly basaltic, the Kohistan crust is clearly andesitic and the Talkeetna crust could be andesitic. The andesitic compositions of the two arc sections are within the range of estimates for the major element composition of continental crust. Calculated seismic sections for Kohistan and Talkeetna provide a close match for the thicker parts of the active Izu arc, suggesting that it, too, could have an andesitic bulk composition. Because andesitic crust is buoyant with respect to the underlying mantle, much of this material represents a net addition to continental crust. Production of bulk crust from a parental melt in equilibrium with mantle olivine or pyroxene requires processing of igneous crust, probably via density instabilities. Delamination of dense cumulates from the base of arc crust, foundering into less dense, underlying mantle peridotite, is likely, as supported by geochemical evidence from Talkeetna and Kohistan. Relamination of buoyant, subducting material—during sediment subduction, subduction erosion, arcarc collision, and continental collision—is also likely.
Mineralogy and Petrology, In press available, 39p.
Australia
Lamproite
Abstract: New data are presented for groundmass chromian spinel, perovskite, ilmenite, and K-Ti-Ba-rich phases from the Miocene olivine and leucite lamproites of the West Kimberley region. The spinels range from early Ti-Al-Mg chromite through Ti-Mg chromite to Ti-chromite and, in Ellendale 4 and 9, Ti-Cr magnetite and Ti-magnetite. Most crystallized at 850-1220 °C and fO2 ~ MW + 1-2 log units except for Ellendale 4 and 9 spinels which underwent marked late oxidation at ~650-750 °C with fO2 increasing sharply to ~FMQ + 2-3 log units. Perovskite is ubiquitous in the olivine lamproites and the Walgidee Hills (WH) lamproite. Compositional features of the perovskite are a wide range in Cr, and high Sr, Nb, Th, and LREE contents with highly fractionated REE patterns (La/YbCN ~ 750-3000). Perovskite from WH defines an evolutionary trend of enrichment in Na, Sr, Y, Nb, U and REE, and depletion in Cr, Fe, and Th with magma fractionation. Late crystallizing WH perovskite shows a decrease in LREE due to relative depletion of LREE in residual magma by extended crystallization of perovskite (and apatite). Priderite ((K,Ba)(Ti,Fe3+)8O16) has low Mg and V, and a range in Cr contents which decrease with magma evolution. Jeppeite ((K,Ba)2(Ti,Fe)6O13), has higher Sr and Nb content than priderite. Both contain low Y and REEs. Wadeite (K2ZrSi3O9), a ubiquitous groundmass phase, has high Sc, Rb and Hf contents, and strongly LREE-depleted REE patterns with positive Ce anomalies. Noonkanbahite, a late crystallizing phase in WH, has low Cr and Ni, and high Sr, Nb and Y contents. REE patterns for noonkanbahite display high HREE, depleted MREE, enriched La-Ce-Pr, and a positive Eu anomaly.
Abstract: Heat flow and heat production data complement seismic information and provide strong constraints on crustal composition, thickness and evolution. They have helped understand the nature of the Mohorovicic discontinuity and the variations in seismic velocities below the Moho. Notably, heat flow studies have delineated the vertical distribution of heat producing elements throughout the crust and in the upper most mantle lithosphere. Analysis of global data sets on heat flow and crustal thickness demonstrate that there is no correlation between these two variables. This is due to the large spatial variations in crustal composition and heat production that exist within a single geological province. For a given crustal thickness, the Moho temperature varies within a wide range (? 300 K) depending on surface heat flux and crustal heat production. Thus one cannot use generic models based on a “type” crustal column to calculate crustal geotherms. In stable regions, lower crustal temperatures depend on the amount and vertical distribution of heat producing elements in the crust. These temperatures determine the conditions of crustal stability and impose a limit on the maximum thickness of a stabilized crust.
Earth and Planetary Science Letters, Vol. 433, pp. 159-168.
Europe, Iceland
Mantle - 660 km
Abstract: The presence of a mantle plume beneath Iceland has long been hypothesised to explain its high volumes of crustal volcanism. Practical constraints in seismic tomography mean that thin, slow velocity anomalies representative of a mantle plume signature are difficult to image. However it is possible to infer the presence of temperature anomalies at depth from the effect they have on phase transitions in surrounding mantle material. Phase changes in the olivine component of mantle rocks are thought to be responsible for global mantle seismic discontinuities at 410 and 660 km depth, though exact depths are dependent on surrounding temperature conditions. This study uses P to S seismic wave conversions at mantle discontinuities to investigate variation in topography allowing inference of temperature anomalies within the transition zone. We employ a large data set from a wide range of seismic stations across the North Atlantic region and a dense network in Iceland, including over 100 stations run by the University of Cambridge. Data are used to create over 6000 receiver functions. These are converted from time to depth including 3D corrections for variations in crustal thickness and upper mantle velocity heterogeneities, and then stacked based on common conversion points. We find that both the 410 and 660 km discontinuities are depressed under Iceland compared to normal depths in the surrounding region. The depression of 30 km observed on the 410 km discontinuity could be artificially deepened by un-modelled slow anomalies in the correcting velocity model. Adding a slow velocity conduit of ?1.44% reduces the depression to 18 km; in this scenario both the velocity reduction and discontinuity topography reflect a temperature anomaly of 210 K. We find that much larger velocity reductions would be required to remove all depression on the 660 km discontinuity, and therefore correlated discontinuity depressions appear to be a robust feature of the data. While it is not possible to definitively rule out the possibility of uncorrected velocity anomalies causing the observed correlated topography we show that this is unlikely. Instead our preferred interpretation is that the 660 km discontinuity is controlled by a garnet phase transition described by a positive Clapeyron slope, such that depression of the 660 is representative of a hot anomaly at depth.
Geochimica et Cosmochimica Acta, in press available
Africa, Namibia
Picrite, ferroPicrite
Abstract: We present major and trace element compositions of 154 re-homogenised olivine-hosted melt inclusions found in primitive rocks (picrites and ferropicrites) from the Mesozoic Paraná-Etendeka and Karoo Continental Flood Basalt (CFB) provinces. The major element compositions of the melt inclusions, especially their Fe/Mg ratios, are variable and erratic, and attributed to the re-homogenisation process during sample preparation. In contrast, the trace element compositions of both the picrite and ferropicrite olivine-hosted melt inclusions are remarkably uniform and closely reflect those of the host whole-rocks, except in a small subset affected by hydrothermal alteration. The Paraná-Etendeka picrites and ferropicrites are petrogenetically related to the more evolved and voluminous flood basalts, and so we propose that compositional homogeneity at the melt inclusion scale implies that the CFB parental mantle melts were well mixed prior to extensive crystallisation. The incompatible trace element homogeneity of olivine-hosted melt inclusions in Paraná-Etendeka and Karoo near primitive magmatic rocks has also been identified in other CFB provinces and contrasts with findings from studies of basalts from mid-ocean ridges (e.g. Iceland and FAMOUS on the Mid Atlantic Ridge), where heterogeneity of incompatible trace elements in olivine-hosted melt inclusions is much more pronounced. We suggest that the low variability in incompatible trace element contents of olivine-hosted melt inclusions in near-primitive CFB rocks, and also ocean island basalts associated with moderately thick lithosphere (e.g. Hawaii, Galápagos, Samoa) may reflect mixing along their longer transport pathways during ascent and/or a temperature contrast between the liquidus and the liquid when it arrives in the crust. These thermal paths promote mixing of mantle melts prior to their entrapment by growing olivine crystals in crustal magma chambers. Olivine-hosted melt inclusions of ferropicrites from the Paraná-Etendeka and Karoo CFB have the least variable compositions of all global melt inclusion suites, which may be a function of their unusually deep origin and low viscosity.
Geochimica et Cosmochimica Acta, Vol. 196, pp. 36-57.
Africa, Namibia, Angola
Paran-Etendeka, Karoo
Abstract: We present major and trace element compositions of 154 re-homogenised olivine-hosted melt inclusions found in primitive rocks (picrites and ferropicrites) from the Mesozoic Parana ´-Etendeka and Karoo Continental Flood Basalt (CFB) provinces. The major element compositions of the melt inclusions, especially their Fe/Mg ratios, are variable and erratic, and attributed to the re-homogenisation process during sample preparation. In contrast, the trace element compositions of both the picrite and ferropicrite olivine-hosted melt inclusions are remarkably uniform and closely re?ect those of the host whole-rocks, except in a small subset a?ected by hydrothermal alteration. The Parana ´-Etendeka picrites and ferropicrites are petrogenet- ically related to the more evolved and voluminous ?ood basalts, and so we propose that compositional homogeneity at the melt inclusion scale implies that the CFB parental mantle melts were well mixed prior to extensive crystallisation. The incompatible trace element homogeneity of olivine-hosted melt inclusions in Parana ´-Etendeka and Karoo primitive magmatic rocks has also been identi?ed in other CFB provinces and contrasts with ?ndings from studies of basalts from mid- ocean ridges (e.g. Iceland and FAMOUS on the Mid Atlantic Ridge), where heterogeneity of incompatible trace elements in olivine-hosted melt inclusions is more pronounced. We suggest that the low variability in incompatible trace element contents of olivine-hosted melt inclusions in near-primitive CFB rocks, and also ocean island basalts associated with moderately thick lithosphere (e.g. Hawaii, Gala ´pagos, Samoa), may re?ect mixing along their longer transport pathways during ascent and/or a temperature contrast between the liquidus and the liquid when it arrives in the crust. These thermal paths promote mixing of mantle melts prior to their entrapment by growing olivine crystals in crustal magma chambers. Olivine-hosted melt inclusions of ferropicrites from the Parana ´-Etendeka and Karoo CFB have the least variable compositions of all global melt inclusion suites, which may be a function of their unusually deep origin and low viscosity.
Geological Society of America Bulletin, Vol. 127, pp. 11/12, pp. 1766-1776.
United States, California
Not specific to diamonds but of interest
Abstract: Topographic evidence requires that some rivers actively meander in bedrock, yet the way in which rivers can erode laterally and meander within bedrock banks is not well understood. Lateral channel migration, and especially lateral channel migration via active bedrock meandering, is commonly responsible for the preservation of unpaired strath terraces. A process-level understanding of lateral channel migration and active meandering in bedrock rivers is key to interpreting the climatic and tectonic significance of unpaired strath terraces and the planform shape of bedrock rivers. In this study, we compare erosional processes in two adjacent bedrock channels in the Santa Cruz Mountains, California. The main differences between these channels are that Pescadero Creek actively meanders within mudstone, while Butano Creek is straight and incises sandstone. Laboratory rock strength and slake durability tests show that while the two lithologies have similar tensile strengths before drying, the meander-supporting mudstone loses strength dramatically when dried and rewet (slakes), while the sandstone does not. The slaked mudstone bank rock was easily detached without the need for bed-load tools during in situ erosion tests, while mudstone that had not dried and sandstone were not detachable. The depth of bank rock detached solely from rewetting of previously dried mudstone ranges between 1 and 8 mm, which is well in excess of annual background erosion in the Santa Cruz Mountains. In addition, boulders of the mudstone rapidly disintegrated upon wetting and drying in the laboratory, whereas sandstone boulders remained intact. In the meandering stream, there is a consistent pattern of scoured bedrock (exposed to drying and slaking) along the outside "cutbank" of meander bends and forced bars that grade into soil and vegetation, which protect the bedrock from slaking along the inside of bends. Additionally, in the meandering stream, subaerially exposed mudstone clasts are often found to be disintegrating on the surface of bars. Taken together, these observations suggest that slaking allows for bedrock meandering in two fundamental ways. First, by rapidly disintegrating coarse hillslope-derived sediment that is deposited in the channel, slaking suppresses the negative feedback on lateral channel migration that would otherwise result from the buildup of talus along a retreating bedrock valley wall on the outside of a meander bend. Second, at cutbanks where scour exposes bare bedrock to drying, slaking weakens a layer of bank rock to the point where it can be eroded by clear-water flows. In these ways, slaking enables erosion into bedrock banks in response to curvature-driven fluid shear stress perturbations, as in alluvial rivers.
Abstract: Black diamonds with poor transparency due to an intensity of mineral inclusions and fractures are routinely traded in the gem market today. Although the inclusions and fractures are of natural origin this type of diamond is often heated to create a more uniform black color by further graphitizing these inclusions and fractures. Graphitization is often prominent at these fractures resulting in poor quality heavily fractured material. After nitrogen hydrogen is the most common impurity in natural diamond and is often responsible for a gem quality diamonds color. Color in diamond related or attributed to the hydrogen impurity can range from brown to green and gray. These colors are often undesirable to the gem trade and consumers. Recently GIA laboratories have seen a lot of faceted “Black” diamonds (graded as Fancy Black on GIA’s color scale) for identification. These diamonds are hydrogen rich and it is suspected that this material is treated (heated). Probably unattractive grayish green brown material that is virtually worthless in the gem trade before treatment. With such large quantities of this treated material available a serious threat and identification problem is posed to the Gem Diamond industry. Three faceted round cut hydrogen rich diamonds (0.30, 0.52 and 0.58 carats) colored by dense hydrogen clouds giving them a murky grayish appearance have been documented and systematically heated. A black color identical to that of the suspected treated black diamonds has been achieved, thus confirming this coloration treatment and new identification techniques to detect it. These treated black diamonds have a uniform color and lack the heavy fracturing and surface graphitization of typical treated black diamonds. Heating conditions and techniques will be discussed and we report on this new type of material and gem stone treatment.
Abstract: The possible presence of the high-density carbon polymorph with hexagonal symmetry known as "lonsdaleite" provides an important marker for shock impact events. It is typically considered to form as a metastable phase produced from graphite or other carbonaceous precursors. However, its existence has recently been called into question. Here we collected high-resolution synchrotron X-ray diffraction data for laboratory-shocked and natural impact diamonds that both show evidence for deviations from cubic symmetry, that would be consistent with the appearance of hexagonal stacking sequences. These results show that hexagonality can be achieved by shocking diamond as well as from graphite precursors. The diffraction results are analyzed in terms of a general model that describes intermediate stacking sequences between pure diamond (fully cubic) and "lonsdaleite" (fully hexagonal) phases, with provision made for ordered vs disordered stacking arrangements. This approach provides a "hexagonality index" that can be used to characterize and distinguish among samples that have experienced different degrees of shock or static high pressure-high temperature treatments. We have also examined the relative energetics of diamond and "lonsdaleite" structures using density functional theoretical (DFT) methods. The results set limits on the conditions under which a transformation between diamond and "lonsdaleite" structures can be achieved. Calculated Raman spectra provide an indicator for the presence of extended hexagonal stacking sequences within natural and laboratory-prepared samples. Our results show that comparable crystallographic structures may be developed by impact-generated shockwaves starting from ambient conditions using either of the two different allotropes of carbon (diamond, graphite). This broadens the scope for its occurrence in terrestrial and planetary systems.
Earth and Planetary Science Letters, Vol. 434, pp. 10-17.
Mantle
Tectonics
Abstract: It has been proposed that the spatial variations recorded in the geochemistry of hotspot lavas, such as the bilateral asymmetry recorded at Hawaii, can be directly mapped as the heterogeneous structure and composition of their deep-mantle source. This would imply that source-region heterogeneities are transported into, and preserved within, a plume conduit, as the plume rises from the deep-mantle to Earth's surface. Previous laboratory and numerical studies, which neglect density and rheological variations between different chemical components, support this view. However, in this paper, we demonstrate that this interpretation cannot be extended to distinct chemical domains that differ from surrounding mantle in their density and viscosity. By numerically simulating thermo-chemical mantle plumes across a broad parameter space, in 2-D and 3-D, we identify two conduit structures: (i) bilaterally asymmetric conduits, which occur exclusively for cases where the chemical effect on buoyancy is negligible, in which the spatial distribution of deep-mantle heterogeneities is preserved during plume ascent; and (ii) concentric conduits, which occur for all other cases, with dense material preferentially sampled within the conduit's centre. In the latter regime, the spatial distribution of geochemical domains in the lowermost mantle is not preserved during plume ascent. Our results imply that the heterogeneous structure and composition of Earth's lowermost mantle can only be mapped from geochemical observations at Earth's surface if chemical heterogeneity is a passive component of lowermost mantle dynamics (i.e. its effect on density is outweighed by, or is secondary to, the effect of temperature). The implications of our results for: (i) why oceanic crust should be the prevalent component of ocean island basalts; and (ii) how we interpret the geochemical evolution of Earth's deep-mantle are also discussed.
Journal of South African Institute of Mining and Metallurgy, Vol. 116, Aug. pp. 745-753.
Africa, South Africa
Deposit - Cullinan
Abstract: In 2012, Cullinan Diamond Mine began an expansion programme with the shaft deepening and development of access to the C-Cut 1 block at approximately 839 m below surface. The expansion programme is funded by a combination of bank loans and retained operating profit generated by the mine. Continuous production during deepening of the No. 1 Shaft, which is the rock hoisting shaft, was therefore critical for sustainability and efficiency as well as overall funding of the project. The deepening method, support design and verification, as well as learning outcomes pertaining to the extension of the No. 1 Shaft underneath the existing operating shaft are summarized, with emphasis on the importance of gaining some understanding of the shaft's host rock mass.
Earth and Planetary Science Letters, Vol. 456, pp. 134-145.
Mantle
Bridgemanite
Abstract: The lower mantle is estimated to be composed of mostly bridgmanite and a smaller percentage of ferropericlase, yet very little information exists for two-phase deformation of these minerals. To better understand the rheology and active deformation mechanisms of these lower mantle minerals, especially dislocation slip and the development of crystallographic preferred orientation (CPO), we deformed mineral analogs neighborite (NaMgF3, iso-structural with bridgmanite) and halite (NaCl, iso-structural with ferropericlase) together in the deformation-DIA at the Advanced Photon Source up to 51% axial shortening. Development of CPO was recorded in situ with X-ray diffraction, and information on microstructural evolution was collected using X-ray microtomography. Results show that when present in as little as 15% volume, the weak phase (NaCl) controls the deformation. Compared to single phase NaMgF3 samples, samples with just 15% volume NaCl show a reduction of CPO in NaMgF3 and weakening of the aggregate. Microtomography shows both NaMgF3 and NaCl form highly interconnected networks of grains. Polycrystal plasticity simulations were carried out to gain insight into slip activity, CPO evolution, and strain and stress partitioning between phases for different synthetic two-phase microstructures. The results suggest that ferropericlase may control deformation in the lower mantle and reduce CPO in bridgmanite, which implies a less viscous lower mantle and helps to explain why the lower mantle is fairly isotropic.
Geochemistry International, Vol. 54, 10, pp. 834-838.
South America, Brazil
Deposit - Sao Luiz
Abstract: We report cloudy micro- and nano-inclusions in a superdeep diamond from São-Luiz, Brazil which contains inclusions of ferropericlase (Mg, Fe)O and former bridgmanite (Mg, Fe)SiO3 and ringwoodite (Mg, Fe)2SiO4. Field emission-SEM and TEM observations showed that the cloudy inclusions were composed of euhedral micro-inclusions with grain sizes ranging from tens nanometers to submicrometers. Infrared absorption spectra of the cloudy inclusions showed that water, carbonate, and silicates were not major components of these micro- and nano-inclusions and suggested that the main constituent of the inclusions was infrared-inactive. Some inclusions were suggested to contain material with lower atomic numbers than that of carbon. Mineral phase of nano- and micro-inclusions is unclear at present. Microbeam X-ray fluorescence analysis clarified that the micro-inclusions contained transition metals (Cr, Mn, Fe, Co, Ni, Cu, Zn) possibly as metallic or sulfide phases. The cloudy inclusions provide an important information on the growth environment of superdeep diamonds in the transition zone or the lower mantle.
Abstract: This paper reviews the available information on the geology, mineralogy, and resources of the significant rare earth element (REE) deposits and occurrences in the Murmansk Region, northwest Russia. The region has one of the largest endowments of REE in the world, primarily the light REE (LREE); however, most of the deposits are of potential economic interest for the REE, only as by-products of other mining activity, because of the relatively low REE grade. The measured and indicated REE2O3 resources of all deposits in the region total 22.4, and 36.2 million tonnes, respectively. The most important resources occur in (1) the currently mined Khibiny titanite-apatite deposits, and (2) the Lovozero loparite-eudialyte deposit. The Kovdor baddeleyite-apatite-magnetite deposit is a potentially important resource of scandium. These deposits all have polymetallic ores, i.e., REE would be a by-product of P, Ti, and Al mining at Khibiny, Fe, Zr, Ta, and Nb mining at Lovozero, and Fe and Ti mining at Afrikanda. The Keivy block has potential for heavy REE exploitation in the peralkaline granite-hosted Yumperuaiv and Large Pedestal Zr-REE deposits and the nepheline syenite-hosted Sakharyok Zr-REE deposit. With the exception of the Afrikanda perovskite-magnetite deposit (LREE in perovskite) and the Kovdor baddeleyite-apatite-magnetite deposit (scandium in baddelyite), carbonatite-bearing complexes of the Murmansk Region appear to have limited potential for REE by-products. The sound transport, energy, and mining infrastructure of the region are important factors that will help ensure future production of the REE.
Abstract: This study presents compositional data for a statistically significant number (n = 180) of heated and quenched (recreated) carbonate melt inclusions trapped in magnetite and clinopyroxene in jacupirangite from Kerimasi volcano (Tanzania). On the basis of homogenization experiments for clinopyroxene-hosted melt inclusions and forsterite-monticellite-calcite phase relations, a range of 1000 to 900 °C is estimated for their crystallization temperatures. Petrographic observations and geochemical data show that during jacupirangite crystallization, a CaO-rich and alkali-"poor" carbonate melt (relative to Oldoinyo Lengai natrocarbonatite) existed and was entrapped in the precipitating magnetite, forming primary melt inclusions, and was also enclosed in previously crystallized clinopyroxene as secondary melt inclusions. The composition of the trapped carbonate melts in magnetite and clinopyroxene is very similar to the parental melt of Kerimasi calciocarbonatite; i.e., enriched in Na2O, K2O, F, Cl and S, but depleted in SiO2 and P2O5 relative to carbonate melts entrapped at an earlier stage and higher temperature (1050-1100 °C) during the formation of Kerimasi afrikandite. Significant compositional variation is shown by the major minerals of Kerimasi plutonic rocks (afrikandite, jacupirangite and calciocarbonatite). Magnetite and clinopyroxene in the jacupirangite are typically transitional in composition between those of afrikandite and calciocarbonatite. These data suggest that the jacupirangite represents an intermediate stage between the formation of afrikandite and calciocarbonatite. Jacupirangite most probably formed when immiscible silicate and carbonate melts separated from the afrikandite body, although the carbonate melt was not separated completely from the silicate melt fraction. In general, during the evolution of the carbonate melt at Kerimasi, concentrations of P2O5 and SiO2 decreased, whereas volatile content (alkalis, S, F, Cl and H2O) increased. Volatiles were incorporated principally in nyerereite, shortite, burbankite, nahcolite and sulfohalite as identified by Raman spectrometry. These extremely unstable minerals cannot be found in the bulk rock, because of alteration by secondary processes. On the basis of these data, an evolutionary model is developed for Kerimasi plutonic rocks.
Abstract: This study presents compositional data for a statistically significant number (n = 180) of heated and quenched (recreated) carbonate melt inclusions trapped in magnetite and clinopyroxene in jacupirangite from Kerimasi volcano (Tanzania). On the basis of homogenization experiments for clinopyroxene-hosted melt inclusions and forsterite-monticellite-calcite phase relations, a range of 1000 to 900 °C is estimated for their crystallization temperatures. Petrographic observations and geochemical data show that during jacupirangite crystallization, a CaO-rich and alkali-"poor" carbonate melt (relative to Oldoinyo Lengai natrocarbonatite) existed and was entrapped in the precipitating magnetite, forming primary melt inclusions, and was also enclosed in previously crystallized clinopyroxene as secondary melt inclusions. The composition of the trapped carbonate melts in magnetite and clinopyroxene is very similar to the parental melt of Kerimasi calciocarbonatite; i.e., enriched in Na2O, K2O, F, Cl and S, but depleted in SiO2 and P2O5 relative to carbonate melts entrapped at an earlier stage and higher temperature (1050-1100 °C) during the formation of Kerimasi afrikandite. Significant compositional variation is shown by the major minerals of Kerimasi plutonic rocks (afrikandite, jacupirangite and calciocarbonatite). Magnetite and clinopyroxene in the jacupirangite are typically transitional in composition between those of afrikandite and calciocarbonatite. These data suggest that the jacupirangite represents an intermediate stage between the formation of afrikandite and calciocarbonatite. Jacupirangite most probably formed when immiscible silicate and carbonate melts separated from the afrikandite body, although the carbonate melt was not separated completely from the silicate melt fraction. In general, during the evolution of the carbonate melt at Kerimasi, concentrations of P2O5 and SiO2 decreased, whereas volatile content (alkalis, S, F, Cl and H2O) increased. Volatiles were incorporated principally in nyerereite, shortite, burbankite, nahcolite and sulfohalite as identified by Raman spectrometry. These extremely unstable minerals cannot be found in the bulk rock, because of alteration by secondary processes. On the basis of these data, an evolutionary model is developed for Kerimasi plutonic rocks.
Abstract: Magmas forming large igneous provinces (LIP) on continents are generated by extensive melting in the deep crust and underlying mantle and associated with break-up of ancient supercontinents, followed by formation of a new basaltic crust in the mid-oceanic rifts. A lack of the unifying model in understanding the sources of LIP magmatism is justified by lithological and geochemical complexity of erupted magmas on local (e.g. a cross-section) and regional (a single and different LIP) scales. Moreover, the majority of LIP rocks do not fit general criteria for recognizing primary/primitive melts (i.e. < 8 wt% MgO and absence of high-Fo olivine phenocrysts). This study presents the mineralogical (olivine, Cr-spinel, orthopyroxene), geochemical (trace elements and Sr-Nd-Hf-Pb isotopes) and olivine-hosted melt inclusion compositional characteristics of a single primitive (16 wt% MgO), high-Ti (2.5 wt% TiO2) picrite with high-Mg olivine (up to 91 mol% Fo) from the Letaba Formation in the ~ 180 Ma Karoo LIP (south Africa). The olivine compositions (unusually high ?18O (6.17‰), high NiO (0.36-0.56 wt%) and low MnO and CaO (0.12-0.20 and 0.12-0.22 wt%, respectively)) are used to argue for a non-peridotitic mantle source. This is supported by the enrichment of the rock and melts in most incompatible trace elements and depletion in heavy rare earth elements (e.g. high Gd/Yb) that reflects residual garnet in the source of melting. The radiogenic isotopes resemble those of the model enriched mantle (EM-1) and further argue for a long-term enrichment of the source in incompatible trace elements. The enriched high-Ti compositions, strongly fractionated incompatible trace elements, presence of primitive olivine and high-Cr spinel in the Letaba picrites are closely matched by olivine-phyric rocks from the ~ 260 Ma Emeishan (Yongsheng area, SW China) and ~ 250 Ma Siberian (Maimecha-Kotuy region, N Siberia) LIPs. However, many other compositional parameters (e.g. trace element and ?18O compositions of olivine phenocrysts, Fe2 +/Fe3 + in Cr-spinel, Sr-Nd-Hf isotope ratios) only partially overlap or even diverge. We thus imply that parental melts of enriched picritic rocks with forsteritic olivine from three major continental igneous provinces - Karoo, Emeishan and Siberia cannot be assigned to a common mantle source and similar melting conditions. The Karoo picrites also exhibit some mineralogical and geochemical similarities with rocks and glasses in the south Atlantic Ridge and adjacent fracture zones. The geodynamic reconstructions of the continental plate motions since break-up of the Gondwanaland in the Jurassic support the current position of the source of the Karoo magmatism in the southernmost Atlantic. Co-occurrence of modern and recent anomalous rocks with normal mid-ocean ridge basalts in this region can be related to blocks/rafts of the ancient lithosphere, stranded in the ambient upper mantle and occasionally sampled by rifting-related decompressional melting.
Abstract: In addition to a series of finds of diamond in mafic volcanic and ultramafic massive rocks in Kamchatka, Russia, a carbonado-like diamond aggregate was identified in recent lavas of the active Avacha volcano. This aggregate differs from ‘classic carbonado’ by its location within an active volcanic arc, well-formed diamond crystallites, and cementing by Si-containing aggregates rather than sintering. The carbonado-like aggregate contains inclusions of Mn-Ni-Si-Fe alloys, native ?-Mn, tungsten and boron carbides, which are uncommon for both carbonado and monocrystalline diamonds. Mn-Ni-Si-Fe alloys, trigonal W2C and trigonal B4C are new mineral species that were not previously found in the natural environment. The formation of the carbonado-like diamond aggregate started with formation at ~ 850-1000 °C of tungsten and boron carbides, Mn-Ni-Si-Fe alloys and native ?-Mn, which were used as seeds for the subsequent crystallization of micro-sized diamond aggregate. In the final stage, the diamond aggregate was cemented by amorphous silica, tridymite, ?-SiC, and native silicon. The carbonado-like aggregate was most likely formed at near-atmospheric pressure conditions via the CVD mechanism during the course or shortly after one of the volcanic eruption pulses of the Avacha volcano. Volcanic gases played a great role in the formation of the carbonado-like aggregate.
Mineralogy and Petrology, in press available, 12p.
South America, Brazil
Deposit - Juina
Abstract: In addition to ultramafic and mafic associations, a primary natrocarbonatitic association occurs in the lower mantle. To date, it was identified as inclusions in diamonds from the Juina area, Mato Grosso State, Brazil. It comprises almost 50 mineral species: carbonates, halides, fluorides, phosphates, sulfates, oxides, silicates, sulfides and native elements. In addition, volatiles are present in this association. Among oxides, coexisting periclase and wüstite were identified, pointing to the formation of the natrocarbonatitic association at a depth greater than 2000 km. Some iron-rich (Mg,Fe)O inclusions in diamond are attributed to the lowermost mantle. The initial lower-mantle carbonatitic melt formed as a result of low-fraction partial melting of carbon-containing lower-mantle material, rich in P, F, Cl and other volatile elements, at the core-mantle boundary. During ascent to the surface, the initial carbonatitic melt dissociated into two immiscible parts, a carbonate-silicate and a chloride-carbonate melt. The latter melt is parental to the natrocarbonatitic lower-mantle association. Diamonds with carbonatitic inclusions were formed in carbonatitic melts or high-density fluids.
Abstract: Abstract
In addition to a series of finds of diamond in mafic volcanic and ultramafic massive rocks in Kamchatka, Russia, a carbonado-like diamond aggregate was identified in recent lavas of the active Avacha volcano. This aggregate differs from ‘classic carbonado’ by its location within an active volcanic arc, well-formed diamond crystallites, and cementing by Si-containing aggregates rather than sintering. The carbonado-like aggregate contains inclusions of Mn-Ni-Si-Fe alloys, native ?-Mn, tungsten and boron carbides, which are uncommon for both carbonado and monocrystalline diamonds. Mn-Ni-Si-Fe alloys, trigonal W2C and trigonal B4C are new mineral species that were not previously found in the natural environment. The formation of the carbonado-like diamond aggregate started with formation at ~ 850-1000 °C of tungsten and boron carbides, Mn-Ni-Si-Fe alloys and native ?-Mn, which were used as seeds for the subsequent crystallization of micro-sized diamond aggregate. In the final stage, the diamond aggregate was cemented by amorphous silica, tridymite, ?-SiC, and native silicon. The carbonado-like aggregate was most likely formed at near-atmospheric pressure conditions via the CVD mechanism during the course or shortly after one of the volcanic eruption pulses of the Avacha volcano. Volcanic gases played a great role in the formation of the carbonado-like aggregate.
ASEG-PESA-AIG 2016 25th Geophysical Conference, 4p. Pdf
Canada, Northwest Territories
Deposit - Tli Kwi Cho
Abstract: In this study, we revisit three airborne EM surveys over Tli Kwi Cho (TKC). These consist of a frequency domain DIGHEM data set, and two time domain surveys, VTEM and AeroTEM. Negative transients have been recorded in both of the time domain surveys and we interpret these as arising from chargeable bodies. The kimberlite pipes are referred to as DO-27 and DO-18. We look in more detail at the transient data and apply the ATEM-IP inversion procedure to recover a 3D pseudo-chargeability distribution. Important components of the analysis involve estimating a background conductivity for the region. For DO-27 we have used a 3D parametric inversion to recover the conductivity from TEM data. The IP signal for the inversion is obtained by subtracting the time domain responses estimated by EM inversion from the observed background signal. This process also removes EM coupling noise that might be contaminating the data. The resultant IP data are inverted with a linear inverse approach using the sensitivity from the background conductivity. This yields a 3D model of pseudo-chargeability.
Journal of African Earth Sciences, Vol. 113, pp. 35-50.
Africa, Cameroon
Geochemistry
Abstract: Trace element abundances in three indicator minerals (corundum, chrysoberyl, and zircon grains) from the western Mamfe gem placers, as determined by LA-ICP-MS analytical techniques, are shown to be sensitive to their crystallization conditions and source rock types. Corundum is dominantly composed of Al (standardized at 529,300 ppm), Fe (2496-12,899 ppm), and Ti (46-7070 ppm). Among element ratios, Fe/Mg (73-1107), Fe/Ti (0.5-245.0), Ti/Mg (1-175), and Ga/Mg (4-90) are generally higher whereas, Cr/Ga (<0.072) is low. The Fe (?12,899), Ga (?398), Mg (2-62), Cr (1.1-33.0), and V (3.0-93.0) contents (in ppm) mostly typify corundum grains formed in magmatic rocks, although some are metamorphic affiliated. A very higher Ti and significantly low Ga, Ta and Nb contents in some blue grains, suggest interesting concentrations of those high-tech metals in their source rocks. Chrysoberyl is dominantly composed of Al (standardized at 425,000 ppm) and Be (62701-64371 ppm). Iron (7605-9225 ppm), Sn (502-3394 ppm), and Ti (33-2251 ppm) contents are high, whereas Ga (333-608 ppm), Ta (<456.0 ppm), and Nb (<3.0 ppm) are significantly low. The high (Be and Sn) and significantly low Ga-Rb abundances, and Ta > Nb in the western Mamfe chrysoberyls show that they were crystallized in granitic pegmatites, with some of those source rocks being enriched in Ta and Sn. Zirconium oxide (ZrO2: standardized at 66.1 wt.%)) is the only major oxide in analysed coarse-grained zircons. Within the minor elementary suites: Hf (4576-12,565 ppm) and Y (48-2805 ppm) contents are significantly high. The trace element suites include: Th (7-1565 ppm), U (13-687 ppm), and ?REE (50-2161 ppm), whose values are significantly low. The (Yb/Sm)N, Ce/Ce*, and Eu/Eu* anomalies range from 1.0 to 227.0, 0 to 308, and 0.08 to 1.7 respectively. They are Hf-Y-HREE enriched and depleted zircons mainly crystallized in magmatic oxidized environments. They were mainly sorted from granitoids, syenites and kimberlites.
Doklady Earth Sciences, Vol. 465, 1, pp. 1135-1138.
Russia
Deposit - Kimozero
Abstract: Geological and structural mapping of Paleoproterozoic Kimozero kimberlite with account for lithological facies and geochemical specialization provides evidence for the multiphase structure of the kimberlite pipe, which underwent fragmentation as a result of shear–faulting deformations. Two geochemical types of kimberlite (magnesium and carbonate) are distinguished.
Abstract: Here we present major and trace element data for garnet and clinopyroxene from mantle-derived peridotite xenoliths of the Grib kimberlite, the Arkhangelsk diamond province, Russia, and provide new insights into the metasomatic processes that occur within the subcontinental lithospheric mantle (SCLM) during the kimberlite generation and ascent. The mantle xenoliths examined in this study are both coarse and sheared garnet peridotites and consist of olivine, orthopyroxene, clinopyroxene, garnet with minor ilmenite, magnetite, and Cr-spinel. Based on garnet and clinopyroxene composition, two groups of peridotite are recognized. One group contains high-Ti, light rare earth elements (LREE) enriched garnets and low-Mg# clinopyroxenes with low (La/Sm)n (C1 chondrite-normalized) values. This mineral assemblage was in equilibrium with a high-temperature carbonate-silicate metasomatic agent, presumably, a protokimberlite melt. Pressure-temperature (P-T) estimates (T = 1220 °C and P = 70 kbar) suggest that this metasomatic event occurred at the base of the SCLM. Another group contains low-Ti garnet with normal to sinusoidal rare earth elements (REE) distribution patterns and high-Mg# clinopyroxenes with wide range of (La/Sm)n values. The geochemical equilibrium between garnet and clinopyroxene coupled with their REE composition indicates that peridotite mantle experienced metasomatic transformation by injection of a low-Ti (after crystallizations of the ilmenite megacrysts) kimberlite melt that subsequently percolated through a refractory mantle column. Peridotites of this group show a wide range of P-T estimates (T = 730-1070 °C and P = 22-44 kbar). It is suggested that evolution of a kimberlite magma from REE-enriched carbonate-bearing to carbonate-rich ultramafic silicate compositions with lower REE occurs during the ascent and interaction with a surrounding lithospheric mantle, and this process leads to metasomatic modification of the SCLM with formation of both high and low-Ti garnets and clinopyroxene widely varying in Mg# and (La/Sm)n values.
Abstract: Lamproites are mineralogically complex rocks and their bulk rock geochemistry is not for characterization of their parental magmas (Mitchell and Bergman, [1]). Characterization is best accomplished by consideration of their typomorphic mineralogy. We have investigated nine dykes from Vattikod (VL1:Vl8 and VL10). The mineral assemblage and their compositions are comparable to those of lamproites in terms of the presence of phlogopite (Ti-rich, Al-poor phlogopite and tetraferriphlogopite); amphiboles (potassic-arfvedsonite, potassic-richterite, potassic-ferro-richterite, potassic-katophorite, Ti- rich potassic-katophorite, Ti-rich potassic-magnesio-katophorite); Al-poor pyroxene; feldspars (K- feldspar, Ba-K-feldspar and Na-feldspar), spinels (chromite-magnetite and qandilite-ulvÖspinel-ZnFe2O4). These dykes have also undergone varied degrees of deuteric alteration as shown by the development of secondary phases such as titanite, allanite, hydro-zircon, calcite, chlorite, quartz and cryptocrystalline SiO2. We have classified the Vattikod dyke on the basis of their typomorphic major mineralogy in conjunction with alteration affects as: Group 1 (VL1); Group 2 (VL2 and VL3); Group 3 (VL4 and VL5); Group 4 (VL6, VL7 and VL8); and Group 5 (VL10). Group 2 dykes are pseudoleucite-amphibole-lamproite; Group 3 dykes are pseudoleucite-phlogopite-lamproite; Group 4 dykes are pseudoleucite-phlogopite- amphibole-lamproite. The Group 1 dyke is completely altered and the precursor mineralogy cannot be identified. Group 5 dyke is also extensively altered but contains fresh euhedral apatite microphenocrysts together with pseudomorphs after leucite and is classified as a pseudoleucite-apatite-(phlogopite?) lamproite. It is suggested that the Vattikod lamproites represent a spectrum of modal variants of lamproite produced by the differentiation and crystallization of a common parental peralkaline potassic magma. The near-linear disposition of Deformed Alkaline Rocks and Carbonatites commonly known as DARC’s (Burke and Khan, [2]) and lamproites in eastern India implies a relationship with subduction-related processes (Das Sharma & Ramesh, [3]; Gurmeet Kaur & Mitchell, [4]). We propose that the Vattikod and other lamproites in eastern India emplaced at 1100-1450 Ma are possible manifestations of subduction- related alkaline magmatism along the Eastern Ghats Mobile Belt, in contrast to extension-related anorogenic lamproite magmatism related to supercontinent(s) break-up as has been suggested for Ramadugu and other Dharwar Craton lamproites.
Abstract: Whether subduction initiation is a forced or spontaneous process is a fundamental geological problem. Using drill core data from the Amami Sankaku basin, Arculus et al.1 suggest that subduction in the Izu–Bonin–Mariana arc began spontaneously. Here we argue that the evidence presented favours neither spontaneous nor forced
Abstract: The formation of the Earth's continents is enigmatic. Volcanic arc magmas generated above subduction zones have geochemical compositions that are similar to continental crust, implying that arc magmatic processes played a central role in generating continental crust. Yet the deep crust within volcanic arcs has a very different composition from crust at similar depths beneath the continents. It is therefore unclear how arc crust is transformed into continental crust. The densest parts of arc lower crust may delaminate and become recycled into the underlying mantle. Here we show, however, that even after delamination, arc lower crust still has significantly different trace element contents from continental lower crust. We suggest that it is not delamination that determines the composition of continental crust, but relamination. In our conceptual model, buoyant magmatic rocks generated at arcs are subducted. Then, upon heating at depth, they ascend and are relaminated at the base of the overlying crust. A review of the average compositions of buoyant magmatic rocks — lavas and plutons — sampled from the Aleutians, Izu-Bonin-Marianas, Kohistan and Talkeetna arcs reveals that they fall within the range of estimated major and trace elements in lower continental crust. Relamination may thus provide an efficient process for generating lower continental crust.
Geological Society of London Special Publication: Magmatic Rifting and Active Volcanism, Vol. 420, pp. 11-30.
Africa
Global finite element model
Abstract: Continental rifting has a fundamental role in the tectonic behaviour of the Earth, shaping the surface we live on. Although there is not yet a consensus about the dominant mechanism for rifting, there is a general agreement that the stresses required to rift the continental lithosphere are not readily available. Here we use a global finite element model of the lithosphere to calculate the stresses acting on Africa. We consider the stresses induced by mantle flow, crustal structure and topography in two types of models: one in which flow is exclusively driven by the subducting slabs and one in which it is derived from a shear wave tomographic model. The latter predicts much larger stresses and a more realistic dynamic topography. It is therefore clear that the mantle structure beneath Africa plays a key part in providing the radial and horizontal tractions, dynamic topography and gravitational potential energy necessary for rifting. Nevertheless, the total available stress (c. 100 MPa) is much less than that needed to break thick, cold continental lithosphere. Instead, we appeal to a model of magma-assisted rifting along pre-existing weaknesses, where the strain is localized in a narrow axial region and the strength of the plate is reduced significantly. Mounting geological and geophysical observations support such a model.
Abstract: Constraining the origin and history of very ancient detrital zircons has unique potential for furthering our knowledge of Earth's very early crust and Hadean geodynamics. Previous applications of the Ti-in-zircon thermometer to >4 Ga zircons have identified a population with relatively low crystallization temperatures (Tzirxtln) of ?685 °C. This could possibly indicate wet minimum-melting conditions producing granitic melts, implying very different Hadean terrestrial geology from that of other rocky planets. Here we report the first comprehensive ion microprobe study of zircons from a transect through the differentiated Sudbury impact melt sheet (Ontario, Canada). The new zircon Ti results and corresponding Tzirxtln fully overlap with those of the Hadean zircon population. Previous studies that measured Ti in impact melt sheet zircons did not find this wide range because they analyzed samples only from a restricted portion of the melt sheet and because they used laser ablation analyses that can overestimate true Ti content. It is important to note that internal differentiation of the impact melt is likely a prerequisite for the observed low Tzirxtln in zircons from the most evolved rocks. On Earth, melt sheet differentiation is strongest in subaqueous impact basins. Thus, not all Hadean detrital zircon with low Ti necessarily formed during melting at plate boundaries, but at least some could also have crystallized in melt sheets caused by intense meteorite bombardment of the early, hydrosphere-covered protocrust.
Geological Society of London Special Publication Supercontinent Cycles through Earth History., Vol. 424, pp. 265-288.
Mantle
Supercontinents
Abstract: Mechanisms that can explain the Mesozoic motion of Pangaea in a palaeomagnetic mantle reference frame may also be able to explain its breakup. Calculations indicate that Pangaea moved along a non-rigid path in the mantle frame between the late Triassic and early Jurassic. The breakup of Pangaea may have happened as a response to this non-rigid motion. Tectonic forces applied to the margins of Pangaea as a consequence of subduction at its peripheries can explain both the motion and deformation of Pangaea with a single mechanism. In contrast, mantle forces applied to the base of Pangaea appear to be inconsistent with the kinematic constraints and do not explain the change in supercontinent motion that accompanied the breakup event. Top-down plate tectonics are inferred to have caused the breakup of Pangaea. Strong coupling between the mantle and lithosphere may not have been the case during the Phanerozoic eon when the Pangaean supercontinent formed and subsequently dispersed.
Kilian, T.M., Bleeker, W., Chamberlain. K., Evans, D.A.D., Cousens, B.
Paleomagnetism, geochronology and geochemistry of the Paleoproterozoic Rabbit Creek and Powder River dyke swarms: implications for Wyoming in supercraton Superia.
Geological Society of London Special Publication Supercontinent Cycles through Earth History., Vol. 424, pp. 15-45.
Abstract: Paleoproterozoic suture zones mark the formation of supercontinent Nuna and provide a record of North America's assembly. Conspicuously young ages (ca. 1.715 Ga) associated with deformation in southeast Wyoming craton argue for a more protracted consolidation of Laurentia, long after peak metamorphism in the Trans-Hudson orogen. Using paleomagnetic data from the newly dated 1899 ± 5 Ma Sourdough mafic dike swarm (Wyoming craton), we compare the relative positions of Wyoming, Superior, and Slave cratons before, during, and after peak metamorphism in the Trans-Hudson orogen. With these constraints, we refine a collisional model for Laurentia that incorporates Wyoming craton after Superior and Slave cratons united, redefining the Paleoproterozoic sutures that bind southern Laurentia.
Abstract: Trapped-charge dating methods including luminescence and electron spin resonance dating have high potential as low temperature (< 100 °C) thermochronometers. Despite an early proof of concept almost 60 years ago, it is only in the past two decades that thermoluminescence (TL), electron-spin-resonance (ESR), and optically stimulated luminescence (OSL), have begun to gain momentum in geological thermochronometry and thermometry applications. Here we review the physics of trapped-charge dating, the studies that led to its development and its first applications for deriving palaeo-temperatures and/or continuous cooling histories. Analytical protocols, which enable the derivation of sample specific kinetic parameters over laboratory timescales, are also described. The key limitation of trapped-charge thermochronometry is signal saturation, which sets an upper limit of its application to < 1 Ma, thus restricting it to rapidly exhuming terrains (> 200 °C Ma? 1), or elevated-temperature underground settings (> 30 °C). Despite this limitation, trapped-charge thermochronometry comprises a diverse suite of versatile methods, and we explore potential future applications and research directions.
Physics and Chemistry of Minerals, in press available 10p.
Technology
Impact diamond
Abstract: High-resolution transmission electron microscopy was applied for the detailed nanostructural investigation of Popigai impact diamonds with the aim of revealing the nature of the amorphous carbon of the matrix. The successful application of two complementary specimen preparation methods, focused ion beam (FIB) milling and mechanical cleavage, allowed direct imaging of nanotwinned nanodiamond crystals embedded in a native amorphous carbon matrix for the first time. Based on its stability under the electron beam, native amorphous carbon can be easily distinguished from the amorphous carbon layer produced by FIB milling during specimen preparation. Electron energy loss spectroscopy of the native amorphous carbon revealed the dominance of sp2-bonded carbon and the presence of a small amount of oxygen. The heterogeneous size distribution and twin density of the nanodiamond crystals and the structural properties of the native amorphous carbon are presumably related to non-graphitic (organic) carbon precursor material.
Physics and Chemistry of Minerals, Vol. 43, 9, pp. 661-670.
Russia
Impact diamonds
Abstract: High-resolution transmission electron microscopy was applied for the detailed nanostructural investigation of Popigai impact diamonds with the aim of revealing the nature of the amorphous carbon of the matrix. The successful application of two complementary specimen preparation methods, focused ion beam (FIB) milling and mechanical cleavage, allowed direct imaging of nanotwinned nanodiamond crystals embedded in a native amorphous carbon matrix for the first time. Based on its stability under the electron beam, native amorphous carbon can be easily distinguished from the amorphous carbon layer produced by FIB milling during specimen preparation. Electron energy loss spectroscopy of the native amorphous carbon revealed the dominance of sp2-bonded carbon and the presence of a small amount of oxygen. The heterogeneous size distribution and twin density of the nanodiamond crystals and the structural properties of the native amorphous carbon are presumably related to non-graphitic (organic) carbon precursor material.
Abstract: Zirconium and hafnium are valuable strategic metals which are in high demand in industry. The Zr and Hf contents are elevated in the final products of magmatic differentiation of alkali carbonatite rocks in the Polar Siberia region (Guli Complex) and Ukraine (Chernigov Massif). Early pyroxene fractionation led to an increase in the Zr/Hf ratio in the evolution of the ultramafic–alkali magmatic system due to a higher distribution coefficient of Hf in pyroxene with respect to Zr. The Rayleigh equation was used to calculate a quantitative model of variation in the Zr/Hf ratio in the development of the Guli magmatic system. Alkali carbonatite rocks originated from rare element-rich mantle reservoirs, in particular, the metasomatized mantle. Carbonated mantle xenoliths are characterized by a high Zr/Hf ratio due to clinopyroxene development during metasomatic replacement of orthopyroxene by carbonate fluid melt.
Developments in FTIR spectroscopy of diamond ( part 1): nitrogen aggregation in zoned diamonds, the timing of diamond growth and the thermal history of the lithosphere.
Africa, Zimbabwe, Australia, South America, Brazil
Deposit - Murowa, Argyle, Machado River
Abstract: Fourier Transform Infrared (FTIR) spectroscopy is a commonly-used technique for investigating diamonds, that gives the most useful information if spatially-resolved measurements are used. In this paper we discuss the best way to acquire and present FTIR data from diamonds, using examples from Murowa (Zimbabwe), Argyle (Australia) and Machado River (Brazil). Examples of FTIR core-to-rim line scans, maps with high spatial resolution and maps with high spectral resolution that are fitted to extract the spatial variation of different nitrogen and hydrogen defects are presented. Model mantle residence temperatures are calculated from the concentration of A and B nitrogen-containing defects in the diamonds using known times of annealing in the mantle. A new, two-stage thermal annealing model is presented that better constrains the thermal history of the diamond and that of the mantle lithosphere in which the diamond resided. The effect of heterogeneity within the analysed FTIR volume is quantitatively assessed and errors in model temperatures that can be introduced by studying whole diamonds instead of thin plates are discussed. The spatial distribution of VN3H hydrogen defects associated with the 3107 cm? 1 vibration does not follow the same pattern as nitrogen defects, and an enrichment of VN3H hydrogen at the boundary between pre-existing diamond and diamond overgrowths is observed. There are several possible explanations for this observation including a change in chemical composition of diamond forming fluid during growth or kinetically controlled uptake of hydrogen.
Progress in Earth and Planetary Science, Vol. 3, 25, Aug. 22
Mantle
Experimental petrology
Abstract: The Accessible Silicate Earth (ASE) has a higher 142Nd/144Nd ratio than most chondrites. Thus, if the Earth is assumed to have formed from these chondrites, a complement low-142Nd/144Nd reservoir is needed. Such a low-142Nd/144Nd reservoir is believed to have been derived from a melt in the early Earth and is called the Early Enriched Reservoir (EER). Although the major element composition of the EER is crucial for estimating its chemical and physical properties (e.g., density) and is also essential for understanding the origin and fate of the EER, which are both major factors that determine the present composition of the Earth, it has not yet been robustly established. In order to determine the major element composition of the EER, we estimated the age and pressure-temperature conditions to form the EER that would best explain its Nd isotopic characteristics, based on Sm-Nd partitioning and its dependence on pressure, temperature, and melting phase relations. Our estimate indicates that the EER formed within 33.5 Myr of Solar System formation and at near-solidus temperatures and shallow upper-mantle pressures. We then performed high-pressure melting experiments on primitive peridotite to determine the major element composition of the EER at estimated temperature at 7 GPa and calculated the density of the EER. The result of our experiments indicates that the near-solidus melt is iron-rich komatiite. The estimated density of the near-solidus melt is lower than that of the primitive peridotite, suggesting that the EER melt would have ascended in the mantle to form an early crust. Given that high mantle potential temperatures are assumed to have existed in the Hadean, it follows that the EER melt was generated at high pressure and, therefore, its composition would have been picritic to komatiitic. As the formation age of the EER estimated in our study precedes the last giant, lunar-forming impact, the picritic to komatiitic crust (EER) would most likely have been ejected from the Earth by the last giant impact or preceding impacts. Thus, the EER has been lost, leaving the Earth more depleted than its original composition.
Abstract: The occurrence, morphology, and composition of rinkite are considered against the background of zoning in the Khibiny pluton. Accessory rinkite is mostly characteristic of foyaite in the outer part of pluton, occurs somewhat less frequently in foyaite and rischorrite in the central part of pluton, even more sparsely in foidolites and apatite-nepheline rocks, and sporadically in fenitized xenoliths of the Lovozero Formation. The largest, up to economic, accumulations of rinkite are related to the pegmatite and hydrothermal veins, which occur in nepheline syenite on both sides of the Main foidolite ring. The composition of rinkite varies throughout the pluton. The Ca, Na, and F contents in accessory rinkite and amorphous products of its alteration progressively increase from foyaite and fenitized basalt of the Lovozero Formation to foidolite, rischorrite, apatite-nepheline rocks, and pegmatite-hydrothermal veins.
Contributions to Mineralogy and Petrology, Vol. 171, 2p.
Mantle
Harzburgite
Abstract: Using the Hill et al. (Contrib Mineral Petrol 169:13, 2015. doi:10.1007/s00410-014-1102-7) modeling technique, we have tested the idea of Ivanic et al. (Contrib Mineral Petrol 164:505-520, 2012) that decompression and metamorphic re-equilibration of garnet with spinel causes garnet zoning perpendicular to the Cr-Ca harzburgitic trend in garnet composition. The modeling confirms that garnet zoning across the harzburgitic trend cannot form without spinel buffering. The harzburgitic trend is very rare because it results from extreme compositional heterogeneity of the mantle at the same depth. In contrast, the common lherzolitic trend requires less diversity in the bulk composition of the mantle, as it can be established with only a few samples of metamorphically re-equilibrated mantle peridotite deriving from a variety of depths.
Abstract: We reconstructed the spatial distribution of eclogites in the cratonic mantle based on thermobarometry for ~ 240 xenoliths in 4 kimberlite pipes from different parts of the Slave craton (Canada). The accuracy of depth estimates is ensured by the use of a recently calibrated thermometer, projection of temperatures onto well-constrained local peridotitic geotherms, petrological screening for unrealistic temperature estimates, and internal consistency of all data. The depth estimates are based on new data on mineral chemistry and petrography of 148 eclogite xenoliths from the Jericho and Muskox kimberlites of the northern Slave craton and previously reported analyses of 95 eclogites from Diavik and Ekati kimberlites (Central Slave). The majority of Northern Slave eclogites of the crustal, subduction origin occurs at 110-170 km, shallower than in the majority of the Central Slave crustal eclogites (120-210 km). The identical geochronological history of these eclogite populations and the absence of steep suture boundaries between the central and northern Slave craton suggest the lateral continuity of the mantle layer relatively rich in eclogites. We explain the distribution of eclogites by partial preservation of an imbricated and plastically dispersed oceanic slab formed by easterly dipping Proterozoic subduction. The depths of eclogite localization do not correlate with geophysically mapped discontinuities. The base of the depleted lithosphere of the Slave craton constrained by thermobarometry of peridotite xenoliths coincides with the base of the thickened lithospheric slab, which supports contribution of the recycled oceanic lithosphere to formation of the cratonic root. Its architecture may have been protected by circum-cratonic subduction and shielding of the shallow Archean lithosphere from the destructive asthenospheric metasomatism.
Journal of Volcanology and Geothermal Research, in press available 19p.
Russia
Deposit - Udachnaya East
Abstract: The Udachnaya East kimberlite is characterized by the presence of chlorides, sulfates and alkali carbonates. This highly atypical mineralogy underpinned a model for an anhydrous alkali-rich primary kimberlite melt, despite the absence of petrographic studies providing textural context to the exotic minerals. The present work documents the petrography of the Udachnaya East kimberlite in order to address this problem. The pipe comprises two varieties of Fort-a-la-Corne type pyroclastic kimberlite, olivine-rich and magmaclast-rich, and coherent kimberlite. These kimberlites entrain xenoliths of limestones, altered shales and siltstones, halite-dominated rocks, dolomites, and coarse calcite rocks. The distinct varieties of the Udachnaya East kimberlite carry different populations of crustal xenoliths, which partially control the mineralogy of the host kimberlite. In magmaclast-rich pyroclastic kimberlite, where halite is absent from the crustal xenoliths, it is not observed in the interclast matrix, or within the magmaclasts. Halite occurs in the interclast matrix of olivine-rich pyroclastic kimberlite, where halite xenoliths are common. Large, ~ 30 cm halite xenoliths are uniquely restricted to the coherent kimberlite and show a strong reaction with it. The halite xenoliths are sourced from depths of ? 1500 to ? 630 m, where carbonate beds host multiple karst cavities filled with halite and gypsum and occasional sedimentary evaporites. The style of secondary mineralization at Udachnaya depends on whether the kimberlite is coherent or pyroclastic. Shortite, pirssonite and other alkali carbonates replacing calcite and possibly serpentine are abundant only in porous pyroclastic kimberlites of both types and in their shale/siltstone xenoliths. The lower porosity of the coherent kimberlite prevented the interaction of kimberlite with Na brines. Serpentinization localized around halite xenoliths started at temperatures above 500 °C, as indicated by its association with high-temperature iowaite. The model of the “dry” Na and Cl-rich primary kimberlite melt is invalidated on the basis of 1) the restriction of exotic salt minerals to certain kimberlite types and xenoliths; and 2) the absence of halite-rich melt inclusions in olivine of coherent kimberlite.
Abstract: Clear evidence for subduction-induced metamorphism, and thus the operation of plate tectonics on the ancient Earth has been lacking. Theoretical calculations indicate that we may have been looking for something that cannot exist.
Abstract: Alluvial diamonds from the Kasai River, Democratic Republic of the Congo (DRC) are sourced from Cretaceous kimberlites of the Lucapa graben in Angola. Analysis of 40 inclusion-bearing diamonds provides new insights into the characteristics and evolution of ancient lithospheric mantle of the Congo craton. Silicate inclusions permitted us to classify diamonds as peridotitic, containing Fo91-95 and En92-94, (23 diamonds, 70% of the suite), and eclogitic, containing Cr-poor pyrope and omphacite with 11-27% jadeite (6 diamonds, 18% of the suite). Fluid inclusion compositions of fibrous diamonds are moderately to highly silicic, matching compositions of diamond-forming fluids from other DRC diamonds. Regional homogeneity of Congo fibrous diamond fluid inclusion compositions suggests spatially extensive homogenization of Cretaceous diamond forming fluids within the Congo lithospheric mantle. In situ cathodoluminescence, secondary ion mass spectrometry and Fourier transform infrared spectroscopy reveal large heterogeneities in N, N aggregation into B-centers (NB), and ?13C, indicating that diamonds grew episodically from fluids of distinct sources. Peridotitic diamonds contain up to 2962 ppm N, show 0-88% NB, and have ?13C isotopic compositions from ? 12.5‰ to ? 1.9‰ with a mode near mantle-like values. Eclogitic diamonds contain 14-1432 ppm N, NB spanning 29%-68%, and wider and lighter ?13C isotopic compositions of ? 17.8‰ to ? 3.4‰. Fibrous diamonds on average contain more N (up to 2976 ppm) and are restricted in ?13C from ? 4.1‰ to ? 9.4‰. Clinopyroxene-garnet thermobarometry suggests diamond formation at 1350-1375 °C at 5.8 to 6.3 GPa, whereas N aggregation thermometry yields diamond residence temperatures between 1000 and 1280 °C, if the assumed mantle residence time is 0.9-3.3 Ga. Integrated geothermobaromtery indicates heat fluxes of 41-44 mW/m2 during diamond formation and a lithosphere-asthenosphere boundary (LAB) at 190-210 km. The hotter-than-average cratonic mantle may be attributable to contemporaneous rifting of the southern Atlantic, multiple post-Archean reactivations of the craton, and/or proximal Cretaceous plumes.
Abstract: Comprehensive studies of zircon xenocrysts from kimberlites of the Kuoika field (northeastern Siberian craton) and several kimberlite fields of the eastern Anabar shield, along with data compilation on the age of kimberlite-hosting terranes, reveal details of the evolution of the northern Siberian craton. The age distribution and trace element characteristic of zircons from the Kuoika field kimberlites (Birekte terrane) provide evidence of significant basic and alkaline-carbonatite magmatism in northern Siberia in the Paleozoic and Mesozoic periods. The abundance of 1.8-2.1 Ga zircons in both the Birekte and adjacent Hapchan terranes (the latter hosting kimberlites of the eastern Anabar shield) supports the Paleoproterozoic assembly and stabilization of these units in the Siberian craton and the supercontinent Columbia. The abundance of Archean zircons in the Hapchan terrane reflects the input of an ancient source other than the Birekte terrane and addresses the evolution of the terrane to west (Magan and Daldyn terranes of the Anabar shield). The present study has also revealed the oldest known remnant of the Anabar shield crust, whose 3.62 Ga age is similar to that of the other ancient domain of Siberia, the Aldan shield. The first Hf isotope data for the Anabar shield coupled with the U-Pb systematics indicate three stages of crustal growth (Paleoproterozoic, Neoarchean and Paleoarchean) and two stages of the intensive crustal recycling in the Paleoproterozoic and Neoarchean. Intensive reworking of the existing crust at 2.5-2.8 Ga and 1.8-2.1 Ga is interpreted to provide evidence for the assembly of Columbia. The oldest Hf model age estimation provides a link to Early Eoarchean (3.7-3.95 Ga) and possibly to Hadean crust. Hence, some of the Archean cratonic segments of the Siberian craton could be remnants of the Earth's earliest continental crust.
Abstract: First predictions of the macrodiamond grade of newly discovered kimberlites are commonly obtained using size frequency distributions of microdiamonds. The success of this approach suggests a common origin of microdiamonds and macrodiamonds, an implication not yet conclusively established or disproved. In contrast to previous comparative studies on microdiamonds and macrodiamonds from single deposits, here all diamonds analyzed originate from the same microdiamond samples (558 diamonds, ranging from 0.212 to 3.35 mm). The diamonds were analyzed for their carbon isotope compositions and nitrogen characteristics, and, based on this dataset, statistical comparisons were conducted across the size range to assess cogenesis. As a whole, the Misery diamond suite shows high nitrogen contents (median = 850 at. ppm), a bimodal distribution in time-averaged mantle residence temperatures (two distinct subpopulations in mantle residence temperatures: ?1,125° and ?1,175°C), a high degree of platelet degradation, and ?13C compositions that are isotopically slightly heavier (median = ?4.4‰) than the global median. Statistical comparisons of the various size classes indicate the presence of subtly different subpopulations at Misery; however, the nature and magnitude of these geochemical differences are very small in the context of the global diamond database and are viewed as petrogenetically insignificant. The general geochemical similarity of diamonds from different size fractions at Misery reinforces the use of size-frequency analysis to predict diamond grade in kimberlite diamond deposits.
Abstract: During convergence of Gondwana-derived microplates and Laurussia in the Palaeozoic, subduction of oceanic and continental crusts and their sedimentary cover introduced material of regionally contrasting chemical and isotopic compositions into the mantle. This slab material metasomatised the local mantle, producing a highly heterogeneous lithospheric mantle beneath the European Variscides. The eastern termination of the European Variscides (Moldanubian and Saxo-Thuringian zones of Austria, Czech Republic, Germany and Poland) is unusual in that the mantle was modified by material from several subduction zones within a small area. Orogenic lamproites sampled this lithospheric mantle, which has a chemical signature reflecting extreme depletion (low CaO and Al2O3 contents and high Mg-number) followed by strong metasomatic enrichment, giving rise to crust-like trace element patterns, variable radiogenic 87Sr/86Sr(330) (0.7062-0.7127) and non-radiogenic Nd isotopic compositions (?Nd(330) = ? 2.8 to ? 7.8), crustal Pb isotopic compositions, and a wide range of ?7Li values (? 5.1 to + 5.1). This metasomatic signature is variably expressed in the lamproites, depending on the extent of melting and the nature of the source of the metasomatic component. Preferential melting of the metasomatically enriched (veined) lithospheric mantle with K-rich amphibole resulted in lamproitic melts with very negative, crust-like ?7Li values, which correlate positively with peralkalinity, HFSE contents and lower ?Nd. Both the higher degree of melting and progressive consumption of the metasomatic component reduce the chemical and isotopic imprints of the metasomatic end member. The very positive ?7Li values of some lamproites indicate that the source of these lamproites may have been modified by subducted oceanic lithosphere. Fresh olivine from the Brloh (Moldanubian) lamproitic dyke shows very high Fo (up to 94%) and very high Li contents (up to 25 ppm), demonstrating that the extremely depleted and later enriched lithospheric mantle may have contributed significantly to the Li budget of the lamproites. The regional distribution of lamproites with contrasting chemical and isotopic fingerprints mimics the distribution of the different Variscan subduction zones.
Abstract: Generation of ultra-alkaline melts by the interaction of lherzolite with cardonatites of various genesis was simulated at the P-T parameters typical of the base of the subcratonic lithosphere. Experiments with a duration of 150 h were performed at 5.5 and 6.3 GPa and 1350°C. The concentrations of CaO and MgO in melts are buffered by the phases of peridotite, and the concentrations of alkalis and FeO depend on the composition of the starting carbonatite. Melts are characterized by a low (<7 wt %) concentration of SiO2 and Ca# from 0.40 to 0.47. It is demonstrated that only high-Mg groups of carbonatitic inclusions in fibrous diamonds have a composition close to that of carbonatitic melts in equilibrium with lherzolite. Most likely, the formation of kimberlite-like melts relatively enriched in SiO2 requires an additional source of heat from mantle plumes and probably H2O fluid.
Abstract: Diamonds in alluvial deposits in Southeast Asia are not accompanied by indicator minerals suggesting primary kimberlite or lamproite sources. The Meratus Mountains in Southeast Borneo (Province Kalimantan Selatan, Indonesia) provide the largest known deposit of these so-called “headless” diamond deposits. Proposals for the origin of Kalimantan diamonds include the adjacent Meratus ophiolite complex, ultra-high pressure (UHP) metamorphic terranes, obducted subcontinental lithospheric mantle and undiscovered kimberlite-type sources. Here we report results from detailed sediment provenance analysis of diamond-bearing Quaternary river channel material and from representative outcrops of the oldest known formations within the Alino Group, including the diamond-bearing Campanian-Maastrichtian Manunggul Formation. Optical examination of surfaces of diamonds collected from artisanal miners in the Meratus area (247 stones) and in West Borneo (Sanggau Area, Province Kalimantan Barat;
Journal of The Geological Society of India, Vol. 87, 2, pp. 127-131.
India
Lamproite
Abstract: A singular outcrop of a lamproite dyke is located ~1.5 km south-west of Chintalapalle village at the NW margin of the Cuddapah basin, eastern Dharwar craton, southern India.. The dyke trends E-W and is emplaced within the granitic rocks belonging to the peninsular gneissic complex. The lamproite dyke has a porphyritic to weakly porphyritic texture comprising microphenocrysts of sanidine, and potassic richterite set in a groundmass rich in carbonate, and chlorite with rutile and titanate as accessory phases. This new occurrence of lamproite is located mid-way between the well-known Narayanpet kimberlite field towards the west and the Ramadugu and Vattikod lamproite fields in east. The Chintalapalle lamproite dyke, together with those from Vattikod, Ramadugu, Krishna and Cuddapah basin lamproite fields, constitute a wide spectrum of ultrapotassic magmatism emplaced in and around the Palaeo-Mesoproterozoic Cuddapah basin in southern India.
Geological Society of London, Special Publication no. 446 on line available
Global
Emplacement models
Abstract: Most kimberlite maar-diatreme volcanoes erupted during the Tertiary or earlier and therefore their tephra rings and, less often, their near-surface diatreme-filling deposits have usually been eliminated by erosion. Poorly eroded Quaternary non-kimberlite maar-diatreme volcanoes, especially those of mafic and ultramafic magma types, have the same diatreme size range (diameter and depth) as kimberlite pipes and show similar internal volcaniclastic diatreme lithofacies. In addition, these young volcanoes often have a more or less preserved tephra ring consisting of hundreds to perhaps a few thousand thin tephra beds. Volcanological analyses of the xenolith-rich primary volcaniclastic deposits both within these diatremes and in the tephra ring beds reflect phases of explosive pipe growth and are of convincingly phreatomagmatic origin. The similarities between non-kimberlite pipes and kimberlite pipes suggest to some researchers that phreatomagmatic processes were also responsible for pipe excavation processes in kimberlite maar-diatreme volcanoes. In contrast, other researchers have suggested that kimberlite maar-diatreme volcanoes were emplaced largely by magmatic processes as a consequence of exsolution and the explosive expansion of juvenile volatiles. We therefore analysed and compared some key geological features of kimberlite and ultrabasic to basic ‘basaltic’ maar-diatreme volcanoes to determine similarities and differences with respect to their emplacement behaviour.
Sverkhtverdie Materiali ( Ukraine) in RUSSIAN, No. 2, pp. 3-17.
Technology
Morphology of lonsdaleite, diamond
Abstract: External and internal morphologies of natural impact apographitic diamonds (paramorphoses) have been studied. The (0001) surface morphology of the paramorphoses reflects their phase composition and the structural relationship of its constituting phases. Growth and etch figures together with the elements of crystal symmetry of lonsdaleite and diamond are developed on these surfaces. The crystal size of lonsdaleite is up to 100 nm, and that of diamond is up to 300 nm. Two types of structural relations between graphite, lonsdaleite, and diamond in the paramorphoses are observed: the first type (black, black-gray, colorless and yellowish paramorphoses): the (0001) graphite face is parallel to the (100) lonsdaleite face and parallel to (111) diamond; the second type (milky-white paramorphoses): the (0001) graphite is parallel to the (100) lonsdaleite and parallel to the (112) diamond. The first type of the paramorphoses contains lonsdaleite, diamond, graphite or diamond, lonsdaleite, the second type of the paramorphoses contains predominantly diamond. The direct phase transition of graphite ? lonsdaleite and/or graphite ?diamond occurred in the paramorphoses of the first type. A successive phase transition graphite ? lonsdaleite ? diamond was observed in the paramorphoses of the second type. The structure of the paramorphoses of this type shows characteristic features of recrystallization.
Abstract: Textural and compositional variations of apatite from four intrusions with different characteristic features of the rift-related alkaline Gardar Province were investigated: dyke rocks that belong to the most primitive rocks of the Province (Isortoq), nepheline-syenites associated with a carbonatite (Grønnedal-Ika), SiO2-saturated and SiO2-oversaturated syenites (Puklen) and nepheline-syenites displaying the transition from miaskitic to agpaitic mineral assemblages (Motzfeldt, Fig.1). Additionally, apatites from these intrusions were compared with other apatites of the Gardar Province. These include apatites from the Older Giant Dyke Complex, the Younger Giant Dyke Complex (both from the Tugtutôq region) and a narsarsukite-bearing trachytic dyke (Igdlutalik), as well as apatites from the Kûngnât, the North Qôroq and the Ilímaussaq intrusive complexes. This results in a complete overview of rift-related magmatites of the Gardar Province, ranging from primitive to highly evolved rocks. Backscattered electron images reveal the presence of various types of apatite textures including (i) growth zonation (concentric and oscillatory) that formed during magmatic differentiation and (ii) overgrowth and secondary textures (rounded cores, patchy zonation and overgrowth rims) due to fluid/melt induced metasomatic overprint and intracrystalline diffusion (Fig.2). Additionally, apatite compositions were analyzed with wavelength-dispersive electron microprobe analyses. During the crystallization history of the different intrusions, as well as within samples (documented by zoning patterns), increasing concentrations are observed for Si, REE, Na and F, whereas Cl shows a decreasing trend. However, for F, Cl and Na these trends are only observed in dyke rocks. Compositional variation of the investigated apatites is mainly due to substitution of Ca and P by variable amounts of Si, Na and REE. This study reveals that variations in the chemical composition of apatite are useful tools to obtain geochemical information about the host magma and its magmatic evolution. Here, Si and REE were found to be reliable petrogenetic indicators, whereas Na, F and Cl are only applicable in fast cooling systems to avoid redistribution of those elements.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 14p.
Global
Economics - strategic planning
Abstract: Mining executives often have a difficult task detennining what the strategic objective of the business should be as this can be impacted by the prevailing market conditions. In addition, they have no mechanism to quantitatively 'test' the impact of this strategic decision on the business and understand the underlying dynamics. During the commodities bull run of 2003 to 2008 the strategic objective may have been to grow the long term value of the business (NPV) tluough increased tonnage, acquisition and finding new reserves, which all came with an increasing fixed cost base. Now with the financial crisis upon us and the collapse of commodity prices and demand, executives have adjusted their strategies as 'cash is king' and short-tenn cash flow, in some instances at the expense of long terms value, is the order of the day. For many mining companies, mine closures, reductions in production and cost cutting exercisers are now the focus. In many instances, management do not have an ability to rapidly test different strategic alternatives to 'test' the impact on value, unit costs, reserves and profitability at the operational level and optimise the underlying trade-off variables. Economic modelling of the complete business value chain is a means of linking the operational 'reality ' and strategic choices, so that the full impact can be assessed. This paper describes some of the challenges facing mining executives and how economic modelling can be applied to make decision making more rigorous.
Abstract: The paper reports detailed data on phlogopite from kimberlite of three facies types in the Arkhangelsk Diamondiferous Province (ADP): (i) massive magmatic kimberlite (Ermakovskaya-7 Pipe), (ii) transitional type between massive volcaniclastic and magmatic kimberlite (Grib Pipe), and (iii) volcanic kimberlite (Karpinskii-1 and Karpinskii-2 pipes). Kimberlite from the Ermakovskaya-7 Pipe contains only groundmass phlogopite. Kimberlite from the Grib Pipe contains a number of phlogopite populations: megacrysts, macrocrysts, matrix phlogopite, and this mineral in xenoliths. Phlogopite macrocrysts and matrix phlogopite define a single compositional trend reflecting the evolution of the kimberlite melt. The composition points of phlogopite from the xenoliths lie on a single crystallization trend, i.e., the mineral also crystallized from kimberlite melt, which likely actively metasomatized the host rocks from which the xenoliths were captured. Phlogopite from volcaniclastic kimberlite from the Karpinskii-1 and Karpinskii-2 pipes does not show either any clearly distinct petrographic setting or compositional differentiation. The kimberlite was dated by the Rb-Sr technique on phlogopite and additionally by the 40Ar/39Ar method. Because it is highly probable that phlogopite from all pipes crystallized from kimberlite melt, the crystallization age of the kimberlite can be defined as 376 ± 3 Ma for the Grib Pipe, 380 ± 2 Ma for the Karpinskii-1 pipe, 375 ± 2 Ma for the Karpinskii-2 Pipe, and 377 ± 0.4 Ma for the Ermakovskaya-7 Pipe. The age of the pipes coincides within the error and suggests that the melts of the pipes were emplaced almost simultaneously. Our geochronologic data on kimberlite emplacement in ADP lie within the range of 380 ± 2 to 375 ± Ma and coincide with most age values for Devonian alkaline-ultramafic complexes in the Kola Province: 379 ± 5 Ma; Arzamastsev and Wu, 2014). These data indicate that the kimberlite was formed during the early evolution of the Kola Province, when alkaline-ultramafic complexes (including those with carbonatite) were emplaced.
Abstract: We constructed a thermomechanical model to examine the changes in rheology caused by the periodic intrusion of basaltic dykes in a two-layered continental crust. Dyke intrusion can locally change the mineralogical composition of the crust in space and time as a result of temperature-induced metamorphism. In our models we paid particular attention to determine how different mineral assemblages and reaction kinetics during metamorphism impact on the thermomechanical behavior of the crust, in terms of differential stress values. We investigated several lithologies characteristic for intracontinental crust: (1) a quartz-feldspathic crust (QF), (2) a crust with a mineralogical assemblage resembling the average chemical composition occurring in literature (CC), and (3) a micaschist crust (MS). Our model shows that temperature profiles are weakly influenced by metamorphism, with negligible variations in the T-t paths. The results indicate that intrusion-induced changes in the crustal rheology are strongly dependent on mineralogical assemblage variation. The strength of a dyke aureole in the upper crust increases during dyke emplacement, which may cause migration of later dykes and influence the dyke spacing. In contrast, in the lower crust the strength of a dyke aureole decreases during dyke emplacement. Fast kinetics results in a ductile lower crust in proximity of the dykes, whereas slower kinetics leads to the formation of partial melts and subsequent switch from ductile to brittle behavior. Lithology exerts a dominant role on the quantity of melt produced, with higher volume percentages occurring in the MS case study. Produced melts may migrate and support acidic volcanic activity.
Abstract: Xenoliths of mantle peridotite have been sampled from four kimberlite intrusions, Melton Wold, Hebron, Uintjiesberg and Markt, emplaced through the Mesoproterozoic Namaqua-Natal Belt, along the southern border of the Kaapvaal Craton. Although many of the xenoliths are heavily altered, constituent clinopyroxene, garnet and phlogopite are fresh and have been analysed by electron microprobe for major elements and by laser ablation ICP-MS for trace elements. Primitive mantle-normalised REE abundances in clinopyroxene are all strongly LREE enriched and show a range of patterns including uniformly MREE-HREE sloped (referred to here as ‘normal’), sinusoidal and humped sinusoidal patterns. HREE abundances are extremely low (Yb = 0.3-0.06 × PM). REEN patterns in coexisting garnets show a similar range of patterns. When normalised to primitive mantle values, trace element patterns in some clinopyroxenes show strong relative depletion in Rb-Ba, Ta-Nb and Ti, with some samples also being relatively depleted in Zr-Hf. These trace element characteristics are indistinguishable from those found in clinopyroxene and garnet from peridotites from the adjacent cratonic mantle. Numerical modelling of reactive porous flow of an enriched metasomatic melt through a geochemically depleted peridotite matrix can account for the full range in observed REEN patterns. The relative depletion in Rb-Ba, Ta-Nb and Ti can be accounted for by an early crystallisation of phlogopite from the percolating melt. The relative depletion in Zr-Hf in some clinopyroxenes requires either zircon to crystallise in the proximal metasomatic assemblage, or metasomatism by a carbonatitic melt. Modelling results, together with the absence of clinopyroxene with depleted or even partially enriched REEN patterns, suggest that all clinopyroxene has been modally introduced through metasomatism into an initially highly depleted harzburgitic protolith. The range in Sr and Pb isotopic composition of the clinopyroxenes indicates regional metasomatism by melts of various compositions. The strong HREEN depletion is interpreted to reflect the effect of initial melt depletion in the early Proterozoic, with melting extending into the spinel stability field requiring an oceanic realm, and again later in the Mesoproterozoic (Namaqua Orogeny). The superimposed incompatible element enrichment indicates subsequent multiple enrichment events by rising alkaline melts similar in composition to kimberlite or ultramafic alkaline lamprophyre, possibly related to Mesozoic plume upwelling beneath the region, that reintroduced clinopyroxene into the depleted Proterozoic harzburgite protolith.
Earth and Planetary Science Letters, Vol. 454, pp. 103-112.
Mantle, Africa, Morocco
Melting
Abstract: Pyroxenites are often documented among exhumed mantle rocks, and can be found in most tectonic environments, from supra-subduction to sub-continental and sub-oceanic mantle. In particular, websterites, i.e. orthopyroxene-clinopyroxene bearing pyroxenites, are found in parallel layers in most orogenic and ophiolitic peridotites. Their formation is often ascribed to melt infiltration and melt-rock reaction processes accompanied by variable amount of deformation. One outstanding question is whether the ubiquitous occurrence of layered websterites in exhumed rocks is generally linked to the exhumation process or truly represents large-scale melt infiltration processes at depth prior to exhumation. These two hypotheses can be distinguished by comparing the exhumation and formation ages of the websterites. However, determination of the layered websterite formation age is challenging. Here we present a novel approach to constrain the formation age of websterite layers using samples from the Lherz massif (France), where layered websterites and lherzolites have formed through melt-rock reaction. By combining high-resolution REE variations, isotope model ages, and diffusive re-equilibration timescales using REE closure temperatures across the websterite layers, we constrain a minimum age and a maximum age for the formation of layered websterites. We show that layered websterites in Lherz formed 1,500-1,800 Ma ago, and are thus clearly disconnected from the process of exhumation at 104 Ma. Multiple generations of layered websterites commonly found in ultramafic massifs, along with the evidence for ancient melt-rock reaction in Lherz, indicate that melt-rock reactions can happen episodically or continuously in the mantle and that layered websterites found in exhumed mantle rocks record ubiquitous melt infiltration processes in the mantle.
Abstract: Earth owes its oxygenated atmosphere to its unique claim on life, but how the atmosphere evolved from an initially oxygen-free state remains unresolved. The rise of atmospheric oxygen occurred in two stages: approximately 2.5 to 2.0 billion years ago during the Great Oxidation Event and roughly 2 billion years later during the Neoproterozoic Oxygenation Event. We propose that the formation of continents about 2.7 to 2.5 billion years ago, perhaps due to the initiation of plate tectonics, may have led to oxygenation by the following mechanisms. In the first stage, the change in composition of Earth's crust from iron- and magnesium-rich mafic rocks to feldspar- and quartz-rich felsic rocks could have caused a decrease in the oxidative efficiency of the Earth's surface, allowing atmospheric O2 to rise. Over the next billion years, as carbon steadily accumulated on the continents, metamorphic and magmatic reactions within this growing continental carbon reservoir facilitated a gradual increase in the total long-term input of CO2 to the ocean -atmosphere system. Given that O2 is produced during organic carbon burial, the increased CO2 input may have triggered a second rise in O2. A two-step rise in atmospheric O2 may therefore be a natural consequence of plate tectonics, continent formation and the growth of a crustal carbon reservoir.
Abstract: Carbon from Earth’s interior is thought to be released to the atmosphere mostly via degassing of CO2 from active volcanoes1, 2, 3, 4. CO2 can also escape along faults away from active volcanic centres, but such tectonic degassing is poorly constrained1. Here we use measurements of diffuse soil CO2, combined with carbon isotopic analyses to quantify the flux of CO2 through fault systems away from active volcanoes in the East African Rift system. We find that about 4?Mt?yr?1 of mantle-derived CO2 is released in the Magadi-Natron Basin, at the border between Kenya and Tanzania. Seismicity at depths of 15-30?km implies that extensional faults in this region may penetrate the lower crust. We therefore suggest that CO2 is transferred from upper-mantle or lower-crustal magma bodies along these deep faults. Extrapolation of our measurements to the entire Eastern rift of the rift system implies a CO2 flux on the order of tens of megatonnes per year, comparable to emissions from the entire mid-ocean ridge system2, 3 of 53-97?Mt?yr?1. We conclude that widespread continental rifting and super-continent breakup could produce massive, long-term CO2 emissions and contribute to prolonged greenhouse conditions like those of the Cretaceous.
Geophysical Research Letters, Vol. 43, 5, pp. 1928-1933.
Canada, Ontario
Geophysics - seismics
Abstract: The Superior Province of North America has not experienced major internal deformation for nearly 2.8?Gyr, preserving the Archean crust in its likely original state. We present seismological evidence for a sharp (less than 1?km) crust-mantle boundary beneath three distinct Archean terranes and for a more vertically extensive boundary at sites likely affected by the 1.2-0.9?Ga Grenville orogeny. At all sites crustal thickness is smaller than expected for the primary crust produced by melting under higher mantle potential temperature conditions of Archean time. Reduced thickness and an abrupt contrast in seismic properties at the base of the undisturbed Archean crust are consistent with density sorting and loss of the residues through gravitational instability facilitated by higher temperatures in the upper mantle at the time of formation. Similar sharpness of crust-mantle boundary in disparate Archean terranes suggests that it is a universal feature of the Archean crustal evolution.
Contributions to Mineralogy and Petrology, Vol. 171, 7, 14p.
China
Geothermometry
Abstract: The large equilibrium Mg isotope fractionation between clinopyroxene and garnet observed in eclogites makes it a potential high-precision geothermometer, but calibration of this thermometer by natural samples is still limited. Here, we report Mg isotopic compositions of eclogite whole rocks as well as Mg and O isotopic compositions of clinopyroxene and garnet separates from 16 eclogites that formed at different temperatures from the Dabie orogen, China. The whole-rock ?26Mg values vary from ?1.20 to +0.10 ‰. Among them, 11 samples display limited ?26Mg variations from ?0.36 to ?0.17 ‰, similar to those of their protoliths. The mineral separates exhibit very different ?26Mg values, from ?0.39 to +0.39 ‰ for clinopyroxenes and from ?1.94 to ?0.81 ‰ for garnets. The clinopyroxene -garnet Mg isotope fractionation (?26Mgclinopyroxene -garnet = ?26Mgclinopyroxene -?26Mggarnet) varies from 1.05 to 2.15 ‰. The clinopyroxene -garnet O isotope fractionation (?18Oclinopyroxene -garnet = ?18Oclinopyroxene -?18Ogarnet) varies from ?1.01 to +0.98 ‰. Equilibrium Mg isotope fractionation between clinopyroxene and garnet in the investigated samples is selected based on both the ?26Mgclinopyroxene versus ?26Mggarnet plot and the state of O isotope equilibrium between clinopyroxene and garnet. The equilibrium ?26Mgclinopyroxene -garnet and corresponding temperature data obtained in this study, together with those available so far in literatures for natural eclogites, are used to calibrate the clinopyroxene -garnet Mg isotope thermometer. This yields a function of ?26Mgclinopyroxene -garnet = (0.99 ± 0.06) × 106/T 2, where T is temperature in Kelvin. The refined function not only provides the best empirically calibrated clinopyroxene -garnet Mg isotope thermometer for precise constraints of temperatures of clinopyroxene- and garnet-bearing rocks, but also has potential applications in high-temperature Mg isotope geochemistry.
Abstract: The abundances of volatile elements in the Earth’s mantle have been attributed to the delivery of volatile-rich material after the main phase of accretion1, 2, 3. However, no known meteorites could deliver the volatile elements, such as carbon, nitrogen, hydrogen and sulfur, at the relative abundances observed for the silicate Earth4. Alternatively, Earth could have acquired its volatile inventory during accretion and differentiation, but the fate of volatile elements during core formation is known only for a limited set of conditions4, 5, 6, 7, 8. Here we present constraints from laboratory experiments on the partitioning of carbon and sulfur between metallic cores and silicate mantles under conditions relevant for rocky planetary bodies. We find that carbon remains more siderophile than sulfur over a range of oxygen fugacities; however, our experiments suggest that in reduced or sulfur-rich bodies, carbon is expelled from the segregating core. Combined with previous constraints9, we propose that the ratio of carbon to sulfur in the silicate Earth could have been established by differentiation of a planetary embryo that was then accreted to the proto-Earth. We suggest that the accretion of a Mercury-like (reduced) or a sulfur-rich (oxidized) differentiated body—in which carbon has been preferentially partitioned into the mantle—may explain the Earth’s carbon and sulfur budgets.
Geological Society of America Annual Meeting, Vol. 47, 7, p. 163. abstract
Europe, Turkey
Moissanite
Abstract: The Aladag ophiolite in the eastern Tauride belt, southern Turkey, is a well-preserved remnant of oceanic lithosphere. It consists of, in ascending order, harzburgitic to dunitic tectonites, ultramafic and mafic cumulates, isotropic gabbros, sheeted dikes and basaltic pillow lavas. Podiform chromitites are common in the mantle peridotites. Thus far, more than 200 grains of microdiamond and more than 100 grains of moissanite (SiC) have been separated from one sample of podiform chromitite. The microdiamonds occur mostly as subhedral to euhedral, colorless to pale yellow grains, about 50-300 ?m in size. Moissanite grains are generally subhedral, light blue to deep blue in color and variable in size. These grains of diamond and moissanite are very similar to in-situ grains in podiform chromitites of Tibet and the Polar Urals of Russia (Yang et al., 2014; 2015), indicating that they are natural minerals, not the result of natural or anthropogenic contamination. As reported elsewhere, the diamonds and moissanite are accompanied by a range of other minerals, including rutile, zircon, quartz and sulfides. The discovery of diamond, moissanite and other unusual minerals in the podiform chromitites of the Aladag massif provide additional evidence for the widespread occurrence of these minerals in ophiolites, indicating that they are related to global mantle processes.
Abstract: Canada is host to at least six separate cratons that comprise a significant proportion of its crustal extent. Of these cratons, we possess knowledge of the cratonic lithospheric roots beneath only the Slave craton and, to a lesser extent, the Superior craton, despite the discovery of many new diamond-bearing kimberlites in Canada's North. Here we present the first age, composition and geothermal information for kimberlite-borne peridotite xenoliths from two localities within the central Rae craton: Pelly Bay and Repulse Bay. Our aim is to investigate the nature and evolution of the deep lithosphere in these regions and to examine how events recorded in the mantle may or may not correlate with the complex history of crustal evolution across the craton. Peridotite xenoliths are commonly altered by secondary processes including serpentinization, silicification and carbonation, which have variably affected the major element compositions. These secondary processes, as well as mantle metasomatism recorded in pristine silicate minerals, however, did not significantly modify the relative compositions of platinum-group elements (PGE) and Os isotope ratios in the majority of our samples from Pelly Bay and Repulse Bay, as indicated by the generally high absolute PGE concentrations and mantle-like melt-depleted PGE patterns. The observed PGE signatures are consistent with the low bulk Al2O3 contents (mostly lower than 2.5%) of the peridotites, as well as the compositions of the silicate and oxide minerals. Based on PGE patterns and Os model ages, the peridotites from both localities can be categorized into three age groups: Archean (3.0-2.6 Ga overall; 2.8-2.6 Ga for Pelly Bay and 3.0-2.7 Ga for Repulse Bay), Paleoproterozoic (2.1-1.7 Ga), and "Recent" (<1 Ga, with model ages similar to the ca. 546 Ma kimberlite eruption age). The Archean group provides the first direct evidence of depleted Archean lithospheric mantle forming coevally with the overlying Archean crustal basement, indicating cratonization of the Rae during the Archean. The subtle difference in Os model ages between Pelly Bay and Repulse Bay coincides with the age difference between crustal basement rocks beneath these two areas, supporting the suggestion that the Rae craton was assembled by collision of separate two Archean blocks at 2.7-2.6 Ga. The Paleoproterozoic peridotites are interpreted to represent newly formed lithospheric mantle, most likely associated with regional-scale underplating during the 1.77-1.70 Ga Kivalliq-Nueltin event via removal of the lower portion of Archean lithospheric mantle followed by replacement with juvenile Paleoproterozoic lithospheric mantle. The existence of multiple age clusters in the lithosphere at each locality is consistent with the observation of present-day seismic lithospheric discontinuities (0540 and 0545) that indicate two or more layers of fossil lithospheric mantle fabric beneath this region. Our data define a shallow mantle lithosphere layer dominated by Archean depletion ages underlain by a layer of mixed Archean and Paleoproterozoic ages. This lithospheric mantle structure is probably a response to complex tectonic displacement of portions of the lithospheric mantle during Paleoproterozoic orogeny/underplating. The best equilibrated Archean and Paleoproterozoic peridotites at both Pelly Bay and Repulse Bay define a typical cratonic geotherm at the time of kimberlite eruption, with a ?200 km thick lithospheric root extending well into the diamond stability field, in keeping with the diamondiferous nature of the kimberlites. Such thick lithosphere remains in place to the present day as suggested by seismic and magnetotelluric studies (0540, 0545 and 0550). The metasomatically disturbed peridotites in the Rae lithospheric mantle, yielding model ages indistinguishable from kimberlite eruption, may represent parts of the Rae craton mantle root that show anomalous magnetotelluric signatures.
Abstract: Canada is host to at least six separate cratons that comprise a significant proportion of its crustal extent. Of these cratons, we possess knowledge of the cratonic lithospheric roots beneath only the Slave craton and, to a lesser extent, the Superior craton, despite the discovery of many new diamond-bearing kimberlites in Canada's North. Here we present the first age, composition and geothermal information for kimberlite-borne peridotite xenoliths from two localities within the central Rae craton: Pelly Bay and Repulse Bay. Our aim is to investigate the nature and evolution of the deep lithosphere in these regions and to examine how events recorded in the mantle may or may not correlate with the complex history of crustal evolution across the craton. Peridotite xenoliths are commonly altered by secondary processes including serpentinization, silicification and carbonation, which have variably affected the major element compositions. These secondary processes, as well as mantle metasomatism recorded in pristine silicate minerals, however, did not significantly modify the relative compositions of platinum-group elements (PGE) and Os isotope ratios in the majority of our samples from Pelly Bay and Repulse Bay, as indicated by the generally high absolute PGE concentrations and mantle-like melt-depleted PGE patterns. The observed PGE signatures are consistent with the low bulk Al2O3 contents (mostly lower than 2.5%) of the peridotites, as well as the compositions of the silicate and oxide minerals. Based on PGE patterns and Os model ages, the peridotites from both localities can be categorized into three age groups: Archean (3.0-2.6 Ga overall; 2.8-2.6 Ga for Pelly Bay and 3.0-2.7 Ga for Repulse Bay), Paleoproterozoic (2.1-1.7 Ga), and “Recent” (<1 Ga, with model ages similar to the ca. 546 Ma kimberlite eruption age). The Archean group provides the first direct evidence of depleted Archean lithospheric mantle forming coevally with the overlying Archean crustal basement, indicating cratonization of the Rae during the Archean. The subtle difference in Os model ages between Pelly Bay and Repulse Bay coincides with the age difference between crustal basement rocks beneath these two areas, supporting the suggestion that the Rae craton was assembled by collision of separate two Archean blocks at 2.7-2.6 Ga. The Paleoproterozoic peridotites are interpreted to represent newly formed lithospheric mantle, most likely associated with regional-scale underplating during the 1.77-1.70 Ga Kivalliq-Nueltin event via removal of the lower portion of Archean lithospheric mantle followed by replacement with juvenile Paleoproterozoic lithospheric mantle. The existence of multiple age clusters in the lithosphere at each locality is consistent with the observation of present-day seismic lithospheric discontinuities (0540 and 0545) that indicate two or more layers of fossil lithospheric mantle fabric beneath this region. Our data define a shallow mantle lithosphere layer dominated by Archean depletion ages underlain by a layer of mixed Archean and Paleoproterozoic ages. This lithospheric mantle structure is probably a response to complex tectonic displacement of portions of the lithospheric mantle during Paleoproterozoic orogeny/underplating. The best equilibrated Archean and Paleoproterozoic peridotites at both Pelly Bay and Repulse Bay define a typical cratonic geotherm at the time of kimberlite eruption, with a ?200 km thick lithospheric root extending well into the diamond stability field, in keeping with the diamondiferous nature of the kimberlites. Such thick lithosphere remains in place to the present day as suggested by seismic and magnetotelluric studies (0540, 0545 and 0550). The metasomatically disturbed peridotites in the Rae lithospheric mantle, yielding model ages indistinguishable from kimberlite eruption, may represent parts of the Rae craton mantle root that show anomalous magnetotelluric signatures.
Geochemistry, Geophysics, Geosystems: G3, Vol. 17, 1, pp. 2-15.
United States
Geophysics - seismics
Abstract: Seismic anisotropy in the upper mantle beneath continental interiors is generally complicated, with contributions from both the lithosphere and the asthenosphere. Previous studies of SKS splitting beneath the eastern United States have yielded evidence for complex and laterally variable anisotropy, but until the recent arrival of the USArray Transportable Array (TA) the station coverage has been sparse. Here we present SKS splitting measurements at TA stations in eastern North America and compare the measured fast directions with indicators such as absolute plate motion, surface geology, and magnetic lineations. We find few correlations between fast directions and absolute plate motion, except in the northeastern U.S. and southern Canada, where some stations exhibit variations in apparent splitting with backazimuth that would suggest multiple layers of anisotropy. A region of the southeastern U.S. is dominated by null SKS arrivals over a range of backazimuths, consistent with previous work. We document a pattern of fast directions parallel to the Appalachian mountain chain, suggesting a contribution from lithospheric deformation associated with Appalachian orogenesis. Overall, our measurements suggest that upper mantle anisotropy beneath the eastern United States is complex, with likely contributions from both asthenospheric and lithospheric anisotropy in many regions.
Geological Society of London, Special Publication no. 446 on line available
Global
Diatreme model
Abstract: We report here a growth model for phreatomagmatic maar-diatreme volcanoes with respect to the number of eruptions documented in the tephra beds of maar tephra rings and the upper bedded diatreme facies. We show that the number of tephra beds in large diatremes is larger than that in maar tephra rings. Base surges that lack sufficient momentum to scale high maar crater walls deposit their tephra only inside the crater. Thus the total number of eruptions at large maar-diatreme volcanoes will be larger than the number recorded in maar tephra rings. As many maar-diatreme volcanoes erupt dominantly accidental clasts, an incremental mathematical model was applied to study the growth of diatremes. The model is based only on the ejection of distinct amounts of accidental clasts per unit eruption and the chosen number of eruptions is assumed to be identical. The incremental growth of cone-shaped diatremes follows cube-root functions with respect to diameter and depth and slows down with ongoing eruptions. In nature, small and large maar-diatreme volcanoes are formed and filled syn-eruptively, mostly by tephra, depending on the duration and quantity of magma involved in phreatomagmatic eruptions. In our opinion, this mathematical model is the only current method able to model the growth of diatremes.
Journal of Volcanology and Geothermal Research, in press available 15p.
Africa, Algeria
Lamproite
Abstract: The late Miocene (11-9 Ma) volcanic rocks of Kef Hahouner, ~ 40 km NE of Constantine (NE Algeria), are commonly classified as lamproites in literature. However, these rocks are characterized by an anhydrous paragenesis with plagioclase and Mg-rich olivine phenocrysts, set in a groundmass made up of feldspars, pyroxenes and opaque minerals. Thus, we classify the Kef Hahouner rocks as ultrapotassic shoshonites and latites, having K2O > 3 wt.%, K2O/Na2O > 2.5, MgO > 3-4 wt.%, SiO2 < 55-57 wt.% and SiO2/K2O < 15. All the investigated samples show primitive mantle-normalized multi-element patterns typical of orogenic (arc-type) magmas, i.e. enriched in LILE (e.g. Cs, Rb and Ba) and LREE (e.g. La/Yb = 37-59) with respect to the HFSE, peaks at Pb and troughs at Nb and Ta. Initial isotopic ratios are in the range of 87Sr/86Sr = 0.70874-0.70961, 143Nd/144Nd = 0.51222-0.51223, 206Pb/204Pb = 18.54-18.60, 207Pb/204Pb = 15.62-15.70 and 208Pb/204Pb = 38.88-39.16. The Kef Hahouner volcanic rocks show multi-element patterns similar to the other circum-Mediterranean lamproites and extreme Sr, Nd and Pb isotopic compositions. Nevertheless, the abundant plagioclase, the presence of Al-rich augite coupled with high Al2O3 whole rock compositions (9.6-21.4 wt.%), and the absence of phlogopite are all at inconsistent with the definition of lamproite. We reviewed the rocks classified as lamproites worldwide, and found that many of these rocks, as for the Kef Hahouner samples, should be actually defined as "normal" potassic to ultrapotassic volcanic rocks. Even the grouping of lamproites into "orogenic" and "anorogenic" types appears questionable.
Abstract: The North China Craton is a classic case for the destruction of an ancient craton, in that it records the loss of more than 100 km of ancient refractory lithospheric mantle during the late Mesozoic and early Cenozoic. However, the mechanisms for this lithospheric thinning remain controversial in large part due to the lack of any systematic investigations of the Mesozoic asthenospheric mantle via its derived mafic rocks, which are key to understand the thinning processes. In this paper, we present detailed zircon U-Pb geochronology, elemental geochemistry, and Sr-Nd-Hf isotopic data for lamprophyres and diabase-porphyries of the Jiaodong Peninsula, in the eastern North China Craton in order to place constraints on models for lithospheric thinning. Our results show that the lamprophyres and diabase-porphyries are derived from the convective asthenospheric mantle via different degrees of partial melting, and that this mantle source was previously modified by carbonatitic liquids. Zircon LA-ICP-MS U-Pb dating suggests an emplacement age for these rocks of 123-121 Ma, the earliest evidence for asthenospherically-derived melts in the Jiaodong Peninsula so far. This emplacement age indicates that the thickness of the lithosphere in the Jiaodong Peninsula was relatively thin at that time. Co-occurrence of the asthenospheric and lithospheric mantle-derived mafic rocks as well as high-Mg adakites record a rapid transition from lithospheric to asthenospheric mantle sources, indicating that the lithosphere beneath the Jiaodong Peninsula was rapidly detached just prior to ca. 120 Ma. Lithospheric thinning of the North China Craton may have been initiated from the Jiaodong Peninsula and Bohai Sea and then propagated towards the interior of the craton.
Journal of Geochemical Exploration, Vol. 165, pp. 159-173.
Canada, British Columbia
Geochemistry - carbonatites
Abstract: This orientation survey indicates that Quantitative Evaluation of Materials by Scanning electron microscopy (QEMSCAN®) is a viable alternative to traditional indicator mineral exploration approaches which involve complex processing followed by visual indicator mineral hand-picking with a binocular microscope. Representative polished smear sections of the 125-250 ?m fraction (dry sieved and otherwise unprocessed) and corresponding Mozley C800 table concentrates from the drainages of three carbonatites (Aley, Lonnie, and Wicheeda) in the British Columbia Alkaline Province of the Canadian Cordillera were studied. Polished smear sections (26 × 46 mm slide size) contained an average of 20,000 exposed particles. A single section can be analyzed in detail using the Particle Mineral Analysis routine in approximately 3.5-4.5 h. If only mineral identification and mineral concentrations are required, the Bulk Mineral Analysis routine reduces the analytical time to 30 min. The most useful carbonatite indicator minerals are niobates (pyrochlore and columbite), REE-fluorocarbonates, monazite, and apatite. Niobate minerals were identified in the 125-250 ?m fraction of stream sediment samples more than 11 km downstream from the Aley carbonatite (their source) without the need for pre-concentration. With minimal processing by Mozley C800, carbonatite indicator minerals were detected downstream of the Lonnie and Wicheeda carbonatites. The main advantages of QEMSCAN® over the traditional indicator mineral exploration techniques are its ability to: 1) analyze very small minerals, 2) quickly determine quantitative sediment composition and mineralogy by both weight percent and mineral count, 3) establish mineral size distribution within the analyzed size fraction, and 4) determine the proportions of monomineralic (liberated) grains to compound grains and statistically assess mineral associations in compound grains. One of the key advantages is that this method permits the use of indicator minerals based on their chemical properties. This is impossible to accomplish using visual identification.
Abstract: The aim of this paper is to add confidence to existing methods using decay shape analysis to detect superparamagnetic responses in airborne electromagnetic data. While expensive to acquire, vertical spatial gradient measurements of the electromagnetic signals can discriminate near-surface superparamagnetic sources. This research investigated the use of horizontal spatial gradients and amplitude information as further indicators of superparamagnetic. High horizontal gradients were shown both theoretically and in field data to help discriminate superparamagnetic from deep mineral targets. Further, superparamagnetic responses have characteristically small amplitudes inconsistent with realistic mineral exploration targets at shallow depths.
Abstract: This article contributes to evolving debates on Sierra Leone’s post-war “crisis of youth” by providing an extended analysis of the role that young boys and girls assume in negotiating household poverty and enhancing their livelihood opportunities in small-scale mining communities. Child miners – or “half shovels” as they are locally known – are both directly and indirectly involved in small-scale gold extraction in Kono District, Sierra Leone’s main diamond-producing area. But the implications of their involvement are often far more nuanced and complex than international children’s rights advocates understand them to be. Drawing upon recent fieldwork carried out in and around the Kono mining village of Bandafayie, the article argues that children’s participation in the rural economy not only generates much-needed household income, but in many cases is the only way in which they can earn the monies needed to attend school. A blind and uncritical acceptance of international codes and agreements on child labor could have an adverse impact on children and, by extension, poor communities in rural Sierra Leone. Western notions of “progress” and development, as encapsulated in the post-conflict reconstruction programing of international NGOs and donor organizations, often do not match up with the complex realities or competing visions of local people.
Journal of South African Institute of Mining and Metallurgy, Vol. 116, Apr. pp. 343-348.
Africa, South Africa
Deposit - Cullinan
Abstract: Near-infrared (NIR) spectroscopy sorting technology is incorporated in an automated optical mineral sorter that can discriminate between materials using the differences in characteristics when exposed to near-infrared radiation. During September 2014 to April 2015, a pilot plant that utilized NIR technology to discriminate between kimberlite and waste materials was commissioned to determine the viability of including this technology in the diamond winning process flow sheet at Cullinan Diamond Mine. The plant was used to minimize the waste content in the size fraction -70+35 mm that reports to the crushing section and then to the dense media separation process. This paper describes the initial test work, conducted at Mintek, that led to the decision to conduct a pilot-scale study. The mineralogical characterization of the feed and product streams to establish the sorting criteria and the operational data obtained during the pilot plant campaign are described. The results indicated a good possibility of discriminating between the kimberlite and waste material using NIR technology. However, the consistency of discrimination was not good enough to avoid the risk of potential diamond loss. Furthermore, a lower than expected availability of the machine reduced the throughput capabilities.
Maia, M., Sichel, S., Briais, A., Brunelli, D., Ligi, M., Ferreira, N., Campos, T., Mougel, B., Brehme, I., Hemond, C., Motoki, A., Moura, D., Scalabrin, C., Pessanha, I., Alves, E., Ayres, A., Oliveira, P.
Abstract: Mantle exhumation at slow-spreading ridges is favoured by extensional tectonics through low-angle detachment faults1, 2, 3, 4, and, along transforms, by transtension due to changes in ridge/transform geometry5, 6. Less common, exhumation by compressive stresses has been proposed for the large-offset transforms of the equatorial Atlantic7, 8. Here we show, using high-resolution bathymetry, seismic and gravity data, that the northern transform fault of the St Paul system has been controlled by compressive deformation since ~10?million years ago. The long-lived transpression resulted from ridge overlap due to the propagation of the northern Mid-Atlantic Ridge segment into the transform domain, which induced the migration and segmentation of the transform fault creating restraining stepovers. An anticlockwise change in plate motion at ~11?million years ago5 initially favoured extension in the left-stepping transform, triggering the formation of a transverse ridge, later uplifted through transpression, forming the St Peter and St Paul islets. Enhanced melt supply at the ridge axis due to the nearby Sierra Leone thermo chemical anomaly9 is responsible for the robust response of the northern Mid-Atlantic Ridge segment to the kinematic change. The long-lived process at the origin of the compressive stresses is directly linked to the nature of the underlying mantle and not to a change in the far-field stress regime.
Abstract: Mineralogical studies and U-Pb dating have been carried out on rutile included in peridotitic and eclogitic garnets from the Internatsionalnaya pipe, Mirny field, Siberian craton. We also describe a unique peridotitic paragenesis (rutile + forsterite + enstatite + Cr-diopside + Cr-pyrope) preserved in diamond from the Mir pipe, Mirny field. Compositions of rutile from the heavy mineral concentrates of the Internatsionalnaya pipe and rutile inclusions in crustal almandine-rich garnets from the Mayskaya pipe (Nakyn field), as well as from a range of different lithologies, are presented for comparison. Rutile from cratonic mantle peridotites shows characteristic enrichment in Cr, in contrast to lower-Cr rutile from crustal rocks and off-craton mantle. Rutile with Cr2O3 > 1.7 wt% is commonly derived from cratonic mantle, while rutiles with lower Cr2O3 may be both of cratonic and off-cratonic origin. New analytical developments and availability of standards have made rutile accessible to in situ U-Pb dating by laser ablation ICP-MS. A U-Pb age of 369 ± 10 Ma for 9 rutile grains in 6 garnets from the Internatsionalnaya pipe is consistent with the accepted eruption age of the pipe (360 Ma). The equilibrium temperatures of pyropes with rutile inclusions calculated using Ni-in-Gar thermometer range between ~ 725 and 1030 °C, corresponding to a depth range of ca ~ 100-165 km. At the time of entrainment in the kimberlite, garnets with Cr-rich rutile inclusions resided at temperatures well above the closure temperature for Pb in rutile, and thus U-Pb ages on mantle-derived rutile most likely record the emplacement age of the kimberlites. The synthesis of distinctive rutile compositions and U-Pb dating opens new perspectives for using rutile in diamond exploration in cratonic areas.
Abstract: The theory of plate tectonics describes how the surface of Earth is split into an organized jigsaw of seven large plates1 of similar sizes and a population of smaller plates whose areas follow a fractal distribution2, 3. The reconstruction of global tectonics during the past 200 million years4 suggests that this layout is probably a long-term feature of Earth, but the forces governing it are unknown. Previous studies3, 5, 6, primarily based on the statistical properties of plate distributions, were unable to resolve how the size of the plates is determined by the properties of the lithosphere and the underlying mantle convection. Here we demonstrate that the plate layout of Earth is produced by a dynamic feedback between mantle convection and the strength of the lithosphere. Using three-dimensional spherical models of mantle convection that self-consistently produce the plate size -frequency distribution observed for Earth, we show that subduction geometry drives the tectonic fragmentation that generates plates. The spacing between the slabs controls the layout of large plates, and the stresses caused by the bending of trenches break plates into smaller fragments. Our results explain why the fast evolution in small back-arc plates7, 8 reflects the marked changes in plate motions during times of major reorganizations. Our study opens the way to using convection simulations with plate-like behaviour to unravel how global tectonics and mantle convection are dynamically connected.
Canadian Institute of Mining and Metallurgy, Vol. 6, 3, 14p.
Africa, Botswana
Deposit - Orapa
Abstract: The degree of uncertainty associated with a natural diamond resource is important to quantify from the time of discovery through the production lifetime. Data collection occurs during the discovery, exploration, delineation, and production or recovery phases. Quantifying the relationship between data and uncertainty is an important component of project valuation. The value of data is measured as their potential to reduce uncertainty if they are collected. A method is developed using Monte Carlo simulation for predicting resource uncertainty and valuing data during critical phases of development, particularly discovery and exploration. The technique is applied to diamond pipe deposits.
Abstract: This paper provides a review of the Geological exploration of the Angola Coast (from Sumbe to Namibe) from pioneer's first geological descriptions and mining inventory to the most recent publications supported by the oil industry. We focus our attention on the following periods: 1875-1890 (Paul Choffat's work, mainly), 1910-1949 (first maps at country scale), 1949-1974 (detailed mapping of the Kwanza-Namibe coastal series), 1975-2000, with the editing of the last version of the Angola geological map at 1:1 million scale and the progressive completion of previous works. Since 2000, there is a renewal in geological fieldwork publications on the area mainly due to the work of university teams. This review paper thus stands at the frontier between geology, natural resources and the history of geology. It shows how geological knowledge has progressed in time, fueled by economic and scientific reasons.
Abstract: At the beginning of continent-continent collision the descending plate dehydrates. The influence of this dehydration on the adjacent lithospheric mantle was studied. For this reason, pressure (P), temperature (T) and T-H2O pseudosections were calculated for an average mantle composition using the computer software PERPLE_X. These pseudosections were contoured by isopleths, for instance, for volumes of amphibole, chlorite, and serpentine. In addition, P-T pseudosections were considered for four psammopelitic rocks, common in the upper portion of the continental crust, in order to quantify the release of H2O in these rocks during prograde metamorphism. At pressures around 1 GPa, a maximum of slightly more than 10 vol.% chlorite, almost 20 vol.% amphibole, and some talc but no serpentine forms when only 1.8 wt.% H2O is added to the dry ultrabasite at temperatures of 600 °C. For example, hydrous phases amount to about 35 vol.% serpentine and 10 vol.% each of chlorite and amphibole at 1 GPa, 550 °C, and 5 wt.% H2O. The modelled psammopelitic rocks can release 0.8-2.5 wt.% H2O between 450 and 650 °C at 0.8-1.4 GPa. On the basis of the above calculations, different collisional scenarios are discussed highlighting the role of hydrated lithospheric mantle. In this context a minimum hydration potential of the front region of the descending continental plate is considered, which amounts to 4.6 × 1016 kg releasable H2O for a 1000 km wide collisional zone, due to a thick sedimentary pile at the continental margin. Further suggestions are that (1) the lower crustal plate in a continent-continent collisional setting penetrates the lithospheric mantle, which is hydrated during the advancement of this plate, (2) the maximum depths of the subduction of upper continental crust is below 70 km and (3) hydrated mantle above the descending crustal plate is thrust onto this continental crust.
Abstract: Mineralogical studies and U-Pb dating have been carried out on rutile included in peridotitic and eclogitic garnets from the Internatsionalnaya pipe, Mirny field, Siberian craton. We also describe a unique peridotitic paragenesis (rutile + forsterite + enstatite + Cr-diopside + Cr-pyrope) preserved in diamond from the Mir pipe, Mirny field. Compositions of rutile from the heavy mineral concentrates of the Internatsionalnaya pipe and rutile inclusions in crustal almandine-rich garnets from the Mayskaya pipe (Nakyn field), as well as from a range of different lithologies, are presented for comparison. Rutile from cratonic mantle peridotites shows characteristic enrichment in Cr, in contrast to lower-Cr rutile from crustal rocks and off-craton mantle. Rutile with Cr2O3 > 1.7 wt% is commonly derived from cratonic mantle, while rutiles with lower Cr2O3 may be both of cratonic and off-cratonic origin. New analytical developments and availability of standards have made rutile accessible to in situ U-Pb dating by laser ablation ICP-MS. A U-Pb age of 369 ± 10 Ma for 9 rutile grains in 7 garnets from the Internatsionalnaya pipe is consistent with the accepted eruption age of the pipe (360 Ma). The equilibrium temperatures of pyropes with rutile inclusions calculated using Ni-in-Gar thermometer range between ~ 725 and 1030 °C, corresponding to a depth range of ca ~ 100-165 km. At the time of entrainment in the kimberlite, garnets with Cr-rich rutile inclusions resided at temperatures well above the closure temperature for Pb in rutile, and thus U-Pb ages on mantle-derived rutile most likely record the emplacement age of the kimberlites. The synthesis of distinctive rutile compositions and U-Pb dating opens new perspectives for using rutile in diamond exploration in cratonic areas.
International Geology Review, Vol. 58, 15, pp. 1940-1950.
China
Rare earths
Abstract: Carbonatites are characterized by the highest concentration of rare earth elements (REEs) of any igneous rock and are therefore good targets for REE exploration. Supergene, hydrothermal, and magmatic REE deposits associated with carbonatites have been widely studied. REE enrichment related to fluorapatite metasomatism in Fengzhen carbonatites in the North China block is reported in this study. REE minerals (monazite, britholite, and Ca-REE-fluorocarbonates) associated with barite and quartz formed as inclusions within the fluorapatite and externally on its surface. Monazite, allanite, barite, and quartz occur as rim grains on the edges of the fluorapatite. Zoned fluorapatite was observed and showed varying chemical composition. Based on back-scattered electron imaging, the dark domains with mineral inclusions contain lower Si (0.3-0.6 wt.% SiO2) and light REE (LREE) [0.36-1.54 wt.% (Y+LREE)2O3] contents than inclusion-poor areas [0.7-1 wt.% SiO2; 2.16-4.51 wt.% (Y + LREE)2O3]. This indicates a dissolution-re-precipitation texture. Different types of monazites were distinguished by their chemical compositions. Monazite inclusions have lower La2O3contents (~13 wt.%) and La/Ndcn (~3) ratios than those (18-26 wt.% and 10-14 for La2O3 and La/Ndcn, respectively) growing externally on the fluorapatite. REE enrichment in the metasomatic fluorapatites is related to different stages of carbonatitic liquids. The early carbonatite-exsolved fluids metasomatized the fluorapatites to form REE mineral inclusions. The late carbonatitic fluids from carbonatite magmas that underwent strong fractional crystallization were enriched in REEs, Al, and Fe and metasomatized the fluorapatites to produce allanite and monazite rim grains.
Abstract: Zirconolite, its Ce-, Nd-, and Y-analogs, and laachite, another member of the zirconolite group, are typomorphic minerals of the fenitized xenoliths in nepheline syenite and foidolite of the Khibiny-Lovozero Complex, Kola Peninsula, Russia. All these minerals are formed at the late stage of fenitization as products of ilmentie alteration under the effect of Zr-bearing fluids. The diversity of these minerals is caused by the chemical substitutions of Na and Ca for REE, Th, and U compensated by substitution of Ti and Zr for Nb, Fe and Ta, as well as by the redistribution of REE between varieties enriched in Ti (HREE) or Nb (LREE). The results obtained can be used in the synthesis of Synroc-type titanate ceramics assigned for the immobilization of actinides.
Geochimica et Cosmochimica Acta, Vol. 173, pp. 304-318.
Mantle
Perovskite
Abstract: Partitioning of hydrogen (often referred to as H2O) between periclase (pe) and perovskite (pvk) at lower mantle conditions (24-80 GPa) was investigated using quantum mechanics, equilibrium reaction thermodynamics and by monitoring two H-incorporation models. One of these (MSWV) was based on replacements provided by Mg2+ ? 2H+ and Si4+ ? 4H+; while the other (MSWA) relied upon substitutions in 2Mg2+ ? Al3+ + H+ and Si4+ ? Al3+ + H+. H2O partitioning in these phases was considered in the light of homogeneous (Bulk Silicate Earth; pvk: 75%-pe:16% model contents) and heterogeneous (Layered Mantle; pvk:78%-pe:14% modal contents) mantle geochemical models, which were configured for lower and upper bulk water contents (BWC) at 800 and 1500 ppm, respectively. The equilibrium constant, BWCK(P,T), for the reactions controlling the H-exchange between pe and pvk exhibited an almost negligible dependence on P, whereas it was remarkably sensitive to T, BWC and the hydrogen incorporation scheme. Both MSWV and MSWA lead to BWCK(P,T) ? 1, which suggests a ubiquitous shift in the exchange reaction towards an H2O-hosting perovskite. This took place more markedly in the latter incorporation mechanism, indicating that H2O-partitioning is affected by the uptake mechanism. In general, the larger the BWC, the smaller the BWCK(P,T). Over the BWC reference range, MSWV led to BWCK(P,T)-grand average (?BWCK?) calculated along lower mantle P-T-paths of ?0.875. With regard to the MSWA mechanism, ?BWCK? was more sensitive to BWC (and LM over BSE), but its values remained within the rather narrow 0.61-0.78 range. The periclase-perovskite H2O concentration-based partition coefficient, View the MathML sourceKdH2Ope/pvk, was inferred using ?BWCK ?, assuming both hydrous and anhydrous-dominated systems. MSWV revealed a View the MathML sourceKdH2Ope/pvk-BWC linear interpolation slope which was close to 0 and View the MathML sourceKdH2Ope/pvk values of 0.36 and 0.56 (for anhydrous and hydrous system, respectively). MSWA, in turn, yielded a View the MathML sourceKdH2Ope/pvk trend with a slightly steeper negative BWC -slope, while it may also be considered nearly invariant with View the MathML sourceKdH2Ope/pvk values of 0.31-0.47 in the 800-1500 ppm interval. Combining the MSWV and MSWA results led to the supposition that View the MathML sourceKdH2Ope/pvk lies in the narrow 0.31-0.56 interval, as far as the P-T-BWC values of interest are concerned. This implies that water always prefers pvk to pe. Furthermore, it also suggests that even in lower mantle with low or very low bulk water content, periclase rarely becomes a pure anhydrous phase.
Earth and Planetary Science Letters, Vol. 453, pp. 146-156.
Canada, Ontario
Gravity
Abstract: The Earth's surface was depressed under the weight of ice during the last glaciations. Glacial Isostatic Adjustment (GIA) induces the slow recession of the trough that is left after deglaciation and is responsible for a contemporary uplift rate of more than 1 cm/yr around Hudson Bay. The present-day residual depression, an indicator of still-ongoing GIA, is difficult to identify in the observed topography, which is predominantly sensitive to crustal heterogeneities. According to the most widespread GIA models, which feature a viscosity of on top of the lower mantle, the trough is approximately 100 m deep and cannot explain the observed gravity anomalies across North America. These large anomalies are therefore usually attributed to subcontinental density heterogeneities in the tectosphere or to slab downwelling in the deep mantle.
Abstract: A xenolith of eclogite from the kimberlite pipe Udachnaya-East, Yakutia Grt+Cpx+Ky + S + Coe/Qtz + Dia + Gr has been studied. Graphite inclusions in diamond have been studied in detail by Confocal Raman (CR) mapping. The graphite inclusion in diamond has a highly ordered structure and is characterized by a substantial shift in the band (about 1580 cm-1) by 7 cm-1, indicating a significant residual strain in the inclusion. According to the results of FTIR spectroscopic studies of diamond crystals, a high degree of nitrogen aggregation has been detected: it is present mainly in form A, which means an "ancient" age of the diamonds. In the xenolith studied, the diamond formation occurred about 1 Byr, long before their transport by the kimberlite melt, and the conditions of the final equilibrium were temperatures of 1020 ± 40°C at 4.7 GPa. Thus, these graphite inclusions found in a diamond are the first evidence of crystallization of metastable graphite in a diamond stability field. They were formed in rocks of the upper mantle significantly below (?20 km) the graphite-diamond equilibrium line.
Abstract: Relations of graphite and diamond have been studied in a garnet-kyanite-clinopyroxene+sulfide+coesite/quartz+diamond+graphite eclogite xenolith from the Udachnaya-East kimberlite pipe in the Yakutian diamond province. Euhedral crystals of diamond and graphite occur in the intra- and intergranular space. The equilibrium conditions of diamond formation reconstructed by geothermobarometry for the Grt-Cpx-Ky-Coe mineral assemblage are 1020 ± 40 °C and 4.7 GPa. Raman imaging of graphite enclosed in diamond shows high ordering and a 9 cm?1 shift of the ~1580 cm?1 band. This Raman shift of graphite, as well as a 5 cm?1 shift of the 1332 cm?1 band of diamond, indicate large residual stress in graphite and in diamond around the inclusion, respectively. According to FTIR spectroscopy, nitrogen in diamond is highly aggregated and exists mainly as the A centers, while no other phases occur near graphite inclusions. Therefore, diamond in the analyzed eclogite sample must be quite old: it likely had crystallized long (~1 Byr) before it became entrained with kimberlite melt. New data show that graphite can stay in the upper mantle for billions of years without converting to diamond. Crystallization of various carbon polymorphs, both in laboratory and natural systems, remains poorly constrained. Graphite present in mantle and UHP rocks may be a metastable phase crystallized in the diamond stability field. This fact should be taken into consideration when deducing petrological constrains and distinguishing diamond and graphite subfacies in upper mantle.
Abstract: The Kovdor baddeleyite-apatite-magnetite deposit in the Kovdor phoscorite-carbonatite pipe is situated in the western part of the zoned alkali-ultrabasic Kovdor intrusion (NW part of the Fennoscandinavian shield; Murmansk Region, Russia). We describe major intrusive and metasomatic rocks of the pipe and its surroundings using a new classification of phoscorite-carbonatite series rocks, consistent with the IUGS recommendation. The gradual zonation of the pipe corresponds to the sequence of mineral crystallization (forsterite-hydroxylapatite-magnetite-calcite). Crystal morphology, grain size, characteristic inclusions, and composition of the rock-forming and accessory minerals display the same spatial zonation pattern, as do the three minerals of economic interest, i.e. magnetite, hydroxylapatite, and baddeleyite. The content of Sr, rare earth elements (REEs), and Ba in hydroxylapatite tends to increase gradually at the expense of Si, Fe, and Mg from early apatite-forsterite phoscorite (margins of the pipe) through carbonate-free, magnetite-rich phoscorite to carbonate-rich phoscorite and phoscorite-related carbonatite (inner part). Magnetite displays a trend of increasing V and Ca and decreasing Ti, Mn, Si, Cr, Sc, and Zn from the margins to the central part of the pipe; its grain size initially increases from the wall rocks to the inner part and then decreases towards the central part; characteristic inclusions in magnetite are geikielite within the marginal zone of the phoscorite-carbonatite pipe, spinel within the intermediate zone, and ilmenite within the inner zone. The zoning pattern seems to have formed due to both cooling and rapid degassing (pressure drop) of a fluid-rich magmatic column and subsequent pneumatolytic and hydrothermal processes.
Abstract: In this work we report for the first time the crystallographic orientations of olivine inclusions trapped in diamonds from the Kaapvaal craton (South Africa) determined by single-crystal X-ray diffraction, and analyze them together with all available data in the literature. The overall data set indicates no preferred orientation of the olivine inclusions with respect to their diamond hosts. However, diamonds containing multiple olivine inclusions sometimes show clusters of olivines with the same orientation in the same diamond host. We conclude that such clusters can only be interpreted as the remnants of single olivine crystals pre-dating the growth of the host diamonds.
Geochimica et Cosmochimica Acta, in press available, 14p.
Canada, Africa, Russia
Melting
Abstract: Although terrestrial picritic magmas with FeOTOT ?13 wt.% are rare in the geological record, they were relatively common ca. 2.7 Ga during the Neoarchean episode of enhanced global growth of continental crust. Recent evidence that ferropicritic underplating played an important role in the ca. 2.74-2.70 Ga reworking of the Ungava craton provides the impetus for a comparison of ca. 2.7 Ga ferropicrite occurrences in the global Neoarchean magmatic record. In addition to the Fe-rich plutons of the Ungava craton, volumetrically minor ferropicritic flows, pyroclastic deposits, and intrusive rocks form parts of the Neoarchean greenstone belt stratigraphy of the Abitibi, Wawa, Wabigoon and Vermillion domains of the southern and western Superior Province. Neoarchean ferropicritic rocks also occur on five other Archean cratons: West Churchill, Slave, Yilgarn, Kaapvaal, and Karelia; suggesting that ca. 2.7 Ga Fe-rich magmatism was globally widespread.
Abstract: New thermodynamic data for skiagite garnet (Fe3Fe23+Si3O12) are derived from experimental phase-equilibrium data that extend to 10 GPa and are applied to oxybarometry of mantle peridotites using a revised six-component garnet mixing model. Skiagite is more stable by 12 kJ mol-1 than in a previous calibration of the equilibrium 2 skiagite = 4 fayalite + ferrosilite + O2, and this leads to calculated oxygen fugacities that are higher (more oxidized) by around 1-1•5 logfO2 units. A new calculation method and computer program incorporates four independent oxybarometers (including 2 pyrope + 2 andradite + 2 ferrosilite = 2 grossular + 4 fayalite + 3 enstatite + O2) for use on natural peridotite samples to yield optimum logfO2 estimates by the method of least squares. These estimates should be more robust than those based on any single barometer and allow assessment of possible disequilibrium in assemblages. A new set of independent oxybarometers for spinel-bearing peridotites is also presented here, including a new reaction 2 magnetite + 3 enstatite = 3 fayalite + 3 forsterite + O2. These recalibrations combined with internally consistent PT determinations for published analyses of mantle peridotites with analysed Fe2O3 data for garnets, from both cratonic (Kaapvaal, Siberia and Slave) and circumcratonic (Baikal Rift) regions, provide revised estimates of oxidation state in the lithospheric mantle. Estimates of logfO2 for spinel assemblages are more reduced than those based on earlier calibrations, whereas garnet-bearing assemblages are more oxidized. Importantly, this lessens considerably the difference between garnet and spinel oxybarometry that was observed with previous published calibrations.
Abstract: A new 190Pt-4He method for dating isoferroplatinum has been developed at the Institute of Precambrian Geology and Geochronology, Russian Academy of Sciences. Here we publish the first results of dating of isoferroplatinum from the main mineralogical and geochemical types of PGE mineralization in dunite. The obtained 190Pt-4He age of isoferroplatinum is 129 ± 6 Ma. The gained 190Pt-4He age of isoferroplatinum specimens of different genesis (magmatic, fluid-metamorphogenic, and metasomatic) from the Kondyor Massif indicates that the PGM mineralization took place synchronously and successively with evolution of primarily picrite, followed by subalkaline and alkaline melts of the Mesozoic tectonic-magmatic activation of the Aldan Shield.
Abstract: The Oulad Dlim Massif of the Western Reguibat Shield contains several carbonatite complexes of previously unknown age. The largest and best studied are Gleibat Lafhouda, composed of magnesiocarbonatites, and Twihinate, composed of calciocarbonatites. Gleibat Lafhouda is hosted by Archean gneisses and schists. It has a SHRIMP U-Th-Pb zircon crystallization age of 1.85 ± 0.03 Ga, a Nd model age of TCR = 1.89 ± 0.03 Ga, and a Sm-Nd age of 1.85 ± 0.39 Ga. It forms part of the West Reguibat Alkaline province. Twihinate, on the other hand, is much younger. It is hosted by Late Silurian to Early Devonian deformed granites and has a zircon crystallization age of 104 ± 4 Ma, which is within error of the age of the carbonatites of the famous Richat Structure in the southwest Reguibat Shield. Like these, the Twihinate carbonatites are part of the Mid-Cretaceous Peri-Atlantic Alkaline Pulse. The Twihinate carbonatites contain abundant inherited zircons with ages that peak at ca. 420 Ma, 620 Ma, 2050 Ma, 2466 Ma, and 2830 Ma. This indicates that their substratum has West African rather than, as previously suggested, Avalonian affinities. It has, however, a Paleoproterozoic component that is not found in the neighboring western Reguibat Shield. The 421 Ma to 410 Ma gneissic granites hosting Twihinate are epidote + biotite + Ca-rich garnet deformed I-type to A-type granites derived from magmas of deep origin compatible, therefore, with being generated in a subduction environment. These granites form a body of unknown dimensions and petrogenesis, the study of which will be of key importance for understanding the geology and crustal architecture of this region.
Abstract: Reversed-zoned olivines (Fe-richer cores compared to rims), appear to be ubiquitous in kimberlites with a wide distribution. These olivines generally comprise a subordinate population relative to the dominant normally zoned olivines. However, they are notably more abundant in the megacryst-rich mid-Cretaceous Monastery and early Proterozoic Colossus kimberlites, located on the Kaapvaal and Zimbabwe cratons, respectively. The reverse-zoned olivines at these two localities define compositional fields that are closely similar to those for two olivine megacryst populations of the Cr-poor association which have been documented in the Monastery kimberlite. This points to a genetic link between megacrysts and the reversed zoned olivines. The ubiquitous, occurrence of the Fe-rich (relative to the field for rims) olivines in kimberlites with a wide geographic distribution in turn argues for an intimate link between megacrysts and the host kimberlite. Some large olivines have inclusions of rounded Cr-rich clinopyroxenes, garnets and/or spinel, characterized by fine-scale, erratic internal compositional zoning. Olivines with such chemically heterogeneous Cr-rich inclusions are not derived from disaggregated mantle peridotites, but are rather linked to the Cr-rich megacryst suite. Consequently, they cannot be used as evidence that cores of a majority of kimberlitic olivines are derived from disaggregated mantle peridotites.
Eurelia kimberlite province; new evidence for multi-phase intrusions. Ages for kimberlite zircon ( 277 Ma) Permian intrusive event…. Alluvial diamonds in Springfield Basin.
Department of Primary Industries and Resources South Australia, Report 2015/8, 9p.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 10p.
Global
CSR
Abstract: In South Africa, diamond~ are mined predominantly in rural areas. Kimberlitic diamonds dominate in Limpopo and the Northern Cape Provinces whereas alluvial diamonds are mainly soureed from the North West and Northern Cape Provinces. There are a few large and medium sized diamond companies (De Beers, Petra Diamonds, Trans Hex, Rockwell and Alexkor). There are many smaller companies involved in diamond mining, mostly alluvial diamond mines. The nature of alluvial diamond deposits is that they are aerially more extensive and thus their surface impacts are more pervasive: The recent downturn in diamond prices has resulted in the sudden cessation of mining at many small and medium diamond operations. The South African Mining Charter requires all mines, including diamond mines, to subscribe to .the following empowerment objectives: • Human Resource Development • Employment Equity • Non-Discrimination of Migrant Labourers • Increased Procurement from HDSA Communities • Mine Community and Rural Development • Improvement of Housing and Living Conditions • Change in Ownership/Management and Joint Ventures • Increase in Benificiation. Companies are required to report annually on progress in achieving their commitments qnd these interventions are subject to audit. The recent focus on the West Coast of South Africa (Van Wyk et al., 2009) emphasized the ongoing social problems that persist ill mining communities in spite of mines being there for more than half a century. This paper focuses on the delayed implementation of sustainable development strategies by diamond producers and delayed monitoring by government departments. This delay will continue to result in ongoing negative effects. This is seen across all diamond mining regions in South Africa. Towns like Douglas, Barkley West, Swartruggens and Zebedelia will all show similar levels of post closure decay and dereliction. There is evidence that many companies do report on their compliance to the Mining Scorecard requirements. This is particularly easier to see with listed companies where Scorecard compliance is made public. However, the dilemma facing state departments lies with verifying the accuracy of the information and more critically the impact of the strategies and interventions. Ongoing criticism of diamond producers are that they fail to implement local economic development strategies and thereby leave the communities in which they operate severely destitute. What is often overlooked is that the period to 2009 (from the gazetting of the MPRDA until the conversion of old to new order rights)was a period in which many companies were required to establish their baselines, develop plans and submit these for approval. The current Scorecard indicators emphasise planning, implementation and integration of strategies. This. paper will thus examine the measurement of strategy impact (social, economic and environment) on mining communities and recommend some measures of impact that couid be incorporated into an expanded Scorecard.
Earth and Planetary Science Letters, Vol. 434, pp. 129-140.
Technology
Petrology - experimental
Abstract: Transitional melts, intermediate in composition between silicate and carbonate melts, form by low degree partial melting of mantle peridotite and might be the most abundant type of melt in the asthenosphere. Their role in the transport of volatile elements and in metasomatic processes at the planetary scale might be significant yet they have remained largely unstudied. Their molecular structure has remained elusive in part because these melts are difficult to quench to glass. Here we use FTIR, Raman, 13C and 29Si NMR spectroscopy together with First Principle Molecular Dynamic (FPMD) simulations to investigate the molecular structure of transitional melts and in particular to assess the effect of CO2 on their structure. We found that carbon in these glasses forms free ionic carbonate groups attracting cations away from their usual ‘depolymerising’ role in breaking up the covalent silicate network. Solution of CO2 in these melts strongly modifies their structure resulting in a significant polymerisation of the aluminosilicate network with a decrease in NBO/Si of about 0.2 for every 5 mol% CO2 dissolved. This polymerisation effect is expected to influence the physical and transport properties of transitional melts. An increase in viscosity is expected with increasing CO2 content, potentially leading to melt ponding at certain levels in the mantle such as at the lithosphere-asthenosphere boundary. Conversely an ascending and degassing transitional melt such as a kimberlite would become increasingly fluid during ascent hence potentially accelerate. Carbon-rich transitional melts are effectively composed of two sub-networks: a carbonate and a silicate one leading to peculiar physical and transport properties.
Earth and Planetary Science Letters, Vol. 447, pp. 151-160.
Mantle, Europe, Italy
Kimberlite formation, volcanism, melting
Abstract: Kimberlites are the most deep-seated magmas in the mantle and ascend to the surface at an impressive speed, travelling hundreds of kilometres in just hours while carrying a substantial load of xenolithic material, including diamonds. The ascent dynamics of these melts are buoyancy-controlled and certainly driven by outgassing of volatile species, presumably H2O and CO2, summing to concentration level of ca 15 -30 wt.% in kimberlite melts. We provide H2O -CO2 solubility data obtained on quenched glasses that are synthetic analogues of kimberlite melts (SiO2 content ranging from 18 to 28 wt.%). The experiments were conducted in the pressure range 100 to 350 MPa. While the CO2 solubility can reach 20 wt.%, we show that the H2O solubility in these low silica melts is indistinguishable from that found for basalts. Moreover, whereas in typical basalts most of the water exsolves at shallower pressure than the CO2, the opposite relationship is true for the low-SiO2 composition investigated. These data show that kimberlites can rise to depths of the upper crust without suffering significant degassing and must release large quantities of volatiles (>15 wt.%) within the very last few kilometres of ascent. This unconventional degassing path may explain the characteristic pipe, widening-upward from a ?2.5 km deep root zone, where kimberlites are mined for diamonds. Furthermore, we show that small changes in melt chemistry and original volatile composition (H2O vs. CO2) provide a single mechanism to explain the variety of morphologies of kimberlite pipes found over the world. The cooling associated to such massive degassing must freeze a large quantity of melt explaining the occurrence of hypabyssal kimberlite. Finally, we provide strong constraints on the primary volatile content of kimberlite, showing that the water content reported for kimberlite magma is mostly reflective of secondary alteration.
Abstract: Carbon dioxide is the most abundant volatile in kimberlite melts and its solubility exerts a prime influence on the melt structure, buoyancy, transport rate and hence eruption dynamics. The actual primary composition of kimberlite magma is the matter of some debate but the solubility of CO2 in kimberlitic melts is also poorly constrained due to difficulties in quenching these compositions to a glass that retains the equilibrium CO2 content. In this study we used a range of synthetic, melt compositions with broadly kimberlitic to carbonatitic characteristics which can, under certain conditions, be quenched fast enough to produce a glass. These materials are used to determine the CO2 solubility as a function of chemical composition and pressure (0.05-1.5 GPa). Our results suggest that the solubility of CO2 decreases steadily with increasing amount of network forming cations from ~ 30 wt.% CO2 at 12 wt.% SiO2 down to ~ 3 wt.% CO2 at 40 wt.% SiO2. For low silica melts, CO2 solubility correlates non-linearly with pressure showing a sudden increase from 0.1 to 100 MPa and a smooth increase for pressure > 100 MPa. This peculiar pressure-solubility relationship in low silica melts implies that CO2 degassing must mostly occur within the last 3 km of ascent to the surface having potential links with the highly explosive nature of kimberlite magmas and some of the geo-morphological features of their root zone. We present an empirical CO2 solubility model covering a large range of melt composition from 11 to 55 wt.% SiO2 spanning the transition from carbonatitic to kimberlitic at pressures from 1500 to 50 MPa.
Abstract: Why has Zimbabwe, a state that has been notorious for an utter disregard of international agreements, spent resources to implement policies that are in compliance with the Kimberley Process diamond certification scheme? In this research I explain variation in Zimbabwean regulatory policy in response to the Kimberley Process since 2003. This article contends that this variation can be best understood by tracing the political economy of factional rivalries within the ruling Zimbabwe African National Union - Patriotic Front (ZANU-PF) party. This research demonstrates that although the behavior of international regimes and private economic actors matter, in Zimbabwe it is government factions within ZANU-PF that are the main decision makers in relation to Kimberley Process regulations. This explains both why compliance with the Kimberley Process has been lower than other states in Southern Africa and why Zimbabwe has raised its level of compliance with the regulatory regime overtime.
Abstract: Why has Zimbabwe, a state that has been notorious for an utter disregard of international agreements, spent resources to implement policies that are in compliance with the Kimberley Process diamond certification scheme? In this research I explain variation in Zimbabwean regulatory policy in response to the Kimberley Process since 2003. This article contends that this variation can be best understood by tracing the political economy of factional rivalries within the ruling Zimbabwe African National Union - Patriotic Front (ZANU-PF) party. This research demonstrates that although the behavior of international regimes and private economic actors matter, in Zimbabwe it is government factions within ZANU-PF that are the main decision makers in relation to Kimberley Process regulations. This explains both why compliance with the Kimberley Process has been lower than other states in Southern Africa and why Zimbabwe has raised its level of compliance with the regulatory regime overtime.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 18p.
Africa, South Africa
Deposit - Finsch
Abstract: Finsch Mine is a kimberlite diamond mine located at Lime Acres in the Northern Cape Province of South Africa. The mine was founded in 1961 and started surface mining in 1964. Underground production commenced in 1990 using a modified blast-hole open stoping method for the mining of Blocks 1, 2 and 3. Block 4 is currently being mined as a block cave. The process of identifying and optimizing a method to mine the Block 5 orebody started in 1991, and in 2006 incline caving was identified as being technically feasible. This paper aims to document the process employed in developing this method by the Block 5 pre-feasibility team as well as discuss the technical challenges encountered during this process. The paper commences with a history of Finsch Mine and highlights the complex geology and threat of sidewall failure that prompted the decision to use block caving as the mining method for Block 4. A literature study of mines that implemented mining methods upon which the incline cave was conceptualized is then presented. These practices were then used to form the basis for the designs on which the initial geotechnical modelling was done and built upon through an iterative process of modelling and design changes. The ventilation of the mining area, initial productivity simulation results, and the applicability of automation and comminution processes in the incline cave are also presented. The paper concludes with an investigation into some of the challenges of the mining method, and shows that that incline caving is a technical option available for further investigation in determining the optimal mining method to be employed at Block 5, Finsch Diamond Mine.
Geochimica et Cosmochimica Acta, In press available 39p.
Mantle
Melting
Abstract: Hydrous melting at high pressures affects the physical properties, dynamics and chemical differentiation of the Earth. However, probing the compositions of hydrous melts at the conditions of the deeper mantle such as the transition zone has traditionally been challenging. In this study, we conducted high pressure multianvil experiments at 13 GPa between 1200 and 1900 °C to investigate the liquidus in the system MgO-SiO2-H2O. Water-rich starting compositions were created using platinic acid (H2Pt(OH)6) as a novel water source. As MgO:SiO2 ratios decrease, the T-XH2OXH2O liquidus curve develops an increasingly pronounced concave-up topology. The melting point reduction of enstatite and stishovite at low water contents exceeds that predicted by simple ideal models of hydrogen speciation. We discuss the implications of these results with respect to the behaviour of melts in the deep upper mantle and transition zone, and present new models describing the partitioning of water between the olivine polymorphs and associated hydrous melts.
Journal of Geophysical Research,, Vol. 120, 11, pp. 7440-7459.
Mantle
Melting
Abstract: The behavior of volatiles in silicate-COH melts and fluids and hydrogen isotope fractionation between melt and fluid were determined experimentally to advance our understanding of the role of volatiles in magmatic processes. Experiments were conducted in situ while the samples were at the desired temperature and pressure to 825°C and ~1.6?GPa and with variable redox conditions. Under oxidizing conditions, melt and fluid comprised CO2, CO3, HCO3, OH, H2O, and silicate components, whereas under reducing conditions, the species were CH4, H2, H2O, and silicate components. Temperature-dependent hydrogen isotope exchange among structural entities within coexisting fluids and melts yields ?H values near 14 and 24?kJ/mol and ?5 and ?1?kJ/mol under oxidizing and reducing conditions, respectively. This temperature (and probably pressure)-dependent D/H fractionation is because of interaction between D and H and silicate and C-bearing species in silicate-saturated fluids and in COH fluid-saturated melts. The temperature- and pressure-dependent D/H fractionation factors suggest that partial melts in the presence of COH volatiles in the upper mantle can have ?D values 100% or more lighter relative to coexisting silicate-saturated fluid. This effect is greater under oxidizing than under reducing conditions. It is suggested that ?D variations of upper mantle mid-ocean ridge basalt (MORB) sources, inferred from the ?D of MORB magmatic rocks, can be explained by variations in redox conditions during melting. Lower ?D values of the MORB magma reflect more reducing conditions in the mantle source.
Abstract: To study the kinetics of the spinel-to-garnet transformation in peridotite, we conducted reaction experiments in the garnet peridotite stability field (3.2 GPa, 1020-1220 °C, for 0.6-30 h) using a single spinel crystal embedded in monomineralic orthopyroxene powder or in a mixture of powdered orthopyroxene and clinopyroxene. The growth textures observed in the reaction rim between the spinel crystal and the polycrystalline pyroxenes show that the reaction rim grew in both the spinel and pyroxenes directions, suggesting mobility of both SiO2 and R2O3 components (where R is a trivalent cation). Olivine grains formed only in the presence of monomineralic orthopyroxene and were present in some domains without forming reaction rims. Based on a diffusion-controlled growth model, the growth kinetics of the garnet reaction rim can be described by [x(t)]2 = k0 exp(?H*/RT)t, where x(t) is the rim width at time t, R is the gas constant, T is the absolute temperature, and H* is the activation enthalpy of reaction; k0 and H* are, respectively, k0 = 10?19.8 ± 4.9 m2/s and H* = 171 ± 58 kJ/mol. The development of a garnet reaction rim around a spinel core has been observed in alpine-type peridotitic rocks and mantle xenoliths. The reaction rims experimentally produced in this study are characteristic of corona textures observed in natural rocks, and the experimentally measured growth rate of the rims places important constraints on dynamic transformation processes involving spinel and garnet in peridotite. However, to reconstruct the P-T-t history of the corona texture based on these elementary processes, additional detailed studies on the textural evolution and quantitative kinetics of the garnet-rim growth stage are required.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, 10, pp. 3400-3413.
Mantle
Geothermometry
Abstract: We investigate the influence of tectonic mode on the thermochemical evolution of simulated mantle convection coupled to a parameterized core cooling model. The tectonic mode is controlled by varying the friction coefficient for brittle behavior, producing the three tectonic modes: mobile lid (plate tectonics), stagnant lid, and episodic lid. The resulting compositional structure of the deep mantle is strongly dependent on tectonic mode, with episodic lid resulting in a thick layer of subducted basalt in the deep mantle, whereas mobile lid produces only isolated piles and stagnant lid no basaltic layering. The tectonic mode is established early on, with subduction initiating at around 60 Myr from the initial state in mobile and episodic cases, triggered by the arrival of plumes at the base of the lithosphere. Crustal production assists subduction initiation, increasing the critical friction coefficient. The tectonic mode has a strong effect on core evolution via its influence on deep mantle structure; episodic cases in which a thick layer of basalt builds up experience less core heat flow and cooling and a failed geodynamo. Thus, a continuous mobile-lid mode existing from early times matches Earth's mantle structure and core evolution better than an episodic mode characterized by large-scale flushing (overturn) events.
Abstract: The relative abundance of light elements in the Earth’s core has long been controversial. Recently, the presence of carbon in the core has been emphasized, because the density and sound velocities of the inner core may be consistent with solid Fe7C3. Here we report the longitudinal wave velocity of liquid Fe84C16 up to 70?GPa based on inelastic X-ray scattering measurements. We find the velocity to be substantially slower than that of solid iron and Fe3C and to be faster than that of liquid iron. The thermodynamic equation of state for liquid Fe84C16 is also obtained from the velocity data combined with previous density measurements at 1 bar. The longitudinal velocity of the outer core, about 4% faster than that of liquid iron, is consistent with the presence of 4-5 at.% carbon. However, that amount of carbon is too small to account for the outer core density deficit, suggesting that carbon cannot be a predominant light element in the core.
Abstract: Raman spectral characteristics of a range of diamond-based abrasives (powders and sprays) and drilling and cutting tools, originating from preparation laboratories worldwide, are presented. Some abrasives show strong broadening of the main diamond band [FWHM (full width at half band-maximum) > 5 cm? 1] accompanied by strong band-downshift (View the MathML source?˜ = 1316-1330 cm? 1). Others are characterised by moderate band broadening (FWHM = 1.8-5 cm? 1) at rather regular band position (View the MathML source?˜ = 1331-1333 cm? 1). In addition we found that a "fresh" abrasive and its used analogue may in some cases show vast differences in their Raman spectra. The Raman parameters of diamond-based abrasives overlap widely with Raman parameters of UHP (ultra-high pressure) microdiamond. It is hence impossible to assign diamond detected in a geological specimen to either an introduced artefact or a genuine UHP relict, from the Raman spectrum alone. Raman is an excellent technique for the detection of minute amounts of diamond; however it does not provide conclusive evidence for the identification of UHP microdiamond. The latter requires thorough verification, for instance by optical microscopy or, if doubts cannot be dispelled, transmission electron microscopy.
Deposit - Bayan Obo, Mountain Pass, Motzfeldt, Ilimaussaq
Abstract: Rare earth elements (REEs) generate characteristic absorption features in visible to shortwave infrared (VNIR-SWIR) reflectance spectra. Neodymium (Nd) has among the most prominent absorption features of the REEs and thus represents a key pathfinder element for the REEs as a whole. Given that the world’s largest REE deposits are associated with carbonatites, we present spectral, petrographic, and geochemical data from a predominantly carbonatitic suite of rocks that we use to assess the feasibility of imaging REE deposits using remote sensing. Samples were selected to cover a wide range of extents and styles of REE mineralization, and encompass calcio-, ferro- and magnesio-carbonatites. REE ores from the Bayan Obo (China) and Mountain Pass (United States) mines, as well as REE-rich alkaline rocks from the Motzfeldt and Ilímaussaq intrusions in Greenland, were also included in the sample suite. The depth and area of Nd absorption features in spectra collected under laboratory conditions correlate positively with the Nd content of whole-rock samples. The wavelength of Nd absorption features is predominantly independent of sample lithology and mineralogy. Correlations are most reliable for the two absorption features centered at ~744 and ~802 nm that can be observed in samples containing as little as ~1,000 ppm Nd. By convolving laboratory spectra to the spectral response functions of a variety of remote sensing instruments we demonstrate that hyperspectral instruments with capabilities equivalent to the operational Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) and planned Environmental Mapping and Analysis Program (EnMAP) systems have the spectral resolutions necessary to detect Nd absorption features, especially in high-grade samples with economically relevant REE accumulations (Nd > 30,000 ppm). Adding synthetic noise to convolved spectra indicates that correlations between Nd absorption area and whole-rock Nd content only remain robust when spectra have signal-to-noise ratios in excess of ~250:1. Although atmospheric interferences are modest across the wavelength intervals relevant for Nd detection, most REE-rich outcrops are too small to be detectable using satellite-based platforms with >30-m spatial resolutions. However, our results indicate that Nd absorption features should be identifiable in high-quality, airborne, hyperspectral datasets collected at meter-scale spatial resolutions. Future deployment of hyperspectral instruments on unmanned aerial vehicles could enable REE grade to be mapped at the centimeter scale across whole deposits.
Abstract: At mid-ocean ridges, the directions in which plates spread and the underlying mantle flows were thought to broadly align. A synthesis of results from ridges that spread at a variety of rates reveals that instead there may be a systematic skew.
Abstract: Lonsdaleite, also called hexagonal diamond, has been widely used as a marker of asteroidal impacts. It is thought to play a central role during the graphite-to-diamond transformation, and calculations suggest that it possesses mechanical properties superior to diamond. However, despite extensive efforts, lonsdaleite has never been produced or described as a separate, pure material. Here we show that defects in cubic diamond provide an explanation for the characteristic d-spacings and reflections reported for lonsdaleite. Ultrahigh-resolution electron microscope images demonstrate that samples displaying features attributed to lonsdaleite consist of cubic diamond dominated by extensive {113} twins and {111} stacking faults. These defects give rise to nanometre-scale structural complexity. Our findings question the existence of lonsdaleite and point to the need for re-evaluating the interpretations of many lonsdaleite-related fundamental and applied studies.
Abstract: Beneath eastern North Dakota lays the Superior Craton and the potential for continued diamond exploration as well as diamond mine development. The Superior Craton is a large piece of Earth’s crust that has been tectonically stable for over 2.5 billion years. The long duration of tectonic stability has allowed the underlying mantle to cool enough to develop the necessary temperature and pressure conditions to form diamonds at depths of more than 50 miles below the surface. Diamonds are transported to the surface through kimberlitic eruptions, which are volcanic eruptions that originate tens of miles below the surface and typically erupt along zones of weakness in Earth’s crust such as faults and fractures. The resulting eruption commonly forms a pipe-shaped geologic feature called a kimberlite. Kimberlites typically occur in groups referred to as either fields or clusters. Although some kimberlites contain high concentrations of diamonds, most either contain relatively low concentrations or are completely barren of diamonds. North Dakota's first diamond exploration test well was drilled during 2010 in Pembina County, located in the northeastern corner of the state (Nesheim, 2013). Although this diamond test well failed to encounter a kimberlite, the growing number of kimberlites being discovered and diamond mine projects being developed across the Superior Craton suggests diamond exploration will continue into North Dakota’s future (figs. 1 and 2). Understanding the distribution and approximate emplacement (eruption) ages of currently discovered kimberlites across the Superior Craton may provide insight into exploring for, and predicting, the distribution of possible kimberlites within eastern North Dakota.
Abstract: We describe a new methodology to collect energy domain Mössbauer spectra of inclusions in natural diamonds using a Synchrotron Mössbauer Source (SMS). Measurements were carried out at the Nuclear Resonance beamline ID18 at the European Synchrotron Radiation Facility (Grenoble, France). We applied this non-destructive approach to collect SMS spectra of a ferropericlase inclusion still contained within its diamond host from Juina (Brazil). The high spatial resolution of the measurement (~ 15 ?m) enabled multiple regions of the 190 × 105 ?m2 inclusion to be sampled and showed that while Fe3 +/Fetot values in ferropericlase were below the detection limit (0.02) overall, there was a magnetic component whose abundance varied systematically across the inclusion. Hyperfine parameters of the magnetic component are consistent with magnesioferrite, and the absence of superparamagnetism allows the minimum particle size to be estimated as ~ 30 nm. Bulk Fe3 +/Fetot values are similar to those reported for other ferropericlase inclusions from Juina, and their variation across the inclusion can provide constraints on its history.
International Geology Review, Vol. 58, 3, pp. 263-276.
Mantle
Diamond genesis
Abstract: Earth is a water planet, but how much water exists on and in the Earth? Is the water limited to the Earth’s surface and limited depths of our planet (molecular water of the hydrosphere), or do deep reservoirs of hydrogen and oxygen really exist as proposed in recent works but not yet proven? Due to the importance of H2O for life and geological processes on the Earth, these questions are among the most significant in all of the Earth sciences. Water must be present in the deep Earth as plate tectonics could not work without water as a major driving force that lowers both viscosity and density of the solid mineral phases of the interior and controls the onset of melting. On subduction, water is returned to the hydrosphere first by dewatering of hydrous phases and second by melting and arc magmatism in and above the subducting slab. The mantle is composed of oxygen minerals, and the extent to which hydrogen is dissolved in them constitutes the true reservoir of the planet’s water. Are ‘deep water and diamonds’ intimately related as indicated in the title of the present article? What is the connection between these two important terrestrial materials? The necessity to review this issue arises from the recent discovery of a strongly hydrous ringwoodite in a Brazilian diamond. As ringwoodite constitutes 60% or more of the lower part of the transition zone, between 525 and 660 km depth, this could correspond to a huge amount of water in this region, comparable or greater in mass to all of Earth’s hydrosphere. If the water found in this ringwoodite is representative of the water concentrations of the transition zone, then estimates of Earth’s total water reservoir are in need of major revision. This work is an attempt at such a revision.
International Journal of Mineral Processing, Vol. 144, pp. 1-10.
South America, Brazil
Carbonatite
Abstract: The rare earth elements (REE) are essential for a wide range of applications, from strategic assets (e.g. petroleum cracking, magnets for wind turbines) to popular merchandise, as smartphones. Since 2010, when China, the worlds close to exclusive REE supplier, imposed export quotas, several old and new deposits have been evaluated to compensate market shortage, taking advantage of significant price rises. The Araxá rare earth elements prospect boast a large reserve (6.34Mt @ 5.01% REO), as well as phosphate and niobium, in a deeply weathered ore of carbonatitic origin. The mineralogy and the ore properties are unconventional for rare earth elements, and require a detailed mineralogical and technological characterisation as starting point to develop a feasible processing route. Rare earths are predominantly carried by monazite (over 70%), and by a solid solution of the plumbogummite group minerals where the barium-rich term gorceixite predominates, while cerianite and bastnaesite account for less than 1% each. Minerals of the pyrochlore supergroup are the main Nb carriers, but phosphate is also due to monazite and the plumbogummite group minerals, as apatite has barely been detected. Goethite, high-Al hematite and quartz are the main gangue minerals, and goethite is thoroughly intergrown with the other phases. Fine particle size (P50 close to 45?m) and 47.4% of the REE in the ?20?m size fraction is another feature typical of this kind of ore. The mineralogical and textural complexity of the ore required a comprehensive technological characterisation in order to evaluate processing options. Based on textural measurements, the concentration of monazite, the concentration of the REE carrying minerals and the reverse removal of quartz, as processing option for this ore, have been simulated. Incomplete liberation of monazite does limit its grade in an ideal concentrate to 80%, and its recovery to 70%. The low monazite recovery must be added to the loss of REE carried by other phases, reducing the overall REE recovery to below 45%. Monazite has also a very limited exposition of the mineral on the particle's surfaces, supposed to impair process efficiency enough to keep experimental results significantly far from the simulated ones. The concentration of the REE-bearing minerals might be efficient from the liberation point of view, and over 90% of the REE carriers can be recovered to a 97% grade concentrate. Due to the low REE grade of predominant gorceixite (3.3%), however, the concentrate's grade of 14% REE is just slightly above the double of the ore's grade. For the REE-bearing minerals taken together, the process efficiency might be hampered by selectivity due to the complex mineralogy. The major gangue minerals, goethite and hematite, are strongly intergrown with the other minerals of the assemblage, to an extent that evaluating reverse processing considering these phases was not feasible. The removal of quartz by reverse processing is quite straightforward, and 95% of the mineral might be removed to a high-grade quartz concentrate of 93%, with loss of REE of only 0.14%. The mass discharge of 8.7%, however, rises the grade of the concentrate only to 7.3% REE. Complex mineralogy and the fine crystals and particles with strong intergrowth that characterise the ore hamper efficient concentration for the Araxá REE ore, and direct hydrometallurgical processing of the whole was adopted. The results are in agreement with the few other published attempts to concentrate the rare earth minerals from residual lateritic ores related to carbonatites
Canadian Journal of Earth Sciences, Vol. 53, 1, pp. 41-58.
Canada, Northwest Territories
Deposit - Muskox
Abstract: We present petrography, mineralogy, and thermobarometry for 53 mantle-derived xenoliths from the Muskox kimberlite pipe in the northern Slave craton. The xenolith suite includes 23% coarse peridotite, 9% porphyroclastic peridotite, 60% websterite, and 8% orthopyroxenite. Samples primarily comprise forsteritic olivine (Fo 89-94), enstatite (En 89-94), Cr-diopside, Cr-pyrope garnet, and chromite spinel. Coarse peridotites, porphyroclastic peridotites, and pyroxenites equilibrated at 650-1220 °C and 23-63 kbar (1 kbar = 100 MPa), 1200-1350 °C and 57-70 kbar, and 1030-1230 °C and 50-63 kbar, respectively. The Muskox xenoliths differ from xenoliths in the neighboring and contemporaneous Jericho kimberlite by their higher levels of depletion, the presence of a shallow zone of metasomatism in the spinel peridotite field, a higher proportion of pyroxenites at the base of the mantle column, higher Cr2O3 in all pyroxenite minerals, and weaker deformation in the Muskox mantle. We interpret these contrasts as representing small-scale heterogeneities in the bulk composition of the mantle, as well as the local effects of interaction between metasomatizing fluid and mantle wall rocks. We suggest that asthenosphere-derived pre-kimberlitic melts and fluids percolated less effectively through the less permeable Muskox mantle, resulting in lower degrees of hydrous weakening, strain, and fertilization of the peridotitic mantle. Fluids tended to concentrate and pool in the deep mantle, causing partial melting and formation of abundant pyroxenites.
Journal of Volcanology and Geothermal Research, Vol. 310, pp. 1-11.
China
LiDAR
Abstract: Dyke geometries are useful indicators of the palaeostress field during magma emplacement. In this paper, we present a multi-scale extraction method of dyke geometries by integrating WorldView-2 (WV2) imagery and terrestrial light detection and ranging (LiDAR) data. Color composite and fusion WV2 images with 0.5-m resolution were generated by using the Gramm-Schmidt Spectral Sharpening approach, which facilitates the discrimination of dyke swarms and provides the ability to measure the orientation, exposed length, and thickness of dykes in sub-horizontal topographic exposures. A terrestrial laser scanning survey was performed on a sub-vertical exposure of dykes to obtain LiDAR data with point spacing of ~ 0.02 m at 30 m. The LiDAR data were transformed to images for extracting dyke margins based on image segmentation, then the dyke attitudes, thicknesses, and irregularity of dyke margins were measured according to the points on dyke margins. This method was applied at Sijiao Island, Zhejiang, China where late Cretaceous mafic dyke swarms are widespread. The results show that integrating WV2 imagery and terrestrial LiDAR improves the accuracy, efficiency, and objectivity in determining dyke geometries in two and three dimensions. The ENE striking dykes are dominant, and intruded the host rock (mainly granite) with sub-vertical dips. Based on the aspect ratios of the dykes, the magmatic overpressure was estimated to be less than 11.5 MPa, corresponding to a magma chamber within 6.6 km in the lithosphere.
Abstract: Diamonds form from fluids or melts circulating at depth in the Earth's mantle. Analysis of these fluids is possible if they remain entrapped in the diamond during its growth, but this is rarely observed in gem-quality stones. We provide the first evidence that typical mineral inclusions in gem-quality diamonds from the Siberian and Kaapvaal cratons are surrounded by a thin film of hydrous silicic fluid of maximum thickness 1.5 ?m. The fluid contains Si2O(OH)6, Si(OH)4, and molecular H2O and was identified using confocal micro-Raman spectroscopy and synchrotron-based X-ray tomographic microscopy. As the solid mineral inclusions have both peridotitic and eclogitic affinities and occur in two cratonic regions, our results demonstrate the strong connection between water-rich fluids and the growth of gem-quality lithospheric diamonds. The presence of the fluid films should be taken into account for a proper evaluation of H2O contents in the mantle based on H2O contents in solid inclusions and for a robust assessment of diamond formation pressures based on the residual pressures of the inclusions.
Abstract: The levels of brilliance (brightness and contrast), fire (flashes of rainbow color), and scintillation (intense sparkles when moved) of diamonds are unmatched by any other gemstone. Also diamonds of gem size and quality are relatively rare. As a result, gem diamonds are extremely valuable, yet the supply of diamonds is ultimately limited. This reality has pushed diamond exploration and mining into extreme environments, from the far Arctic North to the deserts of southern Africa and onto the ocean bed off the coast of Namibia. About two-thirds of the annual production of diamonds by weight comes from ancient volcanoes that consist of the rock types kimberlite, orangeite, or lamproite. Tracking down the remnants of these small volcanoes requires sophisticated and efficient collection and processing of samples for kimberlite indicator minerals (i.e., peridotite constituent minerals) and evaluation of enormous amounts of mineral data to constrain the diamond prospectivity of a region, cluster of pipes, or particular diatreme. The exploration sampling stage is usually followed by aero- or ground-geophysical measurements, target evaluation, and, finally, drill testing. Diamond exploration is expensive, but the rewards can be great. Diamond exploration in Finland started in 1985, and has been continuous, albeit with varying levels of activity, since that time. As a result, diamondiferous rocks have been found in three regions—namely, the Kuhmo-Lentiira area hosting a group of 1200 Ma orangeites, the Kuusamo-Hossa area containing several 760 Ma kimberlites, and the Kaavi-Kuopio area with a cluster of ?600 Ma kimberlites. Driven by the needs of these exploration activities, our understanding of the makeup of the Karelian craton, and our understanding of the magmas that have transported diamonds to the surface in this part of the world have benefitted enormously.
Geological Society of America Annual Meeting, Vol. 47, 7, p. 169. abstract
Russia
Metamorphic diamonds
Abstract: The metamorphic diamonds in the Kokchetav Massif show very diverse features in morphologies and grain sizes with other crystal characters, Raman spectra (FWHM, PL), cathodoluminescence spectra, C isotope, abundance, paragenesis with silicates and carbonates. The formations of these diamonds, however, seem to be related to H2O-fluid conditions.?Dolomite marble has the highest abundance in diamond. The diamond grew at two stages and 2nd stage growth was from H2O fluid. Grt-Bt gneiss is 2nd highest and the diamond shows several morphologies; however, no 2nd stage growth. In dolomite marble, diamond at 2nd stage has light carbon isotope, -17 to -27 whereas 1st stage diamond has -8 to -15. The light carbon of 2nd stage could be organic carbon in gneisses carried by H2O-fluid; dissolution of diamond in gneisses could have occurred. No 2nd stage growth in gneisses supports this idea. Carbon-bearing H2O fluid infiltration into dolomite marble caused the change of carbon solubility in fluid to precipitate abundant fine diamonds (10-20 mm), quickly. Recently discovered sp2 graphitic carbon inclusions in 2nd stage diamond (AGU2014F V13B-4771), which is a relic of metastable intermediate phase for diamond formation, suggest the diamond participation from H2O fluid. A minor amount of diamond (large-grained, ca. 150 µm at average) occurs in Grt-Cpx rock. Recently, we found the overgrowth of large-grained cubic diamond on small-grained one by multi-layered 2D Raman mappings (JpGU2014 No.02541). This indicates slow-growth in H2O-fluid having low oversaturation degree of carbon. UHP calcite marble contains a trace amount of small-grained diamond (no 2nd stage growth) only in diopside; titanite with coesite exsolution does not contain diamond. These suggest that very high H2O activity for titanite stability makes diamond unstable, and dissolution of diamond was possible. This is a similar relation with UHP dolomitic marble, which Arg-Fo and Arg-Ti-Chum were stable but diamond was unstable. In Tur-Fel-Qtz rock, diamond is included in new mineral "maruyamaite" (K-rich Tur); recent experiments show high-P and fluid-bearing conditions for maruyamaite. Summarizing these diverse features of the Kokchetav diamonds, those formation and their possible dissolutions have strong relationships with H2O-fluid conditions.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 14p.
Africa, South Africa
Deposit - Finsch
Abstract: De Beers' Finsch Mine is situated in the Northern Cape ,province, 170 km northwest of Kimberley. The concentrator facility, designed and constructed by Bateman Engineering, was commissioned in 1967 and upgraded in 1979 using diamond liberation and extraction technology available at the time of design. Since then significant advances in diamond processing and technology have been made and these -have been incorporated into the new main treatment plant and recovery plant flowsheets, making diamond liberation and recovery from the Pre-1979 dumps a viable economic option at Finsch." Significant challenges were experienced as a result of the integration of new technology and its associated infrastructure into an existing plant. Major process flow changes were implemented during the execution phase of the project. The combined effect of these issues resulted in the project being overspent by 25% and the final handover to the Client was some 18 months later than originally planned." The paper highlights some of the difficulties experienced as a result of changes made during the execution phases of the project.
Journal of South American Earth Sciences, Vol. 72, pp. 302-314.
South America, Paraguay
Magmatism
Abstract: The amalgamation of the Western Gondwana (including the Greater Gondwana supercraton) occurred at 600 Ma during the Brazilian - Pan African orogeny. A plate junction related to this event is marked by the Transbrazilian lineament which separates the South American continent into two sectors: the Eastern Paraguay-Brazilian and Central Andean domains. An overview of the geodynamic data from these two sectors indicates that the two domains were subjected to distinct evolutions from the Proterozoic to the present. The Andean domain is characterized by long-lived subduction processes linked to the convergence and consequent collision of microplates since the Middle Proterozoic (western Amazonian Craton) with a peak at about 600-580 Ma. The Paraguay-Brazilian domain remained relatively stable but was affected by extension episodes that reactivated ancient (Early and Middle Proterozoic) suture zones. These different geodynamic evolutions seem to reflect broadly distinct mantle compositions. In the subduction zones of the Andean domain the mantle was deeply modified by metasomatic processes following the subduction of oceanic plates. Consequently, the Andean type magma sources show a clear HIMU imprint inherited from the MORB, whereas the Paraguay-Brazilian sector shows a prevalent EMI and subordinate EMII character. The petrological data mainly from Mesozoic and Cenozoic magmatic events in the two sectors are reviewed to investigate the current mantle plume and mantle dome models for the uprising of the asthenospheric (or sub-lithospheric) material.
Omarini, R.H., Gasparon, M., De Min, A.M., Comin-Chiaramonti, P.
An overview of the Mesozoic-Cenozoic magmatism and tectonics of Eastern Paraguay and central Andes ( western Gondwana): implications for the composition of mantle sources.
Journal of South American Earth Sciences, In press available, 19p.
The Archean- Paleoproterozoic evolution of the western margin of the Slave Craton and its influence on on-craton diamonds. Second talk same day: The role of subduction in the distribution of eclogite below the Slave Craton.
Vancouver Kimberlite Cluster, Oct. 7, 1p. Abstract
Abstract: This talk shortly reviewed geological and geochemical mechanisms of the deep lithosphere, a layer composed of the Earth's crust and uppermost mantle at a depth range of 100-150km below the surface. Definition of these processes at depth, reflects on surface recovery of gem and heavy minerals, of which metallic minerals were stressed out. Prof. O'reilley has also referred to Shefa Yamim's exploration area in northern Israel where the eruption of gem-bearing volcanic rocks appears to be related to a major lithospheric suture (the Dead Sea Transform) and related faulting. The Dead Sea Transform is a 1000km plate boundary stretching out from Turkey in the north to Eilat Bay in the south. As such, it is a preferred pathway for magma emplacement crystalizing in volcanic bodies that are being surveyed by Shefa Yamim as Primary Sources for gem and heavy minerals.
International Journal of Remote Sensing, Vol. 37, 12, pp. 2727-2779.
Canada, Ontario
News item - permafrost
Abstract: Permafrost is an important ground thermal condition that has significant biophysical and socio-economic impacts. In order to better understand the distribution and dynamics of permafrost, there is a need to map permafrost at high spatial resolution. This study is part of a research project that aims to model and map permafrost using remote sensing images and the Northern Ecosystem Soil Temperature (NEST) model in the central part of the Hudson Bay Lowland in northern Ontario, Canada. The study area is near the southern margin of permafrost region where permafrost exists only in isolated patches. In this study, we ran the NEST model from 1932 to 2012 using a climate data set compiled from station observations and grid data sources. The model outputs were then compared to field observations acquired during 2009 -2012 at seven peat monitoring stations and two flux towers, which represent three major types of peatland in the study area (bog, fen, and palsa). The simulated soil temperatures at various depths show good agreement with the observations, and the simulated latent and sensible heat fluxes and net radiation are similar to the observations at the two flux towers. The model accurately shows the existence of permafrost only at palsa sites. Based on the general range of climate and ground conditions in this area, sensitivity tests indicate that the modelled permafrost conditions are sensitive to leaf area index, air temperature, precipitation, and soil texture. Therefore, the NEST model is capable of simulating ground temperature and permafrost conditions in where permafrost occurs only sporadically. A companion paper (part 2) uses the model with Landsat and Radarsat imagery to map the distribution and dynamics of permafrost in this area.
Abstract: Gem corundum (sapphire) has been mined from an ultramafic lamprophyre dike at Yogo Gulch in central Montana for over 100 years. The sapphires bear signs of corrosion showing that they were not in equilibrium with the lamprophyre that transported them; however, their genesis is poorly understood. We report here the observation of minute glassy melt inclusions in Yogo sapphires. These inclusions are Na- and Ca-rich, Fe-, Mg-, and K-poor silicate glasses with compositions unlike that of the host lamprophyre. Larger, recrystallized melt inclusions contain analcime and calcite drawing a striking resemblance to leucocratic ocelli in the lamprophyre. We suggest here that sapphires formed through partial melting of Al-rich rocks, likely as the lamprophyre pooled at the base of the continental crust. This idea is corroborated by MELTS calculations on a kyanite-eclogite protolith which was presumably derived from a troctolite precursor. These calculations suggest that corundum can form through peritectic melting of kyanite. Linking the melt inclusions petrologically to the lamprophyre represents a significant advancement in our understanding of sapphire genesis and sheds light on how mantle-derived magmas may interact with the continental crust on their ascent to the surface.
Abstract: In this study, we report the first direct evidence for water-bearing fluids in the uppermost lower mantle from natural ferropericlase crystal contained within a diamond from São Luíz, Brazil. The ferropericlase exhibits exsolution of magnesioferrite, which places the origin of this assemblage in the uppermost part of the lower mantle. The presence of brucite-Mg(OH)2 precipitates in the ferropericlase crystal reflects the later-stage quenching of H2O-bearing fluid likely in the transition zone, which has been trapped during the inclusion process in the lower mantle. Dehydration melting may be one of the key processes involved in transporting water across the boundary between the upper and lower mantle.
Abstract: An experimental study on diamond crystallization in CO2-rich sodium-carbonate melts has been undertaken at a pressure of 6.3 GPa in the temperature range of 1250-1570 °C and at 7.5 GPa in the temperature range of 1300-1700 °C. Sodium oxalate (Na2C2O4) was used as the starting material, which over the course of the experiment decomposed to form sodium carbonate, carbon dioxide and elemental carbon. The effects of pressure, temperature and dissolved CO2 in the ultra-alkaline carbonate melt on diamond crystallization, morphology, internal structure and defect-and-impurity content of diamond crystals are established. Diamond growth is found to proceed with formation of vicinal structures on the {100} and {111} faces, resulting eventually in the formation of rounded polyhedrons, whose shape is determined by the combination tetragon-trioctahedron, trigon-trioctahedron and cube faces. Spectroscopic studies reveal that the crystallized diamonds are characterized by specific infrared absorption and photoluminescence spectra. The defects responsible for the 1065 cm? 1 band dominating in the IR spectra and the 566 nm optical system dominating in the PL spectra are tentatively assigned to oxygen impurities in diamond.
Earth and Planetary Science Letters, Vol. 451, pp. 114-124.
Mantle
Subduction
Abstract: The elastic properties of two single crystals of majoritic garnet (Mg3.24Al1.53Si3.23O12 and Mg3.01Fe0.17Al1.68Si3.15O12), have been measured using simultaneously single-crystal X-ray diffraction and Brillouin spectroscopy in an externally heated diamond anvil cell with Ne as pressure transmitting medium at conditions up to ?30 GPa and ?600 K. This combination of techniques makes it possible to use the bulk modulus and unit-cell volume at each condition to calculate the absolute pressure, independently of secondary pressure calibrants. Substitution of the majorite component into pyrope garnet lowers both the bulk (KsKs) and shear modulus (G ). The substitution of Fe was found to cause a small but resolvable increase in KsKs that was accompanied by a decrease in ?Ks/?P?Ks/?P, the first pressure derivative of the bulk modulus. Fe substitution had no influence on either the shear modulus or its pressure derivative. The obtained elasticity data were used to derive a thermo-elastic model to describe VsVs and VpVp of complex garnet solid solutions. Using further elasticity data from the literature and thermodynamic models for mantle phase relations, velocities for mafic, harzburgitic and lherzolitic bulk compositions at the base of Earth's transition zone were calculated. The results show that VsVs predicted by seismic reference models are faster than those calculated for all three types of lithologies along a typical mantle adiabat within the bottom 150 km of the transition zone. The anomalously fast seismic shear velocities might be explained if laterally extensive sections of subducted harzburgite-rich slabs pile up at the base of the transition zone and lower average mantle temperatures within this depth range.
Abstract: The nature of crustal and lithospheric mantle evolution of the Archean shields as well as their subsequent deformation due to recent plate motions and sustained intraplate geodynamic activity, has been a subject of considerable interest. In view of this, about three decades ago, a new idea was put forward suggesting that out of all shield terrains, the Indian shield has an extremely thin lithosphere (?100 km, compared to 250-350 km, elsewhere), apart from being warm, non-rigid, sheared and deformed. As expected, it met with scepticism by heat flow and the emerging seismic tomographic study groups, who on the contrary suggested that the Indian shield has a cool crust, besides a coherent and thick lithosphere (as much as 300-400 km) like any other shield. However, recently obtained integrated geological and geophysical findings from deep scientific drillings in 1993 Killari (Mw: 6.3) and 1967 Koyna (Mw: 6.3) earthquake zones, as well as newly acquired geophysical data over other parts of Indian shield terrain, have provided a totally new insight to this debate. Beneath Killari, the basement was found consisting of high density, high velocity mid crustal amphibolite to granulite facies rocks due to exhumation of the deeper crustal layers and sustained granitic upper crustal erosion. Similar type of basement appears to be present in Koyna region too, which is characterized by considerably high upper crustal temperatures. Since, such type of crust is depleted in radiogenic elements, it resulted into lowering of heat flow at the surface, increase in heat flow contribution from the mantle, and upwarping of the lithosphere-asthenosphere boundary. Consequently, the Indian shield lithosphere has become unusually thin and warm. This study highlights the need of an integrated geological, geochemical and geophysical approach in order to accurately determine deep crust-mantle thermal regime in continental areas.
International Geology Review, Vol. 58, 12, pp. 1461-1480.
India
Carbonatite
Abstract: The South Indian Granulite Terrane (SGT) is a collage of Archaean to Neoproterozoic age granulite facies blocks that are sutured by an anastomosing network of large-scale shear systems. Besides several Neoproterozoic carbonatite complexes emplaced within the Archaean granulites, there are also smaller Paleoproterozoic (2.4 Ga, Hogenakkal) carbonatite intrusions within two NE-trending pyroxenite dikes. The Hogenakkal carbonatites, further discriminated into sövite and silicate sövite, have high Sr and Ba contents and extreme light rare earth element (LREE) enrichment with steep slopes typical of carbonatites. The C- and O-isotopic ratios [?13CVPDB = ?6.7 to ?5.8‰ and ?18OVSMOW = 7.5-8.7‰ except a single 18O-enriched sample (?18O = 20.0‰)] represent unmodified mantle compositions. The ?Nd values indicate two groupings for the Hogenakkal carbonatites; most samples show positive ?Nd values, close to CHUR (?Nd = ?0.35 to 2.94) and named high-?Nd group while the low-?Nd group samples show negative values (?5.69 to ?8.86), corresponding to depleted and enriched source components, respectively. The 87Sr/86Sri ratios of the two groups also can be distinguished: the high-?Nd ones have low 87Sr/86Sri ratios (0.70161-0.70244) while the low-?Nd group shows higher ratios (0.70247-0.70319). We consider the Nd-Sr ratios as primary and infer derivation from a heterogeneous mantle source. The emplacement of the Hogenakkal carbonatites may be related to Paleoproterozoic plume induced large-scale rifting and fracturing related to initiation of break-up of the Neoarchean supercontinent Kenorland.
Abstract: T-shaped orogenic triple junctions between mobile belts usually form in two unrelated stages by subsequent and oblique continental collisions separated by a significant time span. Besides these "oblique triple junctions", another type, named "transverse triple junctions", may exist. Such junctions are created by a more complex mechanism of partly contemporaneous convergence of three cratons in a restricted time frame, involving strike slip. The Neoproterozoic-Cambrian Kaoko-Damara junction between the Rio de la Plata, Congo, and Kalahari cratons in Namibia is an example of such a transverse orogenic triple junction, formed by at least four subsequent but partly related deformation events. Initial north-south convergence between the Congo and Kalahari cratons was followed by east-west collision of the Rio de la Plata and Congo cratons. Subsequently, the Kalahari and Congo cratons collided, contemporaneous with sinistral strike-slip motion between the Congo and Rio de la Plata cratons and with the intrusion of large granite-syenite plutons, probably associated with slab detachment aided by the strike-slip movement. Other examples of transverse triple junctions may exist in Gondwana. Transcurrent shear zones, some possibly nucleated on transform faults from the pre-collision setting, are essential for the formation of transverse triple junctions.
Canadian Journal of Earth Sciences, Vol. 52, 1, pp. 51-67.
Canada, Alberta
Deposit - Buffalo Head Hills
Abstract: Ice flow of the last glaciation in the Buffalo Head Hills kimberlite field of northern Alberta is reconstructed from landform interpretations and clast orientations for the purpose of aiding kimberlite exploration in the region. The paucity of bedrock outcrop and the absence of preserved striae and other erosional ice-flow indicators on the soft Cretaceous marine sediments inhibit detailed interpretations on glacial flow chronology. Poorly developed bedrock drumlins on the Buffalo Head Hills and erosional ice-flow indicators preserved on the kimberlite outcrops indicate southwestward ice flow during the maximum extent of ice during the last glaciation. During the deglaciation of northern Alberta, later phases of ice flow were controlled by lobes of surging ice, which surged into proglacial lakes. West of the Buffalo Head Hills, the maximum phase of southwest flow was followed by southeastward ice movement of the Peace River ice lobe. Similarly, east of the Buffalo Head Hills, the maximum phase of ice flow was superceded by a south-southwest ice advance of the Wasbasca ice lobe.
Abstract: The southeast Mojave Desert hosts one of the world’s largest rare earth element (REE) deposits at Mountain Pass, California. Although surface geology has been studied, a full understanding of the carbonatite and associated intrusive suite complex requires subsurface geophysical characterization. In this study, a combination of geophysical methods, including magnetotelluric (MT), magnetics, and gravity are used to create a two-dimensional (2D) geophysical model to a depth of about 10 km. An electrically conductive body is found 2-3 km below and west of the deposit that is associated with a magnetic high that could be connected to a deeper (10 km) conductive body related to possible intrusions or hydrothermal systems. The carbonatite body coincides with a steep magnetic gradient and a bench or terrace in the gravity data that may reflect relative lower-density intrusive rocks. Although carbonatite rocks are typically magnetic, the carbonatite rocks, associated intrusive suite, and host rocks in this area are essentially non-magnetic. Combined geophysical data indicate that the enriched REE deposit may be related to a regional extensive hydrothermal alteration event.
Abstract: Fluids are now thought to be the growth medium for most diamonds sampled from the base of the lithosphere. Fluids trapped in fast-growing, fluid-rich diamonds provide the only direct view of this growth medium and provide valuable information on the geochemistry of deep mantle fluids in general. The most common fluids within fluid-rich diamonds are those belonging to the low- and high-Mg carbonatite affinity as well as more Si-rich variants. A sub-class of fluids that are very rich in alkalis and Cl, known as “saline” fluids, have been found but are generally scarce. At both Ekati and Diavik saline fluids appear much more common and provide a unique insight into their origin. We describe a novel sampling method that allows the analysis of the trace element and radiogenic isotope composition of diamonds (both gem and fluid-rich). Using these methods we analyzed 11 diamonds from the Fox kimberlite in the Ekati kimberlite cluster. The diamonds containing saline fluids are solely associated with peridotite on the basis of their micro-mineral inclusions. Silicic fluid compositions are related exclusively to eclogitic inclusions. Striking differences between the two fluid compositions are the positive Eu and Sr anomalies within saline fluids versus no anomalies in the silicic fluids. These characteristics are identical to previously studied fluids in fibrous diamonds from neighbouring kimberlites in Ekati and Diavik, which also contains diamonds carrying high- and low-Mg carbonatitic fluids. Combining the data, we show a clear chemical evolutionary trend, identifying for the first time saline fluids as parental to silicic and carbonatitic deep mantle melts, via fluid-rock interaction in the Slave CLM. Moreover, the trace-element and Sr isotopic fingerprints of subducting slabs and the timing of host diamond formation suggest that a subducting plate under western North America is the source of the saline fluids, which controlled metasomatism in the Slave lithosphere prior to Mesozoic kimberlite eruption. Saline fluids can be documented as a metasomatic product interacting with the lithosphere above shallow-subducting slabs such as the Farallon slab. As such they appear to be key players in the enrichment of the base of the lithosphere and the formation of diamonds.
Abstract: Fluids are now thought to be the growth medium for most diamonds sampled from the base of the lithosphere. Fluids trapped in fast-growing, fluid-rich diamonds provide the only direct view of this growth medium and provide valuable information on the geochemistry of deep mantle fluids in general. The most common fluids within fluid-rich diamonds are those belonging to the low- and high-Mg carbonatite affinity as well as more Si-rich variants. A sub-class of fluids that are very rich in alkalis and Cl, known as “saline” fluids, have been found but are generally scarce. At both Ekati and Diavik saline fluids appear much more common and provide a unique insight into their origin. We describe a novel sampling method that allows the analysis of the trace element and radiogenic isotope composition of diamonds (both gem and fluid-rich). Using these methods we analyzed 11 diamonds from the Fox kimberlite in the Ekati kimberlite cluster. The diamonds containing saline fluids are solely associated with peridotite on the basis of their micro-mineral inclusions. Silicic fluid compositions are related exclusively to eclogitic inclusions. Striking differences between the two fluid compositions are the positive Eu and Sr anomalies within saline fluids versus no anomalies in the silicic fluids. These characteristics are identical to previously studied fluids in fibrous diamonds from neighbouring kimberlites in Ekati and Diavik, which also contains diamonds carrying high- and low-Mg carbonatitic fluids. Combining the data, we show a clear chemical evolutionary trend, identifying for the first time saline fluids as parental to silicic and carbonatitic deep mantle melts, via fluid-rock interaction in the Slave CLM. Moreover, the trace-element and Sr isotopic fingerprints of subducting slabs and the timing of host diamond formation suggest that a subducting plate under western North America is the source of the saline fluids, which controlled metasomatism in the Slave lithosphere prior to Mesozoic kimberlite eruption. Saline fluids can be documented as a metasomatic product interacting with the lithosphere above shallow-subducting slabs such as the Farallon slab. As such they appear to be key players in the enrichment of the base of the lithosphere and the formation of diamonds.
Geological Society of London Special Publication Supercontinent Cycles through Earth History., Vol. 424, pp. 83-94.
United States, Canada
Supercontinents
Abstract: The link between observed episodicity in ore deposit formation and preservation and the supercontinent cycle is well established, but this general framework has not, however, been able to explain a lack of deposits associated with some accretionary orogens during specific periods of Earth history. Here we show that there are intriguing correlations between styles of orogenesis and specific mineral deposit types, in the context of the Nuna supercontinent cycle. Using animated global reconstructions of Nuna's assembly and initial breakup, and integrating extensive databases of mineral deposits, stratigraphy, geochronology and palaeomagnetism we are able to assess spatial patterns of deposit formation and preservation. We find that lode gold, volcanic-hosted-massive-sulphide and nickel-copper deposits peak during closure of Nuna's interior ocean but decline during subsequent peripheral orogenesis, suggesting that accretionary style is also important. Deposits such as intrusion-related gold, carbonate-hosted lead-zinc and unconformity uranium deposits are associated with the post-assembly, peripheral orogenic phase. These observations imply that the use of plate reconstructions to assess orogenic style, although challenging for the Precambrian, can be a powerful tool for mineral exploration targeting.
Earth and Planetary Science Letters, Vol. 433, pp. 360-369.
Mantle
Geophysics - seismics
Abstract: In regions of the mantle where multi-phases coexist like at the olivine-wadsleyite-ringwoodite transitions, the stress induced by the seismic waves may drive a mineralogical reaction between the low to high pressure phases, a possible source of dissipation. In such a situation, the amount of attenuation critically depends on the timescale for the phase transformations to reach equilibrium relative to the period of the seismic wave. Here we report synchrotron-based measurements of the kinetics of the olivine to ringwoodite transformation at pressure-temperature conditions of the co-stability loop, for iron-rich olivine compositions. Both microstructural and kinetic data suggest that the transformation rates are controlled by growth processes after the early saturation of nucleation sites along olivine grain boundaries. Transformation-time data show an increase of reaction rates with temperature and iron content, and have been fitted to a rate equation for interface-controlled transformation: G=k0?T?exp?[n?XFa]?exp?[?(?Ha+PV?)/RT]×[1?exp?(?Gr/RT)]G=k0?T?exp?[n?XFa]?exp?[?(?Ha+PV?)/RT]×[1?exp?(?Gr/RT)], where XFaXFa is the fayalite fraction, the exponential factor n=9.7n=9.7, View the MathML sourceln?k0=?9.1 ms?1. View the MathML sourceXFa?1 and ?Ha=199 kJ/mol?Ha=199 kJ/mol, assuming V?=0 cm3/molV?=0 cm3/mol. Including these new kinetic results in a micro-mechanical model of a two-phase loop (Ricard et al., 2009), we predict View the MathML sourceQK?1 and View the MathML sourceQ??1 significantly higher than the PREM values for both body waves and normal modes. This attests that the olivine-wadsleyite transition can significantly contribute to the attenuation of the Earth's mantle transition zone.
Journal of Metamorphic Geology, in press available, 44p.
Europe, Bulgaria
Gneiss - diamonds
Abstract: Evidence for ultrahigh-pressure metamorphism (UHPM) in the Rhodope Metamorphic Complex comes from occurrence of diamond in pelitic gneisses, variably overprinted by granulite facies metamorphism, known from several areas of the Rhodopes. However, tectonic setting and timing of UHPM are not interpreted unanimously. Linking age to metamorphic stage is a prerequisite for reconstruction of these processes. Here we use monazite in diamond-bearing gneiss from Chepelare (Bulgaria) to date the diamond-forming UHPM event in the Central Rhodopes. The diamond-bearing gneiss comes from a strongly deformed, lithologically heterogeneous zone (Chepelare Mélange) sandwiched between two migmatized orthogneiss units, known as Arda-I and Arda-II. Diamond, identified by Raman micro-spectroscopy, shows the characteristic band mostly centred between 1332 and 1330 cm?1. The microdiamond occurs as single grains or polyphase diamond + carbonate inclusions, rarely with CO2. Thermodynamic modelling shows that garnet was stable at UHP conditions of 3.5-4.6 GPa and 700-800 °C, in the stability field of diamond, and was re-equilibrated at granulite facies/partial melting conditions of 0.8-1.2 GPa and 750-800 °C. The texture of monazite shows older central parts and extensive younger domains which formed due to metasomatic replacement in solid residue and/or overgrowth in melt domains. The monazite core compositions, with distinctly lower Y, Th and U contents, suggest its formation in equilibrium with garnet. The U-Th-Pb dating of monazite using electron microprobe analysis yielded a c. 200 Ma age for the older cores with low Th, Y, U and high La/Nd ratio, and a c. 160 Ma age for the dominant younger monazite enriched in Th, Y, U and HREE. The older age of around 200 Ma is interpreted as the timing of UHPM whereas the younger age of around 160 Ma as granulite facies/partial melting overprint. Our results suggest that UHPM occurred in Late Triassic to Early Jurassic time, in the framework of collision and subduction of continental crust after the closure of Palaeotethys.
Petrik, I., Janak, M., Froitzheim, N., Georgiev, N., Yoshida, K., Sasinkova, V., Konecny, P., Milovska, S.
Triassic to Early Jurassic ( c. 200Ma) UHP metamorphism in the Central Rhodopes: evidence from U-Pb dating of monazite in diamond bearing gneiss from Chepelare ( Bulgaria).
Journal of Metamorphic Geology, Vol. 34, 3, pp. 265-291.
Petrik, I., Janak, M., Froitzheim, N., Georgiev, N., Yoshida, K., Sasinkova, V., Konecny, P., Milovska, S.
Triassic to Early Jurassic ( c. 200Ma) UHP metamorphism in the central Rhodopes: evidence from U-Pb-Th dating of monazite in diamond bearing gneiss from Chepelare Bulgaria.
Journal of Metamorphic Geology, Vol. 34, 3, pp. 265-291.
Contributions to Mineralogy and Petrology, Vol. 171, 15p.
Canada, Northwest Territories
Deposit - Diavik
Abstract: Fibrous diamonds are often interpreted as direct precipitates of primary carbonate-bearing fluids in the lithospheric mantle, sourced directly from common reservoirs of “mantle” carbon and nitrogen. Here we have examined fibrous growth layers in five diamonds (as three rims or “coats” and two whole-crystal cuboids) from the Diavik Diamond Mine, Canada, using in situ C- and N-isotope and N-abundance measurements to investigate the origin and evolution of their parental fluids, and in particular, to test for isotopic variability within a suite of fibrous diamonds. High-resolution growth structure information was gleaned from cathodoluminescence (CL) imaging and, in combination with the isotopic data, was used to assess the nature of the transition from gem to fibrous growth in the coated diamonds. The two cuboids are characterized by fine concentric bands of fibrous and/or milky opaque diamond, with one sample (S1719) having intermittent gem-like growth layers that are transparent and colourless. The three coated diamonds comprise octahedral gem cores mantled by massive or weakly zoned fibrous rims, with sharp and well-defined gem-fibrous boundaries. For the two cuboid samples, ? 13C and ? 15N values were ?7.7 to ?3.2 ‰ (mean ?6.3 ± 1.3 ‰; 1 SD; n = 84) and ?5.6 to ?2.1 ‰ (mean ?4.0 ± 0.8 ‰; 1 SD; n = 48), respectively. The three fibrous rims have combined ? 13C values of ?8.3 to ?4.8 ‰ (mean ?6.9 ± 0.7 ‰; 1 SD; n = 113) and ? 15N values of ?3.8 to ?1.9 ‰ (mean ?2.7 ± 0.4 ‰; 1 SD; n = 43). N-abundances of the combined cuboid-fibrous rim dataset range from 339 to 1714 at. ppm. The gem cores have ? 13C and ? 15N values of ?5.4 to ?3.5 ‰ and ?17.7 to +4.5 ‰, respectively, and N-abundances of 480 to 1699 at. ppm. Broadly uniform C- and N-isotope compositions were observed in each of the gem cores (variations of ~<1 ‰ for carbon and ~<3 ‰ for nitrogen). This limited C- and N- isotope variability implies that the gem cores formed from separate pulses of fluid that remained isotopically uniform throughout the duration of growth. Significant isotopic and abundance differences were observed between the gem and fibrous growth zones, including in one detailed isotopic profile ? 13C and ? 15N offsets of ~?2.4 and ~?3.7 ‰, respectively, and a ~230 at. ppm increase in N-abundance. Combined with the well-defined gem-fibrous boundaries in plane light and CL, these sharp isotopic differences indicate separate parental fluid histories. Notably, in the combined fibrous diamond dataset prominent C- and N-isotope differences between the whole-crystal cuboid and fibrous rim data were observed, including a consistent ~1.3 ‰ offset in ? 15N values between the two growth types. This bimodal N-isotope distribution is interpreted as formation from separate parental fluids, associated with distinct nitrogen sources. The bimodal N-isotope distribution could also be explained by differences in N-speciation between the respective parental fluids, which would largely be controlled by the oxidation state of the fibrous rim and cuboid growth environments (i.e., N2 vs. NH4 + or NH3). We also note that this C- and N-isotope variability could indicate temporal changes to the source(s) of the respective parental fluids, such that each stage of fibrous diamond growth reflects the emplacement of separate pulses of proto-kimberlitic fluid—from distinct carbon and nitrogen sources, and/or with varying N-species—into the lithospheric mantle.
Mineralogical Association of Canada, Special Publications no. 12, 272p. ISBN 978-0-921294-58-0 approx. 70.00
Gem minerals
Abstract: Gemstones have fascinated people for thousands of years because of their beauty, rarity, and monetary value. However, a true understanding of gemstones and their properties has only come about in the past two centuries resulting from the developing science of geology and mineralogy and an increasing need to distinguish natural gemstones from those that are treated or grown in the laboratory. Numerous books describe minerals, and a number of them report on the distinctive properties of gemstones, but there are almost no books that present a more detailed mineralogical description of the gem minerals, along with a clear explanation of basic concepts of interest from both mineralogy and geology.
Abstract: One of the most controversial diamond types is carbonado, as its origin and geological history are still under debate. Here, we investigate selected carbonado samples using neutron diffraction and high resolution orientation mapping in combination with numerical simulations. Neutron diffraction analyses show that fine grained carbonado samples exhibit a distinct lack of crystallographic preferred orientation. Quantitative crystallographic orientation analyses performed on transmission electron microscope (TEM) sections reveal that the 2-10 ?m grains exhibit locally significant internal deformation. Such features are consistent with crystal plastic deformation of a grain aggregate that initially formed by rapid nucleation, characterized by a high number of nucleation sites and no crystallographic preferred orientation. Crystal plastic deformation resulted in high stress heterogeneities close to grain boundaries, even at low bulk strains, inducing a high degree of lattice distortion without significant grain size reduction and the development of a crystallographic preferred orientation. Observed differences in the character of the grain boundary network and internal deformation structures can be explained by significant post-deformation annealing occurring to variable degrees in the carbonado samples. Differences in intensity of crystal bending and subgrain boundary sharpness can be explained by dislocation annihilation and rearrangement, respectively. During annealing grain energy is reduced resulting in distinct changes to the grain boundary geometry. Grain scale numerical modelling shows that anisotropic grain growth, where grain boundary energy is determined by the orientation of a boundary segment relative to the crystallographic orientation of adjacent grains results in straight boundary segments with abrupt changes in orientation even if the boundary is occurring between two triple junctions forming a "zigzag" pattern. In addition, in diamond anisotropic grain growth results in triple junctions that rarely show 120° angles. Our results support the interpretation that carbonados may have undergone at least 2 or 3 stages of development with rapid nucleation, crystal plastic deformation to low strains and variable degrees of post-deformation annealing. Such a history is commonly observed in Earth's crustal or mantle rocks. Hence, for carbonados it is not necessary to invoke an extraordinary and/or extraterrestrial origin and history. The combination of methods utilized here, promises to help advance our understanding of diamond and diamond aggregates in the future.
Abstract: We present major and trace element data on coexisting garnet and clinopyroxene from experiments carried out between 1.3 and 10 GPa and 970 and 1400 °C. We demonstrate that the lattice strain model, which was developed for applications to mineral-melt partitioning, can be adapted to garnet-clinopyroxene partitioning. Using new and published experimental data we develop a geothermometer for coexisting garnet and clinopyroxene using the concentration of rare earth elements (REE). The thermometer, which is based on an extension of the lattice strain model, exploits the tendency of minerals at elevated temperatures to be less discriminating against cations that are too large or too small for lattice sites. The extent of discrimination against misfit cations is also related to the apparent elasticity of the lattice site on which substitution occurs, in this case the greater stiffness of the dodecahedral X-site in garnet compared with the eightfold M2-site in clinopyroxene. We demonstrate that the ratio of REE in clinopyroxene to that in coexisting garnet is particularly sensitive to temperature. We present a method whereby knowledge of the major and REE chemistry of garnet and clinopyroxene can be used to solve for the equilibrium temperature. The method is applicable to any scenario in which the two minerals are in equilibrium, both above and below the solidus, and where the mole fraction of grossular in garnet is less than 0.4. Our method, which can be widely applied to both peridotitic and eclogitic paragenesis with particular potential for diamond exploration studies, has the advantage over commonly used Fe-Mg exchange thermometers in having a higher closure temperature because of slow interdiffusion of REE. The uncertainty in the calculated temperatures, based on the experimental data set, is less than ±80 °C.
Proceedings of National Academy of Science USA, Vol. 113, 40, pp. 11127-11130.
Mantle
Iron
Abstract: We performed laser-heated diamond anvil cell experiments combined with state-of-the-art electron microanalysis (focused ion beam and aberration-corrected transmission electron microscopy) to study the distribution and valence of iron in Earth’s lower mantle as a function of depth and composition. Our data reconcile the apparently discrepant existing dataset, by clarifying the effects of spin (high/low) and valence (ferrous/ferric) states on iron partitioning in the deep mantle. In aluminum-bearing compositions relevant to Earth’s mantle, iron concentration in silicates drops above 70 GPa before increasing up to 110 GPa with a minimum at 85 GPa; it then dramatically drops in the postperovskite stability field above 116 GPa. This compositional variation should strengthen the lowermost mantle between 1,800 km depth and 2,000 km depth, and weaken it between 2,000 km depth and the D” layer. The succession of layers could dynamically decouple the mantle above 2,000 km from the lowermost mantle, and provide a rheological basis for the stabilization and nonentrainment of large low-shear-velocity provinces below that depth.
Abstract: The sedimentary cover of the North American craton preserved little evidence of the Paleozoic tectonic events that shaped the Appalachian orogen on its eastern side. A notable exception is the NNW-trending Hudson Bay central high, which corresponds to a normal-fault array extending for a minimum length of 500 km. A working hypothesis is proposed in which stresses applied to the continental margin during the Silurian earliest Devonian Salinian orogeny were transmitted over a distance of >1400 km in the continental interior, where they induced the normal-fault reactivation of older structural discontinuities. The shutdown of tectonic activity along the Hudson Bay central high during the latest Early Devonian to earliest Middle Devonian is interpreted as resulting from a change in the direction of plate convergence during the Acadian orogeny.
GAC MAC Meeting Special Session SS11: Cratons, kimberlites and diamonds., abstract 1/4p.
Canada, Northwest Territories
Diamond indicators
Abstract: The Central Mackenzie Valley (CMV) area of the Northwest Territories (NWT) comprises a Phanerozoic sedimentary basin that lies between the western margin of the Slave craton and the Cordillera. Although the region is considerably outside the bounds of the exposed Slave craton, both LITHOPROBE and more recent regional-scale surface wave studies (e.g., Priestley and McKenzie, 2006) indicate the likely presence of lithospheric mantle extending into the diamond stability field. Recent work conducted by Olivut Resources Ltd. led to the discovery of 29 kimberlites in the CMV. However, the indicator mineral chemistry of discovered kimberlites does not appear to be a good match (www.olivut.ca) with those during regional till and stream sediment sampling by the Geologic Survey of Canada (GSC) and Northwest Territories Geologic Survey (NTGS) in August 2003 and July 2005. We present new geochemical data on the regional indicator minerals with the aim of obtaining geotherm and depth of mantle sampling constraints on those indicator minerals discovered to date. A statistical evaluation of the data will compare the similarities to indicator mineral chemistry with parts of the Slave craton to evaluate whether the CMV indicators may ultimately be derived from that region. In total 3600 kimberlite indicator mineral grains were picked from the 0.25-2.0 mm size fractions. Peridotitic garnet grains dominate (46%), followed by magnesium ilmenite (26%), with decreasing individual proportions >15% of chromite, low-chrome diopside, olivine, chrome-diopside and eclogitic garnet. A sub-sample of these grains (3143) were analysed by EPMA. Garnet grains classify (after Grütter et al., 2004) as 1015 (62.1%) G9, 270 (16.5%) G11, 113 (6.9%) G10, 103 (6.3%) G12, 57 (3.5%) G1, 46 (2.8%) G10D, and the remaining 31 (1.9%) as G0, G3, G3D, G4, and G5. A sub-set of garnet grains (~700) were selected for LA-ICP-MS trace element analysis. Of the grains selected 74% G9, 14% G10 (and G10D), and 8% G11, with only 4% G12 and G0 (Grütter et al., 2004). Nickel concentrations from these grains range from 2.6-168.2 ppm, with the majority (>80%) between 20-100 ppm, yielding TNi (Canil, 1999) values ranging from 643-1348°C, with the majority between ~1000-1200°C. Using a central Slave craton geothermal gradient (Hasterok and Chapman, 2011), equilibration pressures for these garnet grains range from 20-80 kbars with the majority between 40-60 kbars (120-185 km). Preliminary analysis has 581 (81%) of the erupted peridotitic mantle garnet grains plotting within the diamond stability field (Kennedy and Kennedy, 1976). Of the 128 clinopyroxene grains analysed, only a few represent garnet peridotite (lherzolite) facies KIM clinopyroxene grains following compositional screening. Thermobarometry of these grains (Nimis and Taylor, 2000), assuming they were all derived from the same lithospheric section, yields P-T arrays identical to the central Slave geotherm that was 220 km thick at the time of eruption. These results are encouraging for diamond exploration. We thank Overburden Drilling Management Ltd. for grain picking and recovery of the small diamond, SGS Lakefield Research for mounting grains, and the GSC for probing of the grains.
Abstract: Rare earth element (REE) ore-bearing carbonatite dikes and a stock at Mountain Pass, California, are spatially associated with a suite of ultrapotassic plutonic rocks, and it has been proposed that the two are genetically related. This hypothesis is problematic, given that existing geochronological constraints indicate that the carbonatite is ?15-25 Myr younger than the ultrapotassic rocks, requiring alternative models for the formation of the REE ore-bearing carbonatite during a separate event and/or via a different mechanism. New laser ablation split-stream inductively coupled plasma mass spectrometry (LASS-ICP-MS) petrochronological data from ultrapotassic intrusive rocks from Mountain Pass yield titanite and zircon U-Pb dates from 1429?±?10 to 1385?±?18?Ma, expanding the age range of the ultrapotassic rocks in the complex by ?20 Myr. The ages of the youngest ultrapotassic rocks overlap monazite Th-Pb ages from a carbonatite dike and the main carbonatite ore body (1396?±?16 and 1371?±?10?Ma, respectively). The Hf isotope compositions of zircon in the ultrapotassic rocks are uniform, both within and between samples, with a weighted mean ?Hfi of 1•9?±?0•2 (MSWD?=?0•9), indicating derivation from a common, isotopically homogeneous source. In contrast, in situ Nd isotopic data for titanite in the ultrapotassic rocks are variable (?Ndi?=?-3•5 to -12), suggesting variable contamination by an isotopically enriched source. The most primitive ?Ndi isotopic signatures, however, do overlap ?Ndi from monazite (?Ndi?=?-2•8?±?0•2) and bastnäsite (?Ndi?=?-3•2?±?0•3) in the ore-bearing carbonatite, suggesting derivation from a common source. The data presented here indicate that ultrapotassic magmatism occurred in up to three phases at Mountain Pass (?1425, ?1405, and ?1380?Ma). The latter two stages were coeval with carbonatite magmatism, revealing previously unrecognized synchronicity in ultrapotassic and carbonatite magmatism at Mountain Pass. Despite this temporal overlap, major and trace element geochemical data are inconsistent with derivation of the carbonatite and ultrapotassic rocks by liquid immiscibility or fractional crystallization from common parental magma. Instead, we propose that the carbonatite was generated as a primary melt from the same source as the ultrapotassic rocks, and that although it is unique, the Mountain Pass ultrapotassic and carbonatite suite is broadly similar to other alkaline silicate-carbonatite occurrences in which the two rock types were generated as separate mantle melts.
Progress in Earth and Planetary Science, Vol. 3, 18p.
Mantle
Carbonatite
Abstract: Current knowledge on the solidus temperature for carbonated eclogites suggests that carbonatitic liquids should not form from a subducted oceanic lithosphere at sub-arc depth. However, the oceanic crust includes a range of gabbroic rocks, altered on rifts and transforms, with large amounts of anorthite-rich plagioclase forming epidote on metamorphism. Epidote disappearance with pressure depends on the normative anorthite content of the bulk composition; we therefore expect that altered gabbros might display a much wider pressure range where epidote persists, potentially affecting the solidus relationships. A set of experimental data up to 4.6 GPa, and 1000 °C, including new syntheses on mafic eclogites with 36.8 % normative anorthite, is discussed to unravel the effect of variable bulk and volatile compositions in model eclogites, enriched in the normative anorthite component (An 37 and An 45). Experiments are performed in piston cylinder and multianvil machines. Garnet, clinopyroxene, and coesite form in all syntheses. Lawsonite was found to persist at 3.7 GPa, 750 °C, with both dolomite and magnesite; at 3.8 GPa, 775-800 °C, fluid-saturated conditions, epidote coexists with kyanite, dolomite, and magnesite. The anhydrous assemblage garnet, omphacite, aragonite, and kyanite is found at 4.2 GPa, 850 °C. At 900 °C, a silicate glass of granitoid composition, a carbonatitic precipitate, and Na-carbonate are observed. Precipitates are interpreted as evidence of hydrous carbonatitic liquids at run conditions; these liquids produced are richer in Ca compared to experimental carbonatites from anhydrous experiments, consistently with the dramatic role of H2O in depressing the solidus temperature for CaCO3. The fluid-absent melting of the assemblage epidote + dolomite, enlarged in its pressure stability for An-rich gabbros, is expected to promote the generation of carbonatitic liquids. The subsolidus breakdown of epidote in the presence of carbonates at depths exceeding 120 km provides a major source of C-O-H volatiles at sub-arc depth. In warm subduction zones, the possibility of extracting carbonatitic liquids from a variety of gabbroic rocks and epidosites offers new scenarios on the metasomatic processes in the lithospheric wedge of subduction zones and a new mechanism for recycling carbon.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 28p.
Africa, Botswana
Deposit - Orapa
Abstract: Commencing with the Pre-Feasibility Study (PFS) conclusions, the Orapa 3 process design evolved through a phase of value-engineering studies. An overall re-evaluation of the originally proposed process design was necessary both in order to address the interim increase in target throughput from 9.8 Mtpa to 12 Mtpa as well as to increase capital efficiency. In the interests of clarity, the PFS process design for Orapa 3 has been omitted from this paper, as it is no longer relevant. Recognition is however due to those engaged in earlier phases of the Orapa 3 project with respect to fundamental mass~balancing modelling; and ore and diamond characterisation, which fanned the basis for the process design that has evolved from feasibility study activities. The background context for Orapa 3 is of an operation expected to yield operating utilisation and revenue improvements relative to the Orapa 2 operation. Delivering these without undue penalties to capital and operating cost required a shift in thinking, trading excess installed capacity for flexible circuit configuration. The process design adopted is "layered", with the purpose of preserving Run Of Mine (ROM) throughput by reducing in-circuit arisings - particularly to the Dense Medium Separation (DMS) section - rather than simply installing additional DMS capacity on the expectation of low DMS availability. Elsewhere, the ability to monitor and maintain critical sizing activities - particularly desanding - without impact on overall plant throughput is intended to motivate operators to avoid the temptation to trade quality for quantity. At present, since an overall dynamic simulation of the Orapa 3 operation has still to be carried out, the design mass balance has been based on a relatively onerous combination of worst case feed type with 100% front-line process capacity in all plant sections. This means that, whilst the installed DMS capacity is based on routing 100% of sized scrubbing section product directly to the DMS, and with one DMS module always unavailable, the High Pressure Rolls Crushing (HPRC) capacity is based on allowing for 50% of this stream to be instead routed first to the HPRC section, at no more than 75% of maximum roll speed for the two units installed. This is an obvious "belt and braces" approach. Following the dynamic simulation exercise (currently in progress), it is likely that a less conservative approach will be taken. This will not affect the conceptual design of the process plant, being mostly an exercise in refining the number of DMS modules to be installed, and possibly reducing slightly the size of the HPRC roll units. Both of these will have positive capital and operating cost impacts. Page 215 The Southern African Institute of Mining and Metallurgy Diamonds - Source to Use 2010 G Popp/ewell andB Hae/else DMS capacity, despite being split into coarse and fiaes streams, consists of identical modules. Two of the nine modules are set-up to receive either coarse or fine feed, the only difference being that fines modules are rated at lower capacity than the same modules treating coarse feed. Final recovery section capacity is based on entirely wet primary diamond recovery technology. This greatly reduces both the cost of drying. a large amount of recovery section feed and the dust• management issues associated with dry recovery technology. In contrast to the Orapa 2 operations, a scavenginglauditgrease belt section is included as a diamond recovery "goal-keeper" and to provide a process assurance function.
Geophysical Research Letters, Vol. 43, 1, pp. 144-153.
United States
Geophysics - gradiometry
Abstract: In order to better understand the tectonic evolution of the North American continent, we utilize data from the EarthScope Transportable Array network to calculate a three-dimensional shear velocity model for the continental United States. This model was produced through the inversion of Rayleigh wave phase velocities calculated using ambient noise tomography and wave gradiometry, which allows for sensitivity to a broad depth range. Shear velocities within this model highlight the influence of orogenic and postorogenic events on the evolution of the lithosphere. Most notable is the contrast in crustal and upper mantle structure between the relatively slow western and relatively fast eastern North America. These differences are unlikely to stem solely from thermal variations within the lithosphere and highlight both the complexities in lithospheric structure across the continental U.S. and the varying impacts that orogeny can have on the crust and upper mantle.
Abstract: The Smithsonian’s National Gem Collection includes the Hope Diamond and an assortment of other significant fancy-colored diamonds, providing a unique opportunity to conduct detailed and sustained studies on an unprecedented selection of these rare and valuable stones. We present an overview and recent results from our work on pink, blue and chameleon diamonds. Boron causes the blue color of the Hope Diamond and other type IIb diamonds, but scarcity, high value, and the low concentration of B has inhibited B analyses of natural IIb diamonds. We used FTIR and ToF-SIMS to measure concentrations and distributions of B in the Hope and other blue diamonds. ToF-SIMS analyses gave spot B concentrations as high as 8.4 ± 1.1 ppm for the Hope Diamond to less than 0.08 ppm in other blue diamonds and revealed strong zoning of B in some diamonds, which was confirmed by mapping using synchrotron FTIR. Boron is also responsible for the phosphorescence emissions of IIb diamonds, at 660 nm and 500 nm; the emissions are likely caused by donor-acceptor pair recombination processes involving B and other defects. Approximately 50 type I natural pink diamonds were compared using UV-Vis, FTIR, and CL spectroscopies. All stones exhibit pink color zoning, ~1µm thick [111] lamellae, in otherwise colorless diamond. The pink diamonds fall into two groups: 1) those from Argyle in Australia and Santa Elena in Venezuela, and 2) those from other localities. TEM imaging from FIB sections revealed that twinning is the likely mechanism by which plastic deformation is accommodated for the pink diamonds. The deformation creates new centers, including the one responsible for the pink color, which remains unidentified. The differences in the plastic deformation features for the two groups might correlate to the particular geologic conditions under which the diamonds formed. Fluorescence and thermoluminescence experiments on natural chameleon diamonds reveal that an emission band, peaking near 556nm, may be stimulated via a number of different mechanisms. We discuss the implications of our observations for the electronic structure of the 556nm-fluorescing defect center, and the connections to the unidentified color center responsible for chameleon color changes.
Abstract: The Smithsonian’s National Gem Collection includes the Hope Diamond and an assortment of other significant fancy-colored diamonds, providing a unique opportunity to conduct detailed and sustained studies on an unprecedented selection of these rare and valuable stones. We present an overview and recent results from our work on pink, blue and chameleon diamonds. Boron causes the blue color of the Hope Diamond and other type IIb diamonds, but scarcity, high value, and the low concentration of B has inhibited B analyses of natural IIb diamonds. We used FTIR and ToF-SIMS to measure concentrations and distributions of B in the Hope and other blue diamonds. ToF-SIMS analyses gave spot B concentrations as high as 8.4 ± 1.1 ppm for the Hope Diamond to less than 0.08 ppm in other blue diamonds and revealed strong zoning of B in some diamonds, which was confirmed by mapping using synchrotron FTIR. Boron is also responsible for the phosphorescence emissions of IIb diamonds, at 660 nm and 500 nm; the emissions are likely caused by donor-acceptor pair recombination processes involving B and other defects. Approximately 50 type I natural pink diamonds were compared using UV-Vis, FTIR, and CL spectroscopies. All stones exhibit pink color zoning, ~1µm thick [111] lamellae, in otherwise colorless diamond. The pink diamonds fall into two groups: 1) those from Argyle in Australia and Santa Elena in Venezuela, and 2) those from other localities. TEM imaging from FIB sections revealed that twinning is the likely mechanism by which plastic deformation is accommodated for the pink diamonds. The deformation creates new centers, including the one responsible for the pink color, which remains unidentified. The differences in the plastic deformation features for the two groups might correlate to the particular geologic conditions under which the diamonds formed. Fluorescence and thermoluminescence experiments on natural chameleon diamonds reveal that an emission band, peaking near 556nm, may be stimulated via a number of different mechanisms. We discuss the implications of our observations for the electronic structure of the 556nm-fluorescing defect center, and the connections to the unidentified color center responsible for chameleon color changes.
Abstract: Oldoinyo Lengai is situated within the Gregory Rift Valley (northern Tanzania) and is the only active volcano erupting natrocarbonatite lava. This study investigates the texture and mineralogy of the June 1993 lava at Oldoinyo Lengai, and presents petrographic evidence of liquid immiscibility between silicate, carbonate, chloride, and fluoride melt phases. The 1993 lava is a porphyritic natrocarbonatite consisting of abundant phenocrysts of alkali carbonates, nyerereite and gregoryite, set in a quenched groundmass, composed of sodium carbonate, khanneshite, Na-sylvite and K-halite, and a calcium fluoride phase. Dispersed in the lava are silicate spheroids (< 2 mm) with a cryptocrystalline silicate mineral assemblage wrapped around a core mineral. We have identified several textural features preserved in the silicate spheroids, melt inclusions, and carbonatite groundmass that exhibit evidence of silicate-carbonate, carbonate-carbonate and carbonate-halide immiscibility. Rapid quenching of the lava facilitated the preservation of the end products of these liquid immiscibility processes within the groundmass. Textural evidence (at both macro- and micro-scales) indicates that the silicate, carbonate, chloride and fluoride phases of the lava unmixed at different stages of evolution in the magmatic system.
Abstract: Forty-one diamonds sourced from the Juina-5 kimberlite pipe in Southern Brazil, which contain optically identifiable inclusions, have been studied using an integrated approach. The diamonds contain <20 ppm nitrogen (N) that is fully aggregated as B centres. Internal structures in several diamonds revealed using cathodoluminescence (CL) are unlike those normally observed in lithospheric samples. The majority of the diamonds are composed of isotopically light carbon, and the collection has a unimodal distribution heavily skewed towards ?13C ~ ?25 ‰. Individual diamonds can display large carbon isotope heterogeneity of up to ~15 ‰ and predominantly have isotopically lighter cores displaying blue CL, and heavier rims with green CL. The light carbon isotopic compositions are interpreted as evidence of diamond growth from abiotic organic carbon added to the oceanic crust during hydrothermal alteration. The bulk isotopic composition of the oceanic crust, carbonates plus organics, is equal to the composition of mantle carbon (?5 ‰), and we suggest that recycling/mixing of subducted material will replenish this reservoir over geological time. Several exposed, syngenetic inclusions have bulk compositions consistent with former eclogitic magnesium silicate perovskite, calcium silicate perovskite and NAL or CF phases that have re-equilibrated during their exhumation to the surface. There are multiple occurrences of majoritic garnet with pyroxene exsolution, coesite with and without kyanite exsolution, clinopyroxene, Fe or Fe-carbide and sulphide minerals alongside single occurrences of olivine and ferropericlase. As a group, the inclusions have eclogitic affinity and provide evidence for diamond formation at pressures extending to Earth’s deep transition zone and possibly the lower mantle. It is observed that the major element composition of inclusions and isotopic compositions of host Juina-5 diamonds are not correlated. The diamond and inclusion compositions are intimately related to subducted material and record a polybaric growth history across a depth interval stretching from the lower mantle to the base of the lithosphere. It is suggested that the interaction of slab-derived melts and mantle material combined with subsequent upward transport in channelised networks or a buoyant diapir explains the formation of Juina-5 diamonds. We conclude that these samples, despite originating at great mantle depths, do not provide direct information about the ambient mantle, instead, providing a snapshot of the Earth’s deep carbon cycle.
Enigmatic relationship between silicic and volcanic and plutonic rocks: geophysical evidence for silicic crustal melt in the continents: where. What kind, and how much?
Abstract: Fe-rich carbonatites with a mineral assemblage of ankerite-calcite or siderite are widespread in southern Siberia, Russia. The siderite carbonatites are associated with F-Ba-Sr-REE mineralization and have a 40Ar/39Ar age of 117.2 ± 1.3 Ma. Melt and fluid inclusions suggest that the carbonatites formed from volatile-rich alkali- and chloride-bearing carbonate melts. Ankerite-calcite carbonatites formed from carbonatite melt at a temperature of more than 790 °C. The ferrocarbonatites (the second phase of carbonatite intrusion) formed from a sulfate-carbonate-chloride fluid phase (brine-melt) at >650 °C and ?360 MPa. The brine-melt fluid phase had high concentrations of Fe and LREEs. A subsequent hydrothermal overprint contributed to the formation of economically important barite-Sr-fluorite-REE mineralization in polymict siderite breccia.
Abstract: The relationship between plate- and plume-tectonics is considered in view of the growth and breakdown of supercontinents, active rifting, the formation of passive volcanic-type continental margins, and the origin of time-progressive volcanic chains on oceanic and continental plates. The mantle wind phenomenon is described, as well as its effect on plume morphology and anisotropy of the ambient mantle. The interaction of plumes and mid-ocean ridges is discussed. The principles and problems of plume activity analysis in subduction- and collision-related foldbelts are considered and illustrated with examples.
Abstract: The start of plate tectonics on Earth is one of the most controversial issues in modern geology, with proposed timings covering almost the entire history of our planet. On page 2387 of this issue (vol. 100, 2015), Blichert-Toft and co-authors report Sm-Nd and Lu-Hf isotopic and lithophile trace element data for early Archean komatiites from the Barberton Greenstone Belt (GB) in South Africa, and argue for the onset of plate tectonics on Earth as early as 3.5 Ga. The studied komatiites show a large decoupling of the two isotopic systems and lithophile trace element signatures that are most consistent with deep-water, pelagic sediments being present in the lower-mantle source of these lavas. Their conclusions have far-reaching implications for advancing our understanding of how the Earth system operated in the distant geological past.
Doklady Earth Sciences, Vol. 470, 2, pp. 1059-1062.
Russia
Deposit - Internationalskaya
Abstract: The staged high-pressure annealing of natural cubic diamonds with numerous melt microinclusions from the Internatsional’naya kimberlite pipe was studied experimentally. The results mainly show that the carbonate phases, the daughter phases in partially crystallized microinclusions in diamonds, may undergo phase transformations under the mantle P-T conditions. Most likely, partial melting and further dissolution of dolomite in the carbonate-silicate melt (homogenization of inclusions) occur in inclusions. The experimental data on the staged high-pressure annealing of diamonds with melt microinclusions allow us to estimate the temperature of their homogenization as 1400-1500°C. Thus, cubic diamonds from the Internatsional’naya pipe could have been formed under quite high temperatures corresponding to the lithosphere/asthenosphere boundary. However, it should be noted that the effect of selective capture of inclusions with partial loss of volatiles in relation to the composition of the crystallization medium is not excluded during the growth. This may increase the temperature of their homogenization significantly between 1400 and 1500°C.
Abstract: The specific gray to almost black diamonds of rounded morphology are especially typical in alluvial placers of the northeastern part of the Siberian platform. The results of study of internal structure of these diamonds are presented. X-ray topography and birefringence patterns of polished plates of studied diamonds show their radial mosaic structure. Diamonds consists of slightly misorientated (up to 20?) subindividuals which are combined to mosaic wedge-shaped sectors. Electron back-scatter diffraction technique has demonstrated that subindividuals are often combined in the single large blocks (subgrains). The whole crystals commonly consist of several large subgrains misoriented up to 5° to one another. The total nitrogen content of these diamonds vary in the range 900-3300 ppm and nitrogen aggregation state (NB/(NB + NA)*100) from 25 to 64 %. Rounded diamond crystals of variety V are suggested to have been formed at the high growth rate caused by the high oversaturation of carbon in the crystallization medium. It may result in the splitting of growing crystal and their radial mosaic structure as a sequence. High content of structural nitrogen defects and the great number of mechanical impurities - various mineral and fluid inclusions may also favor to generation of this structure.
International Journal of Earth Sciences, in press available, 27p.
Africa, Zimbabwe
Geophysics - magnetics
Abstract: Regional aeromagnetic data from the south-central Zimbabwe Craton have been digitally processed and enhanced for geological and structural mapping and tectonic interpretation integrated with gravity data, to constrain previous interpretations based on tentative geologic maps and provide new information to link these structural features to known tectonic events. The derived maps show excellent correlation between magnetic anomalies and the known geology, and extend lithological and structural mapping to the shallow/near subsurface. In particular, they reveal the presence of discrete crustal domains and several previously unrecognised dykes, faults, and ultramafic intrusions, as well as extensions to others. Five regional structural directions (ENE, NNE, NNW, NW, and WNW) are identified and associated with trends of geological units and cross-cutting structures. The magnetic lineament patterns cut across the >2.7 Ga greenstone belts, which are shown by gravity data to be restricted to the uppermost 10 km of the crust. Therefore, the greenstone belts were an integral part of the lithosphere before much of the upper crustal (brittle) deformation occurred. Significantly, the observed magnetic trends have representatives craton-wide, implying that our interpretation and inferences can be applied to the rest of the craton with confidence. Geological-tectonic correlation suggests that the interpreted regional trends are mainly 2.5 Ga (Great Dyke age) and younger, and relate to tectonic events including the reactivation of the Limpopo Belt at 2.0 Ga and the major regional igneous/dyking events at 1.8-2.0 Ga (Mashonaland), 1.1 Ga (Umkondo), and 180 Ma (Karoo). Thus, their origin is here inferred to be inter- and intra-cratonic collisions and block movements involving the Zimbabwe and Kaapvaal Cratons and the Limpopo Belt, and later lithospheric heating and extension associated with the break-up of Gondwana. The movements produced structures, or reactivated older fractures, that were exploited by Late Archaean and Proterozoic mafic intrusions. There was interplay between vertical and horizontal tectonics as seen in similar terrains worldwide.
International Journal of Earth Sciences, Vol. 105, 8, pp. 2175-2201.
Africa, Zimbabwe
Geophysics - gravity
Abstract: Regional aeromagnetic data from the south-central Zimbabwe Craton have been digitally processed and enhanced for geological and structural mapping and tectonic interpretation integrated with gravity data, to constrain previous interpretations based on tentative geologic maps and provide new information to link these structural features to known tectonic events. The derived maps show excellent correlation between magnetic anomalies and the known geology, and extend lithological and structural mapping to the shallow/near subsurface. In particular, they reveal the presence of discrete crustal domains and several previously unrecognised dykes, faults, and ultramafic intrusions, as well as extensions to others. Five regional structural directions (ENE, NNE, NNW, NW, and WNW) are identified and associated with trends of geological units and cross-cutting structures. The magnetic lineament patterns cut across the >2.7 Ga greenstone belts, which are shown by gravity data to be restricted to the uppermost 10 km of the crust. Therefore, the greenstone belts were an integral part of the lithosphere before much of the upper crustal (brittle) deformation occurred. Significantly, the observed magnetic trends have representatives craton-wide, implying that our interpretation and inferences can be applied to the rest of the craton with confidence. Geological-tectonic correlation suggests that the interpreted regional trends are mainly 2.5 Ga (Great Dyke age) and younger, and relate to tectonic events including the reactivation of the Limpopo Belt at 2.0 Ga and the major regional igneous/dyking events at 1.8-2.0 Ga (Mashonaland), 1.1 Ga (Umkondo), and 180 Ma (Karoo). Thus, their origin is here inferred to be inter- and intra-cratonic collisions and block movements involving the Zimbabwe and Kaapvaal Cratons and the Limpopo Belt, and later lithospheric heating and extension associated with the break-up of Gondwana. The movements produced structures, or reactivated older fractures, that were exploited by Late Archaean and Proterozoic mafic intrusions. There was interplay between vertical and horizontal tectonics as seen in similar terrains worldwide.
International Journal of Earth Sciences, Vol. 105, 8, pp. 2175-2201.
Africa, Zimbabwe
Geophysics - magnetics
Abstract: Regional aeromagnetic data from the south-central Zimbabwe Craton have been digitally processed and enhanced for geological and structural mapping and tectonic interpretation integrated with gravity data, to constrain previous interpretations based on tentative geologic maps and provide new information to link these structural features to known tectonic events. The derived maps show excellent correlation between magnetic anomalies and the known geology, and extend lithological and structural mapping to the shallow/near subsurface. In particular, they reveal the presence of discrete crustal domains and several previously unrecognised dykes, faults, and ultramafic intrusions, as well as extensions to others. Five regional structural directions (ENE, NNE, NNW, NW, and WNW) are identified and associated with trends of geological units and cross-cutting structures. The magnetic lineament patterns cut across the >2.7 Ga greenstone belts, which are shown by gravity data to be restricted to the uppermost 10 km of the crust. Therefore, the greenstone belts were an integral part of the lithosphere before much of the upper crustal (brittle) deformation occurred. Significantly, the observed magnetic trends have representatives craton-wide, implying that our interpretation and inferences can be applied to the rest of the craton with confidence. Geological-tectonic correlation suggests that the interpreted regional trends are mainly 2.5 Ga (Great Dyke age) and younger, and relate to tectonic events including the reactivation of the Limpopo Belt at 2.0 Ga and the major regional igneous/dyking events at 1.8-2.0 Ga (Mashonaland), 1.1 Ga (Umkondo), and 180 Ma (Karoo). Thus, their origin is here inferred to be inter- and intra-cratonic collisions and block movements involving the Zimbabwe and Kaapvaal Cratons and the Limpopo Belt, and later lithospheric heating and extension associated with the break-up of Gondwana. The movements produced structures, or reactivated older fractures, that were exploited by Late Archaean and Proterozoic mafic intrusions. There was interplay between vertical and horizontal tectonics as seen in similar terrains worldwide.
Global Business and Organizational Excellence, Vol. 35, 3, pp. 6-17.
India
Cutting and polishing industry
Abstract: As informal firms in emerging markets are expanding their role in global supply chains, managers of formal multinational organizations are increasingly relying on their services. Yet, little is known about the organizational aspects of enterprises in the informal sector. An investigation of informal firms engaged in the cutting and polishing of diamonds (CPD) in Surat, India, the world's hub of diamond manufacturing, reveals that in the absence of well-defined strategies, structures, and processes, the intangible aspect of organizing—specifically, organizational culture—governs business practices. Despite the strong clan-like orientation of these firms and a culture focused on loyalty, trust, team work, and consensus, the study found evidence of hierarchical characteristics and market-driven leadership. Coupled with insightful observations of the overall Indian CPD sector, these findings can help guide managers in planning strategies for effective partnerships with informal firms, regardless of their industry.
International Journal of Earth Sciences, Vol. 105, 4, pp. 1087-1107.
India
Not specific to diamonds
Abstract: We have carried out radioelemental (232Th, 238U, 40K), petrological and geochemical analyses on granitoids and gneisses covering major rock formations of the Bundelkhand craton, central India. Our data reveal that above characteristics are distinct among granitoids (i.e. pink, biotite and grey granitoids) and gneisses (i.e. potassic and sodic types). Pink granitoid is K-feldspar-rich and meta-aluminous to per-aluminous in character. Biotite granitoid is meta-aluminous in character. Grey granitoid is rich in Na-feldspar and mafic minerals, granodiorite to diorite in composition and meta-aluminous in character. Among these granitoids, radioelements (Th, U, K) are highest in pink granitoid (45.0 ± 21.7 ppm, 7.2 ± 3.4 ppm, 4.2 ± 0.4 %), intermediate in biotite granitoid (44.5 ± 28.2 ppm, 5.4 ± 2.8 ppm, 3.4 ± 0.7 %) and lowest in grey granitoid (17.7 ± 4.3 ppm, 4.4 ± 0.6 ppm, 3.0 ± 0.4 %). Among gneisses, potassic-type gneisses have higher radioelements (11.8 ± 5.3 ppm, 3.1 ± 1.2 ppm, 2.0 ± 0.5 %) than the sodic-type gneisses (5.6 ± 2.8 ppm, 1.3 ± 0.5 ppm, 1.4 ± 0.7 %). Moreover, the pink granitoid and the biotite granitoid have higher Th/U (6 and 8, respectively) compared to the grey granitoid (Th/U: 4), implying enrichment of Th in pink and biotite granitoids relative to grey granitoid. K/U among pink, biotite and grey granitoids shows little variation (0.6 × 104, 0.6 × 104, 0.7 × 104, respectively), indicating relatively similar increase in K and U. Therefore, mineralogical and petrological data along with radioelemental ratios suggest that radioelemental variations in these lithounits are mainly related to abundances of the radioactive minerals that have formed by the fractionation of LILE from different magma sources. Based on present data, the craton can be divided into three distinct zones that can be correlated with its evolution in time and space. The central part, where gneisses are associated with metavolcanics of greenstone belt, is characterized by lowest radioelements and is the oldest component. The southern part, dominated by pink granitoid, is characterized by highest radioelements and is the youngest part. The northern part, dominated by grey and biotite granitoid, is characterized by moderate radioelements.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 8p.
Technology
Sorting - X-ray DE-XRT
Abstract: In May 2009 a test work programme was carried out at the sorting laboratory of CommodasUltrasort in Germany which was aimed at establishing the efficiency of Xray transmission sorting for the recovery of unliberated diamonds in a size range of +8mm. A PRO Tertiary XRT belt sorter with a working width of 600mm and a belt speed of - 3mJs was used for the test work. Dual energy X-ray transmission sorting is a type of sensor-based sorting which uses an X-ray scanning system, The attenuation of the transmitting X-rays is measured at two different energy levels, Thereby it is possible to eliminate the effect of the particle thickness on the measurement result. The effective measurement results in a classification by elemental order based on the periodic table. Diamonds are mostly composed of Carbon, which has an atomic number of 6. Compared to Silicon with an atomic number of 14, Diamonds show up much lighter on an XRT image than Silica-based gravels (typical DMS sinks material usually has more dense minerals such as Fe, and Mn which shows an even, darker X-ray image than Si). Tests were run with ele.ven Boarl Diamonds in a size range of -15+8mm mixed into 13kg alluvial DMS sinks gravel in a size range of -25+8mm. All liberated Boart Diamonds were recovered at feed rates of 15t/h at average yields of 7.6g per ejected Diamond. In a second test series the Boarl Diamonds were covered in 20% Gypsum by weight and run again at 15t/h. All unliberated Diamonds were recovered at an average yield of 12.2g per ejected Diamond. The paper outlines the test work results in detail.
Abstract: Due to the acute scarcity of very ancient rocks, the composition of Earth’s embryonic crust during the Hadean eon (>4.0 billion years ago) is a critical unknown in our search to understand how the earliest continents evolved. Whether the Hadean Earth was dominated by mafic-composition crust, similar to today’s oceanic crust1, 2, 3, 4, or included significant amounts of continental crust5, 6, 7, 8 remains an unsolved question that carries major implications for the earliest atmosphere, the origin of life, and the geochemical evolution of the crust-mantle system. Here we present new U-Pb and Hf isotope data on zircons from the only precisely dated Hadean rock unit on Earth—a 4,019.6 ± 1.8?Myr tonalitic gneiss unit in the Acasta Gneiss Complex, Canada. Combined zircon and whole-rock geochemical data from this ancient unit shows no indication of derivation from, or interaction with, older Hadean continental crust. Instead, the data provide the first direct evidence that the oldest known evolved crust on Earth was generated from an older ultramafic or mafic reservoir that probably surfaced the early Earth.
Abstract: Due to the acute scarcity of very ancient rocks, the composition of Earth’s embryonic crust during the Hadean eon (>4.0 billion years ago) is a critical unknown in our search to understand how the earliest continents evolved. Whether the Hadean Earth was dominated by mafic-composition crust, similar to today’s oceanic crust1, 2, 3, 4, or included significant amounts of continental crust5, 6, 7, 8 remains an unsolved question that carries major implications for the earliest atmosphere, the origin of life, and the geochemical evolution of the crust-mantle system. Here we present new U-Pb and Hf isotope data on zircons from the only precisely dated Hadean rock unit on Earth—a 4,019.6 ± 1.8?Myr tonalitic gneiss unit in the Acasta Gneiss Complex, Canada. Combined zircon and whole-rock geochemical data from this ancient unit shows no indication of derivation from, or interaction with, older Hadean continental crust. Instead, the data provide the first direct evidence that the oldest known evolved crust on Earth was generated from an older ultramafic or mafic reservoir that probably surfaced the early Earth.
Abstract: The mechanisms that result in the formation of high-pressure (HP) and ultrahigh-pressure (UHP) rocks are controversial. The usual interpretation assumes that pressure is close to lithostatic, petrological pressure estimates can be transferred to depth, and (U)HP rocks have been exhumed from great depth. An alternative explanation is that pressure can be larger than lithostatic, particularly in continental collision zones, and (U)HP rocks could thus have formed at shallower depths. To better understand the mechanical feasibility of these hypotheses, we performed thermomechanical numerical simulations of a typical subduction and collision scenario. If the subducting crust is laterally homogeneous and has small effective friction angles (and is thus weak), we reproduce earlier findings that <20% deviation of lithostatic pressure occurs within a subduction channel. However, many orogenies involve rocks that are dry and strong, and the crust is mechanically heterogeneous. If these factors are taken into account, simulations show that pressures can be significantly larger than lithostatic within nappe-size, mechanically strong crustal units, or within a strong lower crust, as a result of tectonic deformation. Systematic simulations show that these effects are most pronounced at the base of the crust (at ?40 km), where pressures can reach 2-3 GPa (therefore within the coesite stability field) for millions of years. These pressures are often released rapidly during ongoing deformation. Relating metamorphic pressure estimates to depth might thus be problematic in mechanically heterogeneous crustal rock units that appear to have been exhumed in an ultrafast manner.
Progress in Earth and Planetary Science, Vol. 3, Apr. 28, P. 9-
Mantle
Subduction
Abstract: In the forearc region, aqueous fluids are released from the subducting slab at a rate depending on its thermal state. Escaping fluids tend to rise vertically unless they meet permeability barriers such as the deformed plate interface or the Moho of the overriding plate. Channeling of fluids along the plate interface and Moho may result in fluid overpressure in the oceanic crust, precipitation of quartz from fluids, and low Poisson ratio areas associated with tremors. Above the subducting plate, the forearc mantle wedge is the place of intense reactions between dehydration fluids from the subducting slab and ultramafic rocks leading to extensive serpentinization. The plate interface is mechanically decoupled, most likely in relation to serpentinization, thereby isolating the forearc mantle wedge from convection as a cold, potentially serpentinized and buoyant, body. Geophysical studies are unique probes to the interactions between fluids and rocks in the forearc mantle, and experimental constrains on rock properties allow inferring fluid migration and fluid-rock reactions from geophysical data. Seismic velocities reveal a high degree of serpentinization of the forearc mantle in hot subduction zones, and little serpentinization in the coldest subduction zones because the warmer the subduction zone, the higher the amount of water released by dehydration of hydrothermally altered oceanic lithosphere. Interpretation of seismic data from petrophysical constrain is limited by complex effects due to anisotropy that needs to be assessed both in the analysis and interpretation of seismic data. Electrical conductivity increases with increasing fluid content and temperature of the subduction. However, the forearc mantle of Northern Cascadia, the hottest subduction zone where extensive serpentinization was first demonstrated, shows only modest electrical conductivity. Electrical conductivity may vary not only with the thermal state of the subduction zone, but also with time for a given thermal state through variations of fluid salinity. High-Cl fluids produced by serpentinization can mix with the source rocks of the volcanic arc and explain geochemical signatures of primitive magma inclusions. Signature of deep high-Cl fluids was also identified in forearc hot springs. These observations suggest the existence of fluid circulations between the forearc mantle and the hot spring hydrothermal system or the volcanic arc. Such circulations are also evidenced by recent magnetotelluric profiles.
Doklady Earth Sciences, Vol. 466, 2, Feb. pp. 173-176.
Russia, Yakutia
Deposit - International
Abstract: The results of study of rutile inclusions in pyrope from the Internatsionalnaya kimberlite pipe are presented. Rutile is characterized by unusually high contents of impurities (up to 25 wt %). The presence of Cr2O3 (up to 9.75 wt %) and Nb2O5 (up to 15.57 wt %) are most typical. Rutile inclusions often occur in assemblage with Ti-rich oxides: picroilmenite and crichtonite group minerals. The Cr-pyropes with inclusions of rutile, picroilmenite, and crichtonite group minerals were formed in the lithospheric mantle beneath the Mirnyi field during their joint crystallization from melts enriched in Fe, Ti, and other incompatible elements as a result of metasomatic enrichment of the depleted lithospheric mantle.
In situ oxygen isotope, major-, and trace element constraints on the metasomatic modification and crustal origin of a Diamondiferous eclogite from Roberts Victor, Kaapvaal Craton.
Geochimica et Cosmochimica Acta, in press available, 45p.
In situ oxygen-isotope, major, and trace element constraints on the metasomatic modification and crust origin of a Diamondiferous eclogite from Roberts Victor, Kaapvaal craton.
Geochimica et Cosmochimica Acta, Vol. 174, pp. 345-359.
Abstract: How much of Earth's compositional variation dates to processes that occurred during planet formation remains an unanswered question. High-precision tungsten isotopic data from rocks from two large igneous provinces, the North Atlantic Igneous Province and the Ontong Java Plateau, reveal preservation to the Phanerozoic of tungsten isotopic heterogeneities in the mantle. These heterogeneities, caused by the decay of hafnium-182 in mantle domains with high hafnium/tungsten ratios, were created during the first ~50 million years of solar system history, indicating that portions of the mantle that formed during Earth’s primary accretionary period have survived to the present
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 10p.
Africa, Botswana
Deposit - Jwaneng
Abstract: Debswana's Jwaneng Mine (south-central Botswana) is the richest diamond mine• in the world and has been contributing substantial revenue to Botswana since the mine started operating in 1982. The resource consists of 3 separate volcanic pipes/vents namely North, South and Centre pipes (2 additional small kimberlite bodies have also been intersected within the mining pit) which erupted through Transvaal strata and the overlying Karoo sediments - 245 million years ago. Although earlier drilling and geophysical surveys suggest that the 3 pipes extend to depths greater than 1 km below the surface, the resource is only at an indicated level of confidence to a depth of 400m, and mining activities will start exploiting the inferred resource material below 400m in 2014.
Journal of South African Institute of Mining and Metallurgy, Vol. 116, Feb. pp. 189-201.
Canada, Northwest Territories
Deposit - Fox, Ekati
Abstract: Multiple-point simulation (MPS) methods have been developed over the last decade as a means of reproducing complex geological patterns while generating stochastic simulations. Some geological spatial configurations are complex, such as the spatial geometries and patterns of diamond-bearing kimberlite pipes and their internal facies controlling diamond quality and distribution. Two MPS methods were tested for modelling the geology of a diamond pipe located at the Ekati mine, NT, Canada. These are the single normal equation simulation algorithm SNESIM, which captures different patterns from a training image (TI), and the filter simulation algorithm FILTERSIM, which classifies the patterns founded on the TI. Both methods were tested in the stochastic simulation of a four-category geology model: crater, diatreme, xenoliths, and host rock. Soft information about the location of host rock was also used. The validation of the simulation results shows a reasonable reproduction of the geometry and data proportions for all geological units considered; the validation of spatial statistics, however, shows that although simulated realizations from both methods reasonably reproduce the fourth-order spatial statistics of the TI, they do not reproduce well the same spatial statistics of the available data (when this differs from the TI). An interesting observation is that SNESIM better imitated the shape of the pipe, while FILTERSIM yielded a better reproduction of the xenolith bodies.
Abstract: Recent studies of chromite deposits from the mantle section of ophiolites have revealed a most unusual collection of minerals present as inclusions within the chromite. The initial discoveries were of diamonds from the Luobosa ophiolite in Tibet. Further work has shown that mantle chromitites from ophiolites in Tibet, the Russian Urals and Oman contain a range of crustal minerals including zircon, and a suite of highly reducing minerals including carbides, nitrides and metal alloys. Some of the minerals found represent very high pressure phases indicating that their likely minimum depth is close to the top of the mantle transition zone. These new results suggest that crustal materials may be subducted to mantle transition zone depths and subsequently exhumed during the initiation of new subduction zones-the most likely environment for the formation of their host ophiolites. The presence of highly reducing phases indicates that at mantle transition zone depths the Earth's mantle is "super"-reducing.
Abstract: The viscosity structure of Earth’s deep mantle affects the thermal evolution of Earth, the ascent of mantle plumes, settling of subducted oceanic lithosphere, and the mixing of compositional heterogeneities in the mantle. Based on a reanalysis of the long-wavelength nonhydrostatic geoid, we infer viscous layering of the mantle using a method that allows us to avoid a priori assumptions about its variation with depth. We detect an increase in viscosity at 800- to 1200-kilometers depth, far greater than the depth of the mineral phase transformations that define the mantle transition zone. The viscosity increase is coincident in depth with regions where seismic tomography has imaged slab stagnation, plume deflection, and changes in large-scale structure and offers a simple explanation of these phenomena.
Abstract: Asthenosphere beneath the relatively thin lithosphere of the Basin and Range province appears to be juxtaposed in step-like fashion against the Colorado Plateau's thick lithospheric keel. Primary to near-primary basalts are found above this edge, in the San Francisco-Morman Mountain volcanic fields, north central Arizona, western USA. We show that at least two distinct peridotite-dominated mantle end-members contributed to the origin of the basalts. One has paired Nd and Hf isotopic characteristics that cluster near the mantle array and trace element patterns as expected for melts generated in the asthenosphere, possibly in the presence of garnet. The second has isotopic compositions displaced above the ?Hf - ?Nd mantle array which, together with its particular trace element characteristics, indicate contributions from hydrogenous sediments and/or melt (carbonatite or silicate)-related metasomatism. Melt equilibration temperatures obtained from Si- and Mg-thermobarometry are mostly 1340-1425°C and account for the effects of water (assumed to be 2 wt.%) and estimated CO2 (variable). Melt equilibration depths cluster at the inferred location of the lithosphere-asthenosphere boundary at ?70-75 km beneath the southwestern margin of the Colorado Plateau but scatter to somewhat greater values (?100 km). Melt generation may have initiated in or below the garnet-spinel facies transition zone by edge-driven convection and continued as mantle and/or melts upwelled, assimilating and sometimes equilibrating with shallower contaminated mantle, until melts were finally extracted.
Abstract: A comprehensive study based on U-Pb and Hf isotope analyses of zircons from gneisses has been conducted along the western part (Babina area) of the E-W-trending Bundelkhand Tectonic Zone in the central part of the Archaean Bundelkhand Craton. 207Pb-206Pb zircon ages and Hf isotopic data indicate the existence of a felsic crust at ~ 3.59 Ga, followed by a second tectonothermal event at ~ 3.44 Ga, leading to calc-alkaline magmatism and subsequent crustal growth. The study hence suggests that crust formation in the Bundelkhand Craton occurred in a similar time-frame to that recorded from the Singhbhum and Bastar cratons of the North Indian Shield.
Progress in Earth and Planetary Science, Vol. 3, 20, 17p.
United States, Colorado Plateau
Metasomatism
Abstract: This is the first report on amphibole exsolution in pyrope from the Colorado Plateau. Pyrope crystals delivered from mantle depths underneath the Colorado Plateau by kimberlitic volcanism at 30 Ma were collected at Garnet Ridge, northern Arizona. The garnet grains analyzed in this study occur as discrete crystals (without adjacent rock matrix) and are classified into two major groups, Cr-rich pyrope and Cr-poor pyrope. The Cr-poor pyrope group is divided into four subgroups based on exsolved phases: amphibole lamella type, ilmenite lamella type, dense lamellae type, and clinopyroxene/amphibole lamellae type. Exsolved amphibole occurs in amphibole lamella type, dense lamellae type, and clinopyroxene/amphibole lamellae type of Cr-poor pyrope. The amphibole crystals tend to have preferred orientations in their garnet hosts and occur as monomineralic hexagonal or rhombic prisms and tablets, and as multimineralic needles or blades with other exsolved phases. Exsolved amphibole has pargasitic compositions (Na2O up to 1.6 apfu based on 23 oxygen). Garnet host crystals that have undergone amphibole exsolution have low OH contents (2-42 ppmw H2O) compared to garnets that do not have amphibole lamellae (up to 115 ppmw H2O). The low OH contents of garnets hosting amphibole lamellae suggest loss of OH from garnet during amphibole exsolution. Amphibole exsolution from pyrope resulted from breakdown of a precursor “hydrous Na-garnet” composition (Mg,Na+ x)3(Al2???x, Mgx)2Si3O12???2x(OH)2x. Exsolution of amphibole and other phases probably occurred during exhumation to depths shallower than 100 km prior to volcanic eruption. Based on the abundance and composition of exsolved clinopyroxene and amphibole lamellae in one garnet, hydrous Na-garnet had excess silicon (Si3.017 apfu, 12 oxygen normalization, vs. X3Y2Si3O12 for typical garnet). Comparison with experimental data suggests crystallization at pressures near 6-8 GPa. Garnet crystals that host exsolved amphibole have compositions (Pyp49-76, 3-10 wt% CaO, and up to 0.6 wt% Cr2O3) similar to garnets reported from pyroxenites, and have pyrope-almandine-grossular compositional ranges that overlap with the Cr-rich pyrope (typical lherzolitic garnet). Hydrous Na-garnet was likely formed by metasomatic reactions between Cr-rich pyrope and Na-rich aqueous fluid in the deep upper mantle. The most likely source of metasomatic Na-rich fluid is ancient oceanic crust that was subducted before subduction of the Farallon Plate beneath the Colorado Plateau.
Abstract: Paragenetic analysis of pyropes from alluvial deposits of the Muna—Markha interfluve (Sakha-Yakutia Republic) made it possible to distinguish relatively uniform areas that are promising for the discovery of kimberlite bodies.
Abstract: Knowing the density of silicate liquids at high pressure is essential to answer questions relevant to the presence of magmas at depth, whether that be in the present Earth or in its earliest times, during differentiation of the planet. Melts have unique physical and chemical properties, which vary as a function pressure, and chemical composition. The focus here will be on in situ measurements of the density of magmas, with a presentation of the available methods and of the main results obtained so far, including why some magmas may be trapped at depth. Understanding the macroscopical physical properties of magmas requires an accurate microscopic structural description. Structural descriptions of compressed magmas are becoming more widely available, from experiments and from theoretical calculations. These structural inputs are used to understand the compression mechanisms at stake in the densification of magmas, e.g. the collapse of voids, coordination increase for the major cations, and bond compressibility. These densification processes profoundly affect not only the physical properties of the melt, but also its chemical properties, i.e. the way element partition between the magma and a metallic melt or between the magma and crystals.
Geochemistry: Exploration, Environment, Analysis, Vol. 16, 3-4, pp. 181-192.
Technology
Geochemistry
Abstract: Three portable X-ray fluorescence (pXRF) methods were compared and tested in an exploration program using till in Sinoselkä, northern Finland. The use of one truck-mounted XRF unit and two handheld pXRF analysers were tested for basal till samples gathered using percussion drilling with a flow-through sampling bit. The datasets were compared to both conventional aqua regia based analyses and each other. The results prove that a correlation between the data generated by different pXRF methods was acceptable for some major (Ca, Fe) and most of the base metal elements (like As, Cr, Cu, Mn, Ni, Pb, Zn) in the Sinoselkä area. The pXRF analyses also correlate well with the aqua regia geochemical data of the same elements. Distribution of the elements was comparable to the lithological changes in the underlying bedrock that indicates a short glacial transport distance. It is also demonstrated that more than absolute values, the relative values and their changes are those which should be considered and carefully examined. The results reported here emphasize the usefulness of pXRF analysers in till geochemical exploration and demonstrate that they involve easy and fast methods to collect geochemical data for tracing sources of multi-metal mineralization. Furthermore, pXRF is applicable in gold exploration, although indicator elements like As, Bi, Cu, Mn and Sb have to be used instead of Au.
Abstract: Two areas with different types of hydration (serpentinization), which occurred in two settings distinct in temperatures, pressures, and stresses, are spatially individualized in the ophiolitic ultramafic massifs of the Polar Urals. The high-temperature hydration of ultramafic rocks occurred in the lithosphere of the mantle wedge directly above the subducted slab. The initial conditions of hydration are limited to 1.2-2 GPa and 650-700°C; a stable assemblage of olivine + antigorite + magnetite ? amphibole ? talc ? chlorite was formed at 0.9-1.2 GPa and 550-600°C. The low-temperature mesh lizardite-chrysotile serpentinization occurred in the crustal, near-surface conditions. Both types of hydration were accompanied by release of hydrogen, which participates in abiogenic CH4 synthesis in the presence of CO2 dissolved in water.
Abstract: A dike -vein complex of potassic type of alkalinity recently discovered in the Baikal ledge, western Baikal area, southern Siberian craton, includes calcite and dolomite -ankerite carbonatites, silicate-bearing carbonatite, phlogopite metapicrite, and phoscorite. The most reliable 40Ar -39Ar dating of the rocks on magnesioriebeckite from alkaline metasomatite at contact with carbonatite yields a statistically significant plateau age of 1017.4 ± 3.2 Ma. The carbonatite is characterized by elevated SiO2 concentrations and is rich in K2O (K2O/Na2O ratio is 21 on average for the calcite carbonatite and 2.5 for the dolomite -ankerite carbonatite), TiO2, P2O5 (up to 9 wt %), REE (up to 3300 ppm), Nb (up to 400 ppm), Zr (up to 800 ppm), Fe, Cr, V, Ni, and Co at relatively low Sr concentrations. Both the metapicrite and the carbonatite are hundreds of times or even more enriched in Ta, Nb, K, and LREE relative to the mantle and are tens of times richer in Rb, Ba, Zr, Hf, and Ti. The high (Gd/Yb)CN ratios of the metapicrite (4.5 -11) and carbonatite (4.5 -17) testify that their source contained residual garnet, and the high K2O/Na2O ratios of the metapicrite (9 -15) and carbonatite suggest that the source also contained phlogopite. The Nd isotopic ratios of the carbonatite suggest that the mantle source of the carbonatite was mildly depleted and similar to an average OIB source. The carbonatites of various mineral composition are believed to be formed via the crystallization differentiation of ferrocarbonatite melt, which segregated from ultramafic alkaline melt.
Abstract: With convergent plate boundaries at some distance, the sources of the lithospheric stress field of the North Atlantic Realm are mainly mantle tractions at the base of the lithosphere, lithospheric density structure and topography. Given this, we estimate horizontal deviatoric stresses using a well-established thin sheet model in a global finite element representation. We adjust the lithospheric thickness and the sub-lithospheric pressure iteratively, comparing modelled in plane stress with the observations of the World Stress Map. We find that an anomalous mantle pressure associated with the Iceland and Azores melt anomalies, as well as topography are able to explain the general pattern of the principle horizontal stress directions. The Iceland melt anomaly overprints the classic ridge push perpendicular to the Mid Atlantic ridge and affects the conjugate passive margins in East Greenland more than in western Scandinavia. The dynamic support of topography shows a distinct maximum of c. 1000 m in Iceland and amounts <150 m along the coast of south-western Norway and 250 -350 m along the coast of East Greenland. Considering that large areas of the North Atlantic Realm have been estimated to be sub-aerial during the time of break-up, two components of dynamic topography seem to have affected the area: a short-lived, which affected a wider area along the rift system and quickly dissipated after break-up, and a more durable in the close vicinity of Iceland. This is consistent with the appearance of a buoyancy anomaly at the base of the North Atlantic lithosphere at or slightly before continental breakup, relatively fast dissipation of the fringes of this, and continued melt generation below Iceland.
Abstract: Plate tectonic reconstructions are usually constrained by the correlation of lineaments of surface geology and crustal structures. This procedure is, however, largely dependent on and complicated by assumptions on crustal structure and thinning and the identification of the continent-ocean transition. We identify two geophysically and geometrically similar upper mantle structures in the North Atlantic and suggest that these represent remnants of the same Caledonian collision event. The identification of this structural lineament provides a sub-crustal piercing point and hence a novel opportunity to tie plate tectonic reconstructions. Further, this structure coincides with the location of some major tectonic events of the North Atlantic post-orogenic evolution such as the occurrence of the Iceland Melt Anomaly and the separation of the Jan Mayen microcontinent. We suggest that this inherited orogenic structure played a major role in the control of North Atlantic tectonic processes.
Abstract: Lenses of ultramafic rocks occur in supracrustal high-grade gneiss in the northern Haskard Highlands, Shackleton Range, East Antarctica. Olivine-bearing garnet pyroxenite is the dominant rock type that is associated with hornblendite and subordinate spinel peridotite and amphibolite. The high-pressure (23-25 kbar) garnet-olivine assemblage of the pyroxenite formed during Pan-African eclogite-facies metamorphism. Associated collisional tectonics led to the incorporation of the ultramafic and mafic rocks in upper crustal rocks of a subducting continental margin. The ultramafic-mafic rocks are tracers of a paleo-suture zone and are critical for reconstructing Gondwana amalgamation. Thus, it is important to infer the tectonic setting of the rocks prior to emplacement into their current position, i.e., were the rocks part of the oceanic crust, the sub-oceanic, or the sub-continental mantle? Major and trace elements together with Pb and Nd isotope data imply that the precursor rocks of the pyroxenites and hornblendites (the latter being retrogressed pyroxenite equivalents) formed as plume-related melts, with many characteristics typical for ocean-island tholeiitic magmas. Hence, pyroxenite and hornblendite are interpreted as metamorphic equivalents of picritic melts. They differ from most garnet pyroxenites worldwide in composition and genesis. The latter formed as high-pressure clinopyroxene-rich cumulates from basaltic melts. The volumetrically minor amphibolites, sharing many geochemical characteristics with pyroxenites and hornblendites, are also interpreted as metamorphic equivalents of plume-related melts. It is inferred that the picritic melts crystallized at medium- to high-pressure conditions in the upper continental mantle or in the transition zone between mantle and continental crust. The subordinate spinel peridotites are interpreted as fragments of the uppermost, depleted mantle. They are probably the wall rocks into which the picritic melts intruded. The Pb and Nd mantle separation ages of the picritic melts range from 770 to 870 Ma. These model ages are very similar to the emplacement ages of numerous global mafic and ultramafic dykes, which are genetically linked to mantle plume activity that initiated Rodinia rifting and breakup. The protoliths of pyroxenite and related rocks in the Shackleton Range most likely formed during the initial stages of plume magmatism that eventually led to the Rodinia breakup.
Abstract: For decades, geologists have debated the geodynamic processes that operated in the young Earth. In the Archean, 4 and 2.5 billion years ago, the interior of the planet was much hotter which led to more rapid convection and, according to some authors, to an absence of plate tectonics. Komatiites (Fig. 1) - volcanic rocks with abnormal, olivine-enriched compositions - are thought to result from high-degrees of partial melting of extremely hot parts of the Earth’s mantle. This interpretation is blurred, however, by uncertainty as to the water content of komatiitic magmas. There are two schools of thought on this question: the first proposes that the magmas were dry (<0.1% water) and very hot (> 1600°C), and were produced in mantle plumes from the base of the mantle; the second suggests that the magmas were hydrated, with lower melting temperatures, and had formed in subduction settings. The analysed komatiite melt contained 30% magnesium oxide and 0.6% water and began to crystallize at a relatively low temperature of 1530°C. The chemical composition of the magma and low oxygen fugacity are inconsistent with a subduction setting. he mantle plume (orange) traverses the transition zone, which contains excess H2O, F and Cl in ringwoodite and/or wadsleyite (high pressure polymorphs of olivine).The plume is hot enough to be partially molten near the top of the transition zone (small black dots) and entrains hydrous melt (blue shapes) either from the layer at the upper boundary of the transition zone or from the hot boundary between the plume and the transition zone. Alternatively or additionally, the plume may entrain solid wadsleyite from the transition zone (green shapes). All these hydrous materials introduce H2O and possibly F and Cl into the plume and accelerate its melting (larger black dots). Further ascent of the plume generates more melt during decompression (large black dots), which then separates from the source and ascends to the surface without reaction with peridotite (purple stripes). Instead, the authors suggest that the magmas were generated in a deep mantle plume and that the water and other volatile components, especially the halogens (F, Cl), were entrained into the komatiitic magma as it passed through the transition zone between the upper and lower mantle, at a depth below 410 km (Fig. 3). This implies the existence of a deep reservoir of water in the mantle: a portion of the mantle containing a few thausends of parts per million of water in high pressure polymorphs of olivine wadsleyite, ringwoodite. This water may have accumulated during the primordial accretion of the Earth or by the unexpectedly early subduction of hydrated slabs that became trapped in the transition zone. Finally, the authors propose that modern mantle plumes do not extract water from the transition zone because they are colder and therefore entirely solid when they crossed the transition zone.
Abstract: A hypabyssal kimberlite dike in southwestern Pennsylvania (USA), emplaced through Proterozoic basement and Phanerozic cover, contains a xenocryst and xenolith assemblage typical of material sampled within the subcontinental lithosphere, including xenocrysts of Cr-rich pyrope, magnesiochromite, Cr-rich diopside, and peridotite xenoliths. Temperatures and depths of equilibration of the clinopyroxene (840 ºC and 130 km to 1350 ºC and 170 km) indicate some sampling in the field of diamond stability. Diamonds have not been reported, however, and the chemistry of the garnet (lherzolite, Cr-poor megacryst, and Group II eclogite) and spinel (<56.0 wt.% Cr2O3) are consistent with diamond absence and the off-craton tectonic setting of the kimberlite. An unusual feature of this suite is that, unlike most mantle xenolith/xenocryst spinel, some of those from Masontown have an unusually high silica content (to 0.59 wt.% SiO2). The significance of the high silica content is unclear, but may be related to an ultrahigh-pressure precursor chromite polymorph with a calcium ferrite structure, which can accommodate Si in solid solution.
Abstract: Although trace element concentrations in clinopyroxene serve as a useful tool for assessing the depletion and enrichment history of mantle peridotites, this is not applicable for peridotites in which the clinopyroxene component has been consumed (~ 25% partial melting). Orthopyroxene persists in mantle residues until ~ 40% melting and it is therefore this mineral that offers petrological insights into the evolution of refractory peridotites. Major and trace element concentrations in orthopyroxene ± clinopyroxene from two spinel facies harzburgitic xenolith suites from New Zealand are examined. Samples from Cape L'Evique (CLEV) on Chatham Island contain traces of clinopyroxene (< 2 modal %) but a suite from Lake Moana (MOA) in the South Island is devoid of this mineral. When compared with modelled orthopyroxene trace element budgets, which are constructed from a review of published source modes, melting modes and element/melt partition co-efficients, the measured orthopyroxene rare earth element data in both suites generally indicate minimums of 25-30% partial melting. These results are consistent with co-existing elevated Mg# in olivine (mostly 91.4 to 93.0) and orthopyroxene (mostly 91.3 to 93.6), high spinel Cr# (commonly > 45) and low orthopyroxene Al2O3 (generally < 3.1 wt%). However, comparison of modelled and measured orthopyroxene compositions shows that all samples, even the most refractory, have undergone metasomatism by small volume light rare earth element-bearing agents. Measured orthopyroxene Ti concentrations show that the metasomatic agent that affected the CLEV suite carried Ti, but that the MOA suite metasomatiser was Ti-poor. Orthopyroxene trace elements in the inspected rocks are therefore partly decoupled from the major element abundances, with the results demonstrating that even highly refractory peridotites can record evidence for mantle metasomatism.
Russian Geology and Geophysics, Vol. 56, pp. 1717-1737.
Africa, Tanzania
Deposit - Oldoinyo Lengai
Abstract: The paper is concerned with study of melt inclusions in minerals of ijolite xenoliths at Oldoinyo Lengai Volcano. Melt inclusions with different phase compositions occur in forsterite macrocrysts and in diopside, nepheline, fluorapatite, Ti-andradite, and Ti-magnetite crystals. Nepheline contains primary melt inclusions (silicate glass + gas-carbonate globule ± submicron globules ± sulfide globule ± daughter/trapped phases, represented by diopside, fluorapatite, Ti-andradite, and alumoakermanite). The gas-carbonate globule consists of a gas bubble surrounded by a fine-grained aggregate of Na-Ca-carbonates (nyerereite and gregoryite). Fluorapatite contains primary carbonate-rich melt inclusions in the core, which consist of nyerereite, gregoryite, thenardite, witherite, fluorite, villiaumite, and other phases. Their mineral composition is similar to natrocarbonatites. Primary melt inclusions (glass + gas bubble ± daughter phases) are rare in diopside and Ti-andradite. Diopside and forsterite have trails of secondary carbonate-rich inclusions. Besides the above minerals, these inclusions contain halite, sylvite, neighborite, Na-Ca-phosphate, alkali sulfates, and other rare phases. In addition, diopside contains sulfide inclusions (pyrrhotite ± chalcopy- rite ± djerfisherite ± galena ± pentlandite). The chemical compositions of silicate glasses in the melt inclusions vary widely. The glasses are characterized by high Na, K, and Fe contents and low Al contents. They have high total alkali contents (16-23 wt.% Na2O + K2O) and peralkalinity index [(Na + K)/Al] ranging from 1.1 to 7.6. The carbonate-rich inclusions in the ijolite minerals are enriched in Na, P, S, and Cl. The data obtained indicate that the parental melt in the intermediate chamber was heterogeneous and contained silicate, natrocarbonate, and sulfide components during the ijolite crystallization. According to heating experiments with melt inclusions, silicate-carbonate liquid immiscibility occurred at temperature over 580 °C.
Abstract: Boninite is a volcanic rock derived from shallow melting of highly depleted hydrous mantle, fluxed with water from subducted slabs. The eruption of boninite early in the history of the Izu-Bonin-Mariana (IBM) arc (~ 48-45 Ma), suggests generation by melting of upper mantle material that was relatively unmodified by subducted components. Thus, the boninite composition should largely reflect that of the sub-arc mantle. For better understanding of the mantle sources of nascent arc settings and the contributions of different components to arc melts, we analyzed Os isotope ratios (187Os/188Os) of bulk rocks and mineral separates (euhedral Cr-spinel from boninites and euhedral Cr-spinel/magnetite mixtures from tholeiites younger than 45 Ma that erupted after boninites) from the Bonin Islands and Guam. The age-corrected (initial) Os isotope ratios of the whole-rock samples (0.1179-0.2050) were more radiogenic and variable than those of the mineral separates, possibly because of contamination with crustal materials during magma ascent or alteration after emplacement. The age-corrected Os isotope ratios of euhedral Cr-spinel in boninite from the Bonin Islands (0.1187-0.1254) and from Guam (0.1220-0.1269) are unradiogenic relative to primitive mantle, and those of the Cr-spinel/magnetite mixtures from the tholeiites from the Bonin Islands are similar to or slightly more radiogenic (0.1224-0.1382). The most depleted Os isotope ratio of the Cr-spinel from boninite yielded a model Re depletion (TRD) age of 1.4 Ga, suggesting that the mantle source of the boninite experienced melt extraction prior to 1.4 Ga. The source of the boninites is interpreted to be mostly highly depleted mantle with a small contribution of slab flux arising from altered oceanic crust that has radiogenic Os components, with or without contributions from components with relatively unradiogenic Os such as volcaniclastics of oceanic island basalt affiliation or very young mid-ocean ridge basalt.
Abstract: Our current understanding of Earth’s core formation is limited by the fact that this profound event is far removed from us physically and temporally. The composition of the iron metal in the core was a result of the conditions of its formation, which has important implications for our planet’s geochemical evolution and physical history. We present experimental and theoretical evidence for the effect of pressure on iron isotopic composition, which we found to vary according to the alloy tested (FeO, FeHx, or Fe3C versus pure Fe). These results suggest that hydrogen or carbon is not the major light-element component in the core. The pressure dependence of iron isotopic composition provides an independent constraint on Earth’s core composition.
Abstract: The compound [CH3 CH2 NH3 ][Cu(HCOO)3 ] undergoes a phase transition at 357 K, from a perovskite to a diamond structure, by heating. The backward transition can be driven by pressure at room temperature but not cooling under ambient or lower pressure. The rearrangement of one long copper-formate bond, the switch of bridging-chelating mode of the formate, the alternation of N-H???O H-bonds, and the flipping of ethylammonium are involved in the transition. The strong N-H???O H-bonding probably locks the metastable diamond phase. The two phases display magnetic and electric orderings of different characters.
Abstract: Large igneous provinces (LIPs) formed by mantle superplume events have irreversibly changed their composition in the geological evolution of the Earth from high-Mg melts (during Archean and early Paleoproterozoic) to Phanerozoic-type geochemically enriched Fe-Ti basalts and picrites at 2.3 Ga. We propose that this upheaval could be related to the change in the source and nature of the mantle superplumes of different generations. The first generation plumes were derived from the depleted mantle, whereas the second generation (thermochemical) originated from the core-mantle boundary (CMB). This study mainly focuses on the second (Phanerozoic) type of LIPs, as exemplified by the mid-Paleoproterozoic Jatulian-Ludicovian LIP in the Fennoscandian Shield, the Permian-Triassic Siberian LIP, and the late Cenozoic flood basalts of Syria. The latter LIP contains mantle xenoliths represented by green and black series. These xenoliths are fragments of cooled upper margins of the mantle plume heads, above zones of adiabatic melting, and provide information about composition of the plume material and processes in the plume head. Based on the previous studies on the composition of the mantle xenoliths in within-plate basalts around the world, it is inferred that the heads of the mantle (thermochemical) plumes are made up of moderately depleted spinel peridotites (mainly lherzolites) and geochemically-enriched intergranular fluid/melt. Further, it is presumed that the plume heads intrude the mafic lower crust and reach up to the bottom of the upper crust at depths ?20 km. The generation of two major types of mantle-derived magmas (alkali and tholeiitic basalts) was previously attributed to the processes related to different PT-parameters in the adiabatic melting zone whereas this study relates to the fluid regime in the plume heads. It is also suggested that a newly-formed melt can occur on different sides of a critical plane of silica undersaturation and can acquire either alkalic or tholeiitic composition depending on the concentration and composition of the fluids. The presence of melt-pockets in the peridotite matrix indicates fluid migration to the rocks of cooled upper margin of the plume head from the lower portion. This process causes secondary melting in this zone and the generation of melts of the black series and differentiated trachytic magmas.
Abstract: Tychite Na6Mg2(CO3)4(SO3) is a rare natural Na and Mg sulfatocarbonate. It is found only as minor mineral in deposits of saline lakes in the United States, Canada, Uganda, and China. In these continental evaporites tychite has sedimentary genesis. In this study, we report the first occurrence of tychite as a crystal phase in the melt inclusions in olivine from mantle xenoliths of the Udachnaya-East kimberlite pipe. This find provides an evidence for the probability of tychite crystallization from melts; i.e., this rare sulfatocarbonate may have a magmatic origin as well.
Abstract: Experiments on the origin of the Udachnaya-East kimberlite (UEK) have been performed using a Kawai-type multianvil apparatus at 3-6.5GPa and 900-1500°C. The studied composition represents exceptionally fresh Group-I kimberlite containing (wt.%): SiO2=25.9, TiO2=1.8, Al2O3=2.8, FeO=9.0, MgO=30.1, CaO=12.7, Na2O=3.4, K2O=1.3, P2O5=1.0, Cl=0.9, CO2=9.9, and H2O=0.5. The super-solidus assemblage consists of melt, olivine (Ol), Ca-rich (26.0-30.2wt.% CaO) garnet (Gt), Al-spinel (Sp), perovskite (Pv), a CaCO3 phase (calcite or aragonite), and apatite. The low pressure assemblage (3-4GPa) also includes clinopyroxene. The apparent solidus was established between 900 and 1000°C at 6.5GPa. At 6.5GPa and 900°C Na-Ca carbonate with molar ratio of (Na+K)/Ca?0.44 was observed. The UEK did not achieve complete melting even at 1500°C and 6.5GPa, due to excess xenogenic Ol in the starting material. In the studied P-T range, the melt has a Ca-carbonatite composition (Ca#=molar Ca/(Ca+Mg) ratio=0.62-0.84) with high alkali and Cl contents (7.3-11.4wt.% Na2O, 2.8-6.7wt.% K2O, 1.6-3.4wt.% Cl). The K, Na and Cl contents and Ca# decrease with temperature. It is argued that the primary kimberlite melt at depths>200km was an essentially carbonatitic (<5wt.% SiO2), but evolved toward a carbonate-silicate composition (up to 15-20wt.% SiO2) during ascent. The absence of orthopyroxene among the run products indicates that xenogenic orthopyroxene was preferentially dissolved into the kimberlite melt. The obtained subliquidus phase assemblage (Ol+Sp+Pv+Ca-rich Gt) at P-T conditions of the UEK source region, i.e. where melt was in the last equilibrium with source rock before magma ascent, differs from the Opx-bearing peridotitic mineral assemblage of the UEK source region. This difference can be ascribed to the loss of substantial amounts of CO2 from the kimberlite magma at shallow depths, as indicated by both petrological and experimental data. Our study implies that alkali-carbonatite melt would be a liquid phase within mantle plumes generated at the core-mantle boundary or shallower levels of the mantle, enhancing the ascent velocity of the plumes. We conclude that the long-term activity of a rising hot mantle plume and associated carbonatite melt (i.e. kimberlite melt) causes thermo-mechanical erosion of the subcontinental lithosphere mantle (SCLM) roots and creates hot and deformed metasomatic regions in the lower parts of the SCLM, which corresponds to depths constrained by P-T estimates of sheared Gt-peridotite xenoliths. The sheared Gt-peridotites undoubtedly represent samples of these regions.
Abstract: Although kimberlite magma carries large amounts of mantle-derived xenocrysts and xenoliths (with sizes up to meters), this magma ascends from the Earth's mantle (> 150-250 km) to the surface in a matter of hours or days, which enables diamonds to survive. The recently proposed assimilation-fuelled buoyancy model for kimberlite magma ascent emphasizes the importance of fluid CO2 that is produced via the reactive dissolution of mantle-derived orthopyroxene xenocrysts into kimberlite melt, which initially has carbonatitic composition. Here, we use a series of high-pressure experiments to test this model by studying the interaction of orthopyroxene (Opx) with an alkali-dolomitic melt (simplified to 0.7Na2CO3 + 0.3K2CO3 + 2CaMg(CO3)2), which is close to the melt that is produced by the partial melting of a kimberlite source, at P = 3.1-6.5 GPa and T = 1200-1600 °C, i.e., up to pressures that correspond to depths (~ 200 km) from where the ascent of kimberlite magma would start. During the first set of experiments, we study the reaction between powdered Opx and model carbonate melt in a homogeneous mixture. During the second set of experiments, we investigate the mechanism and kinetics of the dissolution of Opx crystals in alkali-dolomitic melt. Depending on the P-T conditions, Opx dissolves in the alkali-dolomitic melt (CL) either congruently or incongruently via the following reactions: Mg2Si2O6 (Opx) + CaMg(CO3)2 (CL) = CaMgSi2O6 (clinopyroxene) + 2MgCO3 (CL) and Mg2Si2O6 (Opx) = Mg2SiO4 (olivine) + SiO2 (CL). The experiments confirm that the dissolution of Opx causes gradual SiO2 enrichment in the initial carbonate melt, as previously suggested. However, the assimilation of Opx by carbonate melt does not produce fluid CO2 in the experiments because the CO2 is totally dissolved in the evolved melt. Thus, our results clearly demonstrate the absence of exsolved CO2 fluid at 3.1-6.5 GPa in ascending kimberlite magma and disprove the assimilation-fuelled buoyancy model for kimberlite magma ascent in the lithospheric mantle. We alternatively suggest that the extreme buoyancy of kimberlite magma at depths of 100-250 km is an exclusive consequence of the unique physical properties (i.e., low density, ultra-low viscosity and, thus, high mobility) of the kimberlite melt, which are dictated by its carbonatitic composition.
Abstract: Here we report field, petrographic, and geochemical analyses of the southeast Missouri Avon Volcanic District intrusive rocks and present the first combined textural and geochemical evidence for the presence of a primary magmatic carbonatite phase among ultramafic dikes, pipes, and diatremes of olivine melilitite, alnöite, and calciocarbonatite. The ?13CVPDB values measured for primary calciocarbonatite as well as carbonates in olivine melilitite and alnöite rocks range from ? 3.8‰ to ? 8.2‰, which are within the typical range of mantle values and are distinct from values of the carbonate country rocks, 0.0‰ to ? 1.3‰. The carbonate oxygen isotope compositions for the intrusive lithologies are in the range of 21.5‰ to 26.2‰ (VSMOW), consistent with post-emplacement low temperature hydrothermal alteration or kinetic fractionation effects associated with decompression and devolatilization. Metasomatized country rock and breccia-contaminated igneous lithologies have carbonate ?13CVPDB values gradational between primary carbonatite values and country rock values. Unaltered sedimentary dolomite breccia and mafic spheroids entrained by calciocarbonatite and the lack of microstratigraphic crystal growth typical of carbonate replacement, also exclude the possibility of hydrothermal replacement as the cause of the magmatic-textured carbonates. Rare earth element (REE) patterns for the alnöite, olivine melilitite, and carbonatite are similar to each other with strong light REE enrichment and heavy REE depletion relative to MORB. These patterns are distinct from those of country rock rhyolite and sedimentary carbonate. These data suggest that rocks of the Avon Volcanic District represent a single ultramafic-carbonatite intrusive complex possibly derived from a single mantle source.
Russian Geology and Geophysics, Vol. 56, pp. 1701-1716.
Russia
Deposit - Grib
Abstract: New data on metasomatic processes in the lithospheric mantle in the central part of the Arkhangelsk diamondiferous province (ADP) are presented. We studied the major- and trace-element compositions of minerals of 26 garnet peridotite xenoliths from the V. Grib kimberlite pipe; 17 xenoliths contained phlogopite. Detailed mineralogical, petrographic, and geochemical studies of peridotite minerals (garnet, clinopyroxene, and phlogopite) have revealed two types of modal metasomatic enrichment of the lithospheric-mantle rocks: high temperature (melt) and low-temperature (phlogopite). Both types of modal metasomatism significantly changed the chemical composition of the peridotites. Low-temperature modal metasomatism manifests itself as coarse tabular and shapeless phlogopite grains. Two textural varieties of phlogopite show significant differences in chemical composition, primarily in the contents of TiO2, Cr2O3, FeO, Ba, Rb, and Cs. The rock-forming minerals of phlogopite-bearing peridotites differ in chemical composition from phlogopite-free peridotites, mainly in higher FeO content. Most garnets and clinopyroxenes in peridotites are the products of high-temperature mantle metasomatism, as indicated by the high contents of incompatible elements and REE pattern in these minerals. Fractional-crystallization modeling gives an insight into the nature of melts (metasomatic agents). They are close in composition to picrites of the Izhmozero field, basalts of the Tur’ino field, and carbonatites of the Mela field of the ADP. The REE patterns of the peridotite minerals make it possible to determine the sequence of metasomatic enrichment of the lithospheric mantle beneath the V. Grib kimberlite pipe.
Abstract: This paper presents new major and trace element data from 150 garnet xenocrysts from the V. Grib kimberlite pipe located in the central part of the Arkhangelsk diamondiferous province (ADP). Based on the concentrations of Cr2O3, CaO, TiO2 and rare earth elements (REE) the garnets were divided into seven groups: (1) lherzolitic “depleted” garnets (“Lz 1”), (2) lherzolitic garnets with normal REE patterns (“Lz 2”), (3) lherzolitic garnets with weakly sinusoidal REE patterns (“Lz 3”), (4) lherzolitic garnets with strongly sinusoidal REE patterns (“Lz 4”), (5) harzburgitic garnets with sinusoidal REE patterns (“Hz”), (6) wehrlitic garnets with weakly sinusoidal REE patterns (“W”), (7) garnets of megacryst paragenesis with normal REE patterns (“Meg”). Detailed mineralogical and geochemical garnet studies and modeling results suggest several stages of mantle metasomatism influenced by carbonatite and silicate melts. Carbonatitic metasomatism at the first stage resulted in refertilization of the lithospheric mantle, which is evidenced by a nearly vertical CaO-Cr2O3 trend from harzburgitic (“Hz”) to lherzolitic (“Lz 4”) garnet composition. Harzburgitic garnets (“Hz”) have probably been formed by interactions between carbonatite melts and exsolved garnets in high-degree melt extraction residues. At the second stage of metasomatism, garnets with weakly sinusoidal REE patterns (“Lz 3”, “W”) were affected by a silicate melt possessing a REE composition similar to that of ADP alkaline mica-poor picrites. At the last stage, the garnets interacted with basaltic melts, which resulted in the decrease CaO-Cr2O3 trend of “Lz 2” garnet composition. Cr-poor garnets of megacryst paragenesis (“Meg”) could crystallize directly from the silicate melt which has a REE composition close to that of ADP alkaline mica-poor picrites. P-T estimates of the garnet xenocrysts indicate that the interval of ?60-110 km of the lithospheric mantle beneath the V. Grib pipe was predominantly affected by the silicate melts, whereas the lithospheric mantle deeper than 150 km was influenced by the carbonatite melts.
Geophysical Research Letters, Vol. 43, 8, pp. 3717-3726.
Europe, Greenland
Magmatism
Abstract: Understanding the evolution of extinct ocean basins through time and space demands the integration of surface kinematics and mantle dynamics. We explore the existence, origin, and implications of a proposed oceanic slab burial ground under Greenland through a comparison of seismic tomography, slab sinking rates, regional plate reconstructions, and satellite-derived gravity gradients. Our preferred interpretation stipulates that anomalous, fast seismic velocities at 1000-1600?km depth imaged in independent global tomographic models, coupled with gravity gradient perturbations, represent paleo-Arctic oceanic slabs that subducted in the Mesozoic. We suggest a novel connection between slab-related arc mantle and geochemical signatures in some of the tholeiitic and mildly alkaline magmas of the Cretaceous High Arctic Large Igneous Province in the Sverdrup Basin. However, continental crustal contributions are noted in these evolved basaltic rocks. The integration of independent, yet complementary, data sets provides insight into present-day mantle structure, magmatic events, and relict oceans.
Geophysical Research Letters, Vol. 7, 10.1002/ 2016GL068424
Europe, Greenland
Magmatism
Abstract: Understanding the evolution of extinct ocean basins through time and space demands the integration of surface kinematics and mantle dynamics. We explore the existence, origin, and implications of a proposed oceanic slab burial ground under Greenland through a comparison of seismic tomography, slab sinking rates, regional plate reconstructions, and satellite-derived gravity gradients. Our preferred interpretation stipulates that anomalous, fast seismic velocities at 1000-1600?km depth imaged in independent global tomographic models, coupled with gravity gradient perturbations, represent paleo-Arctic oceanic slabs that subducted in the Mesozoic. We suggest a novel connection between slab-related arc mantle and geochemical signatures in some of the tholeiitic and mildly alkaline magmas of the Cretaceous High Arctic Large Igneous Province in the Sverdrup Basin. However, continental crustal contributions are noted in these evolved basaltic rocks. The integration of independent, yet complementary, data sets provides insight into present-day mantle structure, magmatic events, and relict oceans.
Geophysical Research Letters, Vol. 43, 8, pp. 3717-3726.
Europe, Greenland
Magmatism
Abstract: Understanding the evolution of extinct ocean basins through time and space demands the integration of surface kinematics and mantle dynamics. We explore the existence, origin, and implications of a proposed oceanic slab burial ground under Greenland through a comparison of seismic tomography, slab sinking rates, regional plate reconstructions, and satellite-derived gravity gradients. Our preferred interpretation stipulates that anomalous, fast seismic velocities at 1000 -1600?km depth imaged in independent global tomographic models, coupled with gravity gradient perturbations, represent paleo-Arctic oceanic slabs that subducted in the Mesozoic. We suggest a novel connection between slab-related arc mantle and geochemical signatures in some of the tholeiitic and mildly alkaline magmas of the Cretaceous High Arctic Large Igneous Province in the Sverdrup Basin. However, continental crustal contributions are noted in these evolved basaltic rocks. The integration of independent, yet complementary, data sets provides insight into present-day mantle structure, magmatic events, and relict oceans.
American Mineralogist, Vol. 101, 5, pp. 1129-1134.
Technology
Bastanesite
Abstract: Bastnaesite, [RE-CO3-OH/F] (RE = rare earth) is one of the major sources of rare earth elements found in commercial deposits at Mountain Pass, California, Bayan Obo, China, and elsewhere. Synthetic forms of bastnaesite have been explored for applications including optical devices and phosphors. Determination of thermodynamic properties of these phases is critical for understanding their origin, mining, and processing. We report the first experimental determination of formation enthalpies of several OH and F bastnaesites based on high-temperature oxide melt solution calorimetry of well-characterized synthetic samples. The formation enthalpies from binary oxides and fluorides for all the bastnaesite samples are highly exothermic, consistent with their stability in the garnet zone of the Earth’s crust. Fluoride bastnaesite, which is more abundant in nature than its hydroxide counterpart, is thermodynamically more stable. For both OH and F bastnaesite, the enthalpy of formation becomes more negative with increasing ionic radius of the RE3+ cation. This periodic trend is also observed among rare earth phosphates and several other rare earth ternary oxides. For a given RE, the formation enthalpies from binary oxides are more negative for orthophosphates than for bastnaesites, supporting the argument that monazite could have formed by reaction of bastnaesite and apatite at high temperature. The difference in formation enthalpy of monazite and bastnaesite provides insight into energetics of such reactions along the rare earth series.
Contributions to Mineralogy and Petrology, Vol. 171, 11, 24p.
Africa, South Africa
Deposit - Bellsbank
Abstract: An oceanic crustal origin is the commonly accepted paradigm for mantle-derived eclogites. However, the significance of the aluminous members of the eclogite suite, containing kyanite and corundum, has long been underrated and their role neglected in genetic models of cratonic evolution. Here, we present a geochemical and petrological study of a suite of kyanite- and corundum-bearing eclogites from the Bellsbank kimberlite, S. Africa, which originate from depths between 150 and 200 km. Although clearly of high-pressure provenance, these rocks had a low-pressure cumulative origin with plagioclase and olivine as major cumulate phases. This is shown by the very pronounced positive Eu anomalies, low REE abundances, and ? 18O values lower than the Earth’s mantle. Many chemical features are identical to modern-day troctolitic cumulates including a light REE depletion akin to MORB, but there are also distinguishing features in that the eclogites are richer in Na, Fe, and Ni. Two of the eclogites have a minimum age of ~3.2 Ga, defined by the extremely unradiogenic 87Sr/86Sr (0.7007) in clinopyroxene. Phase equilibria indicate that the parent melts were formed by partial melting below an Archean volcanic center that generated (alkali-)picritic to high-alumina tholeiitic melts from a mantle whose oxygen fugacity was lower than today. Fractional crystallization produced troctolites with immiscible sulfide melt droplets within the mafic crust. Instability of the mafic crust led to deep subduction and re-equilibration at 4 6 GPa. Phase relationships plus the presence of a sample with appreciable modal corundum but no Eu anomaly suggest that kyanite- and corundum-bearing eclogites may also originate as plagioclase-free, higher pressure cumulates of highly aluminous clinopyroxene, spinel, and olivine. This is consistent with the crystallizing phase assemblage from an olivine tholeiitic to picritic magma deeper in the Archean oceanic crust or uppermost mantle. We postulate that the magmatic and subduction processes driving modern plate tectonics already existed in the Meso- to Early Archean.
Abstract: It is known that carbon melts at temperatures around 4000 K or higher, and, therefore, this will be for the first time, when liquid carbon state formation preserved within diamond is documented in a carbon-carbonate system at the PT-conditions around 8.0 GPa and 2000 K, that is essentially far from the carbon diagram liquid field, so the newly reported liquid carbon was formed by neither fusion nor condensation. Based on a preponderance of such a strong circumstantial evidence, as morphological features of globular glass-like carbon inclusions within the globular-textured host diamond crystals resulting from liquid segregation process under synthesis conditions, it is suggested, that the produced carbon state has general properties of liquid and is formed through agglomeration alongside with diffusion process of carbon within carbonate melt solvent, and, thus, can potentially open a novel route for liquid carbon production and manufacturing of advanced high-refractory alloys and high-temperature compounds at lower than commonly accepted standard temperatures. A new model of diamond formation via metastable liquid carbon is presented.
Diamond and Related Materials, Vol. 62, pp. 42-48.
Technology
Carbon
Abstract: It is known that carbon melts at temperatures around 4000 K or higher, and, therefore, this will be for the first time, when liquid carbon state formation preserved within diamond is documented in a carbon-carbonate system at the PT-conditions around 8.0 GPa and 2000 K, that is essentially far from the carbon diagram liquid field, so the newly reported liquid carbon was formed by neither fusion nor condensation. Based on a preponderance of such a strong circumstantial evidence, as morphological features of globular glass-like carbon inclusions within the globular-textured host diamond crystals resulting from liquid segregation process under synthesis conditions, it is suggested, that the produced carbon state has general properties of liquid and is formed through agglomeration alongside with diffusion process of carbon within carbonate melt solvent, and, thus, can potentially open a novel route for liquid carbon production and manufacturing of advanced high-refractory alloys and high-temperature compounds at lower than commonly accepted standard temperatures. A new model of diamond formation via metastable liquid carbon is presented.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 14p.
Canada, Quebec
Deposit - Renard
Abstract: The Renard kimberlite cluster is located in the Monts Otish region of Quebec, Canada. A Canadian National Instrument (NI) 43-101 compliant resource statement for the Renard kimberlites 2, 3, 4 and 9 and the Lynx kimberlite dyke was first issued in 2008 followed by a Preliminary Economic Assessment and the development of a conceptual mine plan. Following a successful drill program in 2009 tbat greatly expanded the amount of kimberlite in Renard 2, a revised resource statement was issued in December 2009 comprising 23 mitlion carats of Indicated Mineral Resources and 13 million carats of Inferred Mineral Resources, a threefold increase on the previous estimate. The project is currently the focus of a second Preliminary Economic Assessment and it is expected that a full feasibility and permitting program will commence in 2010 leading to the creation of Quebec's first diamond mine by 2013
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 14p.
Mantle
Emplacement
Abstract: Various models of near-surface kimberlite pipe emplacement have been proposed over the years. These include a top-down, phreatomagmatic model, a bottom-up, embryonic pipe model and three top-down explosive dyke models. All of these models consider kimberlites as essentially the same rock type. However. different kimberlites have different pipe shapes and contain different rock types with very specific mineral assemblages and textures and therefore are likely to have been emplaced by different processes. Some authors have considered local geological differences as the principal reason for the contrasting geology but others argue that, while geological differences might contribute locally the petrographic peculiarities of particular kimberlites may be due mainly to inherent compositional differences specifically in the ratios of juvenile CO2 and H20.
Abstract: Microinclusions of high-density fluids (HDF's) occur in cloudy diamonds from the Mir and Internatsionalnaya kimberlite pipes (Malobotuobia kimberlite field, Siberian platform). These HDFs are of typical high-Mg carbonatitic composition; a few diamonds contain microinclusions that define a low-Mg carbonatitic to silicic trend. The observed variations are interpreted as resulted from mixing of two contrasting fluids derived from the partial melting mainly of carbonated peridotite (the high-Mg carbonatitic HDFs) and eclogite (silica-rich HDFs and HDFs with high Ca/(Ca + Mg + Fe)). Immiscibility of carbonatitic and silica-rich fluids provides a possible mechanism for the co-existence of the observed HDFs but needs further proof. The uniform carbon isotope composition of cloudy diamonds with high-Mg carbonatitic microinclusions from both kimberlite pipes implies a single peridotitic source.
Doklady Earth Sciences, Vol. 465, 1, pp. 1187-1190.
Russia
Deposit - Udachnaya
Abstract: The composition, structure, and morphology of iron-containing diamond-kimberlite contact sites were studied by means of scanning electron microscopy and Raman spectroscopy. The data obtained confirm the hypothesis of the similarity of mechanisms of diamond formation in nature and in experiments.
Tectonic significance and redox state of Paleoproterozoic eclogite and pyroxenite components in the Slave cratonic mantle lithosphere, Voyageur kimberlite, Arctic Canada.
Abstract: Plate tectonics plays a vital role in the evolution of our planet. Geochemical analysis of Earth’s oldest continental crust suggests that subduction may have begun episodically about 3.8 to 3.2 billion years ago, during the early Archaean or perhaps more than 3.8 billion years ago, during the Hadean. Yet, mantle rocks record evidence for modern-style plate tectonics beginning only in the late Archaean, about 3 billion years ago. Here we analyse the nitrogen abundance, as well as the nitrogen and carbon isotopic signatures of Archaean placer diamonds from the Kaapvaal craton, South Africa, which formed in the upper mantle 3.1 to 3.5 billion years ago. We find that the diamonds have enriched nitrogen contents and isotopic compositions compared with typical mantle values. This nitrogen geochemical fingerprint could have been caused by contamination of the mantle by nitrogen-rich Archaean sediments. Furthermore, the carbon isotopic signature suggests that the diamonds formed by reduction of an oxidized fluid or melt. Assuming that the Archaean mantle was more reduced than the modern mantle, we argue that the oxidized components were introduced to the mantle by crustal recycling at subduction zones. We conclude, on the basis of evidence from mantle-derived diamonds, that modern-style plate tectonics operated as early as 3.5 billion years ago.
Smit, K.V., Shirey, S.B., Stern, R.A., Steele, A., Wang, W.
Diamond growth from C-H-N-O recycled fluids in the lithosphere: Evidence from CH4 micro-inclusions and dleta 13 C-Delta 15 N-N content in Marange mixed-habit diamonds.
Abstract: Type Ib diamonds contain abundant isolated nitrogen and account for less than 0.1% of natural diamonds. This rarity is because over geological time and at temperatures typical of the cratonic lithosphere, isolated nitrogen aggregates to A centres (N pairs) and B centres (4N around a vacancy). Preservation of isolated nitrogen in natural diamonds requires either short mantle residency times or storage at temperatures <700 °C, whereas most cratonic diamonds are billions of years old and resided >1000 °C. Eclogitic sulphides in Zimmi Ib diamonds (Sierra Leone) have 650 Ma Re-Os ages, whose origin is best explained by rapid tectonic exhumation after continental collision to shallower depths in the keel prior to kimberlite eruption (Smit et al., 2016). Here we present SIMS and spectroscopic data for a new suite of Zimmi sulphide-bearing diamonds. These new data allow us to evaluate the speciation of diamond source fluids, and the defects in these diamonds that are responsible for their distinctive canary yellow colours. The combined dataset establishes the link between the spectroscopic features in Zimmi Ib diamonds and their unusual history. Low ?13C values below -15 ‰ in 3 diamonds result from source fluids that originated as organic carbon in the oceanic crust, and were recycled into the lithosphere during subduction. In particular, a trend of decreasing ?13C and N content from core to rim in a single diamond indicates closed-system growth from CH4-rich subducted fluids. Recycled origins for organic carbon supports the temporal link of Zimmi diamond formation with deep underthrusting during Neoproterozoic continental assembly, recorded in the Rokelide orogen. CL imaging of Zimmi diamonds reveals irregular growth patterns with abundant deformation lines, associated with tectonic exhumation of the diamonds. Vacancies formed by deformation were subsequently annealed to form NV centres, where the negative charge state (637 nm) is more abundant due to isolated nitrogen donating an electron. Fancy brownish-yellow to greenish-yellow colours observed in Zimmi Ib diamonds result from a combination of isolated nitrogen, deformation-related amber centres and NV centres. These colour-forming defects can all be attributed to the unique geological history of Zimmi Ib diamonds and their rapid exhumation after formation.
Abstract: Type Ib diamonds contain abundant isolated nitrogen and account for less than 0.1% of natural diamonds. This rarity is because over geological time and at temperatures typical of the cratonic lithosphere, isolated nitrogen aggregates to A centres (N pairs) and B centres (4N around a vacancy). Preservation of isolated nitrogen in natural diamonds requires either short mantle residency times or storage at temperatures <700 °C, whereas most cratonic diamonds are billions of years old and resided >1000 °C. Eclogitic sulphides in Zimmi Ib diamonds (Sierra Leone) have 650 Ma Re-Os ages, whose origin is best explained by rapid tectonic exhumation after continental collision to shallower depths in the keel prior to kimberlite eruption (Smit et al., 2016). Here we present SIMS and spectroscopic data for a new suite of Zimmi sulphide-bearing diamonds. These new data allow us to evaluate the speciation of diamond source fluids, and the defects in these diamonds that are responsible for their distinctive canary yellow colours. The combined dataset establishes the link between the spectroscopic features in Zimmi Ib diamonds and their unusual history. Low ?13C values below -15 ‰ in 3 diamonds result from source fluids that originated as organic carbon in the oceanic crust, and were recycled into the lithosphere during subduction. In particular, a trend of decreasing ?13C and N content from core to rim in a single diamond indicates closed-system growth from CH4-rich subducted fluids. Recycled origins for organic carbon supports the temporal link of Zimmi diamond formation with deep underthrusting during Neoproterozoic continental assembly, recorded in the Rokelide orogen. CL imaging of Zimmi diamonds reveals irregular growth patterns with abundant deformation lines, associated with tectonic exhumation of the diamonds. Vacancies formed by deformation were subsequently annealed to form NV centres, where the negative charge state (637 nm) is more abundant due to isolated nitrogen donating an electron. Fancy brownish-yellow to greenish-yellow colours observed in Zimmi Ib diamonds result from a combination of isolated nitrogen, deformation-related amber centres and NV centres. These colour-forming defects can all be attributed to the unique geological history of Zimmi Ib diamonds and their rapid exhumation after formation.
Earth and Planetary Science Letters, Vol. 451, pp. 241-250.
Europe, Greenland
Aillikite
Abstract: Mantle-derived CO2-rich magma ascends rapidly through the lithospheric column, supporting upward transport of large mantle-xenoliths and xenocryst (>30 vol%) loads to the (sub-)surface within days. The regional magmatism during which such pulses occur is typically well characterized in terms of general duration and regional compositional trends. In contrast, the time-resolved evolution of individual ultramafic dyke and pipe systems is largely unknown. To investigate this evolution, we performed a geochemical and speedometric analysis of xenoliths from ultramafic (aillikite) dykes in two Neoproterozoic alkaline provinces in West Greenland: 1) Sarfartôq, which overlies Archean ultra-depleted SCLM and yielded ultra-deep mineral indicators, and 2) Sisimiut, where the SCLM is refertilized and deep xenoliths (>120 km) are lacking. We focused on the rare and understudied crustal xenoliths, which preserve a rich record of melt injection. The xenoliths are derived from 25-36 km depth and were transported to the sub-surface within View the MathML source4±1h (Fe-in-rutile speedometry), during which they were exposed to the magmatic temperature of View the MathML source1,015±50°C (Zr-in-rutile thermometry). Garnet major-element speedometry shows that before the xenolith-ascent stage the lower crust had already been exposed to a variety of magmas for 700 (Sarfartôq) and 7,100 (Sisimiut) years. The Sisimiut samples contain exotic carbonate- and sulfide-rich assemblages, which occurred during the early stages of melt infiltration. Absence of such exotic assemblages and the faster magmatic development at Sarfartôq are tentatively linked to higher decarbonation kinetics in the more depleted SCLM at this location. The data reveal the so far unrecognized pre-eruptive development of ultramafic systems. This stage involves non-steady state melt-silicate interaction between ascending magmas and the immediate SCLM wall-rock, during which the composition of both is modified. The progress and duration of this interaction is strongly influenced by the composition of the SCLM. Kinetics factors describing this interaction could thus be used to model the chemistry of aillikite and similar ultramafic magmas.
Abstract: Diamonds from Dachine, French Guiana, are unique among worldwide diamond populations. The diamonds were transported to the surface in an unusual ultramafic extrusive magma with an affinity to boninite or komatiite, which was emplaced within an arc geological setting at ~ 2.2 Ga. Dachine diamonds have internal and external morphologies indicative of relatively rapid growth from carbon oversaturated fluids or melts, and exhibit internal features consistent with residence in a high-strain environment. On the basis of nitrogen (N) defects the diamonds are categorized as Type Ib-IaA. The unusually low aggregation state of N places severe constraints on the thermal history of the diamonds, effectively ruling out derivation in convecting mantle. The carbon and N isotopic compositions of Dachine diamonds are consistent with a sedimentary source of carbon, with the majority of diamonds having ?13C values < ? 25‰ and ?15N values > + 4‰. The primary carbon was presumably deposited on an early Proterozoic seafloor. Sulphide inclusions have low Ni and Cr and are comparable to lithospheric eclogitic-type sulphide inclusions. Three garnet and one clinopyroxene inclusion are also eclogitic in composition, and one garnet inclusion has a majorite component indicating an origin around 250 km depth. The silicate inclusions are highly depleted in many incompatible trace elements (e.g. LREE, Nb, Hf, Zr), and modelling indicates an eclogitic source lithology that contained a LREE-enriched trace phase such as epidote or allanite, and an HFSE-rich phase such as rutile. Four of the five inclusions are unusually enriched in Mn, as well as Ni and Co, and modelling indicates a protolith with the bulk composition of subducted normal MORB plus about 10% ferromanganese crust component. We suggest a model wherein Dachine diamonds precipitated from remobilized sedimentary carbon at the slab-mantle interface from liquids derived ultimately by deserpentinization of slab peridotite at depths of ~ 200 to 250 km. These fluids may also trigger melting in wedge peridotite, resulting in a volatile-rich ultramafic melt that transports the diamonds rapidly to the surface. The process of diamond formation and exhumation from the slab mantle interface likely occurred in a Paleoproterozoic subduction zone and over a very limited timespan, likely less than a million years.
A sublithospheric mantle, metallic liquid origin for the world's largest gem-quality diamonds.
GSA Annual Meeting, Abstract, 1p.
Technology
Type II diamonds
Abstract: Many of the world’s largest and most valuable diamonds (e.g. Cullinan, Lesedi La Rona, Star of Sierra Leone, Lesotho Promise, Koh-i-Noor) have an unusual set of physical characteristics, suggesting they may form by a unique and common mechanism. The most often noted characteristic is their nitrogen-deficient character, classifying them as Type II. In addition, these large diamonds are generally inclusion poor, irregularly shaped, and highly resorbed. The famous 3106 carat Cullinan diamond, discovered in 1905, is a prime example. These Cullinan-like Type II diamonds are especially valuable as gemstones and difficult to access for research. Furthermore, they very rarely contain any inclusions that might shed light on their geological origin. For these reasons the paragenesis of such diamonds has long remained so enigmatic that they have not been connected to the processes that form more common Type I diamonds or even any other Type II diamonds. Here we report the findings of a systematic search for inclusions among thousands of high-quality Type II diamonds, both polished gemstones and offcuts. Not only was the search successful in finding inclusions in 70 diamonds, it also revealed a recurring set of inclusions that are distinct from those of more familiar lithospheric/sublithospheric diamonds. The most abundant inclusion encountered was a metallic, Fe-Ni-C-S multi-phase assemblage, which was observed in 35 diamonds. The second most abundant inclusion type is former CaSiO3 perovskite, now retrogressed to lower-pressure minerals. The CaSiO3 phases constrain the depth of formation to deeper than 300 km. Two additional Cullinan-like Type IIa diamonds were found to have inclusions of low-Cr majoritic garnet, also indicative of a sublithospheric origin. Overall, the inclusions suggest that Cullinan-like, large, high-quality diamonds belong to a unique paragenesis with an intimate link to Fe-Ni metal in the deep mantle.
Abstract: Many of the world’s largest and most valuable diamonds (e.g. Cullinan, Lesedi La Rona, Star of Sierra Leone, Lesotho Promise, Koh-i-Noor) have an unusual set of physical characteristics, suggesting they may form by a unique and common mechanism. The most often noted characteristic is their nitrogen-deficient character, classifying them as Type II. In addition, these large diamonds are generally inclusion poor, irregularly shaped, and highly resorbed. The famous 3106 carat Cullinan diamond, discovered in 1905, is a prime example. These Cullinan-like Type II diamonds are especially valuable as gemstones and difficult to access for research. Furthermore, they very rarely contain any inclusions that might shed light on their geological origin. For these reasons the paragenesis of such diamonds has long remained so enigmatic that they have not been connected to the processes that form more common Type I diamonds or even any other Type II diamonds. Here we report the findings of a systematic search for inclusions among thousands of high-quality Type II diamonds, both polished gemstones and offcuts. Not only was the search successful in finding inclusions in 70 diamonds, it also revealed a recurring set of inclusions that are distinct from those of more familiar lithospheric/sublithospheric diamonds. The most abundant inclusion encountered was a metallic, Fe-Ni-C-S multi-phase assemblage, which was observed in 35 diamonds. The second most abundant inclusion type is former CaSiO3 perovskite, now retrogressed to lower-pressure minerals. The CaSiO3 phases constrain the depth of formation to deeper than 300 km. Two additional Cullinan-like Type IIa diamonds were found to have inclusions of low-Cr majoritic garnet, also indicative of a sublithospheric origin. Overall, the inclusions suggest that Cullinan-like, large, high-quality diamonds belong to a unique paragenesis with an intimate link to Fe-Ni metal in the deep mantle.
Geochemistry, Geophysics, Geosystems: G3, Vol. 16, 10, pp. 3555-3574.
Canada, Saskatchewan, Alberta
Rae Craton
Abstract: Reconstruction of the 3-dimensional tectonic assembly of early continents, first as Archean cratons and then Proterozoic shields, remains poorly understood. In this paper, all readily available geophysical and geochemical data are assembled in a 3-D model with the most accurate bedrock geology in order to understand better the geometry of major structures within the Rae craton of central Canada. Analysis of geophysical observations of gravity and seismic wave speed variations revealed several lithospheric-scale discontinuities in physical properties. Where these discontinuities project upward to correlate with mapped upper crustal geological structures, the discontinuities can be interpreted as shear zones. Radiometric dating of xenoliths provides estimates of rock types and ages at depth beneath sparse kimberlite occurrences. These ages can also be correlated to surface rocks. The 3.6-2.6 Ga Rae craton comprises at least three smaller continental terranes, which "cratonized" during a granitic bloom. Cratonization probably represents final differentiation of early crust into a relatively homogeneous, uniformly thin (35-42 km), tonalite-trondhjemite-granodiorite crust with pyroxenite layers near the Moho. The peak thermotectonic event at 1.86-1.7 Ga was associated with the Hudsonian orogeny that assembled several cratons and lesser continental blocks into the Canadian Shield using a number of southeast-dipping megathrusts. This orogeny metasomatized, mineralized, and recrystallized mantle and lower crustal rocks, apparently making them more conductive by introducing or concentrating sulfides or graphite. Little evidence exists of thin slabs similar to modern oceanic lithosphere in this Precambrian construction history whereas underthrusting and wedging of continental lithosphere is inferred from multiple dipping discontinuities.
Abstract: Archaean komatiites (ultramafic lavas) result from melting under extreme conditions of the Earth’s mantle. Their chemical compositions evoke very high eruption temperatures, up to 1,600 degrees Celsius, which suggests even higher temperatures in their mantle source1, 2. This message is clouded, however, by uncertainty about the water content in komatiite magmas. One school of thought holds that komatiites were essentially dry and originated in mantle plumes3, 4, 5, 6 while another argues that these magmas contained several per cent water, which drastically reduced their eruption temperature and links them to subduction processes7, 8, 9. Here we report measurements of the content of water and other volatile components, and of major and trace elements in melt inclusions in exceptionally magnesian olivine (up to 94.5?mole per cent forsterite). This information provides direct estimates of the composition and crystallization temperature of the parental melts of Archaean komatiites. We show that the parental melt for 2.7-billion-year-old komatiites from the Abitibi greenstone belt in Canada contained 30 per cent magnesium oxide and 0.6 per cent water by weight, and was depleted in highly incompatible elements. This melt began to crystallize at around 1,530 degrees Celsius at shallow depth and under reducing conditions, and it evolved via fractional crystallization of olivine, accompanied by minor crustal assimilation. As its major- and trace-element composition and low oxygen fugacities are inconsistent with a subduction setting, we propose that its high H2O/Ce ratio (over 6,000) resulted from entrainment into the komatiite source of hydrous material from the mantle transition zone10. These results confirm a plume origin for komatiites and high Archaean mantle temperatures, and evoke a hydrous reservoir in the deep mantle early in Earth’s history.
Abstract: Polycrystalline diamond aggregates (boart, framesites, diamondites) have been widely studied but their origin is poorly understood. We report the results of a study in situ of two polished fragments of fine-grained (40-400 ?m size of individual diamond grains) dense polycrystalline diamond aggregates from the Mir pipe containing visible multiple interstitial garnet inclusions. They were analyzed for major and trace elements of inclusions and one of them — for ?13C and N abundance and isotopic composition of host diamonds. These aggregates are classified as variety IX by Orlov (1977). No cavities were observed in these samples. Sixty two irregular garnet grains and one clinopyroxene inclusion were detected and analyzed in sample Mr 832. Garnets are homogeneous within single grains but variable in Mg# [100Mg/(Mg + Fe)] from 60 up to 87 and CaO contents (3.3-5.3 wt.%) among grains with a trend to negative correlation. Low Cr (550-640 ppm) confirms eclogitic (E-type) paragenesis. High Na2O contents (5.2 wt.%) of a single pyroxene inclusion are additional evidence of eclogitic nature of this sample. Wide variations in trace elements (ppm) are characteristic for garnet grains: Sr (2.7-25.6), Y (9.7-14.1), Zr (15.6-38.7) and positive Eu anomaly is present. The ?13C of diamonds within studied sample is variable (? 6.4 ÷? 9.8 ‰) as well as N abundance (75-1150 ppm) and ?15N ? 27, ? 38, ? 58 ‰. The second peridotitic (U/P-type) sample Mr 838 contains eight inclusions of Mg-rich Cr-pyropes (Mg# ~ 85, Cr2O3 3.2-3.4 wt.%) and magnesite inclusion with 4.35 wt.% FeO and 1.73 wt.% CaO. Trace element content in pyropes is relatively uniform (ppm): Sr (0.4-1.6), Y (13.2-13.4) and Zr (13.0). We conclude that heterogeneous distribution of the trace elements among garnet grains in Mr 832 and magnesite presence in Mr 838 are indicative of the effects of mantle metasomatism and rapid crystallization shortly before the eruption of the kimberlite.
Abstract: Homogeneity of a peridotitic garnet inclusion in diamond demonstrating excess in Si concentration (i.e. presence of majorite component) was investigated by TEM using FIB prepared foils. The host diamond is a low-nitrogen brown stone, which can be related to type IIa with features of strong plastic deformation. The studied sample is represented by Ca-poor Cr-pyrope of harzburgitic (H) paragenesis from Snap Lake dyke, Canada The garnet had been previously reported to contain Si = 3.16 apfu. The revised examination of the sample, resulted in detection of extremely fine-grained symplectite consisting of low Ca-orthopyroxene, clinopyroxene, Cr-spinel and coesite completely located and isolated in the inner part of the garnet crystal, which forms a sharp interface with the surrounding homogeneous garnet. XRD study confirmed the presence of the minerals constituting the symplectite. EPMA showed an identical bulk chemistry of the nanometer-sized symplectite and garnet. Further polishing of the garnet inclusion on the same surface with diamond removed the symplectite, which possibly was present as a thin lens within garnet. The remaining garnet is completely homogeneous as checked by two profiles, and contains unusually high Ni (118.2 ppm) and depleted REE patterns. Estimated PT formation conditions of this garnet are 10.8 GPa and 1450 °C within asthenosphere. Symplectite testifies partial retrograde isochemical phase transformation of the examined garnet which is suggested to be caused by decompression along with plastic deformation of diamond within the coesite stability field at T > 1000 °C and depth no less than 100 km. Because previously published studies of rare majoritic garnets composition were performed by EPMA only, it is possible that the traces of partial phase transformation (symplectite formation) could have been overlooked without additional XRD and/or TEM/AEM studies.
Abstract: Interaction between carbonatite melt and peridotite is studied experimentally by melting samples of interlayered peridotite-carbonatite-peridotite in graphite containers at 1200-1350 °C and 5.5-7.0 GPa in a split-sphere multianvil apparatus. Starting compositions are lherzolite and harzburgite, as well as carbonatite which may form in the upper part of a slab or in a plume-related source. Most experimental runs were of 150 h duration in order for equilibrium to be achieved. The interaction produced carbonatitic melts with low SiO2 (? 7 wt.%) and high alkalis. At 1200 °C, melt-peridotite interaction occurs through Mg-Ca exchange, resulting in elimination of orthopyroxene and crystallization of magnesite and clinopyroxene. At 1350 °C hybridization of the carbonatite and magnesite-bearing peridotite melts occurred with consumption of clinopyroxene and magnesite, and crystallization of orthopyroxene at MgO/CaO ? 4.3. The resulting peridotite-saturated melt has Ca# (37-50) depending on primary carbonatite composition. Compositions of silicate phases are similar to those of high-temperature peridotite but are different from megacrysts in kimberlites. CaO and Cr2O3 changes in garnet produced from the melt-harzburgite interaction at 1200 and 1350 °C perfectly match the observed trend in garnet from metasomatized peridotite of the Siberian subcontinental lithospheric mantle. K-rich carbonatite melts equilibrated with peridotite at 5.5-7.0 GPa and 1200-1350 °C correspond to high-Mg inclusions in fibrous diamond. Carbonatite melt is a weak solvent of entrained xenoliths and therefore cannot produce kimberlitic magma if temperatures are ~ 1350 °C on separation from the lithospheric peridotite source and ~ 1000 °C on eruption.
Doklady Earth Sciences, Vol. 465, 2, pp. 1262-1267.
Russia
Deposit - Udachnaya
Abstract: Study of the mechanism of carbonation and wehrlitization of harzburgite upon metasomatism by carbonatitic melts of various genesis was carried out. Experiments with durations of 60-150 h were performed at 6.3 GPa and 1200°C. The data showed that carbonatite with MgO/CaO > 0.3 percolating into the peridotitic lithosphere may provide crystallization of magnesite in it. The influence of all studied carbonatites results in wehrlitization of peridotite. The compositions of melts formed by interaction with harzburgite (?2 wt % SiO2, Ca# = 36-47) practically do not depend on the composition of the initial carbonatite. Based on the data obtained, we conclude that the formation of magnesite-bearing and magnesite-free metasomatized peridotites may have a significant influence on the CO2 regime in the further generation of kimberlitic magmas of groups I and II.
Abstract: The crystal structure of betalomonosovite, ideally Na6?4Ti4(Si2O7)2[PO3(OH)][PO2(OH)2]O2(OF), a 5.3331(7), b 14.172(2), c 14.509(2) Å, ? 103.174(2), ? 96.320(2), ? 90.278(2)°, V 1060.7(4) Å3, from the Lovozero alkaline massif, Kola peninsula, Russia, has been refined in the space group PFormula to R = 6.64% using 3379 observed (Fo > 4?F) reflections collected with a single-crystal APEX II ULTRA three-circle diffractometer with a rotating-anode generator (MoK?), multilayer optics, and an APEX-II 4K CCD detector. Electron-microprobe analysis gave the empirical formula (Na5.39Ca0.36Mn0.04Mg0.01)?5.80 (Ti2.77Nb0.48Mg0.29Fe3+0.23Mn0.20Zr0.02Ta0.01)?4(Si2.06O7)2[P1.98O5(OH)3]O2[O0.82F0.65(OH)0.53]?2, Dcalc. = 2.969 g cm?3, Z = 2, calculated on the basis of 26 (O + F) apfu, with H2O determined from structure refinement. The crystal structure of betalomonosovite is characterized by extensive cation and anion disorder: more than 50% of cation sites are partly occupied. The crystal structure of betalomonosovite is a combination of a titanium silicate (TS) block and an intermediate (I) block. The TS block consists of HOH sheets (H-heteropolyhedral, O-octahedral) and exhibits linkage and stereochemistry typical for Group IV (Ti + Mg + Mn = 4 apfu) of the TS-block minerals. The I block is a framework of Na polyhedra and P tetrahedra which ideally gives {Na2?4[PO3(OH)][PO2(OH)2]} pfu. Betalomonosovite is an Na-poor OH-bearing analogue of lomonosovite, Na10Ti4(Si2O7)2(PO4)2O4. In the betalomonosovite structure, there is less Na in the I block and in the TS block when compared to the lomonosovite structure. The OH groups occur mainly in the I block where they coordinate P and Na atoms and in the O sheet of the TS block (minor). The presence of OH groups in the I block and in the TS block is supported by IR spectroscopy and bond-valence calculations on anions. High-resolution TEM of lomonosovite shows the presence of pervasive microstructural intergrowths, accounting for the presence of signals from H2O in the infrared spectrum of anhydrous lomonosovite. More extensive lamellae in betalomonosovite suggest a topotactic reaction from lomonosovite to betalomonosovite.
Abstract: The lack of consensus on the possible range of initial kimberlite melt compositions and their evolution as they ascend through and interact with mantle and crustal wall rocks, hampers a complete understanding of kimberlite petrogenesis. Attempts to resolve these issues are complicated by the fact that kimberlite rocks are mixtures of magmatic, xenocrystic and antecrystic components and, hence, are not directly representative of their parental melt composition. Furthermore, there is a lack of direct evidence of the assimilation processes that may characterise kimberlitic melts during ascent, which makes understanding their melt evolution difficult. In this contribution we provide novel constraints on the interaction between precursor kimberlite melts and lithospheric mantle wall rocks. We present detailed textural and geochemical data for a carbonate-rich vein assemblage that traverses a garnet wehrlite xenolith [equilibrated at ~ 1060 °C and 43 kbar (~ 140-145 km)] from the Bultfontein kimberlite (Kimberley, South Africa). This vein assemblage is dominated by Ca-Mg carbonates, with subordinate oxide minerals, olivine, sulphides, and apatite. Vein phases have highly variable compositions indicating formation under disequilibrium conditions. Primary inclusions in the vein minerals and secondary inclusion trails in host wehrlite minerals contain abundant alkali-bearing phases (e.g., Na-K bearing carbonates, Mg-freudenbergite, Na-bearing apatite and phlogopite). The Sr-isotope composition of vein carbonates overlaps those of groundmass calcite from the Bultfontein kimberlite, as well as perovskite from the other kimberlites in the Kimberley area. Clinopyroxene and garnet in the host wehrlite are resorbed and have Si-rich reaction mantles where in contact with the carbonate-rich veins. Within some veins, the carbonates occur as droplet-like, globular segregations, separated from a similarly shaped Si-rich phase by a thin meniscus of Mg-magnetite. These textures are interpreted to represent immiscibility between carbonate and silicate melts. The preservation of reaction mantles, immiscibility textures and disequilibrium in the vein assemblage, suggests quenching, probably triggered by entrainment and rapid transport toward the Earth's surface in the host kimberlite magma. Based on the Sr-isotope systematics of vein carbonate minerals, and the close temporal relationship between carbonate-rich metasomatism and kimberlite magmatism, we suggest that the carbonate-rich vein assemblage was produced by the interaction between a melt genetically related to the Bultfontein kimberlite and wehrlitic mantle wall rock. If correct, this unique xenolith sample provides a rare snapshot of the assimilation processes that might characterise parental kimberlite melts during their ascent through the lithospheric mantle.
Contributions to Mineralogy and Petrology, Vol. 171, 12p.
Mantle
Carbonatite
Abstract: Carbonatites host some unique ore deposits, especially rare earth elements (REE). Hydrothermal fluids have been proposed to play a significant role in the concentration and transport of REE and other rare metals in carbonatites, but experimental constraints on fluid-melt equilibria in carbonatitic systems are sparse. Here we present an experimental study of trace element (REE, Ba, Sr, Mo and W) partitioning between hydrous fluids and carbonatitic melts, bearing on potential hydrothermal activity associated with carbonatite ore-forming systems. The experiments were performed on mixtures of synthetic carbonate melts and aqueous fluids at 700-800 °C and 100-200 MPa using rapid-quench cold-seal pressure vessels and double-capsule assemblages with diamond traps for analyzing fluid precipitates in the outer capsule. Starting mixtures were composed of Ca, Mg and Na carbonates spiked with trace elements. Small amounts of F or Cl were added to some of the mixtures to study the effects of halogens on the element distribution. The results show that REE, Ba, Sr, Mo and W all preferentially partition into carbonatite melt and have fluid-melt distribution coefficients (D f/m) below unity. The REE partitioning is slightly dependent on the major element (Ca, Mg and Na) composition of the starting mixtures, and it is influenced by temperature, pressure, and the presence of halogens. The fluid-melt D values of individual REE vary from 0.02 to 0.15 with Df/mLu being larger than Df/mLa by a factor of 1.1-2. The halogens F and Cl have strong and opposite effects on the REE partitioning. Fluid-melt D REE are about three times higher in F-bearing compositions and ten times lower in Cl-bearing compositions than in halogen-free systems. Df/mW and Df/mMo are the highest among the studied elements and vary between 0.6 and 0.7; Df/mBa is between 0.05 and 0.09, whereas Df/mSr is at about 0.01-0.02. The results imply that carbonatite-related REE deposits were probably formed by fractional crystallization of carbonatitic melts rather than from exsolved hydrothermal fluids. The same appears to be true for a carbonatite-related Mo deposit recently discovered in China.
Physics and Chemistry of Minerals, Vol. 42, pp. 817-824.
Mantle
Carbonatite, diamond genesis
Abstract: Carbonatic components of parental melts of the deeper mantle diamonds are inferred from their primary inclusions of (Mg, Fe, Ca, Na)-carbonate minerals trapped at PT conditions of the Earth’s transition zone and lower mantle. PT phase diagrams of MgCO3-FeCO3-CaCO3-Na2CO3 system and its ternary MgCO3-FeCO3-Na2CO3 boundary join were studied at pressures between 12 and 24 GPa and high temperatures. Experimental data point to eutectic solidus phase relations and indicate liquidus boundaries for completely miscible (Mg, Fe, Ca, Na)- and (Mg, Fe, Ca)-carbonate melts. PT fields for partial carbonate melts associated with (Mg, Fe)-, (Ca, Fe, Na)-, and (Na2Ca, Na2Fe)-carbonate solid solution phases are determined. Effective nucleation and mass crystallization of deeper mantle diamonds are realized in multicomponent (Mg, Fe, Ca, Na)-carbonatite-carbon melts at 18 and 26 GPa. The multicomponent carbonate systems were melted at temperatures that are lower than the geothermal ones. This gives an evidence for generation of diamond-parental carbonatite melts and formation of diamonds at the PT conditions of transition zone and lower mantle.
International Geology Review, Vol. 58, 13, pp. 1596-1615.
India
Boninites
Abstract: Nd-isotope and lithogeochemistry of an early Palaeoproterozoic high-Si high-Mg boninite -norite (BN) suite of rocks from the southern Bastar craton, central India, are presented to understand their nature, origin, and tectonic setting of emplacement. Various types of evidence, such as field relationships, radiometric metamorphic ages, and the global distribution of BN magmatism, suggest emplacement in an intracratonic rift setting, commonly around 2.4 -2.5 Ga. On the basis of geochemistry these high-Si high-Mg rocks are classified as high-Ca boninites, high-Mg norites, and high-Mg diorites. Nd-isotope data indicate that the high-Mg norite and the high-Mg diorite samples are similar, whereas the high-Ca boninites have a different isotopic character. The high-Mg norite and the high-Mg diorite samples have younger TDM model ages than the high-Ca boninites. Geochemical and Nd-isotopic characteristics of the studied rocks indicate some prospect of crustal contamination; however, the possibility of mantle metasomatism during ancient subduction event cannot be ignored. Trace-element modelling suggests that the high-Ca boninites may have crystallized from a magma generated by a comparatively greater percentage of melting of a lherzolite mantle source than the source for the other two varieties. Furthermore, the high-Ca boninite rocks are most likely derived from an Archaean subduction process (the Whundo-type), whereas the other two types are the products of the interaction of subduction-modified refractory mantle wedge and a plume, around the Neoarchaean -Palaeoproterozoic boundary. The emplacement of the high-Mg norites and the high-Mg diorites may be linked to crustal thickening and associated cratonization at the end of the Archaean.
Journal of the Russell Society, Vol. 18, pp. 24-45.
Europe, United Kingdom
History
Abstract: The presence of quartz crystals in t he soils around Buxton has been known for centuries, and at one time theses so-called 'Buxton Diamonds' were, from published sources, apparently realtively abundant, and well-knwn to both visitors and to commentators. However, few specimens survive in museum collections, and there is considerable confusion in published accounts as to what exactly constitutes a 'Buxton Diamond'. No satisfactory description or explanation of their origin r occurrence has hitherto been published. Attractive specimens of quartz and amethyst are known from various occurrences in the Peak District, associated with igneous rocks, but these are not true 'Buxton Diamonds' . This paper presents the history of 'Buxton Diamonds', and confirms the occurrence of these, sometime highly attractive, crystals of quartz in the limestone of Diamond Hill and the surrounding area.
Geostandards and Geoanalytical Research, in press available
Technology
REE mass fractions
Abstract: Olivine offers huge, largely untapped, potential for improving our understanding of magmatic and metasomatic processes. In particular, a wealth of information is contained in rare earth element (REE) mass fractions, which are well studied in other minerals. However, REE data for olivine are scarce, reflecting the difficulty associated with determining mass fractions in the low ng g?1 range and with controlling the effects of LREE contamination. We report an analytical procedure for measuring REEs in olivine using laser ablation quadrupole-ICP-MS that achieved limits of determination (LOD) at sub-ng g?1 levels and biases of ~ 5-10%. Empirical partition coefficients (D values) calculated using the new olivine compositions agree with experimental values, indicating that the measured REEs are structurally bound in the olivine crystal lattice, rather than residing in micro-inclusions. We conducted an initial survey of REE contents of olivine from mantle, metamorphic, magmatic and meteorite samples. REE mass fractions vary from 0.1 to double-digit ng g?1 levels. Heavy REEs vary from low mass fractions in meteoritic samples, through variably enriched peridotitic olivine to high mass fractions in magmatic olivines, with fayalitic olivines showing the highest levels. The variable enrichment in HREEs demonstrates that olivine REE patterns have petrological utility.
Abstract: The outermost layer of the solid Earth consists of relatively rigid plates whose horizontal motions are well described by the rules of plate tectonics. Yet, the thickness of these plates is poorly constrained, with different methods giving widely discrepant results. Here a recently developed procedure to derive lithospheric thickness from seismic tomography with a simple thermal model is discussed. Thickness is calibrated such that the average as a function of seafloor age matches the theoretical curve for half-space cooling. Using several recent tomography models, predicted thickness agrees quite well with what is expected from half-space cooling in many oceanic areas younger than ? 110 Myr. Thickness increases less strongly with age for older oceanic lithosphere, and is quite variable on continents, with thick lithosphere up to ? 250 km inferred for many cratons. Results are highly correlated for recent shear-wave tomography models. Also, comparison to previous approaches based on tomography shows that results remain mostly similar in pattern, although somewhat more variable in the mean value and amount of variation. Global correlations with and between lithosphere thicknesses inferred from receiver functions or heat flow are much lower. However, results inferred from tomography and elastic thickness are correlated highly, giving additional confidence in these patterns of thickness variations, and implying that tomographically inferred thickness may correlate with depth-integrated strength. Thermal scaling from seismic velocities to temperatures yields radial profiles that agree with half-space cooling over large parts of their depth range, in particular for averaged profiles for given lithosphere thickness ranges. However, strong deviations from half-space cooling profiles are found in thick continental lithosphere above depth ? 150 km, most likely due to compositional differences.
Abstract: Abundant multiphase solid inclusions (MSI) were found in garnet in an ultrahigh-pressure (UHP) paragneiss from the Kokchetav complex, Kazakhstan. The MSI are composed of mineral associations that include rock-forming and accessory minerals, which crystallized during exhumation. We present experimental and analytical protocols for how such inclusions can be homogenized to glass and analysed for major and trace elements. After homogenization we identified two types of glass. One type is present in garnet porphyroblasts in the melanocratic part of the sample and represents a high-pressure melt formed close to peak conditions of >45 kbar, 1000°C. These inclusions are characterized by high concentrations of light rare earth elements (LREE), Th and U. Extraction of these melts resulted in a pronounced depletion of the Kokchetav gneisses in those elements. Measured partition coefficients of large ion lithophile elements (LILE) between phengite inclusions and melt inclusions are DRb?=?1•9-2•5, DBa?=?1•1-6•9 and DCs?=?0•6-0•8, resulting in limited depletion of these elements during partial melting in the presence of phengite. The Nb concentration in melts (27?ppm) is about double that in the restite (15?ppm), indicating slightly incompatible behaviour during UHP anatexis, despite the presence of residual accessory rutile and phengite. A second type of inclusion occurs in garnet from the leucocratic part of the rock and represents a late-stage melt formed during exhumation at 650-750°C and crustal pressures. These inclusions are characterized by low LREE and Nb and high U. Zircon domains formed during high-temperature melting are characterized by high Ti content (100-300?ppm) and unfractionated Th/U (0•4-0•8), whereas the low-temperature domains display low Ti (10?ppm) and Th/U (0•08). The composition of UHP melts with moderate enrichment in LILE, no depletion in Nb and extreme enrichment in LREE and Th is remarkably different from the trace element signature of arc basalts, arguing against involvement of this type of melting in the generation of arc crust. The composition of the UHP melt inclusions is similar to that of melt inclusions from HP crustal xenoliths from Pamir and also to some shoshonites from Tibet. UHP anatexis, as observed in the Kokchetav massif, might be related to the formation of shoshonitic alkaline igneous rocks, which are common in collisional settings.
Abstract: The Barchi-Kol terrain is a classic locality of ultrahigh-pressure (UHP) metamorphism within the Kokchetav metamorphic belt. We provide a detailed and systematic characterization of four metasedimentary samples using dominant mineral assemblages, mineral inclusions in zircon and monazite, garnet zonation with respect to major and trace elements, and Zr-in-rutile and Ti-in-zircon temperatures. A typical diamond-bearing gneiss records peak conditions of 49 ± 4 kbar and 950-1000 °C. Near isothermal decompression of this rock resulted in the breakdown of phengite associated with a pervasive recrystallization of the rock. The same terrain also contains mica schists that experienced peak conditions close to those of the diamond-bearing rocks, but they were exhumed along a cooler path where phengite remained stable. In these rocks, major and trace element zoning in garnet has been completely equilibrated. A layered gneiss was metamorphosed at UHP conditions in the coesite field, but did not reach diamond-facies conditions (peak conditions: 30 kbar and 800-900 °C). In this sample, garnet records retrograde zonation in major elements and also retains prograde zoning in trace elements. A garnet-kyanite-micaschist that reached significantly lower pressures (24 ± 2 kbar, 710 ± 20 °C) contains garnet with major and trace element zoning. The diverse garnet zoning in samples that experienced different metamorphic conditions allows to establish that diffusional equilibration of rare earth element in garnet likely occurs at ~900-950 °C. Different metamorphic conditions in the four investigated samples are also documented in zircon trace element zonation and mineral inclusions in zircon and monazite. -Pb geochronology of metamorphic zircon and monazite domains demonstrates that prograde (528-521 Ma), peak (528-522 Ma), and peak to retrograde metamorphism (503-532 Ma) occurred over a relatively short time interval that is indistinguishable from metamorphism of other UHP rocks within the Kokchetav metamorphic belt. Therefore, the assembly of rocks with contrasting P-T trajectories must have occurred in a single subduction-exhumation cycle, providing a snapshot of the thermal structure of a subducted continental margin prior to collision. The rocks were initially buried along a low geothermal gradient. At 20-25 kbar they underwent near isobaric heating of 200 °C, which was followed by continued burial along a low geothermal gradient. Such a step-wise geotherm is in good agreement with predictions from subduction zone thermal models.
Bulletin of the Russian Academy of Sciences. Physics ** IN ENG, Vol. 80, 1, pp. 74-77.
South America, Brazil
Diamond formation
Abstract: Luminescence kinetics in the temperature range of 80 480 K and the red region of the spectrum is studied for Brazilian diamonds. Components with decay time constants of 23 and 83 ns are observed at room temperature after being excited by laser radiation with wavelengths of 375 and 532 nm, which differs considerably from the data published earlier for the luminescence kinetics of NV 0- and NV -centers.
Abstract: We want to know when plate tectonics began and will consider any important Earth feature that shows significant temporal evolution. Kimberlites, the primary source of diamonds, are rare igneous features. We analyze their distribution throughout Earth history; most are young (?95% are younger than 0.75 Ga), but rare examples are found as far back as the Archean (older than 2.5 Ga). Although there are differing explanations for this age asymmetry (lack of preservation, lack of exposure, fewer mantle plumes, or lack of old thick lithosphere in the Archean and Proterozoic), we suggest that kimberlite eruptions are a consequence of modern-style plate tectonics, in particular subduction of hydrated oceanic crust and sediments deep into the mantle. This recycling since the onset of modern-style plate tectonics ca. 1 Ga has massively increased mantle CO2 and H2O contents, leading to the rapid and explosive ascent of diamond-bearing kimberlite magmas. The age distribution of kimberlites, combined with other large-scale tectonic indicators that are prevalent only in the past ?1 Ga (blueschists, glaucophane-bearing eclogites; coesite- or diamond-bearing ultrahigh-pressure metamorphic rocks; lawsonite-bearing metamorphic rocks; and jadeitites), indicates that plate tectonics, as observed today, has only operated for <25% of Earth history.
Contributions to Mineralogy and Petrology, Vol. 171, 7, 9p.
Mantle
Carbonatite, kimberlite
Abstract: Kimberlites are rare diamond-bearing volcanic rocks that originate as melts in the Earth’s mantle. The original composition of kimberlitic melt is poorly constrained because of mantle and crustal contamination, exsolution of volatiles during ascent, and pervasive alteration during and after emplacement. One recent model (Russell et al. in Nature 481(7381):352 -356, 2012. doi:10.1038/nature10740) proposes that kimberlite melts are initially carbonatitic and evolve to kimberlite during ascent through continuous assimilation of orthopyroxene and exsolution of CO2. In high-temperature, high-pressure experiments designed to test this model, assimilation of orthopyroxene commences between 2.5 and 3.5 GPa by a reaction in which orthopyroxene reacts with the melt to form olivine, clinopyroxene, and CO2. No assimilation occurs at 3.5 GPa and above. We propose that the clinopyroxene produced in this reaction can react with the melt at lower pressure in a second reaction that produces olivine, calcite, and CO2, which would explain the absence of clinopyroxene phenocrysts in kimberlites. These experiments do not confirm that assimilation of orthopyroxene for the entirety of kimberlite ascent takes place, but rather two reactions at lower pressures (<3.5 GPa) cause assimilation of orthopyroxene and then clinopyroxene, evolving carbonatitic melts to kimberlite and causing CO2 exsolution that drives rapid ascent.
Contributions to Mineralogy and Petrology, in press available 9p.
Technology
Petrology
Abstract: Kimberlites are rare diamond-bearing volcanic rocks that originate as melts in the Earth’s mantle. The original composition of kimberlitic melt is poorly constrained because of mantle and crustal contamination, exsolution of volatiles during ascent, and pervasive alteration during and after emplacement. One recent model (Russell et al. in Nature 481(7381):352-356, 2012. doi:10.1038/nature10740) proposes that kimberlite melts are initially carbonatitic and evolve to kimberlite during ascent through continuous assimilation of orthopyroxene and exsolution of CO2. In high-temperature, high-pressure experiments designed to test this model, assimilation of orthopyroxene commences between 2.5 and 3.5 GPa by a reaction in which orthopyroxene reacts with the melt to form olivine, clinopyroxene, and CO2. No assimilation occurs at 3.5 GPa and above. We propose that the clinopyroxene produced in this reaction can react with the melt at lower pressure in a second reaction that produces olivine, calcite, and CO2, which would explain the absence of clinopyroxene phenocrysts in kimberlites. These experiments do not confirm that assimilation of orthopyroxene for the entirety of kimberlite ascent takes place, but rather two reactions at lower pressures (<3.5 GPa) cause assimilation of orthopyroxene and then clinopyroxene, evolving carbonatitic melts to kimberlite and causing CO2 exsolution that drives rapid ascent.
Abstract: This paper is an updated overview, including many new data, of what is known about Italian alkaline-carbonatite complexes, plus a new description of a carbothermal residua-related district, and its potential for mineral deposits. The Italian carbonatite occurrences can be divided into two belts. The first is a 350 km long and 75 km wide belt along the Apennines mountain range mainly with primary extrusive carbonatites generally from monogenic volcanoes and from the Vulture volcanic complex; the second belt is 60 km long and 20 km wide in the Northern Latium region in which carbothermal residua carbonatites and fluorite mineralisation deposited by high-temperature fluids rich in CO2, SO2 and fluorine are occurring in caldera volcanoes. Several of the raw materials, such as Light Rare Earth Elements, vanadium, niobium, zirconium, fluorite and phosphate are identified as critical as well as other commodities, occur in Italian carbonatites and alkaline rocks. At the Pianciano quarry (Bracciano) fluorite-rich ore (fluor-ore = fluorite in a mineralised gangue) is actually exploited as flux for cement, but Rare Earth Elements (+ V) could be a notable by-product (300,000 metric tonnes, equivalent to 4.2% of European resources). Pyrochlore, monazite, apatite, and britholite bearing subvolcanic rocks in ejecta from the Vulture volcano are of a near-economic grade, but their geological constraints are not known. A conceptual framework of combined geological and geochemical data improves the general understanding of this regional magmatic system, aimed at laying the foundations of a future geological model disclosing unrecognised potential exploration targets. However, this paper is not intended for direct use by the exploration industry; rather it is principally aimed at mineralogists and petrologists who could develop strategies for the identification of unexposed or unrecognised deposits.
Abstract: Among orogenic peridotites, dunites suffer the weakest crustal metasomatism at the slab-mantle interface and are the best lithology to trace the origins of orogenic peridotites and their initial geodynamic processes. Petrological and geochemical investigations of the Lijiatun dunites from the Sulu ultrahigh-pressure (UHP) terrane indicate a complex petrogenetic history involving melt extraction and multistage metasomatism (carbonatitic melt and slab-derived fluid). The Lijiatun dunites consist mainly of olivine (Fo = 92.0-92.6, Ca = 42-115 ppm), porphyroblastic orthopyroxene (En = 91.8-92.8), Cr-spinel (Cr# = 50.4-73.0, TiO2 < 0.2 wt.%) and serpentine. They are characterized by refractory bulk-rock compositions with high MgO (45.31-47.07 wt.%) and Mg# (91.5-91.9), and low Al2O3 (0.48-0.70 wt.%), CaO (0.25-0.44 wt.%) and TiO2 (< 0.03 wt.%) contents. Whole-rock platinum group elements (PGE) are similar to those of cratonic mantle peridotites and Re-Os isotopic data suggest that dunites formed in the early Proterozoic (~ 2.2 Ga). These data indicate that the Lijiatun dunites were the residues of ~ 30% partial melting and were derived from the subcontinental lithospheric mantle (SCLM) beneath the North China craton (NCC). Subsequent carbonatitic metasomatism is characterized by the formation of olivine-rich (Fo = 91.6-92.6, Ca = 233-311 ppm), clinopyroxene-bearing (Mg# = 95.9-96.7, Ti/Eu = 104-838) veins cutting orthopyroxene porphyroblasts. Based on the occurrence of dolomite, mass-balance calculation and thermodynamic modeling, carbonatitic metasomatism had occurred within the shallow SCLM (low-P and high-T conditions) before dunites were incorporated into the continental subduction channel. These dunites then suffered weak metasomatism by slab-derived fluids, forming pargasitic amphibole after pyroxene. This work indicates that modification of the SCLM beneath the eastern margin of the NCC had already taken place before the Triassic continental subduction. Orogenic peridotites derived from such a lithospheric mantle wedge may be heterogeneously modified prior to their incorporation into the subduction channel, which would set up a barrier for investigation of the mass transfer from the subducted crust to the mantle wedge through orogenic peridotites.
Abstract: Among orogenic peridotites, dunites suffer the weakest crustal metasomatism at the slab-mantle interface and are the best lithology to trace the origins of orogenic peridotites and their initial geodynamic processes. Petrological and geochemical investigations of the Lijiatun dunites from the Sulu ultrahigh-pressure (UHP) terrane indicate a complex petrogenetic history involving melt extraction and multistage metasomatism (carbonatitic melt and slab-derived fluid). The Lijiatun dunites consist mainly of olivine (Fo = 92.0-92.6, Ca = 42-115 ppm), porphyroblastic orthopyroxene (En = 91.8-92.8), Cr-spinel (Cr# = 50.4-73.0, TiO2 < 0.2 wt.%) and serpentine. They are characterized by refractory bulk-rock compositions with high MgO (45.31-47.07 wt.%) and Mg# (91.5-91.9), and low Al2O3 (0.48-0.70 wt.%), CaO (0.25-0.44 wt.%) and TiO2 (< 0.03 wt.%) contents. Whole-rock platinum group elements (PGE) are similar to those of cratonic mantle peridotites and Re-Os isotopic data suggest that dunites formed in the early Proterozoic (~ 2.2 Ga). These data indicate that the Lijiatun dunites were the residues of ~ 30% partial melting and were derived from the subcontinental lithospheric mantle (SCLM) beneath the North China craton (NCC). Subsequent carbonatitic metasomatism is characterized by the formation of olivine-rich (Fo = 91.6-92.6, Ca = 233-311 ppm), clinopyroxene-bearing (Mg# = 95.9-96.7, Ti/Eu = 104-838) veins cutting orthopyroxene porphyroblasts. Based on the occurrence of dolomite, mass-balance calculation and thermodynamic modeling, carbonatitic metasomatism had occurred within the shallow SCLM (low-P and high-T conditions) before dunites were incorporated into the continental subduction channel. These dunites then suffered weak metasomatism by slab-derived fluids, forming pargasitic amphibole after pyroxene. This work indicates that modification of the SCLM beneath the eastern margin of the NCC had already taken place before the Triassic continental subduction. Orogenic peridotites derived from such a lithospheric mantle wedge may be heterogeneously modified prior to their incorporation into the subduction channel, which would set up a barrier for investigation of the mas
Abstract: A team of researchers recently discovered an ancient relic hidden within Earth: a tectonic plate resting beneath the southern Indian Ocean. Scientists have found other tectonic plates that sank below Eurasia and North America, but here Simmons et al. describe the unique structure of this newly discovered slab, which they named the Southeast Indian Slab (SEIS). The slab has at least one feature scientists have rarely seen before: It maintains its slab-like structure all the way from the upper mantle near Earth’s crust down to the region where the mantle meets the planet’s superheated core. The Farallon plate beneath North America is a well-known example of this—but it was expected to exist and sank much more recently than the SEIS. In addition, not only does the SEIS traverse the entire mantle, but it also becomes more vertical along one end, so much so that it stands almost vertically between the crust and core along the eastern edge, whereas the western portion is more horizontal. Researchers can make out structures beneath Earth’s crust by examining the speed at which seismic waves generated by earthquakes and similar Earth-shattering events—known as P and S waves—travel through Earth. Here the researchers used wave data from 12,607 seismic events dating back to the 1960s, collected by 7783 seismic stations around the world, to develop the model that identified the ancient slab. Once this tectonic slab was identified, the team looked at the region’s tectonic history over millions of years to determine where and when this plate was on the surface. They determined that the slab was once along the eastern portion of the early supercontinent of Gondwana. Then, sometime during the Triassic or Jurassic period, which stretched from 250 million years ago to 145 million years ago, the slab plunged underneath another plate. They further concluded that the subduction, or the sinking of the Southeast Indian Slab beneath another plate, terminated around 130 to 140 million years ago in the Mesozoic era, around the same time that the tectonic plates under eastern Gondwana began to separate and split up the continent. Tectonic plates usually sink down into the mantle at a rate of about 1 centimeter per year or more; they don’t necessarily melt but instead bunch up at the base of the mantle and eventually assimilate or become undetectable as their temperature increases. However, if the researchers accurately estimated the timing of their newly discovered slab’s subduction, this slab must have stalled in a transition zone before descending deeper down into the mantle, allowing the slab to persist in the mantle longer than any other known plate.
Abstract: The last of a group of dense minerals that make up much of Earth’s crust and upper mantle has been found tucked inside a meteorite that slammed into Australia 135 years ago. The newly discovered mineral, a variety of majorite, is potentially abundant in sinking tectonic plates and could help illuminate the behavior of the deep Earth, its discoverers say. ach identical component of this mineral contains 32 magnesium atoms, 32 silicon atoms and 96 oxygen atoms arranged in a distorted cube. Natural samples of MgSiO3 tetragonal garnet, the mineral’s scientific moniker, had eluded scientists since the mineral was first artificially produced in 1985. aotaka Tomioka, a mineralogist at the Kochi Institute for Core Sample Research in Japan, and colleagues discovered 0.5-micrometer-wide grains of the mineral in a slice of the 19th century meteorite. While many minerals found in meteorites form when slamming into Earth, the new mineral formed in space when two asteroids collided at a relative speed of about 2 kilometers per second, the researchers report online March 25 in Science Advances. ne challenge remains for the researchers: As discoverers of the mineral, they now get to name it.
Abstract: A type of pink pyrope garnet containing vanadium and chromium, believed to have been mined in Tanzania, appeared at the 2015 Tucson shows. The material shows a noticeable color difference from purplish pink under incandescent light (A) to purple under daylight-equivalent light (D65). This study reports a quantitative analysis of the difference in color between the two lighting conditions, based on the use of high-quality visible absorption spectroscopy to calculate CIELAB 1976 colorimetric coordinates. L*, a*, and b* colorimetric parameters were calculated for a wide range of path lengths as extrapolated from visible absorption spectra of thinner samples. Using this method, the path length of light through the stone that produces the optimal color difference can be calculated. This path length can then be used to determine the optimal depth range to maximize color change for a round brilliant of a specific material. The pink pyrope studied here can be designated as "color-change" garnet according to certain classification schemes proposed by other researchers. In many of these schemes, however, the material fails to exceed the minimum requirements for quantitative color difference and hue angle difference to be described as "color-change." Nonetheless, there is no simple solution to the problem of applying color coordinates to classify color-change phenomena. Also presented is a method by which spectra can be corrected for reflection loss and accurately extrapolated to stones with various path lengths.
Mineralogy and Petrology, Vol. 110, 2, pp. 399-420.
Indonesia
Megacrysts
Abstract: Zircon megacrysts (± gem corundum) appear in basalt fields of Indo-Pacific origin over a 12,000 km zone (ZIP) along West Pacific continental margins. Age-dating, trace element, oxygen and hafnium isotope studies on representative zircons (East Australia-Asia) indicate diverse magmatic sources. The U-Pb (249 to 1 Ma) and zircon fission track (ZFT) ages (65 to 1 Ma) suggest thermal annealing during later basalt transport, with?
Abstract: The Archean Eon witnessed the production of early continental crust, the emergence of life, and fundamental changes to the atmosphere. The nature of the first continental crust, which was the interface between the surface and deep Earth, has been obscured by the weathering, erosion, and tectonism that followed its formation. We used Ni/Co and Cr/Zn ratios in Archean terrigenous sedimentary rocks and Archean igneous/metaigneous rocks to track the bulk MgO composition of the Archean upper continental crust. This crust evolved from a highly mafic bulk composition before 3.0 billion years ago to a felsic bulk composition by 2.5 billion years ago. This compositional change was attended by a fivefold increase in the mass of the upper continental crust due to addition of granitic rocks, suggesting the onset of global plate tectonics at ~3.0 billion years ago.
India's fast Mesozoic drift linked to continental mantle lithosphere delamination: new insights from (U-Th)/He thermochronology of Dharwar craton kimberlites.
Abstract: Neoproterozoic kimberlite, ultramafic lamprophyre, and carbonatite magmatic activity was widespread across the Canadian-Greenland Shield. Models to explain the preponderance of this deeply-derived CO2-rich magmatism between 680-540 Ma range from impingement of multiple mantle plumes to rifting activity linked to the breakout of the Laurentian plate from the Rodinia supercontinent configuration. We add to the debate about the origin of kimberlite magmas and evaluate possible mantle sources of the 655 Ma ‘diamond-rich’ Renard (new SIMS U/Pb perovskite ages) and 629 Ma ‘barren’ Wemindji kimberlites on the eastern Superior craton in Quebec, Canada. Our Sr-Nd-Hf and carbon isotope data (87Sr/86Sri = 0.70241-0.70442; ?Ndi = + 0.2 to + 4.8; ?Hfi = + 0.3 to + 6.5; ?13C = ? 5.6 to ? 3.9‰) suggest a common and moderately depleted convecting upper mantle source region for both the Renard and Wemindji kimberlites, which occur 400 km apart in the interior of the Superior craton. In contrast, the low Os isotope ratios (187Os/188Osi = 0.11078-0.12620; ?Osi = ? 13.7 to ? 1.6) and unfractionated chondritic relative HSE abundances (Os, Ir, Ru, Pt, Pd, Re) indicate significant involvement of ancient refractory cratonic mantle material in kimberlite magma formation. Our model calculations suggest that for both the diamond-rich Renard and the barren Wemindji kimberlite magmas up to 30% of the Os was derived from refractory cratonic peridotites. This material might have been assimilated by originally more CO2-rich carbonated silicate melts derived from the asthenosphere. We also show that the geochemical and Sr-Nd-Hf-Os isotopic compositions of the Renard and Wemindji kimberlites do not require significant input from melts derived from olivine-poor cratonic mantle lithologies such as MARID-type veins and pyroxenites/eclogites. This contrasts with the petrogenesis of deeply-derived volatile-rich potassic magmas found along the peripheries of cratons (e.g., ultramafic lamprophyres, kamafugites, and olivine lamproites), a setting where abundant non-peridotitic components have been added to the lithospheric mantle over the course of continent evolution. Provided that CO2-rich melts, such as proto-kimberlites, occur near the solidus of volatile-fluxed peridotites, no excess mantle heat is required in their formation. This important but often overlooked constraint, together with the observation that there exist no spatial or temporal relationships between the Superior craton kimberlites and Large Igneous Provinces during the Late Neoproterozoic, suggests that kimberlite magmatic activity was tectonically controlled. In our preferred model, ubiquitous CO2-rich proto-kimberlite melts form during volatile-controlled redox melting processes at ambient mantle temperatures in a thermal boundary layer directly beneath thick cratonic lithosphere. The success rate of ‘evolving’ hybrid kimberlite magmas reaching Earth’s surface increases when tensile stresses propagate into the > 200 km thick keels of continental lithosphere. These conditions are frequently met during fast and changing plate motions associated with the assembly and breakup of supercontinents.
Abstract: Neoproterozoic kimberlite, ultramafic lamprophyre, and carbonatite magmatic activity was widespread across the Canadian-Greenland Shield. Models to explain the preponderance of this deeply-derived CO2-rich magmatism between 680-540 Ma range from impingement of multiple mantle plumes to rifting activity linked to the breakout of the Laurentian plate from the Rodinia supercontinent configuration. We add to the debate about the origin of kimberlite magmas and evaluate possible mantle sources of the 655 Ma ‘diamond-rich’ Renard (new SIMS U/Pb perovskite ages) and 629 Ma ‘barren’ Wemindji kimberlites on the eastern Superior craton in Quebec, Canada. Our Sr-Nd-Hf and carbon isotope data (87Sr/86Sri = 0.70241-0.70442; ?Ndi = + 0.2 to + 4.8; ?Hfi = + 0.3 to + 6.5; ?13C = ? 5.6 to ? 3.9‰) suggest a common and moderately depleted convecting upper mantle source region for both the Renard and Wemindji kimberlites, which occur 400-km apart in the interior of the Superior craton. In contrast, the low Os isotope ratios (187Os/188Osi = 0.11078-0.12620; ?Osi = ? 13.7 to ? 1.6) and unfractionated chondritic relative HSE abundances (Os, Ir, Ru, Pt, Pd, Re) indicate significant involvement of ancient refractory cratonic mantle material in kimberlite magma formation. Our model calculations suggest that for both the diamond-rich Renard and the barren Wemindji kimberlite magmas up to 30% of the Os was derived from refractory cratonic peridotites. This material might have been assimilated by originally more CO2-rich carbonated silicate melts derived from the asthenosphere. We also show that the geochemical and Sr-Nd-Hf-Os isotopic compositions of the Renard and Wemindji kimberlites do not require significant input from melts derived from olivine-poor cratonic mantle lithologies such as MARID-type veins and pyroxenites/eclogites. This contrasts with the petrogenesis of deeply-derived volatile-rich potassic magmas found along the peripheries of cratons (e.g., ultramafic lamprophyres, kamafugites, and olivine lamproites), a setting where abundant non-peridotitic components have been added to the lithospheric mantle over the course of continent evolution. Provided that CO2-rich melts, such as proto-kimberlites, occur near the solidus of volatile-fluxed peridotites, no excess mantle heat is required in their formation. This important but often overlooked constraint, together with the observation that there exist no spatial or temporal relationships between the Superior craton kimberlites and Large Igneous Provinces during the Late Neoproterozoic, suggests that kimberlite magmatic activity was tectonically controlled. In our preferred model, ubiquitous CO2-rich proto-kimberlite melts form during volatile-controlled redox melting processes at ambient mantle temperatures in a thermal boundary layer directly beneath thick cratonic lithosphere. The success rate of ‘evolving’ hybrid kimberlite magmas reaching Earth’s surface increases when tensile stresses propagate into the > 200 km thick keels of continental lithosphere. These conditions are frequently met during fast and changing plate motions associated with the assembly and breakup of supercontinents.
Geochimica et Cosmochimica Acta, Vol. 173, pp. 1-36.
Europe
Geochronology
Abstract: A new high-precision 40Ar/39Ar anorthoclase feldspar age of 176.7 ± 0.5 Ma (2-sigma) reveals that small-volume alkaline basaltic magmatism occurred at the rifted SW margin of the Baltic Shield in Scania (southern Sweden), at a time of global plate reorganization associated with the inception of Pangea supercontinent break-up. Our combined elemental and Sr-Nd-Hf-Pb isotope dataset for representative basanite and nephelinite samples (>8 wt.% MgO) from 16 subvolcanic necks of the 30 by 40 km large Jurassic volcanic field suggests magma derivation from a moderately depleted mantle source (87Sr/86Sri = 0.7034-0.7048; ?Ndi = +4.4 to +5.2; ?Hfi = +4.7 to +8.1; 206Pb/204Pbi = 18.8-19.5). The mafic alkaline melts segregated from mixed peridotite-pyroxenite mantle with a potential temperature of ?1400 °C at 2.7-4.2 GPa (?90-120 km depths), which places ultimate melt generation within the convecting upper mantle, provided that the lithosphere-asthenosphere boundary beneath the southern Baltic Shield margin was at ?100 km depth during Mesozoic-Cenozoic rifting. Isotopic shifts and incompatible element enrichment relative to Depleted Mantle reflect involvement of at least 20% recycled oceanic lithosphere component (i.e., pyroxenite) with some minor continent-derived sediment during partial melting of well-stirred convecting upper mantle peridotite. Although pargasitic amphibole-rich metasomatized lithospheric mantle is excluded as the main source of the Jurassic magmas from Scania, hydrous ultramafic veins (i.e., hornblendite) may have caused subtle modifications to the compositions of passing sublithospheric melts. For example, modeling suggests that the more radiogenic Hf (?Hfi = +6.3 to +8.1) and Pb (206Pb/204Pbi = 18.9-19.5) isotopic compositions of the more sodic and H2O-rich nephelinites, compared with relatively homogenous basanites (?Hfi = +4.7 to +6.1; 206Pb/204Pbi = 18.8-18.9), originate from minor interactions between rising asthenospheric melts and amphibole-rich metasomatic components. The metasomatic components were likely introduced to the lithospheric mantle beneath the southern Baltic Shield margin during extensive Permo-Carboniferous magmatic activity, a scenario that is supported by the geochemical and isotope compositions of ca. 286 Ma lamprophyres from Scania (87Sr/86Sri = 0.7040-0.7054; ?Ndi = +2.0 to +3.1; ?Hfi = +6.1 to +9.0; 206Pb/204Pbi = 17.8-18.2). Strong variations in lithosphere thickness and thermal structure across the southern Baltic Shield margin may have caused transient small-scale mantle convection. This resulted in relatively fast and focused upwellings and lateral flow beneath the thinned lithosphere, where mafic alkaline magmas formed by low degrees of decompression melting of sublithospheric mantle. Such a geodynamic scenario would allow for enriched recycled components with low melting points to be preferentially sampled from the more depleted and refractory convecting upper mantle when channeled along a destabilizing craton edge. Similar to the ‘lid effect’ in oceanic island volcanic provinces, lithospheric architecture may exert strong control on the mantle melting regime, and thus offer a simple explanation for the geochemical resemblance of continental and oceanic intraplate mafic alkaline magmas of high Na/K affinity.
Low water contents in diamond mineral inclusions: proto-genetic origin in a dry cratonic lithosphere.
Earth and Planetary Science Letters, Vol. 433, pp. 125-132.
Russia, Africa
Kaapvaal and Siberian SCLMs
Abstract: The mantle is the major reservoir of Earth's water, hosted within Nominally Anhydrous Minerals (NAMs) (e.g., , , and ), in the form of hydrogen bonded to the silicate's structural oxygen. From whence cometh this water? Is the water in these minerals representative of the Earth's primitive upper mantle or did it come from melting events linked to crustal formation or to more recent metasomatic/re-fertilization events? During diamond formation, NAMs are encapsulated at hundreds of kilometers depth within the mantle, thereby possibly shielding and preserving their pristine water contents from re-equilibrating with fluids and melts percolating through the lithospheric mantle. Here we show that the NAMs included in diamonds from six locales on the Siberian Craton contain measurable and variable H2O concentrations from 2 to 34 parts per million by weight (ppmw) in olivine, 7 to 276 ppmw in clinopyroxene, and 11-17 ppmw in garnets. Our results suggest that if the inclusions were in equilibrium with the diamond-forming fluid, the water fugacity would have been unrealistically low. Instead, we consider the H2O contents of the inclusions, shielded by diamonds, as pristine representatives of the residual mantle prior to encapsulation, and indicative of a protogenetic origin for the inclusions. Hydrogen diffusion in the diamond does not appear to have modified these values significantly. The H2O contents of NAMs in mantle xenoliths may represent some later metasomatic event(s), and are not always representative of most of the continental lithospheric mantle. Results from the present study also support the conclusions of Peslier et al. (2010) and Novella et al. (2015) that the dry nature of the SCLM of a craton may provide stabilization of its thickened continental roots.
Abstract: The cooling history of rift shoulders and the subsidence history of rift basins are cornerstones for reconstructing the morphotectonic evolution of extensional geodynamic provinces, assessing their role in paleoenvironmental changes and evaluating the resource potential of their basin fills. Our apatite fission track and zircon (U-Th)/He data from the Samburu Hills and the Elgeyo Escarpment in the northern and central sectors of the Kenya Rift indicate a broadly consistent thermal evolution of both regions. Results of thermal modeling support a three-phased thermal history since the early Paleocene. The first phase (~65 50?Ma) was characterized by rapid cooling of the rift shoulders and may be coeval with faulting and sedimentation in the Anza Rift basin, now located in the subsurface of the Turkana depression and areas to the east in northern Kenya. In the second phase, very slow cooling or slight reheating occurred between ~45 and 15?Ma as a result of either stable surface conditions, very slow exhumation, or subsidence. The third phase comprised renewed rapid cooling starting at ~15?Ma. This final cooling represents the most recent stage of rifting, which followed widespread flood-phonolite emplacement and has shaped the present-day landscape through rift shoulder uplift, faulting, basin filling, protracted volcanism, and erosion. When compared with thermochronologic and geologic data from other sectors of the East African Rift System, extension appears to be diachronous, spatially disparate, and partly overlapping, likely driven by interactions between mantle-driven processes and crustal heterogeneities, rather than the previously suggested north south migrating influence of a mantle plume.
Physics of the Earth and Planetary Interiors, Vol. 250, pp. 46-63.
Mantle
Water
Abstract: Although water has a major influence on tectonic and other geodynamic processes, little is known about its quantity and distribution within the deep Earth. In the last few decades, laboratory experiments on nominally anhydrous minerals (NAMs) of the transition zone have shown that these minerals can contain significant amounts of water, up to 3.3 wt%. In this study, we investigate if it is possible to use seismic observations to distinguish between a hydrous and anhydrous transition zone. We perform an extensive literature search of mineral experimental data, to generate a compilation of the water storage capacities, elastic parameters and phase boundary data for potentially hydrous minerals in the transition zone, and use thermodynamic modelling to compute synthetic seismic profiles of density, VP and VS at transition zone temperatures and pressures. We find that large uncertainties on the mineral phase equilibria (ca. 2 GPa) and elastic properties produce a wide range of seismic profiles. In particular, there is a lack of data at temperatures corresponding to those along a 1300 °C adiabat or hotter, which may be expected at transition zone pressures. Comparing our hydrous transition zone models with equivalent profiles at anhydrous conditions, we see that the depths of the 410 and 660 discontinuities cannot at present be used to map the water content of the transition zone due to these uncertainties. Further, while average velocities and densities inside the transition zone clearly decrease with increasing water content, there is a near-perfect trade-off with increases in temperature. It is therefore difficult to distinguish thermal from water effects, and the conventional view of a slow and thick transition zone for water and slow and thin transition zone for high temperature should be regarded with caution. A better diagnostic for water may be given by the average velocity gradients of the transition zone, which increase with increasing water content (but decrease for increasing temperature). However the significance of this effect depends on the degree of water saturation and partitioning between the NAMs. Since seismology is better able to constrain the thickness of the transition zone than velocity gradients, our study indicates that the most useful input from future mineral physics experiments would be to better constrain the phase relations between hydrous olivine and its high-pressure polymorphs, especially at high temperatures. Additionally, the uncertainties on the mineral seismic properties could be reduced significantly if the experimentally-observable correlations between bulk and shear moduli and their corresponding pressure derivatives would be published.
Abstract: Igneous intrusions, notably carbonatitic-alkalic intrusions, peralkaline intrusions, and pegmatites, represent significant sources of rare-earth metals. Geophysical exploration for and of such intrusions has met with considerable success. Examples of the application of the gravity, magnetic, and radiometric methods in the search for rare metals are presented and described. Ground gravity surveys defining small positive gravity anomalies helped outline the shape and depth of the Nechalacho (formerly Lake) deposit within the Blatchford Lake alkaline complex, Northwest Territories, and of spodumene-rich mineralization associated with the Tanco deposit, Manitoba, within the hosting Tanco pegmatite. Based on density considerations, the bastnaesite-bearing main ore body within the Mountain Pass carbonatite, California, should produce a gravity high similar in amplitude to those associated with the Nechalacho and Tanco deposits. Gravity also has utility in modelling hosting carbonatite intrusions, such as the Mount Weld intrusion, Western Australia, and Elk Creek intrusion, Nebraska. The magnetic method is probably the most successful geophysical technique for locating carbonatitic-alkalic host intrusions, which are typically characterized by intense positive, circular to sub-circular, crescentic, or annular anomalies. Intrusions found by this technique include the Mount Weld carbonatite and the Misery Lake alkali complex, Quebec. Two potential carbonatitic-alkalic intrusions are proposed in the Grenville Province of Eastern Quebec, where application of an automatic technique to locate circular magnetic anomalies identified several examples. Two in particular displayed strong similarities in magnetic pattern to anomalies accompanying known carbonatitic or alkalic intrusions hosting rare-metal mineralization and are proposed to have a similar origin. Discovery of carbonatitic-alkalic hosts of rare metals has also been achieved by the radiometric method. The Thor Lake group of rare-earth metal deposits, which includes the Nechalacho deposit, were found by follow-up investigations of strong equivalent thorium and uranium peaks defined by an airborne survey. Prominent linear radiometric anomalies associated with glacial till in the Canadian Shield have provided vectors based on ice flow directions to source intrusions. The Allan Lake carbonatite in the Grenville Province of Ontario is one such intrusion found by this method. Although not discovered by its radiometric characteristics, the Strange Lake alkali intrusion on the Quebec-Labrador border is associated with prominent linear thorium and uranium anomalies extending at least 50 km down ice from the intrusion. Radiometric exploration of rare metals hosted by pegmatites is evaluated through examination of radiometric signatures of peraluminous pegmatitic granites in the area of the Tanco pegmatite.
Geophysical Prospecting, Vol. 64, 5, pp. 1275-1304.
Geophysics
Abstract: Igneous intrusions, notably carbonatitic-alkalic intrusions, peralkaline intrusions, and pegmatites, represent significant sources of rare-earth metals. Geophysical exploration for and of such intrusions has met with considerable success. Examples of the application of the gravity, magnetic, and radiometric methods in the search for rare metals are presented and described. Ground gravity surveys defining small positive gravity anomalies helped outline the shape and depth of the Nechalacho (formerly Lake) deposit within the Blatchford Lake alkaline complex, Northwest Territories, and of spodumene-rich mineralization associated with the Tanco deposit, Manitoba, within the hosting Tanco pegmatite. Based on density considerations, the bastnaesite-bearing main ore body within the Mountain Pass carbonatite, California, should produce a gravity high similar in amplitude to those associated with the Nechalacho and Tanco deposits. Gravity also has utility in modelling hosting carbonatite intrusions, such as the Mount Weld intrusion, Western Australia, and Elk Creek intrusion, Nebraska. The magnetic method is probably the most successful geophysical technique for locating carbonatitic-alkalic host intrusions, which are typically characterized by intense positive, circular to sub-circular, crescentic, or annular anomalies. Intrusions found by this technique include the Mount Weld carbonatite and the Misery Lake alkali complex, Quebec. Two potential carbonatitic-alkalic intrusions are proposed in the Grenville Province of Eastern Quebec, where application of an automatic technique to locate circular magnetic anomalies identified several examples. Two in particular displayed strong similarities in magnetic pattern to anomalies accompanying known carbonatitic or alkalic intrusions hosting rare-metal mineralization and are proposed to have a similar origin. Discovery of carbonatitic-alkalic hosts of rare metals has also been achieved by the radiometric method. The Thor Lake group of rare-earth metal deposits, which includes the Nechalacho deposit, were found by follow-up investigations of strong equivalent thorium and uranium peaks defined by an airborne survey. Prominent linear radiometric anomalies associated with glacial till in the Canadian Shield have provided vectors based on ice flow directions to source intrusions. The Allan Lake carbonatite in the Grenville Province of Ontario is one such intrusion found by this method. Although not discovered by its radiometric characteristics, the Strange Lake alkali intrusion on the Quebec-Labrador border is associated with prominent linear thorium and uranium anomalies extending at least 50 km down ice from the intrusion. Radiometric exploration of rare metals hosted by pegmatites is evaluated through examination of radiometric signatures of peraluminous pegmatitic granites in the area of the Tanco pegmatite.
Abstract: Geological mapping and zircon U-Pb/Hf isotope data from 35 samples from the central Tanzania Craton and surrounding orogenic belts to the south and east allow a revised model of Precambrian crustal evolution of this part of East Africa. The geochronology of two studied segments of the craton shows them to be essentially the same, suggesting that they form a contiguous crustal section dominated by granitoid plutons. The oldest orthogneisses are dated at ca. 2820 Ma (Dodoma Suite) and the youngest alkaline syenite plutons at ca. 2610 Ma (Singida Suite). Plutonism was interrupted by a period of deposition of volcano-sedimentary rocks metamorphosed to greenschist facies, directly dated by a pyroclastic metavolcanic rock which gave an age of ca. 2725 Ma. This is supported by detrital zircons from psammitic metasedimentary rocks, which indicate a maximum depositional age of ca. 2740 Ma, with additional detrital sources 2820 and 2940 Ma. Thus, 200 Ma of episodic magmatism in this part of the Tanzania Craton was punctuated by a period of uplift, exhumation, erosion and clastic sedimentation/volcanism, followed by burial and renewed granitic to syenitic magmatism. In eastern Tanzania (Handeni block), in the heart of the East African Orogen, all the dated orthogneisses and charnockites (apart from those of the overthrust Neoproterozoic granulite nappes), have Neoarchaean protolith ages within a narrow range between 2710 and 2630 Ma, identical to (but more restricted than) the ages of the Singida Suite. They show evidence of Ediacaran "Pan-African" isotopic disturbance, but this is poorly defined. In contrast, granulite samples from the Wami Complex nappe were dated at ca. 605 and ca. 675 Ma, coeval with previous dates of the "Eastern Granulites" of eastern Tanzania and granulite nappes of adjacent NE Mozambique. To the south of the Tanzania Craton, samples of orthogneiss from the northern part of the Lupa area were dated at ca. 2730 Ma and clearly belong to the Tanzania Craton. However, granitoid samples from the southern part of the Lupa "block" have Palaeoproterozoic (Ubendian) intrusive ages of ca. 1920 Ma. Outcrops further south, at the northern tip of Lake Malawi, mark the SE continuation of the Ubendian belt, albeit with slightly younger ages of igneous rocks (ca. 1870-1900 Ma) which provide a link with the Ponte Messuli Complex, along strike to the SE in northern Mozambique. In SW Tanzania, rocks from the Mgazini area gave Ubendian protolith ages of ca. 1980-1800 Ma, but these rocks underwent Late Mesoproterozoic high-grade metamorphism between 1015 and 1040 Ma. One granitoid gave a crystallisation age of ca. 1080 Ma correlating with known Mesoproterozoic crust to the east in SE Tanzania and NE Mozambique. However, while the crust in the Mgazini area was clearly one of original Ubendian age, reworked and intruded by granitoids at ca. 1 Ga, the crust of SE Tanzania is a mixed Mesoproterozoic terrane and a continuation from NE Mozambique. Hence the Mgazini area lies at the edge of the Ubendian belt which was re-worked during the Mesoproterozoic orogen (South Irumide belt), providing a further constraint on the distribution of ca. 1 Ga crust in SE Africa. Hf data from near-concordant analyses of detrital zircons from a sample from the Tanzania Craton lie along a Pb-loss trajectory (Lu/Hf = 0), extending back to ?3.9 Ga. This probably represents the initial depleted mantle extraction event of the cratonic core. Furthermore, the Hf data from all igneous samples, regardless of age, from the entire study area (including the Neoproterozoic granulite nappes) show a shallow evolution trend (Lu/Hf = 0.028) extending back to the same mantle extraction age. This implies the entire Tanzanian crust sampled in this study represents over 3.5 billion years of crustal reworking from a single crustal reservoir and that the innermost core of the Tanzanian Craton that was subsequently reworked was composed of a very depleted, mafic source with a very high Lu/Hf ratio. Our study helps to define the architecture of the Tanzanian Craton and its evolution from a single age-source in the early Eoarchaean.
Abstract: The trace element compositions of inclusions in sub-lithospheric diamonds from the Juina-5 kimberlite, Brazil, are presented. Literature data for mineral/melt partition coefficients were collated, refitted and employed to interpret inclusion compositions. As part of this process an updated empirical model for predicting the partitioning behaviour of trivalent cations for garnet-melt equilibrium calibrated using data from 73 garnet-melt pairs is presented. High levels of trace element enrichment in inclusions interpreted as former calcium silicate perovskite and majoritic garnet preclude their origin as fragments of an ambient deep mantle assemblage. Inclusions believed to represent former bridgmanite minerals also display a modest degree of enrichment relative to mantle phases. The trace element compositions of ‘NAL’ and ‘CF phase’ minerals are also reported. Negative Eu, Ce, and Y/Ho anomalies alongside depletions of Sr, Hf and Zr in many inclusions are suggestive of formation from a low-degree carbonatitic melt of subducted oceanic crust. Observed enrichments in garnet and ‘calcium perovskite’ inclusions limit depths of melting to less than ~ 600 km, prior to calcium perovskite saturation in subducting assemblages. Less enriched inclusions in sub-lithospheric diamonds from other global localities may represent deeper diamond formation. Modelled source rock compositions that are capable of producing melts in equilibrium with Juina-5 ‘calcium perovskite’ and majorite inclusions are consistent with subducted MORB. Global majorite inclusion compositions suggest a common process is responsible for the formation of many superdeep diamonds, irrespective of geographic locality. Global transition zone inclusion compositions are reproduced by fractional crystallisation from a single parent melt, suggesting that they record the crystallisation sequence and melt evolution during this interaction of slab melts with ambient mantle. All observations are consistent with the previous hypothesis that many superdeep diamonds are created as slab-derived carbonatites interact with peridotitic mantle in the transition zone.
Abstract: Interactions between crustal and mantle reservoirs dominate the surface inventory of volatile elements over geological time, moderating atmospheric composition and maintaining a life-supporting planet. While volcanoes expel volatile components into surface reservoirs, subduction of oceanic crust is responsible for replenishment of mantle reservoirs. Many natural, 'superdeep' diamonds originating in the deep upper mantle and transition zone host mineral inclusions, indicating an affinity to subducted oceanic crust. Here we show that the majority of slab geotherms will intersect a deep depression along the melting curve of carbonated oceanic crust at depths of approximately 300 to 700 kilometres, creating a barrier to direct carbonate recycling into the deep mantle. Low-degree partial melts are alkaline carbonatites that are highly reactive with reduced ambient mantle, producing diamond. Many inclusions in superdeep diamonds are best explained by carbonate melt-peridotite reaction. A deep carbon barrier may dominate the recycling of carbon in the mantle and contribute to chemical and isotopic heterogeneity of the mantle reservoir.
Abstract: The composition of volatiles from fluid and melt inclusions in olivine phenocrysts from Yakutian kimberlite pipes of various ages (Olivinovaya, Malokuonapskaya, and Udachnaya-East) were studied for the first time by gas chromatography-mass spectrometry. It was shown that hydrocarbons and their derivatives, as well as nitrogen-, halogen-, and sulfur-bearing compounds, played a significant role in the mineral formation. The proportion of hydrocarbons and their derivatives in the composition of mantle fluids could reach 99%, including up to 4.9% of chlorineand fluorine-bearing compounds.
Abstract: MgSiO3 tetragonal garnet, which is the last of the missing phases of experimentally predicted high-pressure polymorphs of pyroxene, has been discovered in a shocked meteorite. The garnet is formed from low-Ca pyroxene in the host rock through a solid-state transformation at 17 to 20 GPa and 1900° to 2000°C. On the basis of the degree of cation ordering in its crystal structure, which can be deduced from electron diffraction intensities, the cooling rate of the shock-induced melt veins from ~2000°C was estimated to be higher than 103°C/s. This cooling rate sets the upper bound for the shock-temperature increase in the bulk meteorite at ~900°C.
Abstract: In response to rising demand of the rare earth elements (REE), recent exploration of the British Columbia alkaline province has identified the Wicheeda Carbonatite, which contains an estimated 11.3 million tons of light REE-enriched ore grading 1.95 wt.% TREO, to be the highest-grade prospect known in British Columbia. However, research of the deposit is restricted to one paper describing mineralization in carbonatite dikes adjacent to the main plug. This study describes the nature and origin of REEmineralization in the Wicheeda plug. The carbonatite was emplaced in metasedimentary limestone and argillaceous limestone belonging to the Kechika Group, which has been altered to potassic fenite immediately adjacent to the carbonatite and to sodic fenite at greater distances from it. The carbonatite comprises a ferroan dolomite core, which passes outwards gradationally into calcite carbonatite. Three texturally distinct varieties of dolomite have been recognized. Dolomite 1 constitutes most of the carbonatite; Dolomite 2 replaced Dolomite 1 near veins and vugs; Dolomite 3 occurs as a fracture and vug-lining phase with the REE mineralization. Stable carbon and oxygen isotopic ratios indicate that the calcite carbonatite is of mantle origin, that Dolomite 1 is of primary igneous origin, that Dolomite 2 is largely primary igneous with minor hydrothermal signature contamination, and that Dolomite 3 is of hydrothermal origin. Rare-metal mineralization in the deposit is, with the exception of pyrochlore, which occurs in the calcite carbonatite, restricted to veins and vugs in the dolomite carbonatite. There it occurs as hydrothermal veins and in vugs infilled by REE-fluorocarbonates, i.e., bastnäsite-(Ce), ancylite-(Ce), and monazite- (Ce) together with accessory pyrite, barite, molybdenite, and thorite. A model is proposed in which calcite carbonatite was the earliest magmatic phase to crystallize. The calcite carbonatite magma saturated with niobium relatively early, precipitating pyrochlore. The magma later evolved to a dolomite carbonatite composition which, upon cooling exsolved an aqueous carbonic fluid, which altered the Kechika metasediments to potassic fenite and mixed with formational waters further from the carbonatite to produce sodic fenite. This fluid mobilized the REE as chloride complexes into vugs and fractures in the dolomite carbonatite. Upon progressive fluid-rock interaction, the REE precipitated largely in response to cooling and pH. Hydrothermal concentration led to remarkable grade consistency, with virtually all of the dolomite carbonatite containing >1 wt.% TREO, making the Wicheeda Carbonatite a very attractive exploration target.
Abstract: Current models for unconformity-associated uranium deposits predict fluid flow and ore deposition along reactivated faults in >1.76 Ga basement beneath Mesoproterozoic siliciclastic basins. In frontier regions such as the Thelon Basin in the Kivalliq region of Nunavut, little is known about the sub-basin distribution of units and structures, making exploration targeting very tenuous. We constructed a geological map of the basement beneath the unconformity by extrapolating exposed features into the subsurface. The new map is constrained by detailed geological, geophysical, and rock property observations of outcrops adjacent to the basin and by aeromagnetic and gravity data over the geophysically transparent sedimentary basin. From rock property measurements, it is clear that the diverse magnetic and density characteristics of major rock packages provide quantitative three-dimensional constraints. Gravity profiles forward modelled in four cross sections define broad synforms of the Amer Belt and Archean volcanic rocks that are consistent with the structural style outside the basin. Major lithotectonic entities beneath the unconformity include: supracrustal rocks of the Archean Woodburn Lake group and Marjorie Hills meta sedimentary gneiss and associated mixed granitoid and amphibolitic gneiss; the Amer Mylonite Zone and inferred mafic intrusions oriented parallel and sub-parallel; other igneous intrusions of 2.6 Ga, 1.83 Ga, and 1.75 Ga vintage; and the <2.3 Ga to >1.84 Ga Amer Group. Four main brittle regional fault arrays (040°-060°, 075°-90°, 120°, and 150°) controlled development and preservation of the basin. The reactivated intersections of such faults along fertile basement units such as the Rumble assemblage, Marjorie Hills assemblage, Nueltin igneous rocks, and Pitz formation are the best targets for uranium exploration.
Abstract: Seismic shear wave anisotropy1, 2, 3, 4, 5, 6 is observed in Earth’s uppermost lower mantle around several subducted slabs. The anisotropy caused by the deformation-induced crystallographic preferred orientation (CPO) of bridgmanite (perovskite-structured (Mg,Fe)SiO3) is the most plausible explanation for these seismic observations. However, the rheological properties of bridgmanite are largely unknown. Uniaxial deformation experiments7, 8, 9 have been carried out to determine the deformation texture of bridgmanite, but the dominant slip system (the slip direction and plane) has not been determined. Here we report the CPO pattern and dominant slip system of bridgmanite under conditions that correspond to the uppermost lower mantle (25 gigapascals and 1,873 kelvin) obtained through simple shear deformation experiments using the Kawai-type deformation-DIA apparatus10. The fabrics obtained are characterized by [100] perpendicular to the shear plane and [001] parallel to the shear direction, implying that the dominant slip system of bridgmanite is [001](100). The observed seismic shear- wave anisotropies near several subducted slabs1, 2, 3, 4 (Tonga-Kermadec, Kurile, Peru and Java) can be explained in terms of the CPO of bridgmanite as induced by mantle flow parallel to the direction of subduction.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 18p.
Africa, Botswana
Deposit - Jwaneng
Abstract: Slope stability is a fundamental part of a successful mining operation. It impacts directly on the safety of personnel and the economics of the mine. The Jwaneng Mine in Botswana is planning a push back of 644m depth in the south east wall. Mining will commence in 2010 and be completed in 2024. This will put the mine in the deep pit category. The mine has invested in extensive geotechnical data gathering and design programs that started as far back as 2003 for the south east wall. The south east wail of Jwaneng Mine is characterized by foliation that dips adversely into the mining faces. The orienta1ion of the foliation is variable due to intense tectonic movements that have also caused the occurrence of faults that are sub-vertical. A considerable amount of information on the characteristics of structural patterns and the rock mass has been collected. This paper presents an overview of the feasibility level geotechnical design that is about to be concluded.
Abstract: The results of morphological examination and the character of the structural orientation and estimation of residual pressure calculated from spectra of combination dispersion in olivine inclusions within diamonds of the Ebelyakh placer and kimberlite pipes of the Yakutian Diamondiferous Province are presented. The data analysis aimed at revealing indications of similarity and/or differences between diamonds from the pipes and the placer. Differences in the structural orientation and spectra of combination dispersion of the inclusions of olivine in dodecahedroids of placers of the northeastern part of the Siberian Platform support the assumption of their non-kimberlite nature.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 12p.
Africa, South Africa
Deposit - Namaqualand mines
Abstract: Alluvial diamond deposits covered with a thick overburden cannot be explored effectively and mined profitably with the available conventional techniques. A novel directional drilling technique has been developed and site trials have been conducted at the e Beers Namaqualand Mines situated at the western coast of South Africa. This paper describes the technique developed as well as the results of the site trials. The main task of the project is to develop a tool and a supporting system to achieve a remote exploration and ore extraction method for inaccessible alluvial diamond deposits. The project involves the acquisition of a system, commissioning on-site and evaluating the information obtained during assessment. The project consists of the design - of certain tools and instrumentation for the system, investigations and desktop studies as well as development of the systems logistics. The operating philosophy of the system is based on the keyhole surgery principle. In this study a pilot hole was drilled first, starting from the surface with an inclination to reach deeply seated diamondiferous gravel layers, followed by drilling into a more or less horizontal gravel layer for a certain length and finally pointing-upwards reaching ground surface at a predetermined exit point. The pilot drill bit was then replaced with a larger diameter reamer/mining tool and an HDPE tail pipe was attached behind the reamer. The drill string was retracted back to enlarge the guide hole and flush the excavated ore to the surface through the tail pipe. The material flow in between the sections of the system was carefully measured to assess and record the gravel recovery rates. Several horizontal holes were drilled at preplanned drill paths to reach and follow the ore layer and the ore extraction was achieved by means of a reamer/mining tool. Principles of the concept have been proven viable in this investigation
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 10p.
Technology
Sorting
Abstract: The introduction of new diamond sorting technologies as well as additional manufacturers I vendors, has increased the equipment selection and combinations available for recovery flowsheet design. This paper describes the methodology used and the benefits realized in the design of recovery plants by ensuring a fundamental understanding of the advantages and limitations of the technology embodied in the equipment, a comprehensive knowledge of the ore body characteristics, and the effective matching of this information in combination with operational commercial requirements.
The 4th Colloquium on Diamonds - source to use held Gabarone March 1-3, 2010, 10p.
Global
History
Abstract: This paper examines the historical developments in diamond beneficiation technology and the impacts on the industry. The art of diamond beneficiation has given way to the application of scientific process, but at considerable capital expenditure. The shift in beneficiation methodologies has been disruptive to the traditional skills set of the industry, but evolutionary change continues and has been beneficial to the quality of the final product.
Mine Water and the Environment, Vol. 35, pp. 350-368.
Canada, Northwest Territories
Deposit - Gahcho Kue
Abstract: Eight water models were used to assess potential aquatic environmental effects of the proposed Gahcho Kué diamond mine on groundwater and surface water flow and quality in the Northwest Territories, Canada. This sequence of models was required to cover different spatial and temporal domains, as well as specific physico-chemical processes that could not be simulated by a single model. Where their domains overlapped, the models were interlinked. Feedback mechanisms amongst models were addressed through iterative simulations of linked models. The models were used to test and refine mitigation plans, and in the development of aquatic component monitoring programs. Key findings generated by each model are presented here as testable hypotheses that can be evaluated after the mine is operational. This paper therefore offers a record of assumptions and predictions that can be used as a basis for post-validation.
Abstract: Analysis of petrochemical and geochemical information of the same levels, which characterize rocks and primary melt inclusions in olivines of heterochronic meimechite-picrite associations in Siberia (Maimecha-Kotui province), Primorye (Sikhote-Alin), and Kamchatka demonstrated that, besides the similar appearance and identical structural patterns, they are considerably discrepant in the concentration and distribution of incompatible and rare earth elements. Those differences are also observed for the compositions and evolutionary trends of parental high-temperature magnesium-rich melts. This, in turn, was assumed to be a consequence of a variable degree of melting of the mantle protoliths in the mentioned regions, which is supported by geochemical modeling.
Technical Physics ** in ENG, Vol. 50, 6, pp. 711-714.
Technology
Nitrogen
Abstract: Natural diamonds are studied by Fourier-transform IR (FTIR) spectroscopy, and it is shown that B2 centers in them form through intermediate stages, which are accompanied by the appearance of absorption bands with maxima near 1550 and 1526 cm?1. The concentration of interstitial carbon atoms in the centers responsible for these bands may be several times higher than the concentration of the interstitials in B 2 defects.
Abstract: The metallurgical recovery processes in diamond mining may, under certain circumstances, cause an under-recovery of large diamonds. In order to predict high quantiles or tail probabilities we use a Bayesian approach to fit a truncated Generalized Pareto Type distribution to the tail of the data consisting of the weights of individual diamonds. Based on the estimated tail probability, the expected number of diamonds larger than a specified weight can be estimated. The difference between the expected and observed frequencies of diamond weights above an upper threshold provides an estimate of the number of diamonds lost during the recovery process.
Exploration Geophysics , http://dx.doi.org/10.1071/EG16015 10p. Available
Russia
Deposit Amakinskaya, Geophysics
Abstract: There have been multiple occurrences in the literature in the past several years of what has been referred to as the induced polarisation (IP) effect in airborne time domain electromagnetic (TDEM) data. This phenomenon is known to be responsible for incorrect inversion modelling of electrical resistivity, lower interpreted depth of investigation (DOI) and lost information about chargeability of the subsurface and other valuable parameters. Historically, there have been many suggestions to account for the IP effect using the Cole-Cole model. It has been previously demonstrated that the Cole-Cole model can be effective in modelling synthetic TDEM transients. In the current paper we show the possibility of extracting IP information from airborne TDEM data using this same concept, including inverse modelling of chargeability from TDEM data collected by VTEM, with field examples from Canada (Mt Milligan deposit) and Russia (Amakinskaya kimberlite pipe).
Journal of the Geological Society of India, Vol. 87, 6, pp. 709-715.
India
Carbonatite
Abstract: The Siriwasan carbonatite-sill along with associated alkaline rocks and fenites is located about 10 km north of the well-known Amba Dongar carbonatite-alkaline rocks diatreme, in the Chhota Udaipur carbonatite-alkaline province. Carbonatite has intruded as a sill into the Bagh sandstone and overlying Deccan basalt. This resulted in the formation of carbonatite breccia with enclosed fragments of basement metamorphics, sandstone and fenites in the matrix of ankeritic carbonatite. The most significant are the plugs of sovite with varied mineralogy that include pyroxene, amphibole, apatite, pyrochlore, perovskite and sphene. REE in sovites is related to the content of pyrochlore, perovskite and apatite. The carbon and oxygen isotopic compositions of some sovite samples and an ankeritic carbonatite plot in the "mantle box" pointing to their mantle origin. However, there is also evidence for mixing of the erupting carbonatite magma with the overlying Bagh limestone. The carbonatites of Siriwasan and Amba Dongar have the same Sr and Nd isotopic ratios and radiometric age, suggesting the same magma source. On the basis of available chemical analyses this paper is aimed to give some details of the Siriwasan carbonatites. The carbonatite complex has good potential for an economic mineral deposit but this is the most neglected carbonatite of the Chhota Udaipur province.
Abstract: The paper presents detailed geochemical data on the rocks of the Zashikhinsky Massif and mineralogical-geochemical characteristics of the ores of the eponymous deposit. The rare-metal granites are divided into three facies varieties on the basis of the degree of differentiation and ore potential: early facies represented by microcline-albite granites with arfvedsonite, middle facies represented by leucocratic albite-microcline granites, and late (most ore-bearing) facies represented by quartz-albite granites grading into albitites. Microprobe data were obtained on major minerals accumulating trace elements in the rocks and ores. All facies of the rare-metal granites, including the rocks of the fluorite-rare-metal vein, define single compositional trends in the plots of paired correlations of rock-forming and trace elements. In addition, they also show similar REE patterns and spidergrams. The latter, however, differ in the depth of anomalies of some elements. Obtained geological, petrographic, and geochemical data suggest a magmatic genesis of the rocks of different composition and their derivation from a single magma during its differentiation. On the basis of all characteristics, the Zashikhinskoe deposit is estimated as one of the largest tantalum rare-metal deposits of alkaline-granite type in Russia.
Abstract: The Burpala alkaline massif contains rocks with more than 50 minerals rich in Zr, Nb, Ti, Th, Be and rare earth elements (REE). The rocks vary in composition from shonkinite, melanocratic syenite, nepheline and alkali syenites to alaskite and alkali granite and contain up to 10% LILE and HSFE, 3.6% of REE and varying amounts of other trace elements (4% Zr, 0.5% Y, 0.5% Nb, 0.5% Th and 0.1% U). Geological and geochemical data suggest that all the rocks in the Burpala massif were derived from alkaline magma enriched in rare earth elements. The extreme products of magma fractionation are REE rich pegmatites, apatite-fluorite bearing rocks and carbonatites. The Sr and Nd isotope data suggest that the source of primary melt is enriched mantle (EM-II). We correlate the massif to mantle plume impact on the active margin of the Siberian continent.
Earth and Planetary Science Letters, Vol. 447, pp. 60-71.
Africa, South Africa
Deposit - Bultfontein
Abstract: Understanding the mineralogical controls on radiogenic chronometers is a fundamental aspect of all geochronological tools. As with other common dating tools, it has become increasingly clear that the Re -Os system can be impacted by multiple mineral formation events. The accessory and micrometric nature of the Re -Os-bearing minerals has made assessing this influence complex. This is especially evident in cratonic peridotites, where long residence times and multiple metasomatic events have created a complex melting and re-enrichment history. Here we investigate a harzburgitic peridotite from the Bultfontein kimberlite (South Africa) which contains sub-micron Pt -Fe-alloy inclusions within base metal sulphides (BMS). Through the combination of the focused ion beam lift-out technique and low blank mass spectrometry we were able to remove and analyse the Pt -Fe-alloy inclusions for their Re -Os composition and highly siderophile element (HSE) systematics. Six repeats of the whole-rock yield 187Os/188Os compositions of 0.10893 -0.10965, which correspond to Re depletion model ages (TRD) of 2.69 -2.79 Ga. The Os, Ir and Pt concentrations are slightly variable across the different digestions, whilst Pd and Re remain constant. The resulting HSE pattern is typical of cratonic peridotites displaying depleted Pt and Pd. The Pt -Fe-alloys have PUM-like 187Os/188Os compositions of 0.1294±24 (2-s.d.) and 0.1342±38, and exhibit a saw-tooth HSE pattern with enriched Re and Pt. In contrast, their BMS hosts have unradiogenic 187Os/188Os of 0.1084±6 and 0.1066±3, with TRD ages of 2.86 and 3.09 Ga, similar to the whole-rock systematics. The metasomatic origin of the BMS is supported by (i) the highly depleted nature of the mantle peridotite and (ii) their Ni-rich sulphide assemblage. Occurrence of Pt -Fe-alloys as inclusions within BMS grains demonstrates the genetic link between the BMS and Pt -Fe-alloys and argues for formation during a single but continuous event of silicate melt percolation. While the high solubility of HSE within sulphide mattes rules out early formation of the alloys from a S-undersaturated silicate melt and subsequent scavenging in a sulphide matte, the alignment of the Pt -Fe-alloy inclusions attests that they are exsolutions formed during the sub-solidus re-equilibration of the high temperature sulphide phases. The significant difference in 187Os/188Os composition between the included Pt -Fe-alloys and their BMS host can only be accounted for by different Re/Os. This suggests that the formation of Pt -Fe-alloy inclusions within a BMS can result in the fractionation of Re from Os. A survey experiment examining the partitioning of Re and Os confirmed this observation, with the Re/Os of the Pt -Fe-alloy inclusion up to ten times higher than the co-existing BMS. This fractionation implies that, when Re is present in the sulphide melt, the TRD ages of BMS containing alloy inclusions do not date the loss of Re due to partial melting, but rather its fractionation into the Pt -Fe-alloys. As such, BMS ages should be used with caution when dating ancient partial melting events.
Abstract: This talk focused on the proximal reach (closest to its source) of the Kishon River, covering the Yizre'el Valley and its margins. In this terrain Shefa Yamim's exploration area overlaps the PhD study area of Reli Wald, the company's geologist. The Yizre'el basin hosts a large volume of basalts, sourced mainly from fault planes, but also from volcanoes (vents). Combination of datasets gathered from intensive exploration of Shefa Yamim, including site specific geophysics (high resolution ground magnetometer) and three-dimensional (3D) geological and geophysical subsurface mapping of Reli Wald's PhD study, has enabled quantification of the basalt volume. Since the basalts are known as host rocks for corundum xenocrysts (both gem and industrial minerals), volume estimations become handy when analysing Shefa Yamim corundum species recoveries including the gem derivative sapphire. Corundum findings of the Mid Reach alluvial placer were explained by introducing the geological Miocene (geological period) volcanic setting of the hinterland (proximal reach), in terms of a supplier. Corundum crystals have crystallized in the uppermost mantle, been elevated by magmatic intrusions into the crust, and brought to surface by later, younger volcanism. Corundum findings thus emphasize rift-related setting and recurring magmatism in northern Israel whereas important questions regarding the connection between sapphire and corundum and the possibility for a deep subduction regime still await answers...
Mineralogical Society Series, isbn 0-903056-22-4 on sale approx 20lbs
Russia, Kola Peninsula
Book - volcanology
Abstract: The first response to the title of this book is often 'What is a phoscorite?'. The exact definition and characteristics of phoscorite are discussed in some detail in Chapter 2 and were the subject of varying opinions amongst the authors of this and other chapters. We nicknamed the book 'the dark side of carbonatites', which covers it nicely. Phoscorites are dark, often very handsome, sometimes economically valuable, magnetite-apatite-silicate rocks, almost always associated with carbonatite. They are key to understanding the longstanding question of how carbonate and carbonate-bearing magmas rise to the crust and the Earth's surface. Despite this, they have been given little attention; a search on geological literature databases will produce thousands of references to carbonatite (up to 4125 on Georef) but not more than thirty references to phoscorite. This book goes some way to redress this balance. Over the last ten years many European and North American scientists have studied Kola rocks in collaboration with Russian colleagues. The idea for this book came from one such project funded by the European organisation, INTAS (Grant No 97-0722). The Kola Peninsula, Russia, is one of the outstanding areas in the World for the concentration and economic importance of alkaline rocks. However, Russian work on the Kola complexes is still relatively
Show Less
Mathematical Geosciences, Vol. 48, 7, pp. 767-789.
Technology
Trend modelling - not specific to diamonds
Abstract: Characterization of spatial variability in earth science commonly requires random fields which are stationary within delineated domains. This contribution presents an alternative approach for simulating attributes in combination with a non-stationary first-order moment. A new procedure is presented to unambiguously decompose the observed behaviour into a deterministic trend and a stochastic residual, while explicitly controlling the modelled uncertainty. The practicality of the approach resides in a straightforward and objective inference of the variogram model and neighborhood parameters. This method does not require a prior removal of the trend. The inference principle is based on minimizing the deviation between empirical and theoretical errors calculated for increasingly distant neighborhood shells. Further, the inference is integrated into a systematic simulation framework and accompanying validation guidelines are formulated. The effort results in a characterization of the resource uncertainty of an existing heavy mineral sand deposit.
Contributions to Mineralogy and Petrology, in press available 19p.
Asia, Tibet
Melting
Abstract: Felsic granulite xenoliths entrained in Miocene (~13 Ma) isotopically evolved, mantle-derived ultrapotassic volcanic (UPV) dykes in southern Tibet are refractory meta-granitoids with garnet and rutile in a near-anhydrous quartzo-feldspathic assemblage. High F-Ti (~4 wt.% TiO2 and ~3 wt.% F) phlogopite occurs as small inclusions in garnet, except for one sample where it occurs as flakes in a quartz-plagioclase-rich rock. High Si (~3.45) phengite is found as flakes in another xenolith sample. The refractory mineralogy suggests that the xenoliths underwent high-T and high-P metamorphism (800-850 °C, >15 kbar). Zircons show four main age groupings: 1.0-0.5 Ga, 50-45, 35-20, and 16-13 Ma. The oldest group is similar to common inherited zircons in the Gangdese belt, whereas the 50-45 Ma zircons match the crystallization age and juvenile character (?Hfi +0.5 to +6.5) of Eocene Gangdese arc magmas. Together these two age groups indicate that a component of the xenolith was sourced from Gangdese arc rocks. The 35-20 Ma Miocene ages are derived from zircons with similar Hf-O isotopic composition as the Eocene Gangdese magmatic zircons. They also have similar steep REE curves, suggesting they grew in the absence of garnet. These zircons mark a period of early Miocene remelting of the Eocene Gangdese arc. By contrast, the youngest zircons (13.0 ± 4.9 Ma, MSWD = 1.3) are not zoned, have much lower HREE contents than the previous group, and flat HREE patterns. They also have distinctive high Th/U ratios, high zircon ?18O (+8.73-8.97 ‰) values, and extremely low ?Hfi (?12.7 to ?9.4) values. Such evolved Hf-O isotopic compositions are similar to values of zircons from the UPV lavas that host the xenolith, and the flat REE pattern suggests that the 13 Ma zircons formed in equilibrium with garnet. Garnets from a strongly peraluminous meta-tonalite xenolith are weakly zoned or unzoned and fall into four groups, three of which are almandine-pyrope solid solutions and have low ?18O (+6 to 7.5 ‰), intermediate (?18O +8.5 to 9.0 ‰), and high ?18O (+11.0 to 12.0 ‰). The fourth is almost pure andradite with ?18O 10-12 ‰. Both the low and intermediate ?18O groups show significant variation in Fe content, whereas the two high ?18O groups are compositionally homogeneous. We interpret these features to indicate that the low and intermediate ?18O group garnets grew in separate fractionating magmas that were brought together through magma mixing, whereas the high ?18O groups formed under high-grade metamorphic conditions accompanied by metasomatic exchange. The garnets record complex, open-system magmatic and metamorphic processes in a single rock. Based on these features, we consider that ultrapotassic magmas interacted with juvenile 35-20 Ma crust after they intruded in the deep crust (>50 km) at ~13 Ma to form hybridized Miocene granitoid magmas, leaving a refractory residue. The ~13 Ma zircons retain the original, evolved isotopic character of the ultrapotassic magmas, and the garnets record successive stages of the melting and mixing process, along with subsequent high-grade metamorphism followed by low-temperature alteration and brecciation during entrainment and ascent in a late UPV dyke. This is an excellent example of in situ crust-mantle hybridization in the deep Tibetan crust.
Abstract: The Mg isotopic compositions of garnet and clinopyroxene mineral separates and whole rocks from 21 xenolithic eclogites (11 low-MgO eclogites and 10 high-MgO eclogites) from the Koidu kimberlite complex, erupted within the Archean Man Shield, Sierra Leone, West Africa, provide new evidence bearing on the origin of cratonic eclogites. Garnet and clinopyroxene in both low-MgO and high-MgO eclogites generally record equilibrium inter-mineral Mg isotope partitioning, with ?26Mg varying from -2.15‰ to -0.46‰ in garnets and from -0.49‰ to +0.35‰ in clinopyroxenes. Bulk ?26Mg values (-1.38‰-to +0.05-), constructed from garnet and clinopyroxene data, are similar to results from rock powders (-1.60‰ to +0.17‰), suggesting that kimberlite infiltration has had negligible influence on the Mg isotopic compositions of the xenoliths. The ?26Mg values of low-MgO eclogites (-0.80‰ to +0.05‰) exceed the range of mantle peridotite xenoliths (-0.25- ± 0.04-), consistent with the eclogite’s derivation from recycled altered oceanic crust. Similarly variable ?26Mg values in high-MgO eclogites (-0.95‰ to -0.13‰), together with their high MgO and low FeO contents, suggest that high-MgO eclogites were produced by Mg-Fe exchange between partially molten low-MgO eclogites and surrounding peridotites. Our study shows that cratonic xenolithic eclogites preserve a record of Mg isotopic compositions produced by low-pressure, surficial isotope fractionations. The recycling of oceanic crust therefore increases the Mg isotope heterogeneity of the mantle.-
Abstract: [Si-V]- is a well-known defect in diamond. It has a great potential in electronics application and also is a very important feature for gem diamond identification in separating natural from synthetic. It is common in CVD diamonds (Martineau et al., 2004), can be doped into HPHT synthetic diamonds (Sittas, et al., 1996), and also occurs in natural type IIa diamonds (Breeding and Wang, 2008). Recent study of [Si-V]- distribution (emissions at 736.6 and 736.9 nm) in HPHT synthetic diamonds confirmed that it was concentrated in the {111} growth sectors. Identical distribution pattern of Nii+, which has doublet emissions at 882.1 and 883.7 nm, was observed (Johnson et al., 2015), strongly indicating that [Si-V]- and Nii+ have the same behavior during HPHT diamond growth. However, little is known how [Si-V]- is incorporated in natural diamond lattice. In this report, we studied the distribution of [Si-V]- defect in natural diamonds and its correlation with other emissions (defects). Seven natural type IIa gem diamonds were analyzed in this study. A common feature of this group of diamonds is occurrence of euhedral olivine inclusions, which is very rare among natural type IIa diamonds and good evidence that these IIa diamonds were formed in the lithospheric mantle. Occurrence of [Si-V]- in these stones were detected among enormous natural type IIa diamonds routinely analyzed in GIA laboratories. Distribution of [Si-V]-, Nii+ and many other emissions were mapped over the table faces using various laser excitations at liquid nitrogen temperature. It was found that intensities of [Si-V]- emission varied significantly over a small area. The distribution patterns were irregular and changed from stone to stone. Distribution of Nii+ emissions showed irregular patterns, but entirely different from that of [Si-V]-. There is no correlation in spatial distribution of these two defects in natural type IIa diamonds, in drastic contract to that observed in HPHT synthetics. Possible causes of the contrast behaviors of [Si-V]- distributions in natural and HPHT synthetic diamonds, and their implications in diamond formation and gem diamond identification will be discussed.
Abstract: High-pressure, high-temperature (HPHT) technology for gem diamond synthesis has made rapid progress in the last few years. It is now being used to produce many melee-size diamonds around 2-3 mm in diameter and large colorless single crystals, all with significantly improved quality and growth rate. One Russian company is reportedly growing multiple large, gem-quality colorless diamond crystals in a single run (U.F.S. D’Haenens-Johansson et al., “Large colorless HPHT-grown synthetic gem diamonds from New Diamond Technology,” Fall 2015 G&G, pp. 260-279). Here we report on large diamond crystals manufactured using a similar technology by Jinan Zhongwu New Materials Co. Ltd in Shandong, China. We visited the Chinese factory in early March 2016 and obtained 50 crystals (figure 1). The crystals were examined using the instrumentation and techniques applied to all diamonds submitted to GIA for grading; all exhibited the typical characteristics of HPHT growth and were identified as synthetic. These were basically colorless, with only a few metallic inclusions observed. These crystals showed typical cuboctahedral morphology, with well-developed {100}, {110}, and {111} growth sectors and a weakly developed {113} sector. The crystals we obtained ranged from about 0.5 to 1.2 ct each. Absorption spectra in the infrared region showed they were type IIa diamond, but trace absorption from boron was detected (2800 cm-1). Detailed gemological and spectroscopic analyses are ongoing and will be reported separately. According to the manufacturer, large quantities of gem-quality colorless and blue diamonds are produced in this factory, in sizes up to 3.5 ct each. While the total production volume remains unclear, it is undoubtedly significant, and capacity is likely to expand in the near future. This strongly suggests that even more large HPHT synthetic diamonds will be introduced into the jewelry industry.
Journal of Geophysical Research,, Vol. 120, 12, pp. 8633-8655.
Mantle
Geodynamics
Abstract: With the advances in technology, seismological theory, and data acquisition, a number of high-resolution seismic tomography models have been published. However, discrepancies between tomography models often arise from different theoretical treatments of seismic wave propagation, different inversion strategies, and different data sets. Using a fixed velocity-to-density scaling and a fixed radial viscosity profile, we compute global mantle flow models associated with the different tomography models and test the impact of these for explaining surface geophysical observations (geoid, dynamic topography, stress, and strain rates). We use the joint modeling of lithosphere and mantle dynamics approach of Ghosh and Holt (2012) to compute the full lithosphere stresses, except that we use HC for the mantle circulation model, which accounts for the primary flow-coupling features associated with density-driven mantle flow. Our results show that the seismic tomography models of S40RTS and SAW642AN provide a better match with surface observables on a global scale than other models tested. Both of these tomography models have important similarities, including upwellings located in Pacific, Eastern Africa, Iceland, and mid-ocean ridges in the Atlantic and Indian Ocean and downwelling flows mainly located beneath the Andes, the Middle East, and central and Southeast Asia.
Contributions to Mineralogy and Petrology, Vol. 171, pp. 43-50.
Europe, Cape Verde Islands
Carbonatite
Abstract: The carbonatites of Brava Island, Cape Verde hot spot, allow to investigate whether they represent small mantle melt fractions or form through extreme fractionation and/or liquid immiscibility from CO2-bearing silicate magmas. The intrusive carbonatites on Brava Island are part of a strongly silica-undersaturated pyroxenite, ijolite, nephelinite, nepheline syenite, combeite-foiditite, carbonatite series. The major and trace element composition of this suite is reproduced by a model fractionating olivine, clinopyroxene, perovskite, biotite, apatite, titanite, sodalite and FeTi oxides, all present as phenocrysts in the rocks corresponding to their fractionation interval. Fractionation of ~90 wt% crystals reproduces the observed geochemical trend from the least evolved ultramafic dikes (bulk X Mg = 0.64) to syenitic compositions. The modelled fractional crystallization leads to alkali enrichment, driving the melt into the carbonatite-silicate miscibility gap. An initial CO2 content of 4000 ppm is sufficient to saturate in CO2 at the point where the rock record suggests continuing unmixing carbonatites from nephelinites to nepheline syenites after 61 wt% fractionation. Such immiscibility is also manifested in carbonatite and silicate domains on a hand-specimen scale. Furthermore, almost identical primary clinopyroxene, biotite and carbonate compositions from carbonatites and nephelinites to nepheline syenites substantiate their conjugate character and our unmixing model. The modelled carbonatite compositions correspond to the natural ones except for their much higher alkali contents. The alkali-poor character of the carbonatites on Brava and elsewhere is likely a consequence of the release of alkali-rich CO2 + H2O fluids during final crystallization, which cause fenitization in adjacent rocks. We propose a general model for carbonatite generation during alkaline magmatism, where the fractionation of heavily Si-undersaturated, alkaline parent melts results in alkali and CO2 enrichment in the evolving melt, ultimately leading to immiscibility between carbonatites and evolved Si-undersaturated alkaline melts. Early saturation in feldspathoids or feldspars would limit alkali enrichment preventing the formation of carbonatites. The complete and continuous fractionation line from almost primitive melts to syenitic compositions on Brava underlines the possibly important role of intrusives for hot spot volcanism.
Abstract: Structural, anisotropy of magnetic susceptibility (AMS), and paleomagnetic data record patterns of layer-parallel shortening (LPS), vertical-axis rotation, and regional fault-fold evolution across the Sweetwater Arch, a major west to WNW trending, basement-cored Laramide uplift in Wyoming. The southern arch flank is bounded by a WNW striking reverse fault zone that imbricated basement and cover rocks, the northern flank is bounded by a west striking fault zone with a component of strike-slip and NW trending en echelon folds, and the eastern plunge transitions into an area of multiple-trending faults and folds. Synorogenic strata record major arch uplift from Maastrichtian to Early Eocene time, followed by arch collapse. LPS, with development of systematic minor fault sets and AMS lineations, preceded large-scale folding. LPS directions, estimated from both minor fault and AMS data, were oriented WSW along the northern flank, subparallel to Laramide regional shortening, but were refracted to the SSW along the southern flank, and to the west along the eastern arch plunge. Additional minor faults developed along steep fold limbs during continued shortening, with directions remaining SSW along the southern flank but becoming more variable along the eastern plunge where an increasingly heterogeneous stress field developed as additional faults were activated along basement heterogeneities. Vertical-axis rotation was limited along the arch flanks, whereas the eastern plunge underwent counterclockwise rotation. Deflections in shortening directions were partly related to basement heterogeneities, including weak supracrustal belts on the arch flanks, a strong granitic core, and local reactivation of Precambrian shear zones.
Abstract: Mantle melting, which leads to the formation of oceanic and continental crust, together with crust recycling through plate tectonics, are the primary processes that drive the chemical differentiation of the silicate Earth. The present-day mantle, as sampled by oceanic basalts, shows large chemical and isotopic variability bounded by a few end-member compositions1. Among these, the HIMU end-member (having a high U/Pb ratio, ?) has been generally considered to represent subducted/recycled basaltic oceanic crust2, 3, 4, 5. However, this concept has been challenged by recent studies of the mantle source of HIMU magmas. For example, analyses of olivine phenocrysts in HIMU lavas indicate derivation from the partial melting of peridotite, rather than from the pyroxenitic remnants of recycled oceanic basalt6. Here we report data that elucidate the source of these lavas: high-precision trace-element analyses of olivine phenocrysts point to peridotite that has been metasomatized by carbonatite fluids. Moreover, similarities in the trace-element patterns of carbonatitic melt inclusions in diamonds7 and HIMU lavas indicate that the metasomatism occurred in the subcontinental lithospheric mantle, fused to the base of the continental crust and isolated from mantle convection. Taking into account evidence from sulfur isotope data8 for Archean to early Proterozoic surface material in the deep HIMU mantle source, a multi-stage evolution is revealed for the HIMU end-member, spanning more than half of Earth’s history. Before entrainment in the convecting mantle, storage in a boundary layer, upwelling as a mantle plume and partial melting to become ocean island basalt, the HIMU source formed as Archean-early Proterozoic subduction-related carbonatite-metasomatized subcontinental lithospheric mantle.
Abstract: The raw materials of some volcanic islands are shaped by some of the same processes that form diamonds deep under the continents, according to a new study. The study asserts that material from diamond-forming regions journeys nearly to Earth's core and back up to form such islands, a process that could take two and a half billion years or longer -- more than half of Earth's entire history.
Abstract: The bulk of the Earth’s volume is composed of the mantle-the layer of silicate rocks sandwiched between the dense, hot core and the thin crust. Although the mantle is mostly solid rock, it’s generally viscous: Slowly over millions of years, the material within the layer drifts, driving tectonic plates together and apart. Thus, the mantle’s influence can be seen on the planet’s surface on both large and small scales-from fueling volcanoes and seafloor expansion down to the composition and characteristics of igneous rocks. Most of the Earth’s mantle is composed of peridotite, an igneous rock rich in the mineral olivine. But previous research suggests that melted mantle pyroxenites-igneous rocks composed primarily of pyroxenes, minerals that contain 40% more silicon than olivine-may also be a source of oceanic lavas. New research by Lambart et al. seeks to better model how pyroxenites influence melting that occurs in the mantle. Pyroxenites make up between 2% and 10% of the upper mantle, depending on the region, but determining the amount of pyroxenites in hot mantle plumes to the surface requires more information. Researchers have found that at the same pressure, pyroxenites tend to melt at lower temperatures than peridotites, which means that any pyroxenites in peridotite-rich mantle regions might make up a larger portion of the liquid material than their small fraction of mantle bulk would suggest. To understand how the varying source materials in the mantle contribute to the characteristics of igneous rocks at the surface, researchers need to understand the melting characteristics of pyroxenites-a broad and variable group of rocks. That variability in composition makes predicting the phase changes of pyroxenites more complicated. And that complexity means that current models of mantle melting, like pMELTS, overestimate the temperature range over which pyroxenites melt. So the authors created a new parameterization for mantle melting models that seeks to rectify the problem. The new parameterization accounts for the fact that temperature, pressure, and the bulk chemical composition of the rocks together determine their near solidus temperature. The authors used a compilation of 183 experiments on pyroxenites with 25 varying chemical compositions, carried out over pressures from 0.9 to 5 gigapascals (GPa) and temperatures ranging from 1150°C to 1675°C. They charted the temperature when 5% of the materials was molten and the temperature at which clinopyroxene, a dominant mineral in pyroxenites, in each sample was gone-parameters that are easy to detect accurately and consistently. This analysis helped the authors create a new model based on experimental data from the literature, dubbed Melt-PX, which predicts the temperature at which the pyroxenites start to melt within 30°C and the amount of melting within 13%. It showed that at low pressure-less than 1 GPa-pyroxenites melt at lower temperatures than peridotites, but as pressure increases, more and more pyroxenites melt at higher temperatures than peridotites. The new model will be a useful tool to understand magma composition, ultimately giving researchers a window into the Earth and the source of oceanic basalts.
Abstract: Gem-quality diamonds have been found in several alluvial deposits across central and southern Borneo. Borneo has been a known source of diamonds for centuries, but the location of their primary igneous source remains enigmatic. Many geological models have been proposed to explain their distribution, including: the diamonds were derived from a local diatreme; they were brought to the surface through ophiolite obduction or exhumation of UHP metamorphic rocks; they were transported long distances southward via major Asian river systems; or, they were transported from the Australian continent before Borneo was rifted from its northwestern margin in the Late Jurassic. To assess these models, we conducted a study of the provenance of heavy minerals from Kalimantan's Cempaka alluvial diamond deposit. This involved collecting U Pb isotopic data, fission track and trace element geochemistry of zircon as well as major element geochemical data of spinels and morphological descriptions of zircon and diamond. The results indicate that the Cempaka diamonds were likely derived from at least two sources, one which was relatively local and/or involved little reworking, and the other more distal which records several periods of reworking. The distal diamond source is interpreted to be diamond-bearing pipes that intruded the basement of a block that: (1) rifted from northwest Australia (East Java or SW Borneo) and the diamonds were recycled into its sedimentary cover, or: (2) were emplaced elsewhere (e.g. NW Australia) and transported to a block (e.g. East Java or SW Borneo). Both of these scenarios require the diamonds to be transported with the block when it rifted from NW Australia in the Late Jurassic. The local source could be diamondiferous diatremes associated with eroded Miocene high-K alkaline intrusions north of the Barito Basin, which would indicate that the lithosphere beneath SW Borneo is thick (~ 150 km or greater). The ‘local’ diamonds could also be associated with ophiolitic rocks that are exposed in the nearby Meratus Mountains.
Contributions to Mineralogy and Petrology, Vol. 171, pp. 51-
Mantle
Geobarometry
Abstract: The stability of the majorite component in garnet has been experimentally investigated at high pressure and high temperature, focusing on the effect of bulk composition and temperature. High-pressure experiments were performed in a multi-anvil apparatus, at pressures ranging from 6 to 14.5 GPa, and temperatures between 1400 and 1700 °C. Experiments were performed in a range of bulk compositions in the system SiO2-Al2O3-Cr2O3-CaO-MgO with varying Cr/(Cr + Al) ratios. The majorite content of garnet gradually increases with pressure, and the composition of the garnet, specifically the Cr/(Cr + Al) ratio, exerts a significant effect on the majorite substitution. We found no significant effect of temperature. We use the experimental results in combination with the literature data to derive two empirical geobarometers, which can be used to determine the equilibration pressure of natural majoritic garnets of peridotitic and eclogitic bulk compositions. The barometer for peridotitic compositions is
P=?77.1+27.6×Si+1.67×Cr
And the barometer for eclogitic compositions is
P=?29.6+11.8×Si+7.81×Na+4.49×Ca.
Examination of diamond stability phase mantle indicator minerals from Leucite Hills, Sweetwater County, Wyoming and Crater of Diamonds State Park, Pike Count, Arkansas.
Geological Society of America, Vol. 48, 3, 1p. Abstract
Journal of South American Earth Sciences, Vol. 70, pp. 162-173.
South America
Craton
Abstract: The Amazonian craton, which covers a large area of South America, and is thought to have been stable since the end of the Mesoproterozoic, has recently benefited from a series of regional geophysical surveys. The Amazonian craton comprises the northern Guyana shield and the southern Central Brazil shield. It has become the main subject of seismological studies aiming to determine crustal thickness. Moho thickness maps that cover a large part of the South American continent summarize these studies. Receiver function studies, aided by surface wave dispersion tomography, were also useful tools applied in the region over the past decade. These have been improved by the addition of temporary and permanent regional seismological arrays and stations. An interesting NNW-SSE Moho depth anomaly, pointing to crustal thickening of up to 60 km in the central Guyana shield and a 50 km thick anomaly of the southern Central Brazil shield were recently identified. Areas with crustal thickening correspond to Paleoproterozoic magmatic arcs. The upper mantle seismic anisotropy in part of the region has been determined from SKS splitting studies. The currently available seismic anisotropy information shows that the orientation of the determined anisotropic axis is related to the frozen in anisotropy hypothesis for the Amazonian craton. The orientation of the anisotropic axis shows no relation to the current South American plate motion in the Amazonian craton. Most recently, detailed information for the two shields has benefited from a series of high-resolution, regional aerogeophysical surveys, made available by CPRM, the Brazilian Geological Survey. In addition to the mentioned contribution from seismology for imaging deeper crustal structures, regional gravity surveys have been expanded, adding to previous Bouguer anomaly maps, and deep drilling information from early exploration efforts have been compiled for the Amazon basin, which covers the Amazonian craton separating the Guyana and Central Brazil shields.
Annals of Operations Research, Vol. 244, 2, pp. 0254-5330.
Global
Economics
Abstract: This paper investigates the relative efficiency of buyers and sellers on the online diamond market using a non-parametric double-frontier setting. Our data consists in a sample of more than 100,000 round cut diamonds offered for sale online. For a given quality defined by a combination of color and clarity grades, we turn to the free disposal hull model to estimate the sets of efficient diamonds respectively for buyers and sellers in the price-weight space. We find that the average bargaining power of buyers is lower than that of sellers. Regression estimates show that the relative efficiency of buyers is reduced for heavier diamonds and when there are many diamonds of the same quality offered for sale.
Abstract: A lamproitic igneous occurrence was recently discovered by a prospector working in the area to the north of Marathon, Ontario. It occurs near a large number of features related to the 1.1 Ga Midcontinent Rift such as the Coldwell Complex and the Trans-Superior Tectonic Zone, but no radiometric dating has been completed on this particular unit of rock. At outcrop level, the unit appears as a collection of metre-scale mafic sills within granitic country rock. These sills appear on all sides of a large lake, marking the lake as the likely location of the main body of the lamproitic rock. The rock is composed of a variety of minerals, including forsteritic olivine, diopside pyroxene, sanidine feldspar, and a variety of spinels. Later periods of magmatism contributed secondary apatite and phlogopite. At the same time, the volatile-rich fluids produced by the magma created a variety of alterations, such as serpentine, chlorite, and carbonate, and heavily disrupted the primary minerals in the rock. This rock retains a classification as a paralamproite, with a mineral assemblage that cannot fulfill the defined composition of lamproite due to geochemical differences between definition and observed samples.
Abstract: Various combinations of diamond, moissanite, zircon, quartz, corundum, rutile, titanite, almandine garnet, kyanite, and andalusite have been recovered from the Dangqiong peridotites. More than 80 grains of diamond have been recovered, most of which are pale yellow to reddish-orange to colorless. The grains are all 100-200 µm in size and mostly anhedral, but with a range of morphologies including elongated, octahedral and subhedral varieties. Their identification was confirmed by a characteristic shift in the Raman spectra between 1325 cm?1 and 1333 cm?1, mostly at 1331.51 cm?1 or 1326.96 cm?1. Integration of the mineralogical, petrological and geochemical data for the Dongqiong peridotites suggests a multi-stage formation for this body and similar ophiolites in the Yarlung-Zangbo suture zone. Chromian spinel grains and perhaps small bodies of chromitite crystallized at various depths in the upper mantle, and encapsulated the UHP, highly reduced and crustal minerals. Some oceanic crustal slabs containing the chromian spinel and their inclusion were later trapped in suprasubduction zones (SSZ), where they were modified by island arc tholeiitic and boninitic magmas, thus changing the chromian spinel compositions and depositing chromitite ores in melt channels.
Yang, J.S., Wirth, R., Wiedenbeck, M., Griffin, W.L., Meng, F.C., Chen, S.Y., Bai, W.J., Xu, X.X., Makeeyev, A.B., Bryanchaniniova, N.I.
Diamonds and highly reduced minerals from chromitite of the Ray-Iz ophiolite of the Polar Urals: deep origin of podiform chromitites and ophiolitic diamonds.
Abstract: Yakutites are coarse (up to 15 mm or larger) aggregates dispersed for more than 500 km around the Popigai meteorite crater. They share many features of similarity with impact diamonds found inside the crater, in elemental and phase compositions, texture, and optical properties as revealed by X-ray photoelectron spectroscopy, X-ray diffraction, and optical spectroscopy (Raman, absorption, luminescence and microscopic) studies. The N3 vibronic system appearing in the luminescence spectra of Popigai impact diamonds (PIDs) indicates a presence of nitrogen impurity and a high-temperature annealing of diamonds that remained in the crater after solid-phase conversion from graphite. Yakutites lack nitrogen-vacancy centers as signatures of annealing, which may indicate quenching at the time of ejection. Thus, both PIDs and yakutites originated during the Popigai impact event and yakutites were ejected to large distances.
Abstract: Series of high-resolution numerical simulations of three-dimensional mantle convection were performed to examine the interaction between the drifting continental lithospheres and the underlying mantle structure for 250 m.y. from the present, and to predict the configuration of the future supercontinent. The density anomaly of the mantle interior was determined by the seismic velocity anomaly from global seismic tomography data sets, which contain well-resolved subducting slabs. The present-day plate motion was imposed for the first stage of the simulation as a velocity boundary condition at the top surface boundary, instead of a shear stress-free condition. The switching time from the plate motion boundary to shear stress-free conditions was taken as a free parameter. The results revealed that Australia, Eurasia, North America, and Africa will merge together in the Northern Hemisphere to form a new supercontinent within ?250 m.y. from the present. The continental drift was assumed to be realized by plate-scale mantle flow, rather than large-scale upwelling plumes. That is, continuously moving plates at the surface for the first stage of the simulation are mechanically coupled with the subducting slabs in the mantle; this enhances the underlying mantle downwelling flow. As a result, persistent continental drift can be reproduced for long future time periods even though top surface boundary conditions may switch in response to shear stress-free conditions. The configuration of the numerically reproduced future supercontinent in this study is broadly consistent with the hypothetical model of Amasia as indicated by previous findings from geological correlations and a paleogeographic reconstruction.
Abstract: Earth and the Moon are shown here to have indistinguishable oxygen isotope ratios, with a difference in ??17O of ?1 ± 5 parts per million (2 standard error). On the basis of these data and our new planet formation simulations that include a realistic model for primordial oxygen isotopic reservoirs, our results favor vigorous mixing during the giant impact and therefore a high-energy, high-angular-momentum impact. The results indicate that the late veneer impactors had an average ??17O within approximately 1 per mil of the terrestrial value, limiting possible sources for this late addition of mass to the Earth-Moon system.
Physics and Chemistry of Minerals, Vol. 42, 9, pp. 707-722.
South America, Brazil
Deposit - Sao-Luis
Abstract: Photoluminescence (PL) spectroscopy and electron paramagnetic resonance (EPR) were used for the first time to characterize properties of superdeep diamonds from the São-Luis alluvial deposits (Brazil). The infrared measurements showed the low nitrogen content (>50 of 87 diamonds from this locality were nitrogen free and belonged to type IIa) and simultaneously the extremely high level of nitrogen aggregation (pure type IaB being predominant), which indicates that diamonds under study might have formed under high pressure and temperature conditions. In most cases, PL features excited at various wavelengths (313, 473, and 532 nm) were indicative of different growth and post-growth processes during which PL centers could be formed via interaction between vacancies and nitrogen atoms. The overall presence of the 490.7 nm, H3, and H4 centers in the luminescence spectra attests to strong plastic deformations in these diamonds. The neutral vacancy known as the GR1 center has probably occurred in a number of crystals due to radiation damage in the post-growth period. The 558.5 nm PL center is found to be one of the most common defects in type IIa samples which is accompanied by the EPR center with g-factor of 2.00285. The 536 and 576 nm vibronic systems totally dominated the PL spectra of superdeep diamonds, while none of “normal” diamonds from the Mir pipe (Yakutia) with similar nitrogen characteristics showed the latter three PL centers.
Abstract: Coalingite, Mg10Fe2(CO3)(OH)24 • 2H2O, rare Mg -Fe hydrous carbonate, has been found in the course of the mineralogical study of a disintegrated kimberlite breccia from the Manchary pipe of the Khompu -May field located in the Tamma Basin, Central Yakutia, 100 km south of Yakutsk. Coalingite occurs as small reddish brown platelets, up to 0.2 mm in size. It is associated with lizardite, chrysotile and brucite, which are typical kimberlitic assemblage. Coalingite is a supergene mineral, but in this case, it is produced by the interaction of brucite-bearing kimberlite and underground water circulating through a vertical or oblique fault zone.
Zedgenizov, D., Rubatto, D., Shatsky, V., Ragozin, A., Kalinina, V.
Eclogitic diamonds from variable crustal protoliths in the northeastern Siberian Craton: trace elements and coupled Delta13C-delta 180 signatures in diamonds and garnet inclusions.
Abstract: Alluvial placers of the northeastern Siberian Platform are characterized by a specific diamond population: regular cuboids, forming a continuous color series from yellowish-green to yellow and dark orange. This is the first comprehensive study of a large number of cuboid diamonds focusing on their morphology, N content and aggregation state, photoluminescence, C isotopic composition and inclusions. The cuboids are cubic (i.e. nearly flat faced) to subrounded crystals; most of them are resorbed. The cathodolominescence images and the birefringence patterns show that many cuboid diamonds record deformation. The cuboid diamonds are characterized by unusual FTIR spectra with the presence of C- (single nitrogen atom) and A- (pair of neighbour nitrogen atoms) centers, and two centers of unknown origin, termed X and Y. The presence of single substitutional nitrogen defects (C centers) in all cuboid diamonds testifies either storage in the mantle at relatively cool conditions or formation just prior to eruption of their host kimberlites. The studied diamonds are also characterized by the presence of specific set of luminescence centers: N3, H3, S1, NVo and NV?, some of which are suggested to have formed during deformation subsequent to diamond growth. The cuboid diamonds show a wide range of carbon isotope compositions from mantle-like values towards strongly 13C depleted compositions (? 6.1 to ? 20.2‰ ?13C). Combined with the finding of an eclogitic sulfide inclusion, the light carbon isotope compositions link the formation of the studied cuboids to deeply subducted basic protoliths, i.e. former oceanic crust.
Abstract: As the most abundant solid phase at depths of 410-525 km, wadsleyite constitutes a large geochemical reservoir in the Earth. To better understand the implications of minor element substitution and cation ordering in wadsleyite, we have synthesized wadsleyites coexisting with pyroxenes with 2-3 wt% of either TiO2, Cr2O3, V2O3, CoO, NiO, or ZnO under hydrous conditions in separate experiments at 1300 °C and 15 GPa. We have refined the crystal structures of these wadsleyites by single-crystal X-ray diffraction, analyzed the compositions by electron microprobe, and estimated M3 vacancy concentration from b/a cell-parameter ratios. According to the crystal structure refinements, Cr and V show strong preferences for M3 over M1 and M2 sites and significant substitution up to 2.9 at% at the tetrahedral site (T site). Ni, Co, and Zn show site preferences similar to those of Fe with M1? M3 > M2 > T. The avoidance of Ni, Co, and Fe for the M2 site in both wadsleyite and olivine appears to be partially controlled by crystal field stabilization energy (CFSE). The estimated CFSE values of Ni2+, Co2+, and Zn2+ at three distinct octahedral sites show a positive correlation with octahedral occupancy ratios [M2/(M1+M3)]. Ti substitutes primarily into the M3 octahedron, rather than M1, M2, or T sites. Ti, Cr, and V each have greater solubility in wadsleyite than in olivine. Therefore these transition metal cations may be enriched in a melt or an accessory phase if hydrous melting occurs on upward convection across the wadsleyite-olivine boundary and may be useful as indicators of high-pressure origin.
Abstract: Continental intraplate basalts (15.42-0.16 Ma) from Abaga-Dalinuoer volcanic field (ADVF) in central Inner Mongolia of eastern China, as a part of Cenozoic volcanic province along eastern margin of the Eurasian continent, provide a good opportunity to explore potential links between deep subduction of the Pacific slab and continental intraplate volcanism. In this study, we report an integrated dataset of whole-rock K-Ar ages, major and trace elements and Sr-Nd-Pb isotopes, and olivine major and minor elements for the Abaga-Dalinuoer basalts (ADBs), and propose that mantle source lithology of the ADB magmas may consist of both pyroxenite and peridotite. The ADBs display low SiO2 (42.3-50.2 wt.%), high MgO (7.3-11.4 wt.%) and moderate K2O + Na2O (3.8-6.4 wt.%), and can be subdivided into basanites, alkali basalts and tholeiitic basalts that are all characterized by ocean island basalt (OIB)-like rare earth elements (REE) and enrichment in both large ion lithosphile elements (LILE) and high field strength elements (HFSE). Olivine phenocrysts have higher Ni and Fe/Mn and lower Mn, Ca and Ca/Fe relative to those from peridotite melts, but exhibit clearly lower Ni contents (< 2500 ppm) compared with expected Ni range (> 3000 ppm) for olivines crystallized from olivine-free pyroxenite melts. Estimated compositions of the ADB primary magmas, together with olivine compositions, suggest an iron-rich mantle source related with silica-deficient pyroxenite that is most likely derived from deeply subducted Pacific oceanic crust. Additionally, peridotite and recent subducted sediments are also required to account for high Ni and MgO in primary magmas together with their trace elements and Sr-Nd-Pb isotope systematics. We suggest that a mixed pyroxenite-peridotite source lithology can better match observed whole-rock and olivine signatures in the ADB, compared with either peridotite only or olivine-free pyroxenite only source lithology. In our model, pyroxenite melts would either react with or mechanically mix with peridotite, and the proportion of pyroxenite melts may range from 30% to 45% for mechanical mixing scenario. A continuous spectrum from tholeiitic to alkali melts revealed by melt-peridotite reaction experiment can explain formation of primary magmas of basanites, alkali basalts and tholeiitic basalts by increasing melting degree of a similar mantle source. Relatively higher 206Pb/204Pb of the ADB may suggest more significant role of recent (< 0.5 Ga) subducted Pacific oceanic materials, in contrast to other Cenozoic basalts in eastern China (e.g., Changbai basalts) that exhibit varying contributions from ancient (> 1.5 Ga) subducted continental sediments. We emphasize that coupled geochemical and geodynamic links (i.e., subduction polarity) between deeply subducted Pacific slab and continental intraplate volcanism in eastern China may exist, which directly support the involvement of deeply subducted Pacific materials in petrogenesis of the ADB. From the perspective of plate motion kinetics, decompression partial melting of upwelling fragmented Pacific slab (silica-deficient pyroxenite + recent subducted sediments) may be triggered by rollback of deeply subducted Pacific slab during Late Cenozoic times. Continental intraplate volcanism in the ADVF generally started with termination of opening of the Japan Sea, suggesting that deep subduction of the Pacific slab may have been an important geodynamic mechanism responsible for tectono-magmatic evolution of northeastern Asia. We suggest that the ADBs have the potential to shed light on genetic links between continental intraplate volcanism and deep subduction of the Pacific slab in geochemical and geodynamic processes.
Geochimica et Cosmochimica Acta, Vol. 186, pp. 207-225.
Mantle
Subduction, melting
Abstract: The subducted continental crust material will be gravitationally trapped in the deep mantle after having been transported to depths of greater than ?250 -300 km (the “depth of no return”). However, little is known about the status of this trapped continental material as well as its contribution to the mantle heterogeneity after achieving thermal equilibrium with the surrounding mantle. Here, we conduct an experimental study over pressure and temperature ranges of 9 -16 GPa and 1300 -1800 °C to constrain the fate of these trapped upper continental crust (UCC). The experimental results show that partial melting will occur in the subducted UCC along normal mantle geotherm to produce K-rich melt. The residual phases composed of coesite/stishovite + clinopyroxene + kyanite in the upper mantle, and stishovite + clinopyroxene + K-hollandite + garnet + CAS-phase in the mantle transition zone (MTZ), respectively. The residual phases achieve densities greater than the surrounding mantle, which provides a driving force for descent across the 410-km seismic discontinuity into the MTZ. However, this density relationship is reversed at the base of the MTZ, leaving the descended residues to be accumulated above the 660-km seismic discontinuity and may contribute to the “second continent”. The melt is ?0.6 -0.7 g/cm3 less dense than the surrounding mantle, which provides a buoyancy force for ascent of melt to shallow depths. The ascending melt, which preserves a significant portion of the bulk-rock rare earth elements (REEs), large ion lithophile elements (LILEs), and high-filed strength elements (HFSEs), may react with the surrounding mantle. Re-melting of the metasomatized mantle may contribute to the origin of the “enriched mantle sources” (EM-sources). Therefore, the deep subducted continental crust may create geochemical/geophysical heterogeneity in Earth’s interior through subduction, stagnation, partial melting and melt segregation.
Geophysical Research Letters, Vol. 43, 8, pp. 3693-3699.
Mantle
Melting
Abstract: Seismic tomography models reveal two large low shear velocity provinces (LLSVPs) that identify large-scale variations in temperature and composition in the deep mantle. Other characteristics include elevated density, elevated bulk sound speed, and sharp boundaries. We show that properties of LLSVPs can be explained by the presence of small quantities (0.3 -3%) of suspended, dense Fe-Ni-S liquid. Trapping of metallic liquid is demonstrated to be likely during the crystallization of a dense basal magma ocean, and retention of such melts is consistent with currently available experimental constraints. Calculated seismic velocities and densities of lower mantle material containing low-abundance metallic liquids match the observed LLSVP properties. Small quantities of metallic liquids trapped at depth provide a natural explanation for primitive noble gas signatures in plume-related magmas. Our model hence provides a mechanism for generating large-scale chemical heterogeneities in Earth's early history and makes clear predictions for future tests of our hypothesis.
Geophysical Research Letters, Vol. 43, 8, pp. 3693-3697.
Mantle
Melting
Abstract: Seismic tomography models reveal two large low shear velocity provinces (LLSVPs) that identify large-scale variations in temperature and composition in the deep mantle. Other characteristics include elevated density, elevated bulk sound speed, and sharp boundaries. We show that properties of LLSVPs can be explained by the presence of small quantities (0.3-3%) of suspended, dense Fe-Ni-S liquid. Trapping of metallic liquid is demonstrated to be likely during the crystallization of a dense basal magma ocean, and retention of such melts is consistent with currently available experimental constraints. Calculated seismic velocities and densities of lower mantle material containing low-abundance metallic liquids match the observed LLSVP properties. Small quantities of metallic liquids trapped at depth provide a natural explanation for primitive noble gas signatures in plume-related magmas. Our model hence provides a mechanism for generating large-scale chemical heterogeneities in Earth's early history and makes clear predictions for future tests of our hypothesis.
Earth and Planetary Science Letters, Vol. 447, pp. 1-9.
Mantle
Water content
Abstract: The electrical conductivity of San Carlos clinopyroxene aggregates with various water contents were measured under Ni -NiO buffer at 1.5 GPa and 600 -1200 K in a DIA-type apparatus. The conductivity increases with increasing water content in clinopyroxene. Hidden conduction mechanism was detected because of the much smaller iron content in clinopyroxene, which was usually covered by small polaron conduction in other nominally anhydrous minerals. The identified activation enthalpies ranged from 0.70 -0.75 eV to 1.23 -1.37 eV. Our result reveals that the dominant charge-carrying species in electrical conductivity could change with temperature and water content. At high temperatures relevant to asthenospheric condition, activation enthalpy for the conductivity agrees well with that for the hydrogen self-diffusion. The dominant charge carrier therefore might be M site vacancy. However, contrary to previous view that all hydrogens contribute to increasing conductivity equally, our result shows that only a limited amount (20% -40%) of hydrogen acts as effective charge carrier in clinopyroxene. On the other hand, the activation enthalpy for the conductivity at low temperatures is significantly lower than that for the hydrogen self-diffusion, similar to what has been observed in olivine and orthopyroxene. This type of conduction is probably caused by fast diffusion of specific hydrogen or fast hydrogen grain boundary diffusion. At low temperatures, the proton conduction of clinopyroxene is nearly one order and two orders of magnitude lower than those of olivine and orthopyroxene, respectively, and tends to converge at high temperatures. Using the present data combined with conductivity of olivine and orthopyroxene, a laboratory-based conductivity-depth profile in the uppermost mantle shows that hydrous clinopyroxene cannot account for the high conductive regions observed beneath the ocean floor near Eastern Pacific Rise. The presence of partial melt would be unavoidable.
Contributions to Mineralogy and Petrology, Vol. 171, 16, 14p.
Mantle
Melting
Abstract: In this paper, we show how the results of phase equilibria calculations in different mantle compositions can be reconciled with the evidence from natural mantle samples. We present data on the response of bulk rock density to pressure (P), temperature (T) and compositional changes in the lithospheric mantle and obtain constraints on the P T evolution recorded by mantle xenoliths. To do this, we examine the mantle xenolith suite from the Quaternary alkali basalts of Pali-Aike, Patagonia, using phase equilibria calculation in six representative compositions. The calculations were done subsolidus and in volatile-free conditions. Our results show that the density change related to the spinel peridotite to garnet peridotite transition is not sharp and strongly depends on the bulk composition. In a depleted mantle composition, this transition is not reflected in the density profile, while in a fertile mantle it leads to a relative increase in density with respect to more depleted compositions. In mantle sections characterized by hot geothermal gradients (~70 mW/m2), the spinel garnet transition may overlap with the lithosphere asthenosphere boundary. Phase equilibria calculations in peridotitic compositions representative of the Pali-Aike mantle were also used to constrain the origin and evolution of the mantle xenoliths. Our results indicate that the mineral modes and compositions, and the mineral zonation reported for the low-temperature peridotites (spinel and spinel + garnet harzburgites and lherzolites), are linked to a cooling event in the mantle which occurred long before the eruption of the host basalts. In addition, our phase equilibria calculations show that kelyphitic rims around garnets, as those observed in the high-temperature garnet peridotites from Pali-Aike, can be explained simply by decompression and do not require additional metasomatic fluid or melt.
Abstract: A new suite of 173 clinopyroxene grains from heavy-mineral concentrates of the diamondiferous Novinka kimberlite (Upper Muna field, Yakutia) has been analyzed for major and minor elements with an electron microprobe to perform a thermobarometric study and model the thermal structure of the Archean Upper Muna lithospheric mantle. Scrupulous evaluation of propagation of analytical uncertainties on pressure estimates revealed that (1) the single-clinopyroxene geobarometer can be very sensitive to analytical uncertainties for particular clinopyroxene compositions, and that (2) most clinopyroxenes from Novinka have compositions that are sensitive to analytical uncertainties, notwithstanding their apparent compositional suitability for single-clinopyroxene thermobarometry based on previously proposed application limits. A test on various mantle clinopyroxenes containing different proportions of the sensitive elements Cr, Na, and Al allowed us to identify clinopyroxene compositions that produce unacceptably high propagated errors and to define appropriate analytical conditions (i.e., higher beam currents and longer counting times for specific elements) that allow precise P-T estimates to be obtained for sensitive compositions. Based on the results of our analytical test, and taking into account the intrinsic limitations of the single-clinopyroxene thermobarometer, we have designed a new protocol for optimum thermobarometry, which uses partly revised compositional filters. The new protocol permits precise computation of the conductive paleogeotherm at Novinka with the single-clinopyroxene thermobarometer of Nimis and Taylor (2000). Thermal modeling of the resulting P-T estimates indicates a ~34 mW/m2 surface heat flow, a thermal lithosphere thickness of ~225 km, and an over 100 km thick “diamond window” beneath Novinka in the middle Paleozoic (344-361 Ma). We estimate that appropriate analytical conditions may extend the applicability of single-clinopyroxene thermobarometry to over 90% of clinopyroxene-bearing garnet peridotites and pyroxenites and to ~70% of chromian-diopside inclusions in diamonds. In all cases, application to clinopyroxenes with Cr/(Cr+Al)mol < 0.1 is not recommended. We confirm the tendency of the single-clinopyroxene barometer to progressively underestimate pressure at P > 4.5 GPa.
Abstract: A unique occurrence of orbicular ijolite is hosted in a matrix of contemporaneous holocrystalline ijolite at the 1.1 Ga Prairie Lake Carbonatite Complex (Marathon, Ontario, Canada), and is the only known occurrence of this textural type in a rock of ijolitic composition. This mineralogical and petrological study of this orbicular ijolite highlights many of the differences from other rare occurrences of orbicular rocks described from carbonatites, granites, diorites and lamprophyres. The orbicules occur along distinct, densely packed bands in equigranular nepheline-rich ijolite and range up to 6 cm in diameter. Macroscopically, the orbicules show variability in the mineralogy of their cores. Detailed imaging of the cores shows evidence of quench textures. Radial outward zoning is common near the cores with concentric banding occurring toward the margins of the orbicules. The mineralogy of the orbicules consists of: nepheline; diopside; calcite; apatite; andradite-melanite garnet; titanite; Fe-rich phlogopite; titaniferous magnetite; perovskite; with secondary natrolite, calcite and cancrinite. The mineralogy of the host ijolite is similar to that of the orbicules. Mineral compositions from the orbicular ijolite and the host ijolite are similar. Within the orbicules, anhedral minerals are found occurring in a ‘matrix’ of garnet throughout the distinct concentric bands. The textures within the concentric bands of the orbicules are best described as annealing recrystallization textures. The rims of the orbicules form interlocking crystals with the host ijolite resulting in near-indistinguishable boundaries. The orbicules are interpreted to represent interaction of a partially-crystallized quenched ijolitic melt, which was in contact with a second pulse of consanguineous ijolite magma. Immersion in the latter resulted in sub-solidus diffusion and annealing recrystallization. Orbicular textures were produced from previously formed quenched ijolite, which was recrystallized producing the monominerallic concentric layers sequentially from the margins toward the center of the orbicule. This proposed model for the formation of orbicular ijolite from Prairie Lake highlights the complexities of these rock types, and supports previous models of magma mixing during the later stages of carbonatite emplacement and crystallization.
Abstract: Although the source rocks of alluvial sapphires in Montana have never been discovered, inclusions and geochemistry of material from this location may give clues to their original source. Mineral inclusions in alluvial Montana sapphires, mainly from Rock Creek, were identified and compared with existing data. Topaz was a remarkable find in one of these samples; other newly identified mineral inclusions in Montana sapphire were allanite, anatase, chalcopyrite, and monazite. Together with the presence of calcium-rich plagioclase, alkali-feldspar, apatite, barite, phlogopite, a pyrochlore-group mineral previously called uranpyrochlore, and chromite/spinel, these inclusions may reflect a metasomatic origin for the sapphires. This is supported by their chemical composition, which largely coincides with sapphires of plumasitic/metasomatic origin. The secondary Montana sapphires analyzed in this study are characterized by mean values of Fe (4686 ppmw), Ti (58 ppmw), Ga (51 ppmw), Mg (35 ppmw), and Cr (21 ppmw). Fe-Mg-Ga ratios help to distinguish them from sapphires with overlapping properties, such as those from Umba, Tanzania, and Rio Mayo, Colombia.
